- 29 1月, 2008 40 次提交
-
-
由 Jiri Slaby 提交于
add ath5k wireless driver Portions of this driver are covered by one or both of the ISC and 3-clause BSD licenses. Specific license information is cited at the top of each file. Acked-by and Signed-off-by information is collected from individual patches as collected in the wireless-2.6 tree prior to upstream submission. Acked-by: NMatthew W. S. Bell <mentor@madwifi.org> Acked-by: NMichael Taylor <mike.taylor@apprion.com> Acked-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NBradley M. Kuhn <bkuhn@softwarefreedom.org> Signed-off-by: NBruno Randolf <bruno@thinktube.com> Signed-off-by: NDave Young <hidave.darkstar@gmail.com> Signed-off-by: NFrancesco Gringoli <francesco.gringoli@ing.unibs.it> Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NKaren Sandler <karen@softwarefreedom.org> Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl> Signed-off-by: NLuis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: NMatt Norwood <norwood@softwarefreedom.org> Signed-off-by: NNick Kossifidis <mickflemm@gmail.com> Signed-off-by: NRichard Fontana <fontana@softwarefreedom.org> Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NUlrich Meis <meis@nets.rwth-aachen.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
As suggested in "b43: Remove PIO support"... Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
If the third PCMCIA ID string specifies the MAC chip, the fourth ID string doesn't need to be matched. Even if it's different, it will be compatible with the driver. This ensures that other different revisions of the card will be supported. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes a sparse warning about weird locking. The spinlock is not needed, so simply remove it. This also adds some sanity checks to the PHY and radio locking to protect against recursive locking. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes the PHY routing bit handling. This is needed for N-PHY. No functional change to A-PHY and G-PHY code. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch adds all register definitions for the N-PHY. This adds two new files: nphy.h and nphy.c No functional changes to existing code. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch fixes RX packet alignment issues in the zd1211rw driver. This is based on a patch by Johannes Berg. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Miguel Botón 提交于
This patch fixes a compilation warning in 'iwl-4965.c'. "warning: format ‘%d’ expects type ‘int’, but argument 3 has type ‘long unsigned int’" Signed-off-by: Miguel Botón <mboton@gmail.com Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
rt2500usb and rt73usb store the descriptor in different places. This means we should move the initialization of the 2 pointers to the driver callback function fill_rxdone(). Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Prior to enabling the radio rt2x00lib should go through all rings and for each entry should call the callback function init_txentry() and init_rxentry(). Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Use the MY_BSS descriptor field to determine if the received frame belongs to the same BSS as the interface. This can be used by rxdone to determine if the frame should be updated or not. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Send the skb structure with write_tx_desc() and use the skbdesc structure to read all information about the frame. This saves several arguments in the function definition and it is easier to send more information later as well. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
The packet filter flags don't belong in the interface structure because they are device based instead of interface based. So move the filter fields out of struct interface and into rt2x00_dev. Additionally we shouldn't change the filter based on the working mode, if such a thing is needed than mac80211 should have done that. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
suspend & resume was broken since it called rt2x00mac_start() and rt2x00mac_stop() which would fail to execute because the DEVICE_PRESENT flag was not set. Move the start and stop handlers into rt2x00lib.c which are called from rt2x00mac_start() and rt2x00mac_stop() after they have checked the DEVICE_PRESENT flag, while suspend and resume handlers can directly call those functions. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Store the queue idx inside structure data_ring Store the entry idx inside structure data_entry This saves us a few calls to ARRAY_INDEX() which is now unused. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
These flags used to be fixed to one in rt2500pci_config_type, which caused the beacon timer interrupt to fire. This would lead to rt2x00lib_beacondone adding work which called rt2x00lib_beacondone_scheduled which called ieee80211_beacon_get which printed an error about not having any beacon data. With this patch, these interrupts are only generated when the interface is configured to send beacons. Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Apparently it was possible that ieee80211_stop_queue() was not full while NETDEV_TX_BUSY was being reported back. I think that is what causing the WARN_ON(). This moves all calls to ieee80211_stop_queue() in rt2x00mac.c where it is easier to determine if the queue should be halted. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Initialize blob->data before moving the data pointer Initialize blob->size based on blob->data size This fixes the empty chipset file in debugfs. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes all WARN_ON()s in the attach stage. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds a new Kconfig option for enabling probing of N-PHYs. This option will be removed again once the stuff works. For now it is to help in development. This way real users won't execute the broken N-PHY codepaths, but the developers can easily enable N-PHY stuff. To enable N-PHY probing simply remove the BROKEN dependency and enable the option in the kernel config. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Miguel Botón 提交于
This is just this patch (http://lkml.org/lkml/2007/7/1/51) but adapted to the 'b44' ssb driver. Signed-off-by: NMiguel Botón <mboton@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds some definitions for the MAC Control register and uses them. This basically is no functional change. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Remove b43 PIO support. DMA works well on all supported devices. There's no reason to use PIO. Additionally, new devices don't support PIO in hardware anymore. b43 PIO support is dead and unused code. After applying this patch please do git rm drivers/net/wireless/b43/pio.h git rm drivers/net/wireless/b43/pio.c to remove the main PIO support code. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes chip access validation for newer devices (4318 and up, I think) This patch fixes probing of a PCMCIA based 4318 device. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes antenna selection in b43. It adds a sanity check for the antenna numbers we get from mac80211. This patch depends on ssb: Fix extraction of values from SPROM Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes extraction of some values from the SPROM. It mainly fixes extraction of antenna related values, which is needed for another b43 fix sent later. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
Based on a patch by Miguel. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Cc: Miguel Boton <mboton.lkml@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel Walker 提交于
Reviewing the semaphore usage I noticed these down_interruptible calls. Most of these aren't returning anything, so a caller can't tell if the operation completed or not. prism54_wpa_bss_ie_get() returns zero, but it's treated as the function failing which doesn't seem correct. Signed-off-by: NDaniel Walker <dwalker@mvista.com> Cc: Michael Wu <flamingice@sourmilk.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
This reverts commit e4128a54d790658ab265c915e5da9153ff74af97. On Sunday 02 December 2007 17:17:51 Michael Wu wrote: > CCK and OFDM power levels are stored in adjacent bytes, not nibbles. > This turns out to be true only for rtl8180. On rtl8187, power levels are indeed stored in nibbles, so this patch is wrong. Please revert this patch. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Al Viro 提交于
keep it little-endian, update places that use its members Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Al Viro 提交于
->ring_control_dma is dma_addr_t, needs conversion to little-endian before __raw_writel()... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Al Viro 提交于
Just leave hfa384x_info_frame as-is, don't convert in place. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Al Viro 提交于
sanitize handling of ConfigRid Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-