The read_pageio_init method is just a very convoluted way to grab the
right nfs_pageio_ops vector.  The vector to chose is not a choice of
protocol version, but just a pNFS vs MDS I/O choice that can simply be
done inside nfs_pageio_init_read based on the presence of a layout
driver, and a new force_mds flag to the special case of falling back
to MDS I/O on a pNFS-capable volume.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The write_pageio_init method is just a very convoluted way to grab the
right nfs_pageio_ops vector.  The vector to chose is not a choice of
protocol version, but just a pNFS vs MDS I/O choice that can simply be
done inside nfs_pageio_init_write based on the presence of a layout
driver, and a new force_mds flag to the special case of falling back
to MDS I/O on a pNFS-capable volume.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Make sure to properly invalidate the pagecache before performing direct I/O,
so that no stale pages are left around.  This matches what the generic
direct I/O code does.  Also take the i_mutex over the direct write submission
to avoid the lifelock vs truncate waiting for i_dio_count to decrease, and
to avoid having the pagecache easily repopulated while direct I/O is in
progrss.  Again matching the generic direct I/O code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

We'll need the i_mutex to prevent i_dio_count from incrementing while
truncate is waiting for it to reach zero, and protects against having
the pagecache repopulated after we flushed it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Simple code cleanup to prepare for later fixes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Simple code cleanup to prepare for later fixes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

i_dio_count is used to protect dio access against truncate.  We want
to make sure there are no dio reads pending either when doing a
truncate.  I suspect on plain NFS things might work even without
this, but once we use a pnfs layout driver that access backing devices
directly things will go bad without the proper synchronization.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

We need to have the I/O fully finished before telling the truncate code
that we are done.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

nfs_file_direct_write only updates the inode size if it succeeded and
returned the number of bytes written.  But in the AIO case nfs_direct_wait
turns the return value into -EIOCBQUEUED and we skip the size update.

Instead the aio completion path should updated it, which this patch
does.  The implementation is a little hacky because there is no obvious
way to find out we are called for a write in nfs_direct_complete.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

A fileid in NFS is a uint64. There are some occurrences where dprintk()
outputs a signed fileid. This leads to confusion and more difficult to
read debugging (negative fileids matching positive inode numbers).
Signed-off-by: NNiels de Vos <ndevos@redhat.com>
CC: Santosh Pradhan <spradhan@redhat.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This code doesn't serve any purpose anymore, since the aio retry
infrastructure has been removed.

This change should be safe because aio_read/write are also used for
synchronous IO, and called from do_sync_read()/do_sync_write() - and
there's no looping done in the sync case (the read and write syscalls).
Signed-off-by: NKent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

The NFS DIO code will dirty pages that catch read responses in order to
handle the case where someone is doing DIO reads into an mmapped buffer.
The existing code doesn't really do the right thing though since it
doesn't take into account the case where we might be attempting to read
past the EOF.

Fix the logic in that code to only dirty pages that ended up receiving
data from the read. Note too that it really doesn't matter if
NFS_IOHDR_ERROR is set or not. All that matters is if the page was
altered by the read.

Cc: Fred Isaman <iisaman@netapp.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Eryu provided a test program that would segfault when attempting to read
past the EOF on file that was opened O_DIRECT. The buffer given to the
read() call was on the stack, and when he attempted to read past it it
would scribble over the rest of the stack page.

If we hit the end of the file on a DIO READ request, then we don't want
to zero out the rest of the buffer. These aren't pagecache pages after
all, and there's no guarantee that the buffers that were passed in
represent entire pages.

Cc: <stable@vger.kernel.org> # v3.5+
Cc: Fred Isaman <iisaman@netapp.com>
Reported-by: NEryu Guan <eguan@redhat.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

For buffer write, block layout client scan inode mapping to find
next hole and use offset-to-hole as layoutget length. Object
layout client uses offset-to-isize as layoutget length.

For direct write, both block layout and object layout use dreq->bytes_left.
Signed-off-by: NPeng Tao <tao.peng@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NPeng Tao <tao.peng@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

pnfs_within_mdsthreshold() is called inside pg_init. We need to set
read_io/write_io before that. Otherwise we fail pnfs_within_mdsthreshold()
and IO goes to MDS.
A simple test case:
dd if=foo of=/mnt/pnfs/bar bs=10M count=1 oflag=direct
Signed-off-by: NPeng Tao <tao.peng@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We want to be able to distinguish between allocation failures, and
the case where the lock context is not needed (because there are no
locks).
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Implement the new swapfile a_ops for NFS and hook up ->direct_IO.  This
will set the NFS socket to SOCK_MEMALLOC and run socket reconnect under
PF_MEMALLOC as well as reset SOCK_MEMALLOC before engaging the protocol
->connect() method.

PF_MEMALLOC should allow the allocation of struct socket and related
objects and the early (re)setting of SOCK_MEMALLOC should allow us to
receive the packets required for the TCP connection buildup.

[jlayton@redhat.com: Restore PF_MEMALLOC task flags in all cases]
[dfeng@redhat.com: Fix handling of multiple swap files]
[a.p.zijlstra@chello.nl: Original patch]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Neil Brown <neilb@suse.de>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch exports symbols needed by the v4 module.  In addition, I also
switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or
CONFIG_NFS_V4_MODULE are set.

The module (nfs4.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v4.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch exports symbols and moves over the final structures needed by
the v3 module.  In addition, I also switch over to using IS_ENABLED() to
check if CONFIG_NFS_V3 or CONFIG_NFS_V3_MODULE are set.

The module (nfs3.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v3.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Commit 57208fa7 "NFS: Create an write_pageio_init() function"
did not modify the calls in direct.c, preventing direct io from
using pnfs.  This reintroduces that capability.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Commit 1abb5088 "NFS: Create an read_pageio_init() function"
did not modify the call in direct.c, preventing direct io from
using pnfs.  This reintroduces that capability.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Fix 2 bugs in nfs_direct_write_reschedule:

 - The request needs to be removed from the 'reqs' list before it can
   be added to 'failed'.
 - Fix an infinite loop if the 'failed' list is non-empty.
Reported-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In nfs_direct_write_reschedule(), the requests from nfs_scan_commit_list
have a refcount of 2, whereas the operations in
nfs_direct_write_completion_ops expect them to have a refcount of 1.

This patch adds a call to release the extra references.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

This reverts a hunk from commit 04277086
"NFS: Clean up - Simplify reference counting in fs/nfs/direct.c"

The cleanups in that patch affect the write path, but by the time
processing hits commit the removed reference has been added back by
nfs_scan_commit_list().  Without this reversion, any page that is
sent to commit holds on to an unbalanced reference that is never
freed.  The immediate effect is an imbalance over the wire between
OPENs and CLOSEs.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The new commit code fails to copy the verifier into the wb_verf field
of _all_ the nfs_page structures; it only copies it into the first entry.
The consequence is that most requests end up failing to match in
nfs_commit_release.

Fix is to copy the verifier into the req->wb_verf field in
nfs_write_completion.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

Use the same mechanism as the block devices are using, but move the
helper functions from fs/direct-io.c into fs/inode.c to remove the
dependency on CONFIG_BLOCK.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Fred Isaman <iisaman@netapp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Keep track of the number of bytes read or written via buffered, direct, and
mem-mapped i/o for use by mdsthreshold size_io hints.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

Function rename to ensure that the functionality of nfs_unlock_request()
mirrors that of nfs_lock_request(). Then let nfs_unlock_and_release_request()
do the work of what used to be called nfs_unlock_request()...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

We only have two places where we need to grab a reference when trying
to lock the nfs_page. We're better off making that explicit.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

Fix the following sparse warnings:

fs/nfs/direct.c:221:6: warning: symbol 'nfs_direct_readpage_release' was
not declared. Should it be static?
fs/nfs/read.c:38:43: warning: non-ANSI function declaration of function
'nfs_readhdr_alloc'
fs/nfs/objlayout/objio_osd.c:214:5: warning: symbol '__alloc_objio_seg'
was not declared. Should it be static?
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>

Fix the following compile warnings:
fs/nfs/direct.c: In function 'nfs_direct_read_schedule_segment':
fs/nfs/direct.c:325:11: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
fs/nfs/direct.c:325:11: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
fs/nfs/direct.c:325:11: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
fs/nfs/direct.c:352:27: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
fs/nfs/direct.c: In function 'nfs_direct_write_schedule_segment':
fs/nfs/direct.c:622:11: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
fs/nfs/direct.c:622:11: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
fs/nfs/direct.c:622:11: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
fs/nfs/direct.c:650:27: warning: comparison of distinct pointer types
lacks a cast [enabled by default]
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

Simplify the initialisation of O_DIRECT requests.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

The O_DIRECT code shouldn't need to hold 2 references to each page. The
reference held by the struct nfs_page should suffice.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

Currently we do break out of the for() loop, but we also need to
break out of the enclosing do {} while()...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

v2 doesn't have commits, so this function can be a no-op.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>