This patch adds soc-jack support for adding voltage zones and for
detecting jack type
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NHarsha Priya <priya.harsha@intel.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Move Chip Select control out of the CODEC code for CS4271.
Signed-off-by: NAlexander Sverdlin <subaparts@yandex.ru>
Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Provide driver data for cards within the card structure. To simplify the
implementation of the PM operations we don't use the struct device driver
data as this is used by the core to retrieve the card in callbacks from
the device model and PM core.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>

Allows drivers to distinguish which subsequence is being notified when
they get called back.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>

Could just as well live in sysfs but sysfs doesn't have the simple
value export helpers debugfs does.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>

Allow hookup of cards registered directly with the core to the PM
operations by exporting the device power management operations to
modules, also exporting the default PM operations since it is
expected that most cards will end up using exactly the same setup.

Note that the callbacks require that the driver data for the card be
the snd_soc_card.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>

In order to support cards instantiated without using soc-audio remove
the use of the platform device in the card probe() and remove() ops.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>

The platform device for the card is tied closely to the soc-audio
implementation which we're currently trying to remove in favour of
allowing cards to have their own devices. Begin removing it by
replacing it with the card in the suspend and resume callbacks we
give to cards, also taking the opportunity to remove the legacy
suspend types which are currently hard coded anyway.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>

Current format selection of FSI-codecs depended on platform information for FSI,
and chip default settings for codecs. It is not understandable/formal method.
This patch modify FSI and FSI-codecs to use snd_soc_dai_set_fmt.

But FSI can use I2S/PCM and SPDIF format today.
It can be selected to I2S/PCM by snd_soc_dai_set_fmt, but can not select SPDIF.
So, this patch change FSI platform information to have DAI/SPDIF mode.

If platform selects DAI mode (default),
FSI-codecs can select I2S/PCM by snd_soc_dai_set_fmt,
and if it is SPDIF mode, FSI become SPDIF format.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

We have zero users for PGA controls and the core support for them was
removed a while ago so no point in cut'n'pasting them into new macros,
even if it's too much hassle to update the existing ones.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>

We generally refer to registers as unsigned ints (including in the
underlying CODEC driver operation).
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>

This patch add snd_soc_dai_ops :: set_fmt to FSI driver and
select master/slave clock mode by snd_soc_dai_set_fmt on
fsi-xxx.c instead of platform infomation code.
This patch remove fsi_is_master function which is no longer needed.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch makes it easy to see when the syncing process begins and
ends.  You can also enable the snd_soc_reg_write tracepoint to see
which registers are being synced.
Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Added support for CS4271 codec to ASoC.
Signed-off-by: NAlexander Sverdlin <subaparts@yandex.ru>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Also, update platform_data GPIO handling to have an explicit "don't
touch this pin" option.

Add #defines for the GPIO pin functions.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This is primarily needed to avoid writing back to the cache
whenever we are syncing the cache with the hardware.  This gives a
performance benefit especially for large register maps.
Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Many modern devices have features such as DC servos which take time to start.
Currently these are handled by per-widget events but this makes it difficult
to paralleise operations on multiple widgets, meaning delays can end up
being needlessly serialised. By providing a callback to drivers when all
widgets of a given type have been handled during a DAPM sequence the core
allows drivers to start operations separately and wait for them to complete
much more simply.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>

With larger devices there may be many widgets of the same type in series
in an audio path. Allow drivers to specify an additional level of ordering
within each widget type by adding a subsequence number to widgets and then
splitting operations on widgets so that widgets of the same type but
different sequence numbers are processed separately.  A typical example
would be a supply widget which requires that another widget be enabled
to provide power or clocking.

SND_SOC_DAPM_PGA_S() and SND_SOC_DAPM_SUPPLY_S() macros are provided
allowing this to be used with PGAs and supplies as these are the most
commonly affected widgets.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>

The definition of ECRYPTFS_SUPER_MAGIC has been moved to the include
file 'linux/magic.h' to become available to other kernel subsystems.
Signed-off-by: NRoberto Sassu <roberto.sassu@polito.it>
Signed-off-by: NTyler Hicks <tyhicks@linux.vnet.ibm.com>

The machine driver can't register the card directly and need to do this thru
soc-audio device creation

This patch allows the register and unregister card to be directly called by
machine drivers
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NHarsha Priya <priya.harsha@intel.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The fi_extents_start field of struct fiemap_extent_info is a
user pointer but was not marked as __user. This makes sparse
emit following warnings:

  CHECK   fs/ioctl.c
fs/ioctl.c:114:26: warning: incorrect type in argument 1 (different address spaces)
fs/ioctl.c:114:26:    expected void [noderef] <asn:1>*dst
fs/ioctl.c:114:26:    got struct fiemap_extent *[assigned] dest
fs/ioctl.c:202:14: warning: incorrect type in argument 1 (different address spaces)
fs/ioctl.c:202:14:    expected void const volatile [noderef] <asn:1>*<noident>
fs/ioctl.c:202:14:    got struct fiemap_extent *[assigned] fi_extents_start
fs/ioctl.c:212:27: warning: incorrect type in argument 1 (different address spaces)
fs/ioctl.c:212:27:    expected void [noderef] <asn:1>*dst
fs/ioctl.c:212:27:    got char *<noident>

Also add 'ufiemap' variable to eliminate unnecessary casts.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

In fput_light(), there's an unlikely(fput_needed), which running on
my normal desktop doing firefox, xchat, evolution and part of my distcc farm,
and running the annotate branch profiler shows that the unlikely is not
very unlikely.

 correct incorrect  %        Function             File              Line
 ------- ---------  -        --------             ----              ----
       0       48 100 fput_light                file.h               26
115828710 897415279  88 fput_light              file.h               26
865271179 5286128445  85 fput_light             file.h               26
19568539  8923664  31 fput_light                file.h               26
12353677  3562279  22 fput_light                file.h               26
  267691    67062  20 fput_light                file.h               26
15014853   348172   2 fput_light                file.h               26
  209258      205   0 fput_light                file.h               26
 1364164        0   0 fput_light                file.h               26

Which gives 1032903812 times it was correct and 6203351846 times it was
incorrect, or 85% incorrect.

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Currently all filesystems except XFS implement fallocate asynchronously,
while XFS forced a commit.  Both of these are suboptimal - in case of O_SYNC
I/O we really want our allocation on disk, especially for the !KEEP_SIZE
case where we actually grow the file with user-visible zeroes.  On the
other hand always commiting the transaction is a bad idea for fast-path
uses of fallocate like for example in recent Samba versions.   Given
that block allocation is a data plane operation anyway change it from
an inode operation to a file operation so that we have the file structure
available that lets us check for O_SYNC.

This also includes moving the code around for a few of the filesystems,
and remove the already unnedded S_ISDIR checks given that we only wire
up fallocate for regular files.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* ib_wq is added, which is used as the common workqueue for infiniband
  instead of the system workqueue.  All system workqueue usages
  including flush_scheduled_work() callers are converted to use and
  flush ib_wq.

* cancel_delayed_work() + flush_scheduled_work() converted to
  cancel_delayed_work_sync().

* qib_wq is removed and ib_wq is used instead.

This is to prepare for deprecation of flush_scheduled_work().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Cleanup the formatting of comments, remove some which don't make sense
anymore.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
[fix conflict with 96a608a4]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

pmdp_get_and_clear/pmdp_clear_flush/pmdp_splitting_flush were trapped as
BUG() and they were defined only to diminish the risk of build issues on
not-x86 archs and to be consistent with the generic pte methods previously
defined in include/asm-generic/pgtable.h.

But they are causing more trouble than they were supposed to solve, so
it's simpler not to define them when THP is off.

This is also correcting the export of pmdp_splitting_flush which is
currently unused (x86 isn't using the generic implementation in
mm/pgtable-generic.c and no other arch needs that [yet]).
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After commit 415e12b2 ("PCI/ACPI: Request _OSC control once for each
root bridge (v3)") include/linux/pci-acpi.h is included by
drivers/pci/pcie/aer/aerdrv.c and if CONFIG_ACPI is unset, the bogus and
unnecessary alternative definition of acpi_find_root_bridge_handle()
causes a build error to occur.

Remove the offending piece of garbage.
Reported-and-tested-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of splitting refcount between (per-cpu) mnt_count
and (SMP-only) mnt_longrefs, make all references contribute
to mnt_count again and keep track of how many are longterm
ones.

Accounting rules for longterm count:
	* 1 for each fs_struct.root.mnt
	* 1 for each fs_struct.pwd.mnt
	* 1 for having non-NULL ->mnt_ns
	* decrement to 0 happens only under vfsmount lock exclusive

That allows nice common case for mntput() - since we can't drop the
final reference until after mnt_longterm has reached 0 due to the rules
above, mntput() can grab vfsmount lock shared and check mnt_longterm.
If it turns out to be non-zero (which is the common case), we know
that this is not the final mntput() and can just blindly decrement
percpu mnt_count.  Otherwise we grab vfsmount lock exclusive and
do usual decrement-and-check of percpu mnt_count.

For fs_struct.c we have mnt_make_longterm() and mnt_make_shortterm();
namespace.c uses the latter in places where we don't already hold
vfsmount lock exclusive and opencodes a few remaining spots where
we need to manipulate mnt_longterm.

Note that we mostly revert the code outside of fs/namespace.c back
to what we used to have; in particular, normal code doesn't need
to care about two kinds of references, etc.  And we get to keep
the optimization Nick's variant had bought us...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The physical address is never used by the device tree code when
allocating memory for unflattening.  Change the architecture's alloc
hook to return the virutal address instead.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Unexport do_add_mount() and make ->d_automount() return the vfsmount to be
added rather than calling do_add_mount() itself.  follow_automount() will then
do the addition.

This slightly complicates things as ->d_automount() normally wants to add the
new vfsmount to an expiration list and start an expiration timer.  The problem
with that is that the vfsmount will be deleted if it has a refcount of 1 and
the timer will not repeat if the expiration list is empty.

To this end, we require the vfsmount to be returned from d_automount() with a
refcount of (at least) 2.  One of these refs will be dropped unconditionally.
In addition, follow_automount() must get a 3rd ref around the call to
do_add_mount() lest it eat a ref and return an error, leaving the mount we
have open to being expired as we would otherwise have only 1 ref on it.

d_automount() should also add the the vfsmount to the expiration list (by
calling mnt_set_expiry()) and start the expiration timer before returning, if
this mechanism is to be used.  The vfsmount will be unlinked from the
expiration list by follow_automount() if do_add_mount() fails.

This patch also fixes the call to do_add_mount() for AFS to propagate the mount
flags from the parent vfsmount.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Allow d_manage() to be called from pathwalk when it is in RCU-walk mode as well
as when it is in Ref-walk mode.  This permits __follow_mount_rcu() to call
d_manage() directly.  d_manage() needs a parameter to indicate that it is in
RCU-walk mode as it isn't allowed to sleep if in that mode (but should return
-ECHILD instead).

autofs4_d_manage() can then be set to retain RCU-walk mode if the daemon
accesses it and otherwise request dropping back to ref-walk mode.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Increase the autofs module sub-version so we can tell what kernel
implementation is being used from user space debug logging.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Make NFS use the new d_automount() dentry operation rather than abusing
follow_link() on directories.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add an AT_NO_AUTOMOUNT flag to suppress terminal automounting of automount
point directories.  This can be used by fstatat() users to permit the
gathering of attributes on an automount point and also prevent
mass-automounting of a directory of automount points by ls.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a dentry op (d_manage) to permit a filesystem to hold a process and make it
sleep when it tries to transit away from one of that filesystem's directories
during a pathwalk.  The operation is keyed off a new dentry flag
(DCACHE_MANAGE_TRANSIT).

The filesystem is allowed to be selective about which processes it holds and
which it permits to continue on or prohibits from transiting from each flagged
directory.  This will allow autofs to hold up client processes whilst letting
its userspace daemon through to maintain the directory or the stuff behind it
or mounted upon it.

The ->d_manage() dentry operation:

	int (*d_manage)(struct path *path, bool mounting_here);

takes a pointer to the directory about to be transited away from and a flag
indicating whether the transit is undertaken by do_add_mount() or
do_move_mount() skipping through a pile of filesystems mounted on a mountpoint.

It should return 0 if successful and to let the process continue on its way;
-EISDIR to prohibit the caller from skipping to overmounted filesystems or
automounting, and to use this directory; or some other error code to return to
the user.

->d_manage() is called with namespace_sem writelocked if mounting_here is true
and no other locks held, so it may sleep.  However, if mounting_here is true,
it may not initiate or wait for a mount or unmount upon the parameter
directory, even if the act is actually performed by userspace.

Within fs/namei.c, follow_managed() is extended to check with d_manage() first
on each managed directory, before transiting away from it or attempting to
automount upon it.

follow_down() is renamed follow_down_one() and should only be used where the
filesystem deliberately intends to avoid management steps (e.g. autofs).

A new follow_down() is added that incorporates the loop done by all other
callers of follow_down() (do_add/move_mount(), autofs and NFSD; whilst AFS, NFS
and CIFS do use it, their use is removed by converting them to use
d_automount()).  The new follow_down() calls d_manage() as appropriate.  It
also takes an extra parameter to indicate if it is being called from mount code
(with namespace_sem writelocked) which it passes to d_manage().  follow_down()
ignores automount points so that it can be used to mount on them.

__follow_mount_rcu() is made to abort rcu-walk mode if it hits a directory with
DCACHE_MANAGE_TRANSIT set on the basis that we're probably going to have to
sleep.  It would be possible to enter d_manage() in rcu-walk mode too, and have
that determine whether to abort or not itself.  That would allow the autofs
daemon to continue on in rcu-walk mode.

Note that DCACHE_MANAGE_TRANSIT on a directory should be cleared when it isn't
required as every tranist from that directory will cause d_manage() to be
invoked.  It can always be set again when necessary.

==========================
WHAT THIS MEANS FOR AUTOFS
==========================

Autofs currently uses the lookup() inode op and the d_revalidate() dentry op to
trigger the automounting of indirect mounts, and both of these can be called
with i_mutex held.

autofs knows that the i_mutex will be held by the caller in lookup(), and so
can drop it before invoking the daemon - but this isn't so for d_revalidate(),
since the lock is only held on _some_ of the code paths that call it.  This
means that autofs can't risk dropping i_mutex from its d_revalidate() function
before it calls the daemon.

The bug could manifest itself as, for example, a process that's trying to
validate an automount dentry that gets made to wait because that dentry is
expired and needs cleaning up:

	mkdir         S ffffffff8014e05a     0 32580  24956
	Call Trace:
	 [<ffffffff885371fd>] :autofs4:autofs4_wait+0x674/0x897
	 [<ffffffff80127f7d>] avc_has_perm+0x46/0x58
	 [<ffffffff8009fdcf>] autoremove_wake_function+0x0/0x2e
	 [<ffffffff88537be6>] :autofs4:autofs4_expire_wait+0x41/0x6b
	 [<ffffffff88535cfc>] :autofs4:autofs4_revalidate+0x91/0x149
	 [<ffffffff80036d96>] __lookup_hash+0xa0/0x12f
	 [<ffffffff80057a2f>] lookup_create+0x46/0x80
	 [<ffffffff800e6e31>] sys_mkdirat+0x56/0xe4

versus the automount daemon which wants to remove that dentry, but can't
because the normal process is holding the i_mutex lock:

	automount     D ffffffff8014e05a     0 32581      1              32561
	Call Trace:
	 [<ffffffff80063c3f>] __mutex_lock_slowpath+0x60/0x9b
	 [<ffffffff8000ccf1>] do_path_lookup+0x2ca/0x2f1
	 [<ffffffff80063c89>] .text.lock.mutex+0xf/0x14
	 [<ffffffff800e6d55>] do_rmdir+0x77/0xde
	 [<ffffffff8005d229>] tracesys+0x71/0xe0
	 [<ffffffff8005d28d>] tracesys+0xd5/0xe0

which means that the system is deadlocked.

This patch allows autofs to hold up normal processes whilst the daemon goes
ahead and does things to the dentry tree behind the automouter point without
risking a deadlock as almost no locks are held in d_manage() and none in
d_automount().
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Was-Acked-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a dentry op (d_automount) to handle automounting directories rather than
abusing the follow_link() inode operation.  The operation is keyed off a new
dentry flag (DCACHE_NEED_AUTOMOUNT).

This also makes it easier to add an AT_ flag to suppress terminal segment
automount during pathwalk and removes the need for the kludge code in the
pathwalk algorithm to handle directories with follow_link() semantics.

The ->d_automount() dentry operation:

	struct vfsmount *(*d_automount)(struct path *mountpoint);

takes a pointer to the directory to be mounted upon, which is expected to
provide sufficient data to determine what should be mounted.  If successful, it
should return the vfsmount struct it creates (which it should also have added
to the namespace using do_add_mount() or similar).  If there's a collision with
another automount attempt, NULL should be returned.  If the directory specified
by the parameter should be used directly rather than being mounted upon,
-EISDIR should be returned.  In any other case, an error code should be
returned.

The ->d_automount() operation is called with no locks held and may sleep.  At
this point the pathwalk algorithm will be in ref-walk mode.

Within fs/namei.c itself, a new pathwalk subroutine (follow_automount()) is
added to handle mountpoints.  It will return -EREMOTE if the automount flag was
set, but no d_automount() op was supplied, -ELOOP if we've encountered too many
symlinks or mountpoints, -EISDIR if the walk point should be used without
mounting and 0 if successful.  The path will be updated to point to the mounted
filesystem if a successful automount took place.

__follow_mount() is replaced by follow_managed() which is more generic
(especially with the patch that adds ->d_manage()).  This handles transits from
directories during pathwalk, including automounting and skipping over
mountpoints (and holding processes with the next patch).

__follow_mount_rcu() will jump out of RCU-walk mode if it encounters an
automount point with nothing mounted on it.

follow_dotdot*() does not handle automounts as you don't want to trigger them
whilst following "..".

I've also extracted the mount/don't-mount logic from autofs4 and included it
here.  It makes the mount go ahead anyway if someone calls open() or creat(),
tries to traverse the directory, tries to chdir/chroot/etc. into the directory,
or sticks a '/' on the end of the pathname.  If they do a stat(), however,
they'll only trigger the automount if they didn't also say O_NOFOLLOW.

I've also added an inode flag (S_AUTOMOUNT) so that filesystems can mark their
inodes as automount points.  This flag is automatically propagated to the
dentry as DCACHE_NEED_AUTOMOUNT by __d_instantiate().  This saves NFS and could
save AFS a private flag bit apiece, but is not strictly necessary.  It would be
preferable to do the propagation in d_set_d_op(), but that doesn't normally
have access to the inode.

[AV: fixed breakage in case if __follow_mount_rcu() fails and nameidata_drop_rcu()
succeeds in RCU case of do_lookup(); we need to fall through to non-RCU case after
that, rather than just returning with ungrabbed *path]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Was-Acked-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

drivers/dma/amba-pl08x.c: In function 'pl08x_start_txd':
drivers/dma/amba-pl08x.c:205: warning: dereferencing 'void *' pointer

We never dereference llis_va aside from assigning it to a struct
pl08x_lli pointer or calculating the address of array element 0.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

desc->tx_submit's return type is dma_cookie_t, not int.  Therefore,
dmaengine_submit() should match this return type as it's just
wrapping this detail.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This reverts commit dfe63bb0.

This commit was causing nouveau not to work properly, for -rc1 I'd
prefer it worked and we can look if this is useful for 2.6.39.

Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The compilation of drivers/acpi/pci_root.c fails if
CONFIG_PCIEPORTBUS is unset.  Fix the problem.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>