Pull libata updates from Tejun Heo:
 - Write same support added
 - Minor ahci MSIX irq handling updates
 - Non-critical SCSI command translation fixes
 - Controller specific changes

* 'for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
  libata: remove <asm-generic/libata-portmap.h>
  libata: remove unused definitions from <asm/libata-portmap.h>
  pata_at91: Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
  ata: Replace BUG() with BUG_ON().
  ata: sata_mv: Replacing dma_pool_alloc and memset with a single call dma_pool_zalloc.
  libata: Some drives failing on SCT Write Same
  ahci: use pci_alloc_irq_vectors
  libata: SCT Write Same handle ATA_DFLAG_PIO
  libata: SCT Write Same / DSM Trim
  libata: Add support for SCT Write Same
  libata: Safely overwrite attached page in WRITE SAME xlat
  ahci: also use a per-port lock for the multi-MSIX case
  ARM: dts: STiH407-family: Add ports-implemented property in sata nodes
  ahci: st: Add ports-implemented property in support
  ahci: qoriq: enable snoopable sata read and write
  ahci: qoriq: adjust sata parameter
  libata-scsi: fix MODE SELECT translation for Control mode page
  libata-scsi: use u8 array to store mode page copy

Pull more SCSI updates from James Bottomley:
 "This is just a set of minor updates and fixes which weren't quite
  ready in time for the first pull request.

  The only real thing of note is Mike Christie is stepping down as
  Maintainer of iscsi to be replaced by Lee Duncan and Chris Leech"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: Kconfig fix
  scsi: g_NCR5380: Stop using scsi_module.c
  scsi: g_NCR5380: Reduce overrides[] from array to struct
  scsi: g_NCR5380: Remove deprecated __setup
  scsi: ufs: Fix error return code in ufshcd_init()
  scsi: ufs: Data Segment only needed for WRITE DESCRIPTOR
  scsi: cxgb4i: Set completion bit in work request
  MAINTAINERS: Update open-iscsi maintainers
  scsi: ufs: Enable no vccq quirk for skhynix device
  scsi: be2iscsi: mark symbols static where possible

This easy-to-trigger warning shows up instantly when running
Trinity on a kernel with CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS disabled.

At most this should have been a printk, but the -EINVAL alone should be more
than adequate indicator that something isn't available.
Signed-off-by: NDave Jones <davej@codemonkey.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull metag architecture fix from James Hogan:
 "A simple build fix for irqsoff atomics which has started hitting
  meta1_defconfig during the 4.9 merge window"

* tag 'metag-for-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag: Only define atomic_dec_if_positive conditionally

Pull more powerpc updates from Michael Ellerman:
 "Some more powerpc updates for 4.9:

  Freescale updates from Scott Wood:
   - qbman support (a prerequisite for datapath drivers such as ethernet)
   - a PCI DMA fix+improvement
   - reset handler changes
   - more 8xx optimizations
   - some cleanups and fixes.'

  Fixes:
   - selftests/powerpc: Add missing binaries to .gitignores (Michael Ellerman)
   - selftests/powerpc: Fix build break caused by EXPORT_SYMBOL changes (Michael Ellerman)
   - powerpc/pseries: Fix stack corruption in htpe code (Laurent Dufour)
   - powerpc/64s: Fix power4_fixup_nap placement (Nicholas Piggin)
   - powerpc/64: Fix incorrect return value from __copy_tofrom_user (Paul Mackerras)
   - powerpc/mm/hash64: Fix might_have_hea() check (Michael Ellerman)

  Other:
   - MAINTAINERS: Remove myself from PA Semi entries (Olof Johansson)
   - MAINTAINERS: Drop separate pseries entry (Michael Ellerman)
   - MAINTAINERS: Update powerpc website & add selftests (Michael Ellerman):

* tag 'powerpc-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (35 commits)
  powerpc/mm/hash64: Fix might_have_hea() check
  powerpc/64: Fix incorrect return value from __copy_tofrom_user
  powerpc/64s: Fix power4_fixup_nap placement
  powerpc/pseries: Fix stack corruption in htpe code
  selftests/powerpc: Fix build break caused by EXPORT_SYMBOL changes
  MAINTAINERS: Update powerpc website & add selftests
  MAINTAINERS: Drop separate pseries entry
  MAINTAINERS: Remove myself from PA Semi entries
  selftests/powerpc: Add missing binaries to .gitignores
  arch/powerpc: Add CONFIG_FSL_DPAA to corenetXX_smp_defconfig
  soc/qman: Add self-test for QMan driver
  soc/bman: Add self-test for BMan driver
  soc/fsl: Introduce DPAA 1.x QMan device driver
  soc/fsl: Introduce DPAA 1.x BMan device driver
  powerpc/8xx: make user addr DTLB miss the short path
  powerpc/8xx: Move additional DTLBMiss handlers out of exception area
  powerpc/8xx: use r3 to scratch CR in ITLBmiss
  soc/fsl/qe: fix gpio save_regs functions
  powerpc/8xx: add dedicated machine check handler
  powerpc/8xx: add system_reset_exception
  ...

Signed-off-by: NMarcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14380/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Fix various build warnings in tlan/qed/xen-netback drivers, from
    Arnd Bergmann.

 2) Propagate proper error code in strparser's strp_recv(), from Geert
    Uytterhoeven.

 3) Fix accidental broadcast of RTM_GETTFILTER responses, from Eric
    Dumazret.

 4) Need to use list_for_each_entry_safe() in qed driver, from Wei
    Yongjun.

 5) Openvswitch 802.1AD bug fixes from Jiri Benc.

 6) Cure BUILD_BUG_ON() in mlx5 driver, from Tom Herbert.

 7) Fix UDP ipv6 checksumming in netvsc driver, from Stephen Hemminger.

 8) stmmac driver fixes from Giuseppe CAVALLARO.

 9) Fix access to mangled IP6CB in tcp, from Eric Dumazet.

10) Fix info leaks in tipc and rtnetlink, from Dan Carpenter.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
  net: bridge: add the multicast_flood flag attribute to brport_attrs
  net: axienet: Remove unused parameter from __axienet_device_reset
  liquidio: CN23XX: fix a loop timeout
  net: rtnl: info leak in rtnl_fill_vfinfo()
  tipc: info leak in __tipc_nl_add_udp_addr()
  net: ipv4: Do not drop to make_route if oif is l3mdev
  net: phy: Trigger state machine on state change and not polling.
  ipv6: tcp: restore IP6CB for pktoptions skbs
  netvsc: Remove mistaken udp.h inclusion.
  xen-netback: fix type mismatch warning
  stmmac: fix error check when init ptp
  stmmac: fix ptp init for gmac4
  qed: fix old-style function definition
  netvsc: fix checksum on UDP IPV6
  net_sched: reorder pernet ops and act ops registrations
  xen-netback: fix guest Rx stall detection (after guest Rx refactor)
  drivers/ptp: Fix kernel memory disclosure
  net/mlx5: Add MLX5_ARRAY_SET64 to fix BUILD_BUG_ON
  qmi_wwan: add support for Quectel EC21 and EC25
  openvswitch: add NETIF_F_HW_VLAN_STAG_TX to internal dev
  ...

Pull NFS client updates from Anna Schumaker:
 "Highlights include:

  Stable bugfixes:
   - sunrpc: fix writ espace race causing stalls
   - NFS: Fix inode corruption in nfs_prime_dcache()
   - NFSv4: Don't report revoked delegations as valid in nfs_have_delegation()
   - NFSv4: nfs4_copy_delegation_stateid() must fail if the delegation is invalid
   - NFSv4: Open state recovery must account for file permission changes
   - NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic

  Features:
   - Add support for tracking multiple layout types with an ordered list
   - Add support for using multiple backchannel threads on the client
   - Add support for pNFS file layout session trunking
   - Delay xprtrdma use of DMA API (for device driver removal)
   - Add support for xprtrdma remote invalidation
   - Add support for larger xprtrdma inline thresholds
   - Use a scatter/gather list for sending xprtrdma RPC calls
   - Add support for the CB_NOTIFY_LOCK callback
   - Improve hashing sunrpc auth_creds by using both uid and gid

  Bugfixes:
   - Fix xprtrdma use of DMA API
   - Validate filenames before adding to the dcache
   - Fix corruption of xdr->nwords in xdr_copy_to_scratch
   - Fix setting buffer length in xdr_set_next_buffer()
   - Don't deadlock the state manager on the SEQUENCE status flags
   - Various delegation and stateid related fixes
   - Retry operations if an interrupted slot receives EREMOTEIO
   - Make nfs boot time y2038 safe"

* tag 'nfs-for-4.9-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (100 commits)
  NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic
  fs: nfs: Make nfs boot time y2038 safe
  sunrpc: replace generic auth_cred hash with auth-specific function
  sunrpc: add RPCSEC_GSS hash_cred() function
  sunrpc: add auth_unix hash_cred() function
  sunrpc: add generic_auth hash_cred() function
  sunrpc: add hash_cred() function to rpc_authops struct
  Retry operation on EREMOTEIO on an interrupted slot
  pNFS: Fix atime updates on pNFS clients
  sunrpc: queue work on system_power_efficient_wq
  NFSv4.1: Even if the stateid is OK, we may need to recover the open modes
  NFSv4: If recovery failed for a specific open stateid, then don't retry
  NFSv4: Fix retry issues with nfs41_test/free_stateid
  NFSv4: Open state recovery must account for file permission changes
  NFSv4: Mark the lock and open stateids as invalid after freeing them
  NFSv4: Don't test open_stateid unless it is set
  NFSv4: nfs4_do_handle_exception() handle revoke/expiry of a single stateid
  NFS: Always call nfs_inode_find_state_and_recover() when revoking a delegation
  NFSv4: Fix a race when updating an open_stateid
  NFSv4: Fix a race in nfs_inode_reclaim_delegation()
  ...

Pull nfsd updates from Bruce Fields:
 "Some RDMA work and some good bugfixes, and two new features that could
  benefit from user testing:

   - Anna Schumacker contributed a simple NFSv4.2 COPY implementation.
     COPY is already supported on the client side, so a call to
     copy_file_range() on a recent client should now result in a
     server-side copy that doesn't require all the data to make a round
     trip to the client and back.

   - Jeff Layton implemented callbacks to notify clients when contended
     locks become available, which should reduce latency on workloads
     with contended locks"

* tag 'nfsd-4.9' of git://linux-nfs.org/~bfields/linux:
  NFSD: Implement the COPY call
  nfsd: handle EUCLEAN
  nfsd: only WARN once on unmapped errors
  exportfs: be careful to only return expected errors.
  nfsd4: setclientid_confirm with unmatched verifier should fail
  nfsd: randomize SETCLIENTID reply to help distinguish servers
  nfsd: set the MAY_NOTIFY_LOCK flag in OPEN replies
  nfs: add a new NFS4_OPEN_RESULT_MAY_NOTIFY_LOCK constant
  nfsd: add a LRU list for blocked locks
  nfsd: have nfsd4_lock use blocking locks for v4.1+ locks
  nfsd: plumb in a CB_NOTIFY_LOCK operation
  NFSD: fix corruption in notifier registration
  svcrdma: support Remote Invalidation
  svcrdma: Server-side support for rpcrdma_connect_private
  rpcrdma: RDMA/CM private message data structure
  svcrdma: Skip put_page() when send_reply() fails
  svcrdma: Tail iovec leaves an orphaned DMA mapping
  nfsd: fix dprintk in nfsd4_encode_getdeviceinfo
  nfsd: eliminate cb_minorversion field
  nfsd: don't set a FL_LAYOUT lease for flexfiles layouts

Merge tag 'xfs-reflink-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs

    < XFS has gained super CoW powers! >
     ----------------------------------
            \   ^__^
             \  (oo)\_______
                (__)\       )\/\
                    ||----w |
                    ||     ||

Pull XFS support for shared data extents from Dave Chinner:
 "This is the second part of the XFS updates for this merge cycle.  This
  pullreq contains the new shared data extents feature for XFS.

  Given the complexity and size of this change I am expecting - like the
  addition of reverse mapping last cycle - that there will be some
  follow-up bug fixes and cleanups around the -rc3 stage for issues that
  I'm sure will show up once the code hits a wider userbase.

  What it is:

  At the most basic level we are simply adding shared data extents to
  XFS - i.e. a single extent on disk can now have multiple owners. To do
  this we have to add new on-disk features to both track the shared
  extents and the number of times they've been shared. This is done by
  the new "refcount" btree that sits in every allocation group. When we
  share or unshare an extent, this tree gets updated.

  Along with this new tree, the reverse mapping tree needs to be updated
  to track each owner or a shared extent. This also needs to be updated
  ever share/unshare operation. These interactions at extent allocation
  and freeing time have complex ordering and recovery constraints, so
  there's a significant amount of new intent-based transaction code to
  ensure that operations are performed atomically from both the runtime
  and integrity/crash recovery perspectives.

  We also need to break sharing when writes hit a shared extent - this
  is where the new copy-on-write implementation comes in. We allocate
  new storage and copy the original data along with the overwrite data
  into the new location. We only do this for data as we don't share
  metadata at all - each inode has it's own metadata that tracks the
  shared data extents, the extents undergoing CoW and it's own private
  extents.

  Of course, being XFS, nothing is simple - we use delayed allocation
  for CoW similar to how we use it for normal writes. ENOSPC is a
  significant issue here - we build on the reservation code added in
  4.8-rc1 with the reverse mapping feature to ensure we don't get
  spurious ENOSPC issues part way through a CoW operation. These
  mechanisms also help minimise fragmentation due to repeated CoW
  operations. To further reduce fragmentation overhead, we've also
  introduced a CoW extent size hint, which indicates how large a region
  we should allocate when we execute a CoW operation.

  With all this functionality in place, we can hook up .copy_file_range,
  .clone_file_range and .dedupe_file_range and we gain all the
  capabilities of reflink and other vfs provided functionality that
  enable manipulation to shared extents. We also added a fallocate mode
  that explicitly unshares a range of a file, which we implemented as an
  explicit CoW of all the shared extents in a file.

  As such, it's a huge chunk of new functionality with new on-disk
  format features and internal infrastructure. It warns at mount time as
  an experimental feature and that it may eat data (as we do with all
  new on-disk features until they stabilise). We have not released
  userspace suport for it yet - userspace support currently requires
  download from Darrick's xfsprogs repo and build from source, so the
  access to this feature is really developer/tester only at this point.
  Initial userspace support will be released at the same time the kernel
  with this code in it is released.

  The new code causes 5-6 new failures with xfstests - these aren't
  serious functional failures but things the output of tests changing
  slightly due to perturbations in layouts, space usage, etc. OTOH,
  we've added 150+ new tests to xfstests that specifically exercise this
  new functionality so it's got far better test coverage than any
  functionality we've previously added to XFS.

  Darrick has done a pretty amazing job getting us to this stage, and
  special mention also needs to go to Christoph (review, testing,
  improvements and bug fixes) and Brian (caught several intricate bugs
  during review) for the effort they've also put in.

  Summary:

   - unshare range (FALLOC_FL_UNSHARE) support for fallocate

   - copy-on-write extent size hints (FS_XFLAG_COWEXTSIZE) for fsxattr
     interface

   - shared extent support for XFS

   - copy-on-write support for shared extents

   - copy_file_range support

   - clone_file_range support (implements reflink)

   - dedupe_file_range support

   - defrag support for reverse mapping enabled filesystems"

* tag 'xfs-reflink-for-linus-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (71 commits)
  xfs: convert COW blocks to real blocks before unwritten extent conversion
  xfs: rework refcount cow recovery error handling
  xfs: clear reflink flag if setting realtime flag
  xfs: fix error initialization
  xfs: fix label inaccuracies
  xfs: remove isize check from unshare operation
  xfs: reduce stack usage of _reflink_clear_inode_flag
  xfs: check inode reflink flag before calling reflink functions
  xfs: implement swapext for rmap filesystems
  xfs: refactor swapext code
  xfs: various swapext cleanups
  xfs: recognize the reflink feature bit
  xfs: simulate per-AG reservations being critically low
  xfs: don't mix reflink and DAX mode for now
  xfs: check for invalid inode reflink flags
  xfs: set a default CoW extent size of 32 blocks
  xfs: convert unwritten status of reverse mappings for shared files
  xfs: use interval query for rmap alloc operations on shared files
  xfs: add shared rmap map/unmap/convert log item types
  xfs: increase log reservations for reflink
  ...

PCI changes for the v4.9 merge window:
 "Here are some more changes I'd like to have in v4.9.  There's one
  small Tegra bug fix in the PHY poweroff path, which is only used in
  failure paths.

  The rest is all strictly cleanup that should make host bridge drivers
  more readable, but shouldn't actually change any behavior.

  Summary:

   - use local struct device pointers in many host bridge drivers for
     clarity

   - remove unused platform data

   - use generic DesignWare accessors

   - misc cleanups: remove redundant structure entries and re-order
     structure members to put comon generic fields first etc"

* tag 'pci-v4.9-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits)
  MAINTAINERS: Add maintainer for the PCIe Marvell Armada 8K driver
  MAINTAINERS: Add DT binding to the Aardvark PCIe driver maintainer
  PCI: rockchip: Indent "if" statement body
  PCI: hisi: Reorder struct hisi_pcie
  PCI: hisi: Pass device-specific struct to internal functions
  PCI: hisi: Include register block base in PCIE_SYS_STATE4 address
  PCI: dra7xx: Reorder struct dra7xx_pcie
  PCI: xilinx-nwl: Remove unused platform data
  PCI: xilinx-nwl: Add local struct device pointers
  PCI: xilinx: Removed unused xilinx_pcie_assign_msi() argument
  PCI: xilinx: Remove unused platform data
  PCI: xilinx: Add local struct device pointers
  PCI: xgene: Add register accessors
  PCI: xgene: Pass struct xgene_pcie_port to setup functions
  PCI: xgene: Remove unused platform data
  PCI: tegra: Remove unused platform data
  PCI: tegra: Add local struct device pointers
  PCI: tegra: Fix argument order in tegra_pcie_phy_disable()
  PCI: rockchip: Remove unused platform data
  PCI: rcar-gen2: Add local struct device pointers
  ...

Merge tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform drivers updates from Darren Hart:
 "Cleanups, refactoring, and a couple bug fixes.

  intel_pmc_core:
   - avoid boot time warning for !CONFIG_DEBUGFS_FS

  intel_pmc_ipc:
   - Convert to use platform_device_register_full

  asus-wmi:
   - Filter buggy scan codes on ASUS Q500A

  toshiba_bluetooth:
   - Decouple an error checking status code

  toshiba_haps:
   - Change logging level from info to debug
   - Split ACPI and HDD protection error handling

  asus-laptop:
   - get rid of parse_arg()

  asus-wmi:
   - fix asus ux303ub brightness issue

  toshiba_acpi:
   - Fix typo in *_cooling_method_set function
   - Change error checking logic from TCI functions
   - Clean up variable declaration"

* tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  platform/x86: intel_pmc_core: avoid boot time warning for !CONFIG_DEBUGFS_FS
  platform/x86: intel_pmc_ipc: Convert to use platform_device_register_full
  platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A
  platform/x86: toshiba_bluetooth: Decouple an error checking status code
  platform/x86: toshiba_haps: Change logging level from info to debug
  platform/x86: toshiba_haps: Split ACPI and HDD protection error handling
  platform/x86: asus-laptop: get rid of parse_arg()
  platform/x86: asus-wmi: fix asus ux303ub brightness issue
  platform/x86: toshiba_acpi: Fix typo in *_cooling_method_set function
  platform/x86: toshiba_acpi: Change error checking logic from TCI functions
  platform/x86: toshiba_acpi: Clean up variable declaration

Pull watchdog updates from Wim Van Sebroeck:

 - a new watchdog pretimeout governor framework

 - support to upload the firmware on the ziirave_wdt

 - several fixes and cleanups

* git://www.linux-watchdog.org/linux-watchdog: (26 commits)
  watchdog: imx2_wdt: add pretimeout function support
  watchdog: softdog: implement pretimeout support
  watchdog: pretimeout: add pretimeout_available_governors attribute
  watchdog: pretimeout: add option to select a pretimeout governor in runtime
  watchdog: pretimeout: add panic pretimeout governor
  watchdog: pretimeout: add noop pretimeout governor
  watchdog: add watchdog pretimeout governor framework
  watchdog: hpwdt: add support for iLO5
  fs: compat_ioctl: add pretimeout functions for watchdogs
  watchdog: add pretimeout support to the core
  watchdog: imx2_wdt: use preferred BIT macro instead of open coded values
  watchdog: st_wdt: Remove support for obsolete platforms
  watchdog: bindings: Remove obsolete platforms from dt doc.
  watchdog: mt7621_wdt: Remove assignment of dev pointer
  watchdog: rt2880_wdt: Remove assignment of dev pointer
  watchdog: constify watchdog_ops structures
  watchdog: tegra: constify watchdog_ops structures
  watchdog: iTCO_wdt: constify iTCO_wdt_pm structure
  watchdog: cadence_wdt: Fix the suspend resume
  watchdog: txx9wdt: Add missing clock (un)prepare calls for CCF
  ...

When I added the multicast flood control flag, I also added an attribute
for it for sysfs similar to other flags, but I forgot to add it to
brport_attrs.

Fixes: b6cb5ac8 ("net: bridge: add per-port multicast flood flag")
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dev parameter passed to __axienet_device_reset() is not used inside
the function, so remove it.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Reviewed-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is supposed to loop 1000 times and then give up.  The problem is
it's a post-op and after the loop we test if "loop" is zero when really
it would be -1.  Fix this by making it a pre-op.

Fixes: 1b7c55c4 ("liquidio: CN23XX queue manipulation")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The "vf_vlan_info" struct ends with a 2 byte struct hole so we have to
memset it to ensure that no stack information is revealed to user space.

Fixes: 79aab093 ('net: Update API for VF vlan protocol 802.1ad support')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should clear out the padding and unused struct members so that we
don't expose stack information to userspace.

Fixes: fdb3accc ('tipc: add the ability to get UDP options via netlink')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit e0d56fdd was a bit aggressive removing l3mdev calls in
the IPv4 stack. If the fib_lookup fails we do not want to drop to
make_route if the oif is an l3mdev device.

Also reverts 19664c6a ("net: l3mdev: Remove netif_index_is_l3_master")
which removed netif_index_is_l3_master.

Fixes: e0d56fdd ("net: l3mdev: remove redundant calls")
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The phy_start() is used to indicate the PHY is now ready to do its
work. The state is changed, normally to PHY_UP which means that both
the MAC and the PHY are ready.

If the phy driver is using polling, when the next poll happens, the
state machine notices the PHY is now in PHY_UP, and kicks off
auto-negotiation, if needed.

If however, the PHY is using interrupts, there is no polling. The phy
is stuck in PHY_UP until the next interrupt comes along. And there is
no reason for the PHY to interrupt.

Have phy_start() schedule the state machine to run, which both speeds
up the polling use case, and makes the interrupt use case actually
work.

This problems exists whenever there is a state change which will not
cause an interrupt. Trigger the state machine in these cases,
e.g. phy_error().
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Cc: Kyle Roeschley <kyle.roeschley@ni.com>
Tested-by: NKyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Baozeng Ding reported following KASAN splat :

BUG: KASAN: use-after-free in ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 at addr ffff880029c84ec8
Read of size 1 by task poc/25548
Call Trace:
 [<ffffffff82cf43c9>] dump_stack+0x12e/0x185 /lib/dump_stack.c:15
 [<     inline     >] print_address_description /mm/kasan/report.c:204
 [<ffffffff817ced3b>] kasan_report_error+0x48b/0x4b0 /mm/kasan/report.c:283
 [<     inline     >] kasan_report /mm/kasan/report.c:303
 [<ffffffff817ced9e>] __asan_report_load1_noabort+0x3e/0x40 /mm/kasan/report.c:321
 [<ffffffff85c71da1>] ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 /net/ipv6/datagram.c:687
 [<ffffffff85c734c3>] ip6_datagram_recv_ctl+0x33/0x40
 [<ffffffff85c0b07c>] do_ipv6_getsockopt.isra.4+0xaec/0x2150
 [<ffffffff85c0c7f6>] ipv6_getsockopt+0x116/0x230
 [<ffffffff859b5a12>] tcp_getsockopt+0x82/0xd0 /net/ipv4/tcp.c:3035
 [<ffffffff855fb385>] sock_common_getsockopt+0x95/0xd0 /net/core/sock.c:2647
 [<     inline     >] SYSC_getsockopt /net/socket.c:1776
 [<ffffffff855f8ba2>] SyS_getsockopt+0x142/0x230 /net/socket.c:1758
 [<ffffffff8685cdc5>] entry_SYSCALL_64_fastpath+0x23/0xc6
Memory state around the buggy address:
 ffff880029c84d80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff880029c84e00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> ffff880029c84e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                                              ^
 ffff880029c84f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff880029c84f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

He also provided a syzkaller reproducer.

Issue is that ip6_datagram_recv_specific_ctl() expects to find IP6CB
data that was moved at a different place in tcp_v6_rcv()

This patch moves tcp_v6_restore_cb() up and calls it from
tcp_v6_do_rcv() when np->pktoptions is set.

Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NBaozeng Ding <sploving1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon v2 of Stephen's patch.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Wiht the latest rework of the xen-netback driver, we get a warning
on ARM about the types passed into min():

drivers/net/xen-netback/rx.c: In function 'xenvif_rx_next_chunk':
include/linux/kernel.h:739:16: error: comparison of distinct pointer types lacks a cast [-Werror]

The reason is that XEN_PAGE_SIZE is not size_t here. There
is no actual bug, and we can easily avoid the warning using the
min_t() macro instead of min().

Fixes: eb1723a2 ("xen-netback: refactor guest rx")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NPaul Durrant <paul.durrant@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a problem when propagated the
failure of ptp_clock_register to open function.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre TORGUE <alexandre.torgue@st.com>
Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The gmac 4.x version has not extended descriptors
(that are available on 3.x instead of).
While initializing the PTP module, the advanced PTP was
enabled in case of extended descriptors. This cannot be
applied for 4.x version where only the hardware capability
register has to show if the feature is present.
Patch also adds some extra netdev_(debug/inof) to better
dump the configuration.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre TORGUE <alexandre.torgue@st.com>
Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The definition of qed_get_rdma_ops() is not a prototype unless
we add 'void' here, as indicated by this W=1 warning:

drivers/net/ethernet/qlogic/qed/qed_roce.c: In function ‘qed_get_rdma_ops’:
drivers/net/ethernet/qlogic/qed/qed_roce.c:2950:28: error: old-style function definition [-Werror=old-style-definition]

Fixes: abd49676 ("qed: Add RoCE ll2 & GSI support")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NYuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The software calculation of UDP checksum in Netvsc driver was
only handling IPv4 case. By using skb_checksum_help() instead
all protocols can be handled. Rearrange code to eliminate goto
and look like other drivers.

This is a temporary solution; recent versions of Window Server etc
do support UDP checksum offload, just need to do the appropriate negotiation
with host to validate before using. This will be done in later patch.

Please queue this for -stable as well.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Krister reported a kernel NULL pointer dereference after
tcf_action_init_1() invokes a_o->init(), it is a race condition
where one thread calling tcf_register_action() to initialize
the netns data after putting act ops in the global list and
the other thread searching the list and then calling
a_o->init(net, ...).

Fix this by moving the pernet ops registration before making
the action ops visible. This is fine because: a) we don't
rely on act_base in pernet ops->init(), b) in the worst case we
have a fully initialized netns but ops is still not ready so
new actions still can't be created.
Reported-by: NKrister Johansen <kjlx@templeofstupid.com>
Tested-by: NKrister Johansen <kjlx@templeofstupid.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a VIF has been ready for rx_stall_timeout (60s by default) and an
Rx ring is drained of all requests an Rx stall will be incorrectly
detected.  When this occurs and the guest Rx queue is empty, the Rx
ring's event index will not be set and the frontend will not raise an
event when new requests are placed on the ring, permanently stalling
the VIF.

This is a regression introduced by eb1723a2 (xen-netback:
refactor guest rx).

Fix this by reinstating the setting of queue->last_rx_time when
placing a packet onto the guest Rx ring.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Reviewed-by: NPaul Durrant <paul.durrant@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The reserved field precise_offset->rsv is not cleared before being
copied to user space, leaking kernel stack memory. Clear the struct
before it's copied.
Signed-off-by: NVlad Tsyrklevich <vlad@tsyrklevich.net>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I am hitting this in mlx5:

drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c: In function
reclaim_pages_cmd.clone.0:
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:346: error: call
to __compiletime_assert_346 declared with attribute error:
BUILD_BUG_ON failed: __mlx5_bit_off(manage_pages_out, pas[i]) % 64
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c: In function give_pages:
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:291: error: call
to __compiletime_assert_291 declared with attribute error:
BUILD_BUG_ON failed: __mlx5_bit_off(manage_pages_in, pas[i]) % 64

Problem is that this is doing a BUILD_BUG_ON on a non-constant
expression because of trying to take offset of pas[i] in the
structure.

Fix is to create MLX5_ARRAY_SET64 that takes an additional argument
that is the field index to separate between BUILD_BUG_ON on the array
constant field and the indexed field to assign the value to.
There are two callers of MLX5_SET64 that are trying to get a variable
offset, change those to call MLX5_ARRAY_SET64 passing 'pas' and 'i'
as the arguments to use in the offset check and the indexed value
assignment.

Fixes: a533ed5e ("net/mlx5: Pages management commands via mlx5 ifc")
Signed-off-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Quectel EC21 and EC25 need the same "set DTR" request as devices
based on the MDM9230 chipset, but has no USB3 support. Our best guess
is that the "set DTR" functionality depends on chipset and/or
baseband firmware generation. But USB3 is still an optional feature.

Since we cannot enable this unconditionally for all older devices, and
there doesn't appear to be anything we can use in the USB descriptors
to identify these chips, we are forced to use a device specific quirk
flag.
Reported-and-tested-by: NSebastian Sjoholm <sebastian.sjoholm@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Benc says:

====================
openvswitch: vlan fixes

Fix three issues introduced by the 802.1AD patchset.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The internal device does support 802.1AD offloading since 018c1dda
("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink
attributes").
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Acked-by: NEric Garver <e@erig.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the packet has its vlan tag in skb->vlan_tci, the length of the VLAN
header is not counted in skb->len. It doesn't make sense to subtract it.

Fixes: 018c1dda ("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributes")
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Acked-by: NEric Garver <e@erig.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This code is called whenever flow key is being extracted from the packet.
The packet may be as likely vlan tagged as not.

Fixes: 018c1dda ("openvswitch: 802.1AD Flow handling, actions, vlan parsing, netlink attributes")
Signed-off-by: NJiri Benc <jbenc@redhat.com>
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Acked-by: NEric Garver <e@erig.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we will remove items off the list using list_del() we need
to use a safe version of the list_for_each_entry() macro aptly named
list_for_each_entry_safe().
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Acked-by: NYuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While build testing with randconfig on x86, I ran into this warning
that appears to have been around forever

drivers/net/ethernet/ti/tlan.c: In function ‘tlan_probe1’:
drivers/net/ethernet/ti/tlan.c:614:1: error: label ‘err_out’ defined but not used [-Werror=unused-label]

This can be trivially avoided by just moving the label into the
existing #ifdef.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is useful to be able to see the hash configuration when running tests.
This patch adds a debugfs node for that purpose.

The original version of this patch (commit c0c64c15) was reverted due
to build failures caused by a conflict with commit 0364a882
("xen-netback: switch to threaded irq for control ring"). This new version
of the patch is nearly identical to the original, the only difference
being that creation of the debugfs node is predicated on 'ctrl_irq' being
non-zero rather then the now non-existent 'ctrl_task'.
Signed-off-by: NPaul Durrant <paul.durrant@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two ways to get tc filters from kernel to user space.

1) Full dump (tc_dump_tfilter())
2) RTM_GETTFILTER to get one precise filter, reducing overhead.

The second operation is unfortunately broadcasting its result,
polluting "tc monitor" users.

This patch makes sure only the requester gets the result, using
netlink_unicast() instead of rtnetlink_send()

Jamal cooked an iproute2 patch to implement "tc filter get" operation,
but other user space libraries already use RTM_GETTFILTER when a single
filter is queried, instead of dumping all filters.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>