Pull ARM SoC defconfig updates from Olof Johansson:
 "As usual, a bunch of commits, mostly adding drivers and other options
  to defconfigs because it makes sense to have them enabled on various
  development or product boards.  Too much to enumerate each here.

  There's an introduction of a pxa_defconfig, since PXA finally will
  allow building a shared kernel for all boards.  With this, we can
  hopefully remove a bunch of individual defconfigs down the road but it
  requires a bit of real life testing and transition period"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits)
  ARM: Add CONFIG_DEPRECATED_PARAM_STRUCT to netwinder_defconfig
  ARM: multi_v7_defconfig: Add rockchip audio support
  arm: multi_v7_defconfig: Add virtio drivers
  ARM: zx_defconfig: remove CONFIG_MMC_DW_IDMAC
  ARM: versatile: enable the right LEDs
  ARM: pxa: add defconfig covering all the boards
  ARM: versatile: select some defaults in defconfig
  ARM: multi_v7_defconfig: Enable fan, sensors and audio for Odroid XU3
  ARM: bcm2835: enable auxiliary spi driver in defconfig
  ARM: bcm2835: enable all bcm2835-relevant in defconfig
  ARM: default to multi_v7_defconfig
  ARM: multi_v7_defconfig: enable rk808 clkout module
  ARM: multi_v7_defconfig: enable rockchip crypto module
  ARM: multi_v7_defconfig: enable Rockchip io-domain driver
  ARM: multi_v7_defconfig: Enable generic SoC internal OMAP regulators
  ARM: multi_v7_defconfig: Enable AM437x PMIC TPS65218
  ARM: multi_v7_defconfig: enable TPS65217 regulator
  ARM: realview: select apropriate targets
  ARM: defconfig: qcom: Enable SSBI drivers
  ARM: defconfig: Update qcom_defconfig
  ...

Pull ARM 64-bit DT updates from Olof Johansson:
 "This is the first release where we split up the 64-bit contributions a
  bit more, and in particular we are having a separate DT branch for
  them.

  Contents:

   - New devices added to Broadcom NorthStar2
   - Misc fixes for Exynos7 boards
   - QCOM updates for MSM8916
   - Rockchip tweaks for rk3368 SoC and eval board
   - A series of fixes for APM X-Gene v1 and v2
   - Renesas R8A7795 CPU/PSCI additions
   - Marvell Berlin4CT PSCI, cpuidle, watchdog portions
   - Freescale LS1043a SoC and dev board support

  + some treewide or other misc changes"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits)
  dts/ls2080a: Update DTSI to add support of SP805 WDT
  Documentation: DT: Add entry for ARM SP805-WDT
  arm64: dts: X-Gene v2: I2C1 clock is always on
  arm64: dts: X-Gene v1: I2C0 clock is always on
  arm64: dts: Fix to use standard DT node names for X-Gene 1 and X-Gene 2 platforms
  arm64: dts: hikey: add label properties to UARTs
  arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI
  arm64: dts: apq8016-sbc: enable UART0 on LS connector
  arm64: dts: juno: Add idle-states to device tree
  arm64: dts: Added syscon-reboot node for FSL's LS2080A SoC
  arm64: dts: add LS1043a-RDB board support
  arm64: dts: add Freescale LS1043a SoC support
  Documentation: DT: Add entry for Freescale LS1043a-RDB board
  arm64: dts: uniphier: add PH1-LD10 SoC/board support
  arm64: renesas: r8a7795: fix SATA clock assignment
  arm64: dts: salvator-x: Enable SATA controller
  arm64: dts: r8a7795: Add SATA controller node
  arm64: renesas: r8a7795: add internal delay for i2c IPs
  arm64: renesas: salvator-x: Add board part number to DT bindings
  arm64: dts: r8a7795: Add pmu device nodes
  ...

Pull ARM DT updates from Olof Johansson:
 "As usual, the bulk of this release is again DT file contents.

  There's a huge number of changes here, and it's challenging to give a
  crisp overview of just what is in here.  To start with:

  New boards:

   - TI-based DM3730 from LogicPD (Torpedo)
   - Cosmic+ M4 (nommu) initial support (Freescale Vybrid)
   - Raspberry Pi 2 DT files
   - Watchdog on Meson8b
   - Veyron-mickey (ASUS Chromebit) DTS
   - Rockchip rk3228 SoC and eval board
   - Sigma Designs Tango4

  Improvements:

   - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files
   - Misc new devices for Rockchip rk3036 and rk3288
   - Allwinner updates for misc SoCs and systems

  ... and a _large_ number of other changes across the field.  Devices
  added to SoC DTSI and board DTS files for a number of SoC vendors, new
  product boards on already-supported SoCs, cleanups and refactorings of
  existing DTS/DTSI files and a bunch of other changes"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits)
  ARM: dts: compulab: add new board description
  ARM: versatile: add the syscon LEDs to the DT
  dts: vt8500: Fix errors in SDHC node for WM8505
  ARM: dts: imx6q: clean up unused ipu2grp
  ARM: dts: silk: Add compatible property to "partitions" node
  ARM: dts: gose: Add compatible property to "partitions" node
  ARM: dts: porter: Add compatible property to "partitions" node
  ARM: dts: koelsch: Add compatible property to "partitions" node
  ARM: dts: lager: Add compatible property to "partitions" node
  ARM: dts: bockw: Add compatible property to "partitions" node
  ARM: dts: meson8b: Add watchdog node
  Documentation: watchdog: Add new bindings for meson8b
  ARM: meson: Add status LED for Odroid-C1
  ARM: dts: uniphier: fix a typo in comment block
  ARM: bcm2835: Add the auxiliary clocks to the device tree.
  ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B
  ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT.
  ARM: bcm2835: Split the DT for peripherals from the DT for the CPU
  ARM: realview: set up cache correctly on the PB11MPCore
  ARM: dts: Unify G2D device node with other devices on exynos4
  ...

Pull ARM SoC platform updates from Olof Johansson:
 "Updates for new platform support:

   - New platform: Tango4 from Sigma Designs.
   - Broadcom BCM2836 (Raspberry Pi 2 SoC)
   - Enable cpufreq on Freescale i.MX7D
   - Rockchip: SMP support for rk3036, general support for rk3228
   - SMP support on Broadcom Kona and NSP
   - Cleanups for OMAP removing legacy IOMMU data

  + a bunch of misc fixes and tweaks for various platforms"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits)
  ARM: tango: Fix UP build issues
  ARM: tango: pass ARM arch level for smc.S
  ARM: bcm2835: Add Kconfig support for bcm2836
  ARM: OMAP2+: Add support for dm814x and dra62x usb
  ARM: OMAP2+: Add mmc hwmod entries for dm814x
  ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx
  ARM: OMAP2+: Fix SoC detection for dra62x j5-eco
  ARM: tango4: Initial platform support
  ARM: bcm2835: Add a compat string for bcm2836 machine probe
  dt-bindings: Add root properties for Raspberry Pi 2
  ARM: imx: select SRC for i.MX7
  ARM: uniphier: select PINCTRL
  ARM: OMAP2+: Remove device creation for omap-pcm-audio
  ARM: OMAP1: Remove device creation for omap-pcm-audio
  ARM: rockchip: enable support for RK3228 SoCs
  ARM: rockchip: use const and __initconst for rk3036 smp_operations
  ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER
  ARM: BCM: Add SMP support for Broadcom 4708
  ARM: BCM: Add SMP support for Broadcom NSP
  ARM: BCM: Clean up SMP support for Broadcom Kona
  ...

Pull ARM SoC multiplatform code updates from Arnd Bergmann:
 "This branch is the culmination of 5 years of effort to bring the ARMv6
  and ARMv7 platforms together such that they can all be enabled and
  boot the same kernel.  It has been a tremendous amount of cleanup and
  refactoring by a huge number of people, and creation of several new
  (and major) subsystems to better abstract out all the platform details
  in an appropriate manner.

  The bulk of this branch is a large patchset from Arnd that brings
  several of the more minor and older platforms we have closer to
  multiplatform support.  Among these are MMP, S3C64xx, Orion5x, mv78xx0
  and realview Much of this is moving around header files from old mach
  directories, but there are also some cleanup patches of debug_ll
  (lowlevel debug per-platform options) and other parts.

  Linus Walleij also has some patchs to clean up the older ARM Realview
  platforms by finally introducing DT support, and Rob Herring has some
  for ARM Versatile which is now DT-only.  Both of these platforms are
  now multiplatform.

  Finally, a couple of patches from Russell for Dove PMU, and a fix from
  Valentin Rothberg for Exynos ADC, which were rebased on top of the
  series to avoid conflicts"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: realview: don't select SMP_ON_UP for UP builds
  ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
  ARM: s3c64xx: fix pm-debug compilation
  iio: exynos-adc: fix irqf_oneshot.cocci warnings
  ARM: realview: build realview-dt SMP support only when used
  ARM: realview: select apropriate targets
  ARM: realview: clean up header files
  ARM: realview: make all header files local
  ARM: no longer make CPU targets visible separately
  ARM: integrator: use explicit core module options
  ARM: realview: enable multiplatform
  ARM: make default platform work for NOMMU
  ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
  ARM: defconfig: use correct debug_ll settings
  ARM: versatile: convert to multi-platform
  ARM: versatile: merge mach code into a single file
  ARM: versatile: switch to DT only booting and remove legacy code
  ARM: versatile: add DT based PCI detection
  ARM: pxa: mark ezx structures as __maybe_unused
  ARM: pxa: mark raumfeld init functions as __maybe_unused
  ...

Pull ARM SoC cleanups from Olof Johansson:
 "A smallish number of general cleanup commits this release cycle.  Some
  of these are minor tweaks:

   - shmobile change of binding for their GIC (using arm,pl390 now)
   - ARCH_RENESAS introduction
   - Misc other renesas updates

  There's also a couple of treewide commits from Masahiro Yamada
  cleaning up const/__initconst for SMP operation structs and a switch
  to using "depends on" instead of if-constructs on most of the Kconfig
  platform targets"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  staging: board: armadillo800eva: Use "arm,pl390"
  staging: board: kzm9d: Use "arm,pl390"
  ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GIC
  ARM: shmobile: emev2 dtsi: Use "arm,pl390" for GIC
  ARM: shmobile: r8a7740 dtsi: Use "arm,pl390" for GIC
  ARM: shmobile: r7s72100 dtsi: Use "arm,pl390" for GIC
  ARM: use "depends on" for SoC configs instead of "if" after prompt
  ARM/clocksource: use automatic DT probing for ux500 PRCMU
  ARM: use const and __initconst for smp_operations
  ARM: hisi: do not export smp_operations structures
  ARM: mvebu: remove unused mach/gpio.h
  ARM: shmobile: Remove legacy mach/irqs.h
  ARM: shmobile: Introduce ARCH_RENESAS
  MAINTAINERS: Remove link to oss.renesas.com which is closed

Pull non-urgent ARM SoC fixes from Olof Johansson:
 "As usual, we queue up a few fixes that don't seem urgent enough to go
  in through -rc.

   - MAINTAINERS updates to add a list for brcmstb and fix a typo
   - A handful of fixes for OMAP 81xx, a recently resurrected platform
     so these can't be considered real regressions and thus got queued.
   - A couple of other small fixes for scoop, sa1100 and davinci"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data
  ARM: sa1100/simpad: Be sure to clamp return value
  ARM: scoop: Be sure to clamp return value
  ARM: davinci: fix a problematic usage of WARN()
  ARM: davinci: only select WT cache if cache is enabled
  ARM: OMAP2+: Remove useless check for legacy booting for dm814x
  ARM: OMAP2+: Enable GPIO for dm814x
  ARM: dts: Fix dm814x pinctrl address and mask
  ARM: dts: Fix dm8148 control modules ranges
  ARM: OMAP2+: Fix timer entries for dm814x
  ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
  ARM: OMAP2+: Add DPPLS clock manager for dm814x
  clk: ti: Add few dm814x clock aliases
  ARM: dts: Fix dm814x entries for pllss and prcm
  MAINTAINERS: gpio-brcmstb: Remove stray '>'
  MAINTAINERS: brcmstb: Include Broadcom internal mailing-list

Pull asm-generic updates from Arnd Bergmann:
 "The asm-generic tree this time contains one series from Nicolas Pitre
  that makes the optimized do_div() implementation from the ARM
  architecture available to all architectures.

  This also adds stricter type checking for callers of do_div, which has
  uncovered a number of bugs in existing code, and fixes up the ones we
  have found"

* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  ARM: asm/div64.h: adjust to generic codde
  __div64_32(): make it overridable at compile time
  __div64_const32(): abstract out the actual 128-bit cross product code
  do_div(): generic optimization for constant divisor on 32-bit machines
  div64.h: optimize do_div() for power-of-two constant divisors
  mtd/sm_ftl.c: fix wrong do_div() usage
  drm/mgag200/mgag200_mode.c: fix wrong do_div() usage
  hid-sensor-hub.c: fix wrong do_div() usage
  ti/fapll: fix wrong do_div() usage
  ti/clkt_dpll: fix wrong do_div() usage
  tegra/clk-divider: fix wrong do_div() usage
  imx/clk-pllv2: fix wrong do_div() usage
  imx/clk-pllv1: fix wrong do_div() usage
  nouveau/nvkm/subdev/clk/gk20a.c: fix wrong do_div() usage

Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

   - Introduce configfs support for unlocked configfs_depend_item()
     (krzysztof + andrezej)
   - Conversion of usb-gadget target driver to new function registration
     interface (andrzej + sebastian)
   - Enable qla2xxx FC target mode support for Extended Logins (himansu +
     giridhar)
   - Enable qla2xxx FC target mode support for Exchange Offload (himansu +
     giridhar)
   - Add qla2xxx FC target mode irq affinity notification + selective
     command queuing.  (quinn + himanshu)
   - Fix iscsi-target deadlock in se_node_acl configfs deletion (sagi +
     nab)
   - Convert se_node_acl configfs deletion + se_node_acl->queue_depth to
     proper se_session->sess_kref + target_get_session() usage.  (hch +
     sagi + nab)
   - Fix long-standing race between se_node_acl->acl_kref get and
     get_initiator_node_acl() lookup.  (hch + nab)
   - Fix target/user block-size handling, and make sure netlink reaches
     all network namespaces (sheng + andy)

  Note there is an outstanding bug-fix series for remote I_T nexus port
  TMR LUN_RESET has been posted and still being tested, and will likely
  become post -rc1 material at this point"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (56 commits)
  scsi: qla2xxxx: avoid type mismatch in comparison
  target/user: Make sure netlink would reach all network namespaces
  target: Obtain se_node_acl->acl_kref during get_initiator_node_acl
  target: Convert ACL change queue_depth se_session reference usage
  iscsi-target: Fix potential dead-lock during node acl delete
  ib_srpt: Convert acl lookup to modern get_initiator_node_acl usage
  tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage
  tcm_fc: Wait for command completion before freeing a session
  target: Fix a memory leak in target_dev_lba_map_store()
  target: Support aborting tasks with a 64-bit tag
  usb/gadget: Remove set-but-not-used variables
  target: Remove an unused variable
  target: Fix indentation in target_core_configfs.c
  target/user: Allow user to set block size before enabling device
  iser-target: Fix non negative ERR_PTR isert_device_get usage
  target/fcoe: Add tag support to tcm_fc
  qla2xxx: Check for online flag instead of active reset when transmitting responses
  qla2xxx: Set all queues to 4k
  qla2xxx: Disable ZIO at start time.
  qla2xxx: Move atioq to a different lock to reduce lock contention
  ...

Larry Finger reports:
 "My PowerBook G4 Aluminum with a 32-bit PPC processor fails to boot for
  the 4.4-git series".

This is likely due to X still needing /dev/mem access on this platform.

CONFIG_IO_STRICT_DEVMEM is not yet safe to turn on when
CONFIG_STRICT_DEVMEM=y.

Remove the default so that old configurations do not change behavior.

Fixes: 90a545e9 ("restrict /dev/mem to idle io memory ranges")
Reported-by: NLarry Finger <Larry.Finger@lwfinger.net>
Tested-by: NLarry Finger <Larry.Finger@lwfinger.net>
Link: http://marc.info/?l=linux-kernel&m=145332012023825&w=2Acked-by: NKees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull dmaengine fixes from Vinod Koul:
 "Here is my second pull request for this window:

  A few driver fixes have piled up and one missed rcar bindings patch
  which got somehow lost in for-linus branch so cherry-picked that one.

  Fixes are for dw, at_hdmac, edma"

* tag 'dmaengine-fix-4.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: rcar-dmac: Document SoC specific bindings
  dmaengine: at_xdmac: fix resume for cyclic transfers
  dmaengine: dw: fix cyclic transfer callbacks
  dmaengine: dw: fix cyclic transfer setup
  dmaengine: edma: Fix paRAM slot allocation for entry channel 0

Pull misc kbuild updates from Michal Marek:
 - Fix for make O=... perf-tar*
 - make tags revamp and fix for the fallout.  Patch for warnings about
   line breaks inside DEFINE_PER_CPU macros is pending
 - New coccinelle test

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  coccinelle: tests: unsigned value cannot be lesser than zero
  tags: Unify emacs and exuberant rules
  tags: Drop the _PE rule
  tags: Do not try to index defconfigs
  tags: Process Kconfig files in a single pass
  tags: Fix erroneous pattern match in a comment
  aic7xxx: Avoid name collision with <linux/list.h>
  tags: Treat header files as C code
  package Makefile: fix perf-tar targets when outdir is set
  scripts/tags.sh: Teach tags about more powerpc macros

Pull kconfig updates from Michal Marek:
 - Fix for make xconfig segfault
 - Handle long strings in config symbol values
 - Fix for mixing boolean and kconfig ternary type

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: fix qconf segfault by deleting heap objects
  kconfig: return 'false' instead of 'no' in bool function
  kconfig: allow kconfig to handle longer path names

Pull kbuild updates from Michal Marek:
 - Make <modname>-m in makefiles work like <modname>-y and fix the
   fallout
 - Minor genksyms fix
 - Fix race with make -j install modules_install
 - Move -Wsign-compare from make W=1 to W=2
 - Other minor fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Demote 'sign-compare' warning to W=2
  Makefile: revert "Makefile: Document ability to make file.lst and file.S" partially
  kbuild: Do not run modules_install and install in paralel
  genksyms: Handle string literals with spaces in reference files
  fixdep: constify strrcmp arguments
  ath10k: Fix build with CONFIG_THERMAL=m
  Revert "drm: Hack around CONFIG_AGP=m build failures"
  kbuild: Allow to specify composite modules with modname-m
  staging/ad7606: Actually build the interface modules

Mark the FRV architecture orphaned in the MAINTAINERS file.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the mailing list used for development of support for
Renesas SoCs and related drivers.

Up until now the linux-sh mailing list has been used, however,
Renesas SoCs are now much wider than the SH architecture and there
is some desire from some for the linux-sh list to refocus on
discussion of the work on the SH architecture.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: NMagnus Damm <damm@opensource.se>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRich Felker <dalias@libc.org>
Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A newly added tracepoint in the hugepage code uses a variable in the
error handling that is not initialized at that point:

include/trace/events/huge_memory.h:81:230: error: 'isolated' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The result is relatively harmless, as the trace data will in rare
cases contain incorrect data.

This works around the problem by adding an explicit initialization.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: 7d2eba05 ("mm: add tracepoint for scanning pages")
Reviewed-by: NEbru Akagunduz <ebru.akagunduz@gmail.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A recent bug fix added code that does

        bool logged_out = (status & 0xFFFF);
        if (logged_out == CTIO_PORT_LOGGED_OUT)
		...

This looks wrong because we are comparing a boolean with an
integer constant, ang gcc warns about it accordingly:

drivers/scsi/qla2xxx/qla_target.c: In function 'qlt_do_ctio_completion':
drivers/scsi/qla2xxx/qla_target.c:3587:20: warning: comparison of constant '41' with boolean expression is always false [-Wbool-compare]
        (logged_out == CTIO_PORT_LOGGED_OUT) ?

The correct fix is presumably to make that variable an 'int'.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: 71cdc079 ("qla2xxx: Delete session if initiator is gone from FW")
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The current code only allow netlink to reach the initial network namespace,
which caused trouble for any client running inside container.

This patch would make sure TCMU netlink would work for all network
namespaces.
Signed-off-by: NSheng Yang <sheng@yasker.org>
Acked-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch addresses a long standing race where obtaining
se_node_acl->acl_kref in __transport_register_session()
happens a bit too late, and leaves open the potential
for core_tpg_del_initiator_node_acl() to hit a NULL
pointer dereference.

Instead, take ->acl_kref in core_tpg_get_initiator_node_acl()
while se_portal_group->acl_node_mutex is held, and move the
final target_put_nacl() from transport_deregister_session()
into transport_free_session() so that fabric driver login
failure handling using the modern method to still work
as expected.

Also, update core_tpg_get_initiator_node_acl() to take
an extra reference for dynamically generated acls for
demo-mode, before returning to fabric caller.  Also
update iscsi-target sendtargets special case handling
to use target_tpg_has_node_acl() when checking if
demo_mode_discovery == true during discovery lookup.

Note the existing wait_for_completion(&acl->acl_free_comp)
in core_tpg_del_initiator_node_acl() does not change.

Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch converts core_tpg_set_initiator_node_queue_depth()
to use struct se_node_acl->acl_sess_list when performing
explicit se_tpg_tfo->shutdown_session() for active sessions,
in order for new se_node_acl->queue_depth to take effect.

This follows how core_tpg_del_initiator_node_acl() currently
works when invoking se_tpg_tfo->shutdown-session(), and ahead
of the next patch to take se_node_acl->acl_kref during lookup,
the extra get_initiator_node_acl() can go away. In order to
achieve this, go ahead and change target_get_session() to use
kref_get_unless_zero() and propigate up the return value
to know when a session is already being released.

This is because se_node_acl->acl_group is already protecting
se_node_acl->acl_group reference via configfs, and shutdown
within core_tpg_del_initiator_node_acl() won't occur until
sys_write() to core_tpg_set_initiator_node_queue_depth()
attribute returns back to user-space.

Also, drop the left-over iscsi-target hack, and obtain
se_portal_group->session_lock in lio_tpg_shutdown_session()
internally. Remove iscsi-target wrapper and unused se_tpg +
force parameters and associated code.
Reported-by: NChristoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch is a iscsi-target specific bug-fix for a dead-lock
that can occur during explicit struct se_node_acl->acl_group
se_session deletion via configfs rmdir(2), when iscsi-target
time2retain timer is still active.

It changes iscsi-target to obtain se_portal_group->session_lock
internally using spin_in_locked() to check for the specific
se_node_acl configfs shutdown rmdir(2) case.

Note this patch is intended for stable, and the subsequent
v4.5-rc patch converts target_core_tpg.c to use proper
se_sess->sess_kref reference counting for both se_node_acl
deletion + se_node_acl->queue_depth se_session restart.
Reported-by: N: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Merge tag 'platform-drivers-x86-v4.5-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
 "Add intel punit and telemetry driver for APL SoCs.
  Add intel-hid driver for various laptop hotkey support.
  Add asus-wireless radio control driver.
  Keyboard backlight support/improvements for ThinkPads, Vaio, and Toshiba.
  Several hotkey related fixes and improvements for dell and toshiba.
  Fix oops on dual GPU Macs in apple-gmux.
  A few new device IDs and quirks.
  Various minor config related build issues and cleanups.

  surface pro 4:
   - fix compare_const_fl.cocci warnings
   - Add support for Surface Pro 4 Buttons

  platform/x86:
   - Add Intel Telemetry Debugfs interfaces
   - Add Intel telemetry platform device
   - Add Intel telemetry platform driver
   - Add Intel Telemetry Core Driver
   - add NULL check for input parameters
   - add Intel P-Unit mailbox IPC driver
   - update acpi resource structure for Punit

  thinkpad_acpi:
   - Add support for keyboard backlight

  dell-wmi:
   - Process only one event on devices with interface version 0
   - Check if Dell WMI descriptor structure is valid
   - Improve unknown hotkey handling
   - Use a C99-style array for bios_to_linux_keycode

  tc1100-wmi:
   - fix build warning when CONFIG_PM not enabled

  asus-wireless:
   - Add ACPI HID ATK4001
   - Add Asus Wireless Radio Control driver

  asus-wmi:
   - drop to_platform_driver macro

  intel-hid:
   - new hid event driver for hotkeys

  sony-laptop:
   - Keyboard backlight control for some Vaio Fit models

  ideapad-laptop:
   - Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi list

  apple-gmux:
   - Assign apple_gmux_data before registering

  toshiba_acpi:
   - Add rfkill dependency to ACPI_TOSHIBA entry
   - Fix keyboard backlight sysfs entries not being updated
   - Add WWAN RFKill support
   - Add support for WWAN devices
   - Fix blank screen at boot if transflective backlight is supported
   - Propagate the hotkey value via genetlink

  toshiba_bluetooth:
   - Add missing newline in toshiba_bluetooth_present function"

* tag 'platform-drivers-x86-v4.5-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (29 commits)
  surface pro 4: fix compare_const_fl.cocci warnings
  surface pro 4: Add support for Surface Pro 4 Buttons
  platform:x86: Add Intel Telemetry Debugfs interfaces
  platform:x86: Add Intel telemetry platform device
  platform:x86: Add Intel telemetry platform driver
  platform/x86: Add Intel Telemetry Core Driver
  intel_punit_ipc: add NULL check for input parameters
  thinkpad_acpi: Add support for keyboard backlight
  dell-wmi: Process only one event on devices with interface version 0
  dell-wmi: Check if Dell WMI descriptor structure is valid
  tc1100-wmi: fix build warning when CONFIG_PM not enabled
  asus-wireless: Add ACPI HID ATK4001
  platform/x86: Add Asus Wireless Radio Control driver
  asus-wmi: drop to_platform_driver macro
  intel-hid: new hid event driver for hotkeys
  Keyboard backlight control for some Vaio Fit models
  platform/x86: Add rfkill dependency to ACPI_TOSHIBA entry
  platform:x86: add Intel P-Unit mailbox IPC driver
  intel_pmc_ipc: update acpi resource structure for Punit
  ideapad-laptop: Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi list
  ...

Move constants to the right of binary operators.

Generated by: scripts/coccinelle/misc/compare_const_fl.cocci

CC: Weng Xuetian <wengxt@gmail.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Surface Pro 4 buttons are managed by a device with _HID "MSHW0040"
different from Surface Pro 3.

This commit adds MSHW0040 to id list to support the Surface Pro 4.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109871Signed-off-by: NWeng Xuetian <wengxt@gmail.com>
Acked-by: NChen Yu <yu.c.chen@intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

This implements debugfs interfaces for reading the telemetry
samples from SSRAM and configuring firmware trace verbosity.
Interface created under /sys/kernel/debug/telemetry
soc_states: SoC Device and Low Power States
pss_info: Info from the Primary SubSystem
ioss_info: Info from IO SubSusytem
pss_trace_verbosity: Read/Modify PSS F/W trace verbosity
ioss_trace_verbosity: Read/Modify IOSS F/W trace verbosity.
Signed-off-by: NSouvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Telemetry Device is created by the pmc_ipc driver. Resources
are populated according SSRAM region as indicated by the BIOS tables.
Signed-off-by: NSouvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Telemetry platform driver implements the telemetry interfaces.
Currently it supports ApolloLake. It uses the PUNIT and PMC IPC
interfaces to configure the telemetry samples to read.
The samples are read from a Secure SRAM region.
Signed-off-by: NSouvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Intel PM Telemetry is a software mechanism via which various SoC
PM and performance related parameters like PM counters, firmware
trace verbosity, the status of different devices inside the SoC, etc.
can be monitored and analyzed. The different samples that may be
monitored can be configured at runtime via exported APIs.

This patch adds the telemetry core driver that implements basic
exported APIs.
Signed-off-by: NSouvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

intel_punit_ipc_command() maybe called when in or out
data pointers are NULL.
Signed-off-by: NQipeng Zha <qipeng.zha@intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

This patch adds support for controlling keyboard backlight via standard
linux led class interface (::kbd_backlight). It uses ACPI HKEY device with
MLCG and MLCS methods.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Tested-by: NFabio D'Urso <fabiodurso@hotmail.it>
Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

BIOS/ACPI on devices with WMI interface version 0 does not clear buffer
before filling it. So next time when BIOS/ACPI send WMI event which is
smaller as previous then it contains garbage in buffer from previous event.

BIOS/ACPI on devices with WMI interface version 1 clears buffer and
sometimes send more events in buffer at one call.

Since commit 83fc44c3 ("dell-wmi: Update code for processing WMI
events") dell-wmi process all events in buffer (and not just first).

To prevent reading garbage from the buffer we process only the first
event on devices with WMI interface version 0.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Tested-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

After examining existing DSDT ACPI tables of more laptops and looking
into Dell WMI document mentioned in ML dicussion archived at
http://www.spinics.net/lists/platform-driver-x86/msg07220.html we will
parse and check WMI descriptor if contains expected data. It is because
WMI descriptor contains interface version number and it is needed to
know in next commit.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Tested-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Conditionally declare suspend_data on CONFIG_PM to avoid
the following warning when CONFIG_OM is not enabled:

drivers/platform/x86/tc1100-wmi.c:55:27: warning:
  'suspend_data' defined but not used [-Wunused-variable]
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

As reported in https://bugzilla.kernel.org/show_bug.cgi?id=98931#c22 in
the Asus UX31A the Asus Wireless Radio Control device (ASHS) uses the
HID "ATK4001".
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: NTasev Nikola <tasev.stefanoska@skynet.be>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Some Asus notebooks like the Asus E202SA and the Asus X555UB have a
separate ACPI device for notifications from the airplane mode hotkey.
This device is called "Wireless Radio Control" in Asus websites and ASHS
in the DSDT, and its ACPI _HID is ATK4002 in the two models mentioned
above.

For these models, when the airplane mode hotkey (Fn+F2) is pressed, a
query 0x0B is started in the Embedded Controller, and all this query does
is a notify ASHS with the value 0x88 (for acpi_osi >= "Windows 2012"):

	Scope (_SB.PCI0.SBRG.EC0)
	{
		(...)
		Method (_Q0B, 0, NotSerialized)  // _Qxx: EC Query
		{
			If ((MSOS () >= OSW8))
			{
				Notify (ASHS, 0x88) // Device-Specific
			}
			Else
			{
				(...)
			}
		}
	}
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

to_platform_driver has been defined in platform_device.h, so drop
this repetitive macro in asus-wmi.c.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

This driver supports various HID events including hotkeys.
Dell XPS 13 9350 requires it for the wireless hotkey.
Signed-off-by: NAlex Hung <alex.hung@canonical.com>
Reviewed-and-tested-by: NAndy Lutomirski <luto@kernel.org>

[dvhart: Kconfig help typo fix and INPUT_SPARSEKMAP fix from Sedat Dilek]
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Pull security subsystem update from James Morris:
 "A CVE fix and a maintainers file update"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  KEYS: Fix keyring ref leak in join_session_keyring()
  Fix the MAINTAINERS record for the certs/ directory

This fixes CVE-2016-0728.

If a thread is asked to join as a session keyring the keyring that's already
set as its session, we leak a keyring reference.

This can be tested with the following program:

	#include <stddef.h>
	#include <stdio.h>
	#include <sys/types.h>
	#include <keyutils.h>

	int main(int argc, const char *argv[])
	{
		int i = 0;
		key_serial_t serial;

		serial = keyctl(KEYCTL_JOIN_SESSION_KEYRING,
				"leaked-keyring");
		if (serial < 0) {
			perror("keyctl");
			return -1;
		}

		if (keyctl(KEYCTL_SETPERM, serial,
			   KEY_POS_ALL | KEY_USR_ALL) < 0) {
			perror("keyctl");
			return -1;
		}

		for (i = 0; i < 100; i++) {
			serial = keyctl(KEYCTL_JOIN_SESSION_KEYRING,
					"leaked-keyring");
			if (serial < 0) {
				perror("keyctl");
				return -1;
			}
		}

		return 0;
	}

If, after the program has run, there something like the following line in
/proc/keys:

3f3d898f I--Q---   100 perm 3f3f0000     0     0 keyring   leaked-keyring: empty

with a usage count of 100 * the number of times the program has been run,
then the kernel is malfunctioning.  If leaked-keyring has zero usages or
has been garbage collected, then the problem is fixed.
Reported-by: NYevgeny Pats <yevgeny@perception-point.io>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NDon Zickus <dzickus@redhat.com>
Acked-by: NPrarit Bhargava <prarit@redhat.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>