Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 14 10月, 2018 1 次提交
  3. 28 8月, 2018 4 次提交
  5. 31 7月, 2018 6 次提交
  7. 02 7月, 2018 4 次提交
    • M
      wil6210: add support for enhanced DMA debugfs · d98b8539
      由 Maya Erez 提交于 
      Add debugfs support for enhanced DMA TX and RX descriptor rings,
TX and RX status rings and RX buffer management.

Run the following command to print the TX and RX status rings:
cat srings

Run the following command in order to select the status ring:
echo STATUS_RING_IDX > dbg_sring_index

Run the following command in order to select the status message:
echo STATUS_MSG_IDX > dbg_status_msg_index

Run the following command in order to print the selected status
message from the selected status ring:
cat status_msg

Run the following command in order to print the RX buffer management
debug information:
cat rx_buff_mgmt
Signed-off-by: NGidon Studinski <gidons@codeaurora.org>
Signed-off-by: NMaya Erez <merez@codeaurora.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
      d98b8539
    • G
      wil6210: add support for enhanced DMA RX data flows · 7be13fc3
      由 Gidon Studinski 提交于 
      Enhanced DMA RX data path is handled using a single
RX descriptor ring for all VIFs.
Multiple RX status rings are supported, to allow RSS
and multi MSI support.
The driver gets the RX completions via the RX status rings.
The RX status message includes the completed RX buffer ID,
which points to the allocated SKB.

The enhanced DMA RX data flow supports RX chaining, where
multiple SKBs are merged into a single packet.

Enhanced DMA HW supports RX HW reorder offload, enabled by
default for Talyn-MB.

amsdu_en debugfs entry was added to allow control MSDU aggregation.
Use the following command to disable AMSDU (enabled by default):
echo 0 > amsdu_en
Signed-off-by: NGidon Studinski <gidons@codeaurora.org>
Signed-off-by: NMaya Erez <merez@codeaurora.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
      7be13fc3
    • G
      wil6210: initialize TX and RX enhanced DMA rings · 96c93589
      由 Gidon Studinski 提交于 
      Enhanced DMA design includes the following rings:
- Single RX descriptor ring is used for all VIFs
- Multiple RX status rings are supported, to allow RSS
- TX descriptor ring is allocated per connection
- A single TX status ring is used for all TX descriptor rings

This patch initializes and frees the above descriptor and
status rings.

The RX SKBs are handled by a new entity of RX buffers manager,
which handles RX buffers, each one points to an allocated SKB.
During Rx completion processing, the driver extracts a buffer
ID which is used as an index to the buffers array.
After the SKB is freed the buffer is moved from the 'active'
list to the 'free' list, indicating it can be used for another
descriptor. During Rx refill, SKBs are allocated and attached
to 'free' buffers. Those buffers are attached to new descriptors
and moved to the 'active' list.

New debugfs entries were added to allow edma configuration:

Run the following command to configure the number of status rings:
echo NUM_OF_STATUS_RINGS > num_rx_status_rings

Run the following command to use extended RX status message for
additional debug fields from HW:
echo 0 > compressed_rx_status

Run the following command to control the size of the TX status ring:
echo TX_STATUS_RING_ORDER > tx_status_ring_order
The status ring size will be 1 << tx_status_ring_order

Run the following command to control the size of the RX status ring:
echo RX_STATUS_RING_ORDER > rx_status_ring_order
Due to HW constrains RX sring order should be bigger than RX ring order
The status ring size will be 1 << rx_status_ring_order

Run the following command to change the number of RX buffer IDs:
echo RX_BUFF_ID_COUNT > rx_buff_id_count
Signed-off-by: NGidon Studinski <gidons@codeaurora.org>
Signed-off-by: NMaya Erez <merez@codeaurora.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
      96c93589
    • G
      wil6210: add support for enhanced DMA structures · 10590c6a
      由 Gidon Studinski 提交于 
      In enhanced DMA the vrings are handled internally by the FW
and are not exposed to the driver.
Instead, the driver handles descriptor rings, which are mapped
by the FW to vrings.
The completions of the TX and RX descriptors are notified to
the driver using status rings. Each status ring descriptor
includes information of the completed descriptors and the ring id
of their descriptor ring.

This patch changes struct vring to generic wil_ring to allow
its reuse for enhanced DMA descriptor rings and adds the descriptor
and status rings specific descriptors.

The vring debugfs entries have changed as follows:
- dbg_vring_index has changed to dbg_ring_index
- vrings has changed to rings
- vring_idle_trsh has changed to ring_idle_trsh
- vring_index has changed to ring_index
Signed-off-by: NGidon Studinski <gidons@codeaurora.org>
Signed-off-by: NMaya Erez <merez@codeaurora.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
      10590c6a
  9. 12 5月, 2018 3 次提交
  11. 28 2月, 2018 3 次提交
  13. 09 1月, 2018 1 次提交
  15. 02 12月, 2017 3 次提交
  17. 27 10月, 2017 1 次提交
  19. 09 8月, 2017 4 次提交
  21. 21 6月, 2017 1 次提交
  23. 19 5月, 2017 1 次提交
  25. 13 4月, 2017 1 次提交
  27. 28 1月, 2017 5 次提交
  29. 31 8月, 2016 2 次提交