Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 11 1月, 2017 9 次提交
    • D
      mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done} · f931ab47
      由 Dan Williams 提交于 
      Both arch_add_memory() and arch_remove_memory() expect a single threaded
context.

For example, arch/x86/mm/init_64.c::kernel_physical_mapping_init() does
not hold any locks over this check and branch:

    if (pgd_val(*pgd)) {
    	pud = (pud_t *)pgd_page_vaddr(*pgd);
    	paddr_last = phys_pud_init(pud, __pa(vaddr),
    				   __pa(vaddr_end),
    				   page_size_mask);
    	continue;
    }

    pud = alloc_low_page();
    paddr_last = phys_pud_init(pud, __pa(vaddr), __pa(vaddr_end),
    			   page_size_mask);

The result is that two threads calling devm_memremap_pages()
simultaneously can end up colliding on pgd initialization.  This leads
to crash signatures like the following where the loser of the race
initializes the wrong pgd entry:

    BUG: unable to handle kernel paging request at ffff888ebfff0000
    IP: memcpy_erms+0x6/0x10
    PGD 2f8e8fc067 PUD 0 /* <---- Invalid PUD */
    Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
    CPU: 54 PID: 3818 Comm: systemd-udevd Not tainted 4.6.7+ #13
    task: ffff882fac290040 ti: ffff882f887a4000 task.ti: ffff882f887a4000
    RIP: memcpy_erms+0x6/0x10
    [..]
    Call Trace:
      ? pmem_do_bvec+0x205/0x370 [nd_pmem]
      ? blk_queue_enter+0x3a/0x280
      pmem_rw_page+0x38/0x80 [nd_pmem]
      bdev_read_page+0x84/0xb0

Hold the standard memory hotplug mutex over calls to
arch_{add,remove}_memory().

Fixes: 41e94a85 ("add devm_memremap_pages")
Link: http://lkml.kernel.org/r/148357647831.9498.12606007370121652979.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f931ab47
    • E
      ocfs2: fix crash caused by stale lvb with fsdlm plugin · e7ee2c08
      由 Eric Ren 提交于 
      The crash happens rather often when we reset some cluster nodes while
nodes contend fiercely to do truncate and append.

The crash backtrace is below:

   dlm: C21CBDA5E0774F4BA5A9D4F317717495: dlm_recover_grant 1 locks on 971 resources
   dlm: C21CBDA5E0774F4BA5A9D4F317717495: dlm_recover 9 generation 5 done: 4 ms
   ocfs2: Begin replay journal (node 318952601, slot 2) on device (253,18)
   ocfs2: End replay journal (node 318952601, slot 2) on device (253,18)
   ocfs2: Beginning quota recovery on device (253,18) for slot 2
   ocfs2: Finishing quota recovery on device (253,18) for slot 2
   (truncate,30154,1):ocfs2_truncate_file:470 ERROR: bug expression: le64_to_cpu(fe->i_size) != i_size_read(inode)
   (truncate,30154,1):ocfs2_truncate_file:470 ERROR: Inode 290321, inode i_size = 732 != di i_size = 937, i_flags = 0x1
   ------------[ cut here ]------------
   kernel BUG at /usr/src/linux/fs/ocfs2/file.c:470!
   invalid opcode: 0000 [#1] SMP
   Modules linked in: ocfs2_stack_user(OEN) ocfs2(OEN) ocfs2_nodemanager ocfs2_stackglue(OEN) quota_tree dlm(OEN) configfs fuse sd_mod    iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi af_packet iscsi_ibft iscsi_boot_sysfs softdog xfs libcrc32c ppdev parport_pc pcspkr parport      joydev virtio_balloon virtio_net i2c_piix4 acpi_cpufreq button processor ext4 crc16 jbd2 mbcache ata_generic cirrus virtio_blk ata_piix               drm_kms_helper ahci syscopyarea libahci sysfillrect sysimgblt fb_sys_fops ttm floppy libata drm virtio_pci virtio_ring uhci_hcd virtio ehci_hcd       usbcore serio_raw usb_common sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4
   Supported: No, Unsupported modules are loaded
   CPU: 1 PID: 30154 Comm: truncate Tainted: G           OE   N  4.4.21-69-default #1
   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20151112_172657-sheep25 04/01/2014
   task: ffff88004ff6d240 ti: ffff880074e68000 task.ti: ffff880074e68000
   RIP: 0010:[<ffffffffa05c8c30>]  [<ffffffffa05c8c30>] ocfs2_truncate_file+0x640/0x6c0 [ocfs2]
   RSP: 0018:ffff880074e6bd50  EFLAGS: 00010282
   RAX: 0000000000000074 RBX: 000000000000029e RCX: 0000000000000000
   RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000246
   RBP: ffff880074e6bda8 R08: 000000003675dc7a R09: ffffffff82013414
   R10: 0000000000034c50 R11: 0000000000000000 R12: ffff88003aab3448
   R13: 00000000000002dc R14: 0000000000046e11 R15: 0000000000000020
   FS:  00007f839f965700(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000
   CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
   CR2: 00007f839f97e000 CR3: 0000000036723000 CR4: 00000000000006e0
   Call Trace:
     ocfs2_setattr+0x698/0xa90 [ocfs2]
     notify_change+0x1ae/0x380
     do_truncate+0x5e/0x90
     do_sys_ftruncate.constprop.11+0x108/0x160
     entry_SYSCALL_64_fastpath+0x12/0x6d
   Code: 24 28 ba d6 01 00 00 48 c7 c6 30 43 62 a0 8b 41 2c 89 44 24 08 48 8b 41 20 48 c7 c1 78 a3 62 a0 48 89 04 24 31 c0 e8 a0 97 f9 ff <0f> 0b 3d 00 fe ff ff 0f 84 ab fd ff ff 83 f8 fc 0f 84 a2 fd ff
   RIP  [<ffffffffa05c8c30>] ocfs2_truncate_file+0x640/0x6c0 [ocfs2]

It's because ocfs2_inode_lock() get us stale LVB in which the i_size is
not equal to the disk i_size.  We mistakenly trust the LVB because the
underlaying fsdlm dlm_lock() doesn't set lkb_sbflags with
DLM_SBF_VALNOTVALID properly for us.  But, why?

The current code tries to downconvert lock without DLM_LKF_VALBLK flag
to tell o2cb don't update RSB's LVB if it's a PR->NULL conversion, even
if the lock resource type needs LVB.  This is not the right way for
fsdlm.

The fsdlm plugin behaves different on DLM_LKF_VALBLK, it depends on
DLM_LKF_VALBLK to decide if we care about the LVB in the LKB.  If
DLM_LKF_VALBLK is not set, fsdlm will skip recovering RSB's LVB from
this lkb and set the right DLM_SBF_VALNOTVALID appropriately when node
failure happens.

The following diagram briefly illustrates how this crash happens:

RSB1 is inode metadata lock resource with LOCK_TYPE_USES_LVB;

The 1st round:

             Node1                                    Node2
RSB1: PR
                                                  RSB1(master): NULL->EX
ocfs2_downconvert_lock(PR->NULL, set_lvb==0)
  ocfs2_dlm_lock(no DLM_LKF_VALBLK)

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

dlm_lock(no DLM_LKF_VALBLK)
  convert_lock(overwrite lkb->lkb_exflags
               with no DLM_LKF_VALBLK)

RSB1: NULL                                        RSB1: EX
                                                  reset Node2
dlm_recover_rsbs()
  recover_lvb()

/* The LVB is not trustable if the node with EX fails and
 * no lock >= PR is left. We should set RSB_VALNOTVALID for RSB1.
 */

 if(!(kb_exflags & DLM_LKF_VALBLK)) /* This means we miss the chance to
           return;                   * to invalid the LVB here.
                                     */

The 2nd round:

         Node 1                                Node2
RSB1(become master from recovery)

ocfs2_setattr()
  ocfs2_inode_lock(NULL->EX)
    /* dlm_lock() return the stale lvb without setting DLM_SBF_VALNOTVALID */
    ocfs2_meta_lvb_is_trustable() return 1 /* so we don't refresh inode from disk */
  ocfs2_truncate_file()
      mlog_bug_on_msg(disk isize != i_size_read(inode))  /* crash! */

The fix is quite straightforward.  We keep to set DLM_LKF_VALBLK flag
for dlm_lock() if the lock resource type needs LVB and the fsdlm plugin
is uesed.

Link: http://lkml.kernel.org/r/1481275846-6604-1-git-send-email-zren@suse.comSigned-off-by: NEric Ren <zren@suse.com>
Reviewed-by: NJoseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e7ee2c08
    • M
      bpf: do not use KMALLOC_SHIFT_MAX · 7984c27c
      由 Michal Hocko 提交于 
      Commit 01b3f521 ("bpf: fix allocation warnings in bpf maps and
integer overflow") has added checks for the maximum allocateable size.
It (ab)used KMALLOC_SHIFT_MAX for that purpose.

While this is not incorrect it is not very clean because we already have
KMALLOC_MAX_SIZE for this very reason so let's change both checks to use
KMALLOC_MAX_SIZE instead.

The original motivation for using KMALLOC_SHIFT_MAX was to work around
an incorrect KMALLOC_MAX_SIZE which could lead to allocation warnings
but it is no longer needed since "slab: make sure that KMALLOC_MAX_SIZE
will fit into MAX_ORDER".

Link: http://lkml.kernel.org/r/20161220130659.16461-3-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7984c27c
    • M
      mm, slab: make sure that KMALLOC_MAX_SIZE will fit into MAX_ORDER · bb1107f7
      由 Michal Hocko 提交于 
      Andrey Konovalov has reported the following warning triggered by the
syzkaller fuzzer.

  WARNING: CPU: 1 PID: 9935 at mm/page_alloc.c:3511 __alloc_pages_nodemask+0x159c/0x1e20
  Kernel panic - not syncing: panic_on_warn set ...
  CPU: 1 PID: 9935 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #34
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
    __alloc_pages_slowpath mm/page_alloc.c:3511
    __alloc_pages_nodemask+0x159c/0x1e20 mm/page_alloc.c:3781
    alloc_pages_current+0x1c7/0x6b0 mm/mempolicy.c:2072
    alloc_pages include/linux/gfp.h:469
    kmalloc_order+0x1f/0x70 mm/slab_common.c:1015
    kmalloc_order_trace+0x1f/0x160 mm/slab_common.c:1026
    kmalloc_large include/linux/slab.h:422
    __kmalloc+0x210/0x2d0 mm/slub.c:3723
    kmalloc include/linux/slab.h:495
    ep_write_iter+0x167/0xb50 drivers/usb/gadget/legacy/inode.c:664
    new_sync_write fs/read_write.c:499
    __vfs_write+0x483/0x760 fs/read_write.c:512
    vfs_write+0x170/0x4e0 fs/read_write.c:560
    SYSC_write fs/read_write.c:607
    SyS_write+0xfb/0x230 fs/read_write.c:599
    entry_SYSCALL_64_fastpath+0x1f/0xc2

The issue is caused by a lack of size check for the request size in
ep_write_iter which should be fixed.  It, however, points to another
problem, that SLUB defines KMALLOC_MAX_SIZE too large because the its
KMALLOC_SHIFT_MAX is (MAX_ORDER + PAGE_SHIFT) which means that the
resulting page allocator request might be MAX_ORDER which is too large
(see __alloc_pages_slowpath).

The same applies to the SLOB allocator which allows even larger sizes.
Make sure that they are capped properly and never request more than
MAX_ORDER order.

Link: http://lkml.kernel.org/r/20161220130659.16461-2-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bb1107f7
    • R
      dax: wrprotect pmd_t in dax_mapping_entry_mkclean · f729c8c9
      由 Ross Zwisler 提交于 
      Currently dax_mapping_entry_mkclean() fails to clean and write protect
the pmd_t of a DAX PMD entry during an *sync operation.  This can result
in data loss in the following sequence:

1) mmap write to DAX PMD, dirtying PMD radix tree entry and making the
   pmd_t dirty and writeable
2) fsync, flushing out PMD data and cleaning the radix tree entry. We
   currently fail to mark the pmd_t as clean and write protected.
3) more mmap writes to the PMD.  These don't cause any page faults since
   the pmd_t is dirty and writeable.  The radix tree entry remains clean.
4) fsync, which fails to flush the dirty PMD data because the radix tree
   entry was clean.
5) crash - dirty data that should have been fsync'd as part of 4) could
   still have been in the processor cache, and is lost.

Fix this by marking the pmd_t clean and write protected in
dax_mapping_entry_mkclean(), which is called as part of the fsync
operation 2).  This will cause the writes in step 3) above to generate
page faults where we'll re-dirty the PMD radix tree entry, resulting in
flushes in the fsync that happens in step 4).

Fixes: 4b4bb46d ("dax: clear dirty entry tags on cache flush")
Link: http://lkml.kernel.org/r/1482272586-21177-3-git-send-email-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f729c8c9
    • R
      mm: add follow_pte_pmd() · 09796395
      由 Ross Zwisler 提交于 
      Patch series "Write protect DAX PMDs in *sync path".

Currently dax_mapping_entry_mkclean() fails to clean and write protect
the pmd_t of a DAX PMD entry during an *sync operation.  This can result
in data loss, as detailed in patch 2.

This series is based on Dan's "libnvdimm-pending" branch, which is the
current home for Jan's "dax: Page invalidation fixes" series.  You can
find a working tree here:

  https://git.kernel.org/cgit/linux/kernel/git/zwisler/linux.git/log/?h=dax_pmd_clean

This patch (of 2):

Similar to follow_pte(), follow_pte_pmd() allows either a PTE leaf or a
huge page PMD leaf to be found and returned.

Link: http://lkml.kernel.org/r/1482272586-21177-2-git-send-email-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: NDave Hansen <dave.hansen@intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      09796395
    • A
      mm/thp/pagecache/collapse: free the pte page table on collapse for thp page cache. · d670ffd8
      由 Aneesh Kumar K.V 提交于 
      With THP page cache, when trying to build a huge page from regular pte
pages, we just clear the pmd entry.  We will take another fault and at
that point we will find the huge page in the radix tree, thereby using
the huge page to complete the page fault

The second fault path will allocate the needed pgtable_t page for archs
like ppc64.  So no need to deposit the same in collapse path.
Depositing them in the collapse path resulting in a pgtable_t memory
leak also giving errors like

  BUG: non-zero nr_ptes on freeing mm: 3

Fixes: 953c66c2 ("mm: THP page cache support for ppc64")
Link: http://lkml.kernel.org/r/20161212163428.6780-2-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d670ffd8
    • R
      dax: fix deadlock with DAX 4k holes · 965d004a
      由 Ross Zwisler 提交于 
      Currently in DAX if we have three read faults on the same hole address we
can end up with the following:

Thread 0		Thread 1		Thread 2
--------		--------		--------
dax_iomap_fault
 grab_mapping_entry
  lock_slot
   <locks empty DAX entry>

  			dax_iomap_fault
			 grab_mapping_entry
			  get_unlocked_mapping_entry
			   <sleeps on empty DAX entry>

						dax_iomap_fault
						 grab_mapping_entry
						  get_unlocked_mapping_entry
						   <sleeps on empty DAX entry>
  dax_load_hole
   find_or_create_page
   ...
    page_cache_tree_insert
     dax_wake_mapping_entry_waiter
      <wakes one sleeper>
     __radix_tree_replace
      <swaps empty DAX entry with 4k zero page>

			<wakes>
			get_page
			lock_page
			...
			put_locked_mapping_entry
			unlock_page
			put_page

						<sleeps forever on the DAX
						 wait queue>

The crux of the problem is that once we insert a 4k zero page, all
locking from then on is done in terms of that 4k zero page and any
additional threads sleeping on the empty DAX entry will never be woken.

Fix this by waking all sleepers when we replace the DAX radix tree entry
with a 4k zero page.  This will allow all sleeping threads to
successfully transition from locking based on the DAX empty entry to
locking on the 4k zero page.

With the test case reported by Xiong this happens very regularly in my
test setup, with some runs resulting in 9+ threads in this deadlocked
state.  With this fix I've been able to run that same test dozens of
times in a loop without issue.

Fixes: ac401cc7 ("dax: New fault locking")
Link: http://lkml.kernel.org/r/1483479365-13607-1-git-send-email-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reported-by: NXiong Zhou <xzhou@redhat.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>	[4.7+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      965d004a
    • V
      MAINTAINERS: remove duplicate bug filling description · 5771f6ea
      由 Vlastimil Babka 提交于 
      I have noticed that two different descriptions for B: entries in
MAINTAINERS were merged: commit 68656443 ("MAINTAINERS: Add bug
tracking system location entry type") and 2de2bd95 ("MAINTAINERS:
add "B:" for URI where to file bugs").

This patch keeps the description from 2de2bd95.  There has been a
discussion [1] about whether this more detailed description is useful
and what it exactly implies.  I find it more useful and general, and the
author of 68656443 agreed in the end that either is fine.

[1] https://lkml.org/lkml/2016/12/8/71

Link: http://lkml.kernel.org/r/20161219085158.12114-1-vbabka@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      5771f6ea
  3. 10 1月, 2017 3 次提交
    • L
      Merge tag 'drm-fixes-for-v4.10-rc4' of git://people.freedesktop.org/~airlied/linux · bd5d7428
      由 Linus Torvalds 提交于 
      Pull drm fixes from Dave Airlie:
 "amdgpu, radeon, msm, meson, tilcdc, drm fixes.

  Just back online for a couple of days, gathered up the remaining fixes
  pull requests.

  This contains fixes for a few ARM platforms (msm, tilcdc, meson), and
  one core atomic fix. The AMD pull has some new hardware support
  (Polaris12) in it, but this is pretty limited to just hw enablement
  and shouldn't cause any problems"

* tag 'drm-fixes-for-v4.10-rc4' of git://people.freedesktop.org/~airlied/linux:
  drm/amdgpu: drop verde dpm quirks
  drm/radeon: drop verde dpm quirks
  drm/radeon: update smc firmware selection for SI
  drm/amdgpu: update si kicker smc firmware
  drm/amd/powerplay: extend smu's response timeout time.
  drm/amdgpu: remove static integer for uvd pp state
  drm/amd/amdgpu: add Polaris12 PCI ID
  drm/amdgpu/powerplay: add Polaris12 support
  drm/amd/amdgpu: add Polaris12 support (v3)
  MAINTAINERS: Update mailing list for radeon and amdgpu
  drm/meson: Fix CVBS VDAC disable
  drm/meson: Fix CVBS initialization when HDMI is configured by bootloader
  drm: Clean up planes in atomic commit helper failure path
  drm: tilcdc: simplify the recovery from sync lost error on rev1
  drm/meson: Fix plane atomic check when no crtc for the plane
  drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set
  drm/msm: Put back the vaddr in submit_reloc()
  drm/msm: Ensure that the hardware write pointer is valid
      bd5d7428
    • L
      Merge tag 'gpio-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio · 756a7334
      由 Linus Torvalds 提交于 
      Pull GPIO fixes from Linus Walleij:

 - move freeing of GPIO hogs to after freeing the device to get rid of a
   warning state.

 - a small compile warning fix

* tag 'gpio-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: Move freeing of GPIO hogs before numbing of the device
  gpio: mxs: remove __init annotation
      756a7334
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · c92f5bdc
      由 Linus Torvalds 提交于 
      Pull networking fixes from David Miller:

 1) Fix dumping of nft_quota entries, from Pablo Neira Ayuso.

 2) Fix out of bounds access in nf_tables discovered by KASAN, from
    Florian Westphal.

 3) Fix IRQ enabling in dp83867 driver, from Grygorii Strashko.

 4) Fix unicast filtering in be2net driver, from Ivan Vecera.

 5) tg3_get_stats64() can race with driver close and ethtool
    reconfigurations, fix from Michael Chan.

 6) Fix error handling when pass limit is reached in bpf code gen on
    x86. From Daniel Borkmann.

 7) Don't clobber switch ops and use proper MDIO nested reads and writes
    in bcm_sf2 driver, from Florian Fainelli.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits)
  net: dsa: bcm_sf2: Utilize nested MDIO read/write
  net: dsa: bcm_sf2: Do not clobber b53_switch_ops
  net: stmmac: fix maxmtu assignment to be within valid range
  bpf: change back to orig prog on too many passes
  tg3: Fix race condition in tg3_get_stats64().
  be2net: fix unicast list filling
  be2net: fix accesses to unicast list
  netlabel: add CALIPSO to the list of built-in protocols
  vti6: fix device register to report IFLA_INFO_KIND
  net: phy: dp83867: fix irq generation
  amd-xgbe: Fix IRQ processing when running in single IRQ mode
  sh_eth: R8A7740 supports packet shecksumming
  sh_eth: fix EESIPR values for SH77{34|63}
  r8169: fix the typo in the comment
  nl80211: fix sched scan netlink socket owner destruction
  bridge: netfilter: Fix dropping packets that moving through bridge interface
  netfilter: ipt_CLUSTERIP: check duplicate config when initializing
  netfilter: nft_payload: mangle ckecksum if NFT_PAYLOAD_L4CSUM_PSEUDOHDR is set
  netfilter: nf_tables: fix oob access
  netfilter: nft_queue: use raw_smp_processor_id()
  ...
      c92f5bdc
  5. 09 1月, 2017 14 次提交
  7. 08 1月, 2017 6 次提交
    • M
      tg3: Fix race condition in tg3_get_stats64(). · f5992b72
      由 Michael Chan 提交于 
      The driver's ndo_get_stats64() method is not always called under RTNL.
So it can race with driver close or ethtool reconfigurations.  Fix the
race condition by taking tp->lock spinlock in tg3_free_consistent()
when freeing the tp->hw_stats memory block.  tg3_get_stats64() is
already taking tp->lock.
Reported-by: NWang Yufen <wangyufen@huawei.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f5992b72
    • I
      be2net: fix unicast list filling · 6052cd1a
      由 Ivan Vecera 提交于 
      The adapter->pmac_id[0] item is used for primary MAC address but
this is not true for adapter->uc_list[0] as is assumed in
be_set_uc_list(). There are N UC addresses copied first from net_device
to adapter->uc_list[1..N] and then N UC addresses from
adapter->uc_list[0..N-1] are sent to HW. So the last UC address is never
stored into HW and address 00:00:00:00;00:00 (from uc_list[0]) is used
instead.

Cc: Sathya Perla <sathya.perla@broadcom.com>
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Fixes: b7172414 be2net: replace polling with sleeping in the FW completion path
Signed-off-by: NIvan Vecera <cera@cera.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6052cd1a
    • J
      mm: workingset: fix use-after-free in shadow node shrinker · ea07b862
      由 Johannes Weiner 提交于 
      Several people report seeing warnings about inconsistent radix tree
nodes followed by crashes in the workingset code, which all looked like
use-after-free access from the shadow node shrinker.

Dave Jones managed to reproduce the issue with a debug patch applied,
which confirmed that the radix tree shrinking indeed frees shadow nodes
while they are still linked to the shadow LRU:

  WARNING: CPU: 2 PID: 53 at lib/radix-tree.c:643 delete_node+0x1e4/0x200
  CPU: 2 PID: 53 Comm: kswapd0 Not tainted 4.10.0-rc2-think+ #3
  Call Trace:
     delete_node+0x1e4/0x200
     __radix_tree_delete_node+0xd/0x10
     shadow_lru_isolate+0xe6/0x220
     __list_lru_walk_one.isra.4+0x9b/0x190
     list_lru_walk_one+0x23/0x30
     scan_shadow_nodes+0x2e/0x40
     shrink_slab.part.44+0x23d/0x5d0
     shrink_node+0x22c/0x330
     kswapd+0x392/0x8f0

This is the WARN_ON_ONCE(!list_empty(&node->private_list)) placed in the
inlined radix_tree_shrink().

The problem is with 14b46879 ("mm: workingset: move shadow entry
tracking to radix tree exceptional tracking"), which passes an update
callback into the radix tree to link and unlink shadow leaf nodes when
tree entries change, but forgot to pass the callback when reclaiming a
shadow node.

While the reclaimed shadow node itself is unlinked by the shrinker, its
deletion from the tree can cause the left-most leaf node in the tree to
be shrunk.  If that happens to be a shadow node as well, we don't unlink
it from the LRU as we should.

Consider this tree, where the s are shadow entries:

       root->rnode
            |
       [0       n]
        |       |
     [s    ] [sssss]

Now the shadow node shrinker reclaims the rightmost leaf node through
the shadow node LRU:

       root->rnode
            |
       [0        ]
        |
    [s     ]

Because the parent of the deleted node is the first level below the
root and has only one child in the left-most slot, the intermediate
level is shrunk and the node containing the single shadow is put in
its place:

       root->rnode
            |
       [s        ]

The shrinker again sees a single left-most slot in a first level node
and thus decides to store the shadow in root->rnode directly and free
the node - which is a leaf node on the shadow node LRU.

  root->rnode
       |
       s

Without the update callback, the freed node remains on the shadow LRU,
where it causes later shrinker runs to crash.

Pass the node updater callback into __radix_tree_delete_node() in case
the deletion causes the left-most branch in the tree to collapse too.

Also add warnings when linked nodes are freed right away, rather than
wait for the use-after-free when the list is scanned much later.

Fixes: 14b46879 ("mm: workingset: move shadow entry tracking to radix tree exceptional tracking")
Reported-by: NDave Chinner <david@fromorbit.com>
Reported-by: NHugh Dickins <hughd@google.com>
Reported-by: NAndrea Arcangeli <aarcange@redhat.com>
Reported-and-tested-by: NDave Jones <davej@codemonkey.org.uk>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Leech <cleech@redhat.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ea07b862
    • H
      mm: stop leaking PageTables · b0b9b3df
      由 Hugh Dickins 提交于 
      4.10-rc loadtest (even on x86, and even without THPCache) fails with
"fork: Cannot allocate memory" or some such; and /proc/meminfo shows
PageTables growing.

Commit 953c66c2 ("mm: THP page cache support for ppc64") that got
merged in rc1 removed the freeing of an unused preallocated pagetable
after do_fault_around() has called map_pages().

This is usually a good optimization, so that the followup doesn't have
to reallocate one; but it's not sufficient to shift the freeing into
alloc_set_pte(), since there are failure cases (most commonly
VM_FAULT_RETRY) which never reach finish_fault().

Check and free it at the outer level in do_fault(), then we don't need
to worry in alloc_set_pte(), and can restore that to how it was (I
cannot find any reason to pte_free() under lock as it was doing).

And fix a separate pagetable leak, or crash, introduced by the same
change, that could only show up on some ppc64: why does do_set_pmd()'s
failure case attempt to withdraw a pagetable when it never deposited
one, at the same time overwriting (so leaking) the vmf->prealloc_pte?
Residue of an earlier implementation, perhaps? Delete it.

Fixes: 953c66c2 ("mm: THP page cache support for ppc64")
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b0b9b3df
    • L
      Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild · 87bc6107
      由 Linus Torvalds 提交于 
      Pull kbuild fix from Michal Marek:
 "The asm-prototypes.h file added in the last merge window results in
  invalid code with CONFIG_KMEMCHECK=y. The net result is that genksyms
  segfaults.

  This pull request fixes the header, the genksyms fix is in my kbuild
  branch for 4.11"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  asm-prototypes: Clear any CPP defines before declaring the functions
      87bc6107
    • G
      MAINTAINERS: add greybus subsystem mailing list · 01d0f715
      由 Greg Kroah-Hartman 提交于 
      The Greybus driver subsystem has a mailing list, so list it in the
MAINTAINERS file so that people know to send patches there as well.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NJohan Hovold <johan@kernel.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      01d0f715
  9. 07 1月, 2017 8 次提交