Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 22 8月, 2009 1 次提交
    • L
      x86: don't call '->send_IPI_mask()' with an empty mask · b04e6373
      由 Linus Torvalds 提交于 
      As noted in 83d349f3 ("x86: don't send
an IPI to the empty set of CPU's"), some APIC's will be very unhappy
with an empty destination mask.  That commit added a WARN_ON() for that
case, and avoided the resulting problem, but didn't fix the underlying
reason for why those empty mask cases happened.

This fixes that, by checking the result of 'cpumask_andnot()' of the
current CPU actually has any other CPU's left in the set of CPU's to be
sent a TLB flush, and not calling down to the IPI code if the mask is
empty.

The reason this started happening at all is that we started passing just
the CPU mask pointers around in commit 4595f962 ("x86: change
flush_tlb_others to take a const struct cpumask"), and when we did that,
the cpumask was no longer thread-local.

Before that commit, flush_tlb_mm() used to create it's own copy of
'mm->cpu_vm_mask' and pass that copy down to the low-level flush
routines after having tested that it was not empty.  But after changing
it to just pass down the CPU mask pointer, the lower level TLB flush
routines would now get a pointer to that 'mm->cpu_vm_mask', and that
could still change - and become empty - after the test due to other
CPU's having flushed their own TLB's.

See

	http://bugzilla.kernel.org/show_bug.cgi?id=13933

for details.
Tested-by: NThomas Björnell <thomas.bjornell@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b04e6373
  3. 18 3月, 2009 1 次提交
    • S
      x86: add x2apic_wrmsr_fence() to x2apic flush tlb paths · ce4e240c
      由 Suresh Siddha 提交于 
      Impact: optimize APIC IPI related barriers

Uncached MMIO accesses for xapic are inherently serializing and hence
we don't need explicit barriers for xapic IPI paths.

x2apic MSR writes/reads don't have serializing semantics and hence need
a serializing instruction or mfence, to make all the previous memory
stores globally visisble before the x2apic msr write for IPI.

Add x2apic_wrmsr_fence() in flush tlb path to x2apic specific paths.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "steiner@sgi.com" <steiner@sgi.com>
Cc: Nick Piggin <npiggin@suse.de>
LKML-Reference: <1237313814.27006.203.camel@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ce4e240c
  5. 18 2月, 2009 2 次提交
  7. 29 1月, 2009 2 次提交
  9. 21 1月, 2009 5 次提交
    • I
      x86, mm: move tlb.c to arch/x86/mm/ · 55f4949f
      由 Ingo Molnar 提交于 
      Impact: cleanup

Now that it's unified, move the (SMP) TLB flushing code from arch/x86/kernel/
to arch/x86/mm/, where it belongs logically.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      55f4949f
    • T
      x86: rename tlb_64.c to tlb.c · 16c2d3f8
      由 Tejun Heo 提交于 
      Impact: file rename

tlb_64.c is now the tlb code for both 32 and 64.  Rename it to tlb.c.
Signed-off-by: NTejun Heo <tj@kernel.org>
      16c2d3f8
    • T
      x86: make x86_32 use tlb_64.c · 02cf94c3
      由 Tejun Heo 提交于 
      Impact: less contention when issuing invalidate IPI, cleanup

Make x86_32 use the same tlb code as 64bit.  The 64bit code uses
multiple IPI vectors for tlb shootdown to reduce contention.  This
patch makes x86_32 allocate the same 8 IPIs as x86_64 and share the
code paths.

Note that the usage of asmlinkage is inconsistent for x86_32 and 64
and calls for further cleanup.  This has been noted with a FIXME
comment in tlb_64.c.
Signed-off-by: NTejun Heo <tj@kernel.org>
      02cf94c3
    • T
      x86: prepare for tlb merge · 6dd01bed
      由 Tejun Heo 提交于 
      Impact: clean up, ipi vector number reordering for x86_32

Make the following changes to prepare for tlb merge.

* reorder x86_32 ip vectors

* adjust tlb_32.c and tlb_64.c such that their logics coincide exactly
	- on spurious invalidate ipi, tlb_32 acks the irq
	- tlb_64 now has proper memory barriers around clearing
          flush_cpumask (no change in generated code)

* unexport flush_tlb_page from tlb_32.c, there's no user

* use unsigned int for cpu id

* drop unnecessary includes from tlb_64.c
Signed-off-by: NTejun Heo <tj@kernel.org>
      6dd01bed
    • T
      x86: uv cleanup · bdbcdd48
      由 Tejun Heo 提交于 
      Impact: cleanup

Make the following uv related cleanups.

* collect visible uv related definitions and interfaces into uv/uv.h
  and use it.  this cleans up the messy situation where on 64bit, uv
  is defined properly, on 32bit generic it's dummy and on the rest
  undefined.  after this clean up, uv is defined on 64 and dummy on
  32.

* update uv_flush_tlb_others() such that it takes cpumask of
  to-be-flushed cpus as argument, instead of that minus self, and
  returns yet-to-be-flushed cpumask, instead of modifying the passed
  in parameter.  this interface change will ease dummy implementation
  of uv_flush_tlb_others() and makes uv tlb flush related stuff
  defined in tlb_uv proper.
Signed-off-by: NTejun Heo <tj@kernel.org>
      bdbcdd48
  11. 18 1月, 2009 1 次提交
  13. 15 1月, 2009 1 次提交
  15. 14 1月, 2009 2 次提交
  17. 12 1月, 2009 2 次提交
    • M
      SGI UV cpumask: use static temp cpumask in flush_tlb · 0e21990a
      由 Mike Travis 提交于 
      Impact: Improve tlb flush performance for UV

Calling alloc_cpumask_var a zillion times a second does affect
performance.  Replace with static cpumask.

Note: when CONFIG_X86_UV is defined, this extra PER_CPU memory
will be optimized out for non-UV configs as is_uv_system() will
then return a constant 0.
Signed-off-by: NMike Travis <travis@sgi.com>
      0e21990a
    • R
      x86: change flush_tlb_others to take a const struct cpumask · 4595f962
      由 Rusty Russell 提交于 
      Impact: reduce stack usage, use new cpumask API.

This is made a little more tricky by uv_flush_tlb_others which
actually alters its argument, for an IPI to be sent to the remaining
cpus in the mask.

I solve this by allocating a cpumask_var_t for this case and falling back
to IPI should this fail.

To eliminate temporaries in the caller, all flush_tlb_others implementations
now do the this-cpu-elimination step themselves.

Note also the curious "cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask)"
which has been there since pre-git and yet f->flush_cpumask is always zero
at this point.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>
      4595f962
  19. 17 12月, 2008 2 次提交
  21. 06 11月, 2008 1 次提交
  23. 08 7月, 2008 2 次提交
    • C
      SGI UV: TLB shootdown using broadcast assist unit, cleanups · b194b120
      由 Cliff Wickman 提交于 
      TLB shootdown for SGI UV.

v1: 6/2 original
v2: 6/3 corrections/improvements per Ingo's review
v3: 6/4 split atomic operations off to a separate patch (Jeremy's review)
v4: 6/12 include <mach_apic.h> rather than <asm/mach-bigsmp/mach_apic.h>
         (fixes a !SMP build problem that Ingo found)
         fix the index on uv_table_bases[blade]
Signed-off-by: NCliff Wickman <cpw@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b194b120
    • C
      x86, SGI UV: TLB shootdown using broadcast assist unit · 1812924b
      由 Cliff Wickman 提交于 
      TLB shootdown for SGI UV.

Depends on patch (in tip/x86/irq):
   x86-update-macros-used-by-uv-platform.patch   Jack Steiner May 29

This patch provides the ability to flush TLB's in cpu's that are not on
the local node.  The hardware mechanism for distributing the flush
messages is the UV's "broadcast assist unit".

The hook to intercept TLB shootdown requests is a 2-line change to
native_flush_tlb_others() (arch/x86/kernel/tlb_64.c).

This code has been tested on a hardware simulator. The real hardware
is not yet available.

The shootdown statistics are provided through /proc/sgi_uv/ptc_statistics.
The use of /sys was considered, but would have required the use of
many /sys files.  The debugfs was also considered, but these statistics
should be available on an ongoing basis, not just for debugging.

Issues to be fixed later:
- The IRQ for the messaging interrupt is currently hardcoded as 200
  (see UV_BAU_MESSAGE).  It should be dynamically assigned in the future.
- The use of appropriate udelay()'s is untested, as they are a problem
  in the simulator.
Signed-off-by: NCliff Wickman <cpw@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1812924b
  25. 26 6月, 2008 1 次提交
  27. 26 4月, 2008 1 次提交
  29. 25 4月, 2008 1 次提交
  31. 17 4月, 2008 15 次提交