Add basic pwm attribute support (no auto attributes) to new API.
Reviewed-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Acked-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Acked-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Acked-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Acked-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Acked-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Up to now, each hwmon driver has to implement its own sysfs attributes.
This requires a lot of template code, and distracts from the driver's core
function to read and write chip registers.

To be able to reduce driver complexity, move sensor attribute handling
and thermal zone registration into hwmon core. By using the new API,
driver code and data size is typically reduced by 20-70%, depending
on driver complexity and the number of sysfs attributes supported.

With this patch, the new API only supports thermal sensors. Support for
other sensor types will be added with subsequent patches.
Acked-by: NPunit Agrawal <punit.agrawal@arm.com>
Reviewed-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Ordering include files alphabetically makes it easier to add new ones.
Stop including linux/spinlock.h and linux/kdev_t.h since both are not
needed.
Reviewed-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Simplify code, reduce code size, and drop remove function as no longer
needed.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Instead of repeatedly accessing &pdev->dev, use a local variable dev
instead where possible. Also drop 'dev' from private data since it is
unnecessary.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Use devm_iio_channel_get() instead of iio_channel_get to simplify error
handling and device removal.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Provide support for PSU DPS-460, DPS-800 from Delta Electronics, INC
and for SGD009 from Acbel Polytech, INC.

These devices do not support the STATUS_CML register, and reports a
communication error in response to this command. For this reason,
the status register check is disabled for these controllers.
Signed-off-by: NVadim Pasternak <vadimp@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

If the EXT_TDM bit is set, the chip supports a second temperature sensor
instead of two voltage sensors.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

The lower temperature limit is -128 degrees C. The supported upper limits
are 127.875 or 255.875 degrees C. Also, don't fail if a value outside
the supported range is provided when setting a temperature limit.
Instead, clamp the provided value to the available value range.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Drop some of the SHIFT defines since shift is implied with BIT().
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

The FSF address may change, and providing it does not add any value.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Simplify detecting duplicate include files and finding the right place
for adding new ones.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

The chip reports if remote diodes are present, which can be used for
the fault attrributes.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Writing the update_interval attribute could result in an overflow if
a number close to the maximum unsigned long was written. At the same
time, even though the chip supports setting the conversion rate,
the selected conversion rate was not actually written to the chip.

Fix the second problem by selecting valid (supported) conversion rates,
and writing the selected conversion rate to the chip. This also fixes the
first problem, since arbitrary conversion rates are now converted to
actually supported conversion rates.

Also, set the default chip conversion rate to 1 second. Previously, the
chip was configured for continuous conversion, but readings were only
retrieved every seond, which doesn't make much sense. If we only read a
value from the chip every second, we can as well save some power and only
convert in one-second intervals.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

The driver emits invalid self test error message even though the init
succeeds.
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Fixes: cae8b441 ("tpm: Factor out common startup code")
Reviewed-by: NJames Morris <james.l.morris@oracle.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

Commit e647b532 ("ACPI: Add early device probing infrastructure")
introduced code that allows inserting driver specific
struct acpi_probe_entry probe entries into ACPI linker sections
(one per-subsystem, eg irqchip, clocksource) that are then walked
to retrieve the data and function hooks required to probe the
respective kernel components.

Probing for all entries in a section is triggered through
the __acpi_probe_device_table() function, that in turn, according
to the table ID a given probe entry reports parses the table
with the function retrieved from the respective section structures
(ie struct acpi_probe_entry). Owing to the current ACPI table
parsing implementation, the __acpi_probe_device_table() function
has to share global variables with the acpi_match_madt() function, so
in order to guarantee mutual exclusion locking is required
between the two functions.

Current kernel code implements the locking through the acpi_probe_lock
spinlock; this has the side effect of requiring all code called
within the lock (ie struct acpi_probe_entry.probe_{table/subtbl} hooks)
not to sleep.

However, kernel subsystems that make use of the early probing
infrastructure are relying on kernel APIs that may sleep (eg
irq_domain_alloc_fwnode(), among others) in the function calls
pointed at by struct acpi_probe_entry.{probe_table/subtbl} entries
(eg gic_v2_acpi_init()), which is a bug.

Since __acpi_probe_device_table() is called from context
that is allowed to sleep the acpi_probe_lock spinlock can be replaced
with a mutex; this fixes the issue whilst still guaranteeing
mutual exclusion.
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Fixes: e647b532 (ACPI: Add early device probing infrastructure)
Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Patch 7f1d642f ("drivers/perf: arm-pmu: Fix handling of SPI lacking
interrupt-affinity property") unintended also fixes perf_event support
for bcm2835 which doesn't have PMU interrupts. Unfortunately this change
introduce a NULL pointer dereference on bcm2835, because irq_is_percpu
always expected to be called with a valid IRQ. So fix this regression
by validating the IRQ before.
Tested-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Fixes: 7f1d642f ("drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property")
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

In case of a IRQ type mismatch in of_pmu_irq_cfg() the
device node for interrupt affinity isn't freed. So fix this
issue by calling of_node_put().
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Fixes: fa8ad788 ("arm: perf: factor arm_pmu core out to drivers")
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Fix incorrect condition to identify involvment of a address translation
mechanism.

This bug results in NULL pointer kernel crash dump in cases when mapping
of inbound RapidIO address range is requested within existing aprture.

Link: http://lkml.kernel.org/r/20160901173144.2983-1-alexandre.bounine@idt.comSigned-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Cc: <stable@vger.kernel.org>	[4.6+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert it to the preferred const struct pci_device_id instead.

Link: http://lkml.kernel.org/r/95c5e4100c3cd4eda643624f5b70e8d7abceb86c.1472660229.git.joe@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Otherwise we may miss errors.
Signed-off-by: NChunming Zhou <David1.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

unhalt Instrction Fetch Unit after all rings are inited.
Signed-off-by: NJimQu <Jim.Qu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

SDMA could be fail in the thaw() and restore() processes, do software reset
if each SDMA engine is busy.
Signed-off-by: NJimQu <Jim.Qu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Added devices ids for acces i/o products quad and octal serial cards
that make use of existing Pericom PI7C9X7954 and PI7C9X7958
configurations .
Signed-off-by: NJimi Damon <jdamon@accesio.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since the commit c1a67b48 ("serial: 8250_pci: replace switch-case by
formula for Intel MID"), the 8250 driver crashes in the byt_set_termios()
function with a divide error. This is caused by the fact that a baud rate of 0
(B0) is not handled properly. Fix it by falling back to B9600 in this case.
Reported-by: N"Mendez Salinas, Fernando" <fernando.mendez.salinas@intel.com>
Fixes: c1a67b48 ("serial: 8250_pci: replace switch-case by formula for Intel MID")
Cc: stable@vger.kernel.org
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Serial console is broken in v4.8-rcX. Mika and I independently bisected down to
commit 4ef03d32 ("tty/serial/8250: use mctrl_gpio helpers").

Since neither author nor anyone else didn't propose a solution we better revert
it for now.

This reverts commit 4ef03d32.

Link: https://lkml.kernel.org/r/20160809130229.GN1729@lahna.fi.intel.comSigned-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Falcon Ridge 4C has been supported by the driver from the beginning,
Falcon Ridge 2C support was just added. Don't irritate users with a
warning declaring the opposite.
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NAndreas Noever <andreas.noever@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

From: Xavier Gnata <xavier.gnata@gmail.com>

Add support to INTEL_FALCON_RIDGE_2C controller and corresponding quirk
to support suspend/resume.
Tested against 4.7 master on a MacBook Air 11" 2015.
Signed-off-by: NAndreas Noever <andreas.noever@gmail.com>
Reviewed-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The quirk 'quirk_apple_wait_for_thunderbolt' did not fire on Falcon
Ridge 4C controllers with subdevice/subvendor set to zero. This lead
to lost pci devices on system resume.

Older thunderbolt controllers (pre Falcon Ridge) used the same device id
for bridges and for the controller. On Apple hardware the subvendor- &
subdevice-ids were set for the controller, but not for bridges. So that
is what was used to differentiate between the two. Starting with Falcon
Ridge bridges and controllers received different device ids.
Additionally on some MacBookPro models (but not all) the
subvendor/subdevice was zeroed.

Starting with a42fb351 (thunderbolt: Allow loading of module on recent
Apple MacBooks with thunderbolt 2 controller) the thunderbolt driver
binds to all Falcon Ridge 4C controllers (irregardless of
subvendor/subdevice). The corresponding quirk was not updated.

This commit changes the quirk to check the device class instead of its
subvendor-/subdeviceids. This works for all generations of Thunderbolt
controllers.
Signed-off-by: NAndreas Noever <andreas.noever@gmail.com>
Reviewed-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

lkdtm_rodata_do_nothing() is an empty function which is generated in
order to test the non-executability of rodata.

Currently if function tracing is enabled then an mcount callsite will be
generated for lkdtm_rodata_do_nothing(), and it will appear in the list
of available functions for function tracing (available_filter_functions).

Given it's purpose purely as a test function, it seems preferable for
lkdtm_rodata_do_nothing() to be marked notrace, so it doesn't appear as
traceable.

This also avoids triggering a linker bug on powerpc:

  https://sourceware.org/bugzilla/show_bug.cgi?id=20428

When the linker sees code that needs to generate a call stub, eg. a
branch to mcount(), it assumes the section is executable and
dereferences a NULL pointer leading to a linker segfault. Marking
lkdtm_rodata_do_nothing() notrace avoids triggering the bug because the
function contains no other function calls.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Even if PR3 support is available on the bridge, it will not be used if
the PCI layer considers it unavailable (i.e. on all laptops from 2013
and 2014). Ensure that this condition is checked to allow a fallback to
the Optimus DSM for device poweroff.

Initially I wanted to call pci_d3cold_enable before checking bridge_d3
(in case the user changed d3cold_allowed), but that is such an unlikely
case and likely fragile anyway. The current patch is suggested by Mika
in http://www.spinics.net/lists/linux-pci/msg52599.html

Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NPeter Wu <peter@lekensteyn.nl>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This commit appends a few _rcuidle suffixes to fix the following
RCU-used-from-idle bug:

> ===============================
> [ INFO: suspicious RCU usage. ]
> 4.6.0-rc5-next-20160426+ #1116 Not tainted
> -------------------------------
> include/trace/events/rpm.h:95 suspicious rcu_dereference_check() usage!
>
> other info that might help us debug this:
>
>
> RCU used illegally from idle CPU!
> rcu_scheduler_active = 1, debug_locks = 0
> RCU used illegally from extended quiescent state!
> 1 lock held by swapper/0/0:
>  #0:  (&(&dev->power.lock)->rlock){-.-...}, at: [<c052cc2c>] __rpm_callback+0x58/0x60
>
> stack backtrace:
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1116
> Hardware name: Generic OMAP36xx (Flattened Device Tree)
> [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
> [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
> [<c047fd68>] (dump_stack) from [<c052d5d0>] (rpm_suspend+0x580/0x768)
> [<c052d5d0>] (rpm_suspend) from [<c052ec58>] (__pm_runtime_suspend+0x64/0x84)
> [<c052ec58>] (__pm_runtime_suspend) from [<c04bf25c>] (omap2_gpio_prepare_for_idle+0x5c/0x70)
> [<c04bf25c>] (omap2_gpio_prepare_for_idle) from [<c0125568>] (omap_sram_idle+0x140/0x244)
> [<c0125568>] (omap_sram_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
> [<c01269dc>] (omap3_enter_idle_bm) from [<c0601bdc>] (cpuidle_enter_state+0x80/0x3d4)
> [<c0601bdc>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
> [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
> [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)

In the immortal words of Steven Rostedt, "*Whack* *Whack* *Whack*!!!"
Reported-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
WhACKED-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This commit applies another _rcuidle suffix to fix an RCU use from
idle.

> ===============================
> [ INFO: suspicious RCU usage. ]
> 4.6.0-rc5-next-20160426+ #1122 Not tainted
> -------------------------------
> include/trace/events/rpm.h:69 suspicious rcu_dereference_check() usage!
>
> other info that might help us debug this:
>
>
> RCU used illegally from idle CPU!
> rcu_scheduler_active = 1, debug_locks = 0
> RCU used illegally from extended quiescent state!
> 1 lock held by swapper/0/0:
>  #0:  (&(&dev->power.lock)->rlock){-.-...}, at: [<c052e3dc>] __pm_runtime_resume+0x3c/0x64
>
> stack backtrace:
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1122
> Hardware name: Generic OMAP36xx (Flattened Device Tree)
> [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
> [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
> [<c047fd68>] (dump_stack) from [<c052e178>] (rpm_resume+0x5cc/0x7f4)
> [<c052e178>] (rpm_resume) from [<c052e3ec>] (__pm_runtime_resume+0x4c/0x64)
> [<c052e3ec>] (__pm_runtime_resume) from [<c04bf2c4>] (omap2_gpio_resume_after_idle+0x54/0x68)
> [<c04bf2c4>] (omap2_gpio_resume_after_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
> [<c01269dc>] (omap3_enter_idle_bm) from [<c060198c>] (cpuidle_enter_state+0x80/0x3d4)
> [<c060198c>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
> [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
> [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)
Reported-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Make sure of_device_id tables are NULL terminated.
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Fixes: f56aad1d (cpufreq: dt: Add generic platform-device creation support)
CC: 4.7+ <stable@vger.kernel.org> # 4.7+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The workqueue "dm_bufio_wq" queues a single work item &dm_bufio_work so
it doesn't require execution ordering.  Hence, alloc_workqueue() has
been used to replace the deprecated create_singlethread_workqueue().

The WQ_MEM_RECLAIM flag has been set since DM requires forward progress
under memory pressure.

Since there are fixed number of work items, explicit concurrency
limit is unnecessary here.
Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>