Rather than defining our shadow tables as a list of individual
registers, provide them as a list of register ranges; we'll have some
ranges of multiple registers being added soon (and we already have a
couple adjacent registers that we can squash into a single range now).

This change also defines the table with hex literal values rather than
symbolic register names; since that's how the tables are defined in the
bspec, this change will make it easier to review the tables overall.

v2:
 - Force signed comparison on range overlap sanity check
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NCaz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729152158.2646246-1-matthew.d.roper@intel.com

Although DG2_G10 platforms will always have all SQIDI's present and
don't need steering for registers in a SQIDI MMIO range, this isn't true
for DG2_G11 platforms; only SQIDI's 2 and 3 can be used on those.

We handle SQIDI ranges a bit differently from other types of explicit
steering.  The SQIDI ranges belong to either the MCFG unit or the SF
unit, both of which have their own dedicated steering registers and do
not use the typical 0xFDC steering control that all other types of
ranges use.  Thus we only need to worry about picking a valid initial
value for the MCFG and SF steering registers (0xFD0 and 0xFD8
respectively) at driver init; they won't change after we set them up so
we don't need to worry about re-steering them explicitly at runtime.

Given that any SQIDI value should work fine for DG2-G10 and XeHP SDV,
while only values of 2 and 3 are valid for DG2-G11, we'll just
initialize the MCFG and SF steering registers to a constant value of "2"
for all XeHP-based platforms for simplicity --- that will work in all
cases.

Bspec: 66534
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-6-matthew.d.roper@intel.com

DG2's replicated register ranges are almost the same at XeHP SDV with
the exception of one LNCF sub-range that switches to gslice steering.
We can re-use the XeHP SDV mslice steering table and just provide a
DG2-specific LNCF steering table.

Bspec: 66534
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-5-matthew.d.roper@intel.com

Define and initialize the MMIO ranges for which XeHP SDV requires MSLICE
and LNCF steering.

Bspec: 66534
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-3-matthew.d.roper@intel.com

Xe_HP is more modular than its predecessors and as a consequence it has
more types of replicated registers.  As with l3bank regions on previous
platforms, we may need to explicitly re-steer accesses to these new
types of ranges at runtime if we can't find a single default steering
value that satisfies the fusing of all types.

v2:
 - Add a local 'i915' variable to reduce gt->i915 usage.  (Caz)
 - Drop unused 'intel_gt_read_register' prototype.  (Caz)

v3:
 - Drop unnecessary comment text.  (Lucas)
 - Drop unused register bit definition.  (Lucas)

Bspec: 66534
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-2-matthew.d.roper@intel.com

DG2 supports compute DSS and has the same maximum number of DSS and EU
as XeHP SDV.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NCaz Yokoyama <caz.yokoyama@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-12-matthew.d.roper@intel.com

Due to the removal of legacy slices and the transition to a
gslice/cslice/mslice/etc. design, we'll internally store all DSS under
"slice0."
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NCaz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-10-matthew.d.roper@intel.com

Xe_HP no longer has "slices" in the same way that old platforms did.
There are new concepts (gslices, cslices, mslices) that apply in various
contexts, but for the purposes of fusing slices no longer exist and we
just have one large pool of dual-subslices (DSS) to work with.
Furthermore, the meaning of the DSS fuse is inverted compared to past
platforms --- it now specifies which DSS are enabled rather than which
ones are disabled.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NRadhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: NStuart Summers <stuart.summers@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NPrasad Nallani <prasad.nallani@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-9-matthew.d.roper@intel.com

This feature hands over the control of HW RC6 to the GuC.
GuC decides when to put HW into RC6 based on it's internal
busyness algorithms.

GuCRC needs GuC submission to be enabled, and only
supported on Gen12+ for now.

When GuCRC is enabled, do not set HW RC6. Use a H2G message
to tell GuC to enable GuCRC. When disabling RC6, tell GuC to
revert RC6 control back to KMD. KMD is still responsible for
enabling everything related to Coarse Power Gating though.

v2: Address comments (Michal W)
v3: Don't set hysterisis values when GuCRC is used (Matt Roper)
v4: checkpatch()
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-15-vinay.belgaumkar@intel.com

Tests that exercise the SLPC get/set frequency interfaces.

Clamp_max will set max frequency to multiple levels and check
that SLPC requests frequency lower than or equal to it.

Clamp_min will set min frequency to different levels and check
if SLPC requests are higher or equal to those levels.

v2: Address review comments (Michal W)
v3: Checkpatch() corrections
v4: Remove unnecessary header file (Matthew Brost)
v5: checkpatch() and define const for 50/3 (Matthew Brost)
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-14-vinay.belgaumkar@intel.com

Update the get/set min/max freq hooks to work for
SLPC case as well. Consolidate helpers for requested/min/max
frequency get/set to intel_rps where the proper action can
be taken depending on whether SLPC is enabled.

v2: Add wrappers for getting rp0/1/n frequencies, update
softlimits in set min/max SLPC functions. Also check for
boundary conditions before setting them.

v3: Address review comments (Michal W)

v4: Add helper for host part of intel_rps_set_freq helpers (Michal W)

v5: checkpatch()
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NSujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-13-vinay.belgaumkar@intel.com

Cache rp0, rp1 and rpn platform limits into SLPC structure
for range checking while setting min/max frequencies.

Also add "soft" limits which keep track of frequency changes
made from userland. These are initially set to platform min
and max.

v2: Address review comments (Michal W)
v3: Formatting (Michal W)
v4: Add separate function to parse rp values (Michal W)
v5: Perform range checking for set min/max (Michal W)
v6: checkpatch() and rename static functions (Michal W)
v7: check ret code while setting SLPC limits (Michal W)
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-12-vinay.belgaumkar@intel.com

This interrupt is enabled during RPS initialization, and
now needs to be done by SLPC code. It allows ARAT timer
expiry interrupts to get forwarded to GuC.

v2: Fix comment (Matthew Brost)
v3: checkpatch()
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-11-vinay.belgaumkar@intel.com

This prints out relevant SLPC info from the SLPC shared structure.

We will send a H2G message which forces SLPC to update the
shared data structure with latest information before reading it.

v2: Address review comments (Michal W)
v3: Remove unnecessary tasks from slpc_info (Michal W)
v4: Rename function to intel_guc_slpc_print_info() (Michal W)
v5: checkpatch()
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NSundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-10-vinay.belgaumkar@intel.com

Add helpers to read the min/max frequency being used
by SLPC. This is done by send a H2G command which forces
SLPC to update the shared data struct which can then be
read. These helpers will be used in a sysfs patch later
on.

v2: Address review comments (Michal W)
v3: Return err in case of query failure (Michal W)
v4: Move decode_min/max_freq to this patch
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NSundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-9-vinay.belgaumkar@intel.com

Add param set h2g helpers to set the min and max frequencies
for use by SLPC.

v2: Address review comments (Michal W)
v3: Check for positive error code (Michal W)
v4: Print generic error in set_param (Michal W)
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NSundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-8-vinay.belgaumkar@intel.com

The assumption when it was added was that GT would not be
holding any gt_pm references. However, uc_init is called
from gt_init_hw, which holds a forcewake ref. If SLPC
enable fails, we will still be holding this ref, which will
result in the BUG_ON.
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-7-vinay.belgaumkar@intel.com

Add methods for interacting with GuC for enabling SLPC. Enable
SLPC after GuC submission has been established. GuC load will
fail if SLPC cannot be successfully initialized. Add various
helper methods to set/unset the parameters for SLPC. They can
be set using H2G calls or directly setting bits in the shared
data structure.

v2: Address several review comments, add new helpers for
decoding the SLPC min/max frequencies. Use masks instead of hardcoded
constants. (Michal W)

v3: Split global_state_to_string function, and check for positive
non-zero return value from intel_guc_send() (Michal W)

v4: Optimize the stringify function and other comments (Michal W)

v5: Enable slpc as well before declaring GuC submission status (Michal W)

v6: Checkpatch()
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NSundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-6-vinay.belgaumkar@intel.com

Allocate data structures for SLPC and functions for
initializing on host side.

v2: Address review comments (Michal W)
v3: Remove unnecessary header includes (Michal W)
v4: Rebase
v5: Move allocation of shared data into slpc_init() (Michal W)
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NSundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-5-vinay.belgaumkar@intel.com

Add constants and params that are needed to configure SLPC.

v2: Add a new abi header for SLPC. Replace bitfields with
genmasks. Address other comments from Michal W.

v3: Add slpc H2G format in abi, other review commments (Michal W)

v4: Update status bits according to latest spec

v5: checkpatch()
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NSundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-4-vinay.belgaumkar@intel.com

Also ensure uc_init is called before we initialize RPS so that we
can check for SLPC support. We do not need to enable up/down
interrupts when SLPC is enabled. However, we still need the ARAT
interrupt, which will be enabled separately later.

v2: Explicitly return from intel_rps_enable with slpc check (Matthew B)
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NSundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-3-vinay.belgaumkar@intel.com

Add macros to check for SLPC support. This feature is currently supported
for Gen12+ and enabled whenever GuC submission is enabled/selected.

Include templates for SLPC init/fini and enable.

v2: Move SLPC helper functions to intel_guc_slpc.c/.h. Define
basic template for SLPC structure in intel_guc_slpc_types.h.
Fix copyright (Michal W)

v3: Review comments (Michal W)

v4: Include supported/selected inside slpc struct (Michal W)
Reviewed-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NSundaresan Sujaritha <sujaritha.sundaresan@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-2-vinay.belgaumkar@intel.com

There's a missing sentinel since we are not using ARRAY_SIZE(), but rather
checking that the .start is 0 to stop the iteration in mcr_range().

	BUG: KASAN: global-out-of-bounds in mcr_range.isra.0+0x69/0xa0 [i915]
	Read of size 4 at addr ffffffffa0889928 by task modprobe/3881

Fixes: d8905ba7 ("drm/i915/xehp: Define multicast register ranges")
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730191115.2514581-1-lucas.demarchi@intel.com

Replace all remaining handling of GRAPHICS_VER {==,>=} 10 with
{==,>=} 11. With the removal of CNL, there is no platform with graphics
version equals 10.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728220326.1578242-5-lucas.demarchi@intel.com

With the removal of CNL, let's consider ICL as the first platform using
that index.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728220326.1578242-4-lucas.demarchi@intel.com

CNL is the only platform with GRAPHICS_VER == 10. With its removal we
don't need to handle that version anymore.

Also we can now reduce the max number of slices: the call to
intel_sseu_set_info() with the highest number of slices comes from SKL
and BDW with 3 slices. Recent platforms actually increase the
number of subslices so the number of slices remain 1.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728220326.1578242-3-lucas.demarchi@intel.com

Only one reference to CNL that is not needed, but code is the same for
GEN9_BC, so leave the code around and just remove the special
case for CNL.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728220326.1578242-2-lucas.demarchi@intel.com

No longer used.
Reviewed-by: NJason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-10-daniel.vetter@ffwll.ch

With the global kmem_cache shrink infrastructure gone there's nothing
special and we can convert them over.

I'm doing this split up into each patch because there's quite a bit of
noise with removing the static global.slab_ce to just a
slab_ce.

v2: Make slab static (Jason, 0day)
Reviewed-by: NJason Ekstrand <jason@jlekstrand.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727121037.2041102-4-daniel.vetter@ffwll.ch

Unblock GuC submission on Gen11+ platforms.

v2:
 (Martin Peres / John H)
  - Delete debug message when GuC is disabled by default on certain
    platforms
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-34-matthew.brost@intel.com

Implement a simple static mapping algorithm of the i915 priority levels
(int, -1k to 1k exposed to user) to the 4 GuC levels. Mapping is as
follows:

i915 level < 0          -> GuC low level     (3)
i915 level == 0         -> GuC normal level  (2)
i915 level < INT_MAX    -> GuC high level    (1)
i915 level == INT_MAX   -> GuC highest level (0)

We believe this mapping should cover the UMD use cases (3 distinct user
levels + 1 kernel level).

In addition to static mapping, a simple counter system is attached to
each context tracking the number of requests inflight on the context at
each level. This is needed as the GuC levels are per context while in
the i915 levels are per request.

v2:
 (Daniele)
  - Add BUILD_BUG_ON to enforce ordering of priority levels
  - Add missing lockdep to guc_prio_fini
  - Check for return before setting context registered flag
  - Map DISPLAY priority or higher to highest guc prio
  - Update comment for guc_prio
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-33-matthew.brost@intel.com

Some testing environments and some heavier tests are slower than
previous limits allowed for. For example, it can take multiple seconds
for the 'context has been reset' notification handler to reach the
'kill the requests' code in the 'active' version of the 'reset
engines' test. During which time the selftest gets bored, gives up
waiting and fails the test.

There is also an async thread that the selftest uses to pump work
through the hardware in parallel to the context that is marked for
reset. That also could get bored waiting for completions and kill the
test off.

Lastly, the flush at the of various test sections can also see
timeouts due to the large amount of work backed up. This is also true
of the live_hwsp_read test.
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-32-matthew.brost@intel.com

When GuC submission is enabled, the GuC controls engine resets. Rather
than explicitly triggering a reset, the driver must submit a hanging
context to GuC and wait for the reset to occur.

Conversely, one of the tests specifically sends hanging batches to the
engines but wants them to sit around until a manual reset of the full
GT (including GuC itself). That means disabling GuC based engine
resets to prevent those from killing the hanging batch too soon. So,
add support to the scheduling policy helper for disabling resets as
well as making them quicker!

In GuC submission mode, the 'is engine idle' test basically turns into
'is engine PM wakelock held'. Independently, there is a heartbeat
disable helper function that the tests use. For unexplained reasons,
this acquires the engine wakelock before disabling the heartbeat and
only releases it when re-enabling the heartbeat. As one of the tests
tries to do a wait for idle in the middle of a heartbeat disabled
section, it is therefore guaranteed to always fail. Added a 'no_pm'
variant of the heartbeat helper that allows the engine to be asleep
while also having heartbeats disabled.
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-31-matthew.brost@intel.com

When GuC submission is enabled, the GuC controls engine resets. Rather
than explicitly triggering a reset, the driver must submit a hanging
context to GuC and wait for the reset to occur.
Signed-off-by: NRahul Kumar Singh <rahul.kumar.singh@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-29-matthew.brost@intel.com

When GuC submission is enabled, the GuC controls engine resets. Rather
than explicitly triggering a reset, the driver must submit a hanging
context to GuC and wait for the reset to occur.
Signed-off-by: NRahul Kumar Singh <rahul.kumar.singh@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-28-matthew.brost@intel.com

There are many ways in which the hangcheck selftest can fail. Very few
of them actually printed an error message to say what happened. So,
fill in the missing messages.
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-27-matthew.brost@intel.com

This adds GuC backend support for i915_request_cancel(), which in turn
makes CONFIG_DRM_I915_REQUEST_TIMEOUT work.

This implementation makes use of fence while there are likely simplier
options. A fence was chosen because of another feature coming soon
which requires a user to block on a context until scheduling is
disabled. In that case we return the fence to the user and the user can
wait on that fence.

v2:
 (Daniele)
  - A comment about locking the blocked incr / decr
  - A comments about the use of the fence
  - Update commit message explaining why fence
  - Delete redundant check blocked count in unblock function
  - Ring buffer implementation
  - Comment about blocked in submission path
  - Shorter rpm path
v3:
 (Checkpatch)
  - Fix typos in commit message
 (Daniel)
  - Rework to simplier locking structure in guc_context_block / unblock
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-26-matthew.brost@intel.com

When using GuC submission, if a context gets banned disable scheduling
and mark all inflight requests as complete.

Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-25-matthew.brost@intel.com

The media watchdog mechanism involves GuC doing a silent reset and
continue of the hung context. This requires the i915 driver provide a
golden context to GuC in the ADS.

v2:
 (Matthew Brost):
  - Fix memory corruption in shmem_read
 (John H)
  - Use locals rather than defines for LR_* + SKIP_SIZE
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-24-matthew.brost@intel.com

Added the scheduling policy parameters to the 'guc_info' debugfs state
dump.
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-23-matthew.brost@intel.com