Host initiated VF FLR may fail if someone else is
already holding a read_lock. Change from down_write_trylock
to down_write to guarantee the reset goes through.
Signed-off-by: NVictor Skvortsov <victor.skvortsov@amd.com>
Reviewed by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

why:
Need interface to lower clocks when in dc (power save)
mode. Must be able to work with p_state unsupported cases
Can cause flicker when OS notifies us of dc state change

how:
added dal3 interface for KMD
added pathway to query smu for this softmax
added blank before clock change to override underflow
added logic to change clk based on pstatesupport and softmax
added logic in prepare/optimize_bw to conform while changing
clocks
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NMartin Leung <Martin.Leung@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
For ODM + MPO window on one half of ODM, only 3 pipes should
be allocated and scaling parameters adjusted to handle this case

[How]
Fix pipe allocation when MPO viewport is only on one side of ODM
split, and modify scaling paramters.
Added diags test cases for ODM + windows MPO, where MPO window is
on right half, left half, and both halves or ODM.
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
If the firmware wasn't reset by PSP or HW and is currently running
then the firmware will hang or perform underfined behavior when we
modify its firmware state underneath it.

[How]
Reset DMCUB before setting up cache windows and performing HW init.
Reviewed-by: NAurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
This workaround resolves underflow caused by incorrect DST_Y_PREFETCH.
Overriding to 192KB DET buf size until the DST_Y_PREFETCH calc is fixed.
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Adding a function to read PSR capabilities
and ALPM capabilities.
Also adding a helper function to validate if
the sink and the driver support PSR SU.
[how]
- isolated all PSR and ALPM reading calls to a separate funciton
- set all required PSR caps
- added a helper function to check if PSR SU is supported by sink
and the driver
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Current error log of dummy irq service doesn't have
src/ext ID info in the log.

[How]
Add src/ext ID in ack/set of dummy irq service.
Reviewed-by: NWayne Lin <Wayne.Lin@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
In order to know the intermediate link rates supported by the eDP
panel and test to select the optimized link rate to save power,
create a new debugfs entry "ilr_setting" for
setting ILR.
Reviewed-by: NAurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NWayne Lin <Wayne.Lin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
SMU now respects the PHY refclk disable request from driver.

This causes a hang during hotplug when PHY refclk was disabled
because it's not being re-enabled and the transmitter control
starts on dc_link_detect.

[How]
We normally would re-enable the clk with exit_optimized_pwr_state
but this is only set on DCN21 and DCN301. Set it for dcn31 as well.

This fixes DMCUB timeouts in the PHY.

Fixes: 64b1d0e8 ("drm/amd/display: Add DCN3.1 HWSEQ")
Reviewed-by: NEric Yang <Eric.Yang2@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

return value form directly instead of
taking this in another redundant variable.
Reported-by: NZeal Robot <zealci@zte.com.cm>
Signed-off-by: Nchiminghao <chi.minghao@zte.com.cn>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This starts to make the formated index much more manageable to the reader.
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NYann Dirson <ydirson@free.fr>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update smu_v13 to match smu_v12 and smu_v11 behavior where this is
fetched from debugfs rather than in kernel logs on every boot.
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This value does not get cached into adev->pm.fw_version during
startup for smu13 like it does for other SMU like smu12.
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This turns previously global functions into static, thus removing
compile-time warnings such as:

 warning: no previous prototype for 'get_highest_allowed_voltage_level'
 [-Wmissing-prototypes]
 742 | unsigned int get_highest_allowed_voltage_level(uint32_t chip_family, uint32_t hw_internal_rev, uint32_t pci_revision_id)
     |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 warning: no previous prototype for 'rv1_vbios_smu_send_msg_with_param'
 [-Wmissing-prototypes]
 102 | int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr, unsigned int msg_id, unsigned int param)
     |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Changes since v1:
- As suggested by Rodrigo Siqueira:
  1. Rewrite function signatures to make them more readable.
  2. Get rid of unused functions in order to remove 'defined but not
     used' warnings.
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NIsabella Basso <isabbasso@riseup.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the struct display_mode_lib pointer instead of passing lots of large
arrays as parameters by value.

Addresses this warning (resulting in failure to build a RHEL debug kernel
with Werror enabled):

../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c: In function ‘UseMinimumDCFCLK’:
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:7478:1: warning: the frame size of 2128 bytes is larger than 2048 bytes [-Wframe-larger-than=]

NOTE: AFAICT this function previously had no observable effect, since it
only modified parameters passed by value and doesn't return anything.
Now it may modify some values in struct display_mode_lib passed in by
reference.
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NMichel Dänzer <mdaenzer@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move code using the Pipe struct to a new helper function.

Works around[0] this warning (resulting in failure to build a RHEL debug
kernel with Werror enabled):

../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c: In function ‘dml31_ModeSupportAndSystemConfigurationFull’:
../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:5740:1: warning: the frame size of 2144 bytes is larger than 2048 bytes [-Wframe-larger-than=]

The culprit seems to be the Pipe struct, so pull the relevant block out
into its own sub-function. (This is porting
commit a62427ef ("drm/amd/display: Reduce stack size for dml21_ModeSupportAndSystemConfigurationFull")
from dml31 to dml21)

[0] AFAICT this doesn't actually reduce the total amount of stack which
can be used, just moves some of it from
dml31_ModeSupportAndSystemConfigurationFull to the new helper function,
so the former happens to no longer exceed the limit for a single
function.
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NMichel Dänzer <mdaenzer@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the warning below:

 warning: Cannot understand  * \file amdgpu_ioc32.c
 on line 2 - I thought it was a doc line

Changes since v1:
- As suggested by Alexander Deucher:
  1. Reduce diff to minimum as this DOC section doesn't provide much
     value.
Signed-off-by: NIsabella Basso <isabbasso@riseup.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This fixes the warnings below, and also drops the display_count
variable, as it's unused.

 In function 'svm_range_map_to_gpu':
 warning: variable 'bo_va' set but not used [-Wunused-but-set-variable]
 1172 |         struct amdgpu_bo_va bo_va;
      |                             ^~~~~
 ...
 In function 'dcn201_update_clocks':
 warning: variable 'enter_display_off' set but not used [-Wunused-but-set-variable]
 132 |         bool enter_display_off = false;
     |              ^~~~~~~~~~~~~~~~~

Changes since v1:
- As suggested by Rodrigo Siqueira:
  1. Drop display_count variable.
- As suggested by Felix Kuehling:
  1. Remove block surrounding amdgpu_xgmi_same_hive.
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NIsabella Basso <isabbasso@riseup.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This commit fixes the compile-time warning below:

 warning: no previous prototype for ‘amdgpu_ras_mca_query_error_status’
 [-Wmissing-prototypes]

Changes since v1:
- As suggested by Alexander Deucher:
  1. Make function static instead of adding prototype.
Signed-off-by: NIsabella Basso <isabbasso@riseup.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

`edp_stream` is only used when backend is enabled on eDP, don't
declare the variable outside that scope.
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There are a few places that this isn't checked that could potentially
be a NULL pointer access.
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For userptr bo, if adev is not in IOMMU isolation mode, RAM direct map
to GPU, multiple GPUs use same system memory dma mapping address, they
can share the original mem->bo in attachment to reduce dma address array
memory usage.
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If host and amdgpu IOMMU is not enabled or IOMMU is pass through mode,
set adev->ram_is_direct_mapped flag which will be used to optimize
memory usage for multi GPU mappings.
Signed-off-by: NPhilip Yang <Philip.Yang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In the DC driver, we have multiple acronyms that are not obvious most of
the time; the same idea is valid for amdgpu. This commit introduces a DC
and amdgpu glossary in order to make it easier to navigate through our
driver.

Changes since V3:
 - Yann: Add new acronyms to amdgpu glossary
 - Daniel: Add link between dc and amdgpu glossary

Changes since V2:
 - Add MMHUB

Changes since V1:
 - Yann: Divide glossary based on driver context.
 - Alex: Make terms more consistent and update CPLIB
 - Add new acronyms to the glossary
Reviewed-by: NYann Dirson <ydirson@free.fr>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This commit describes how DCN works by providing high-level diagrams
with an explanation of each component. In particular, it details the
Global Sync signals.

Change since V2:
 - Add a comment about MMHUBBUB.
Reviewed-by: NYann Dirson <ydirson@free.fr>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Introduce how to collect DTN log from debugfs.
Reviewed-by: NYann Dirson <ydirson@free.fr>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Display core provides a feature that makes it easy for users to debug
Pipe Split. This commit introduces how to use such a debug option.
Reviewed-by: NYann Dirson <ydirson@free.fr>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Display core provides a feature that makes it easy for users to debug
Multiple planes by enabling a visual notification at the bottom of each
plane. This commit introduces how to use such a feature.
Reviewed-by: NYann Dirson <ydirson@free.fr>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Display core documentation is not well organized, and it is hard to find
information due to the lack of sections. This commit reorganizes the
documentation layout, and it is preparation work for future changes.

Changes since V1:
- Christian: Group amdgpu documentation together.
- Daniel: Drop redundant amdgpu prefix.
- Jani: Create index pages.
- Yann: Mirror display folder in the documentation.
Reviewed-by: NYann Dirson <ydirson@free.fr>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SMU firmware expects the driver maintains error context
and doesn't interact with SMU any more when SMU errors
occurred. That will aid in debugging SMU firmware issues.

Add SMU debug option support for this request, it can be
enabled or disabled via amdgpu_smu_debug debugfs file.
Use a 32-bit mask to indicate corresponding debug modes.
Currently, only one mode(HALT_ON_ERROR) is supported.
When enabled, it brings hardware to a kind of halt state
so that no one can touch it any more in the envent of SMU
errors.

The dirver interacts with SMU via sending messages. And
threre are three ways to sending messages to SMU in current
implementation. Handle them respectively as following:

1, smu_cmn_send_smc_msg_with_param() for normal timeout cases

  Halt on any error.

2, smu_cmn_send_msg_without_waiting()/smu_cmn_wait_for_response()
for longer timeout cases

  Halt on errors apart from ETIME. Otherwise this way won't work.
  Let the user handle ETIME error in such a case.

3, smu_cmn_send_msg_without_waiting() for no waiting cases

  Halt on errors apart from ETIME. Otherwise second way won't work.

== Command Guide ==

1, enable HALT_ON_ERROR mode

 # echo 0x1 > /sys/kernel/debug/dri/0/amdgpu_smu_debug

2, disable HALT_ON_ERROR mode

 # echo 0x0 > /sys/kernel/debug/dri/0/amdgpu_smu_debug

v5:
 - Use bit mask to allow more debug features.(Evan)
 - Use WRAN() instead of BUG().(Evan)

v4:
 - Set to halt state instead of a simple hang.(Christian)

v3:
 - Use debugfs_create_bool().(Christian)
 - Put variable into smu_context struct.
 - Don't resend command when timeout.

v2:
 - Resend command when timeout.(Lijo)
 - Use debugfs file instead of module parameter.
Signed-off-by: NLang Yu <lang.yu@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It is useful to maintain error context when debugging
SW/FW issues. Introduce amdgpu_device_halt() for this
purpose. It will bring hardware to a kind of halt state,
so that no one can touch it any more.

Compare to a simple hang, the system will keep stable
at least for SSH access. Then it should be trivial to
inspect the hardware state and see what's going on.

v2:
 - Set adev->no_hw_access earlier to avoid potential crashes.(Christian)
Suggested-by: NChristian Koenig <christian.koenig@amd.com>
Suggested-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NLang Yu <lang.yu@amd.com>
Reviewed-by: NChristian Koenig <christian.koenig@amd.co>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

in case they are not avaiable in early phase
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NLe Ma <Le.Ma@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Leave this bit as hardware default setting
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

should count on GC IP base address
Signed-off-by: NLe Ma <le.ma@amd.com>
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

read and authenticate ip discovery binary getting from
vram first, if it is not valid, read and authenticate
the one getting from file
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To be used to check ip discovery binary signature
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add _from_vram in the funciton name to diffrentiate
the one used to read from file
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To be used when ip_discovery binary is not carried by vbios
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>