Simplify the device management by replacing the lowlevel device object
allocation with the card->private_data.  Nowadays there is almost no
advantage by the lowlevel device, and with card->private_data, the
code becomes cleaner.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Avoid if ((err = ...) style and expand to multiple lines instead.
No change in the end result, but just the beautification.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... so that we can avoid the extra goto lines.
Also beautify the code to follow the standard codex.

No functional changes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The stream direction in open and close callbacks can be retrieved from
substream->direction, hence we don't have to stick with the unique PCM
ops hard-coded for each direction.  Rewrite the common open/close
callback functions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Drop the superfluous #ifndef checks that had been put just for
allowing building the alsa-driver kernel modules externally.
Since the external build was discontinued years ago, let's clean up
the old kludges.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

UAC3 channel map is created during interface parsing,
and in some cases was not freed in failure paths.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

retire_capture_urb() may print warning messages when the given URB
doesn't align, and this may flood the system log easily.
Put the rate limit to the message for avoiding it.

Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1093485Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Obtain the number of channels for the Input Terminal from the
Logical Cluster Descriptor. This achieves a useful minimal parsing
of this unit so it can be used in other units in the topology.
Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Reviewed-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Tested-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This adds support for the UAC3 insertion controls. The status
is reported as a boolean value in the same way it used to do
for UAC2. Hence, the presence of any connector in the response
will make the control saying the jack is connected.

The UAC2 support for this control has been moved to a dedicated
control for connectors as both UAC2 and UAC3 follow a specific
Control Request Parameter Block for this control. This parameter
block for UAC3 could not be read in the same simplistic
manner as in UAC2.

This implementation is not requesting additional information
from the HIGH CAPABILITY Connectors descriptor.

Tested with an UAC3 device with UAC2 as legacy configuration.
The connector status can be read with `amixer` and the interrupt
is also caught with `alsactl monitor`.
Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Reviewed-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Tested-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This adds support for the MIXER UNIT in UAC3. All the information
is obtained from the (HIGH CAPABILITY) Cluster's header. We don't
read the rest of the logical cluster to obtain the channel config
as that wont make any difference in the current mixer behaviour.

The name of the mixer unit is not yet requested as there is not
support for the UAC3 Class Specific String requests.

Tested in an UAC3 device working as a HEADSET with a basic mixer
unit (same as the one in the BADD spec) with no controls.
Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Reviewed-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Tested-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

bmAtributes offset doesn't exist in the UAC3 CS_EP descriptor.
Hence, checking for pitch control as if it was UAC2 doesn't make
any sense. Use the defined UAC3 offsets instead.

Fixes: 9a2fe9b8 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Reviewed-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently it's not possible to set volume lower than 26% (it just mutes).

Also fixes this warning:

  Warning! Unlikely big volume range (=9472), cval->res is probably wrong.
  [13] FU [PCM Playback Volume] ch = 2, val = -9473/-1/1

, and volume works fine for full range.
Signed-off-by: NFederico Cuello <fedux@fedux.com.ar>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Wait for Axe-Fx III to fully bootup before initializing card.
Signed-off-by: NAlberto Aguirre <albaguirre@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Recently released USB Audio Class 3.0 specification
contains BADD (Basic Audio Device Definition) document
which describes pre-defined UAC3 configurations.

BADD support is mandatory for UAC3 devices, it should be
implemented as a separate USB device configuration.
As per BADD document, class-specific descriptors
shall not be included in the Device’s Configuration
descriptor ("inferred"), but host can guess them
from BADD profile number, number of endpoints and
their max packed sizes.

This patch adds support of all BADD profiles from the spec
Signed-off-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Tested-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Functions like snd_usb_copy_string_desc() or
get_term_name() don't actually need mixer_build
state but can use snd_usb_audio structure instead
to get usb device.

This patch has no functional change but prepares
to future UAC3 BADD profiles support which don't
have class-specific descriptors so won't have
mixer_build state.
Signed-off-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The control header needs to be read from buffer at this point only
in the case of UAC1 protocol. Move it inside the switch case as other
protocols such as the Basic Audio Device spec will have an empty buffer
that is latter filled as inferred.
Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk>
[Ruslan: updated with recently added sanity checks]
Signed-off-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Offload snd_usb_parse_audio_interface() function
which became quite long after adding UAC3 spec support.

Move class-specific parts of uac3 parsing to separate
function which now produce audioformat structure that
is ready to be fed to snd_usb_add_audio_stream().
Signed-off-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Offload snd_usb_parse_audio_interface() function
which became quite long after adding UAC3 spec support.

Move class-specific parts of uac1/2 parsing to separate
function which now produce audioformat structure that
is ready to be fed to snd_usb_add_audio_stream().

This also broke Blue Microphones workaround (which
relies on audioformat decoded from previous altsetting)
into two parts: prepare quirk flag analyzing previous
altsetting then use it with current altsetting.
Signed-off-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Offload snd_usb_parse_audio_interface() function which
became quite long after adding UAC3 spec support.

Move audioformat allocation and initialization
into separate function, this will make easier
future refactoring.
Attributes left in the original func because it'll
be used for UAC3 BADD profiles suport in the future

There is no functional change.
Signed-off-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Introduce a new macro for iterating over mixer element list for
avoiding the open codes in many places.  Also the open-coded
container_of() and the forced cast to struct usb_mixer_elem_info are
replaced with another simple macro, too.

No functional changes but just readability improvement.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Dell WD15 Dock with 0bda:4014 doesn't give any useful strings for the
vendor and the product names.  Name them more specifically via quirk,
as well as the UCM profile name.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Historically USB-audio driver sets the card's longname field with the
details of the device and the bus information.  It's good per se, but
not preferable when it's referred as the identifier for UCM profile.

This patch adds a quirk profile_name field to override the card's
longname string to a pre-defined one, so that one can create a unique
and consistent ID string for the specific USB device via a quirk table
to be used as a UCM profile name.

The patch does a slight code refactoring to split out the functions to
set shortname and longname fields as well.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds "Keep Interface" control for each USB-audio device.
The control element is with SND_CTL_IFACE_CARD, so that it won't
appear on any sane mixer applications.  For a device that is confirmed
to work well with "keep-interface" mode, user can flip the control via
amixer, e.g.
  % amixer -c1 cset iface=CARD,name='Keep Interface' on

and save/restore the state via alsactl.

The reason to provide this via control API is that the behavior must
be pretty depending on the device (and the firmware in it), so it's
not ideal to apply via module option.

For a device that certainly works, we may set it statically via a
quirk table entry.  But a device like Dell WD15 dock behaves so
differently depending on the firmware, and we can't set it
statically.  So leave this as a dynamic switch each user can adjust
freely.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Introduce a new flag to struct snd_usb_audio for allowing the device
to skip usb_set_interface() calls at changing or closing the stream.
As of this patch, the flag is nowhere set, so it's just a place
holder.  The dynamic switching will be added in the following patch.

A background information for this change:

Dell WD15 dock with Realtek chip gives a very long pause at each time
the driver changes the altset, which eventually happens at every PCM
stream open/close and parameter change.  As the long pause happens in
each usb_set_interface() call, there is nothing we can do as long as
it's called.  The workaround is to reduce calling it as much as
possible, and this flag indicates that behavior.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is a preliminary change for the upcoming quirk implementation.

Currently USB-audio driver tries to call usb_set_interface() whenever
the format change with interface/altset modification happens.  In this
patch, the check is replaced with the comparison of cur_altsetting and
the targeted altsetting pointer, so that the driver may skip the
unnecessary function calls.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the early commit adcdd0d5 ("ALSA: usb-audio: Skip volume
controls triggers hangup on Dell USB Dock"), we add the mixer quirks
for Dell dock to skip two mixer FU's for playback.  This supposed that
the device has always the proper initial volume, but it doesn't seem
always correct.

This patch adds the explicit initialization of the volumes to the
fixed 0dB at the device probe time.  Also, such a fixup is needed
after the resume, so a new function is hooked to the resume callback
as well.

Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=1089467Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.

Commit 1c8f4220 ("mm: change return type to vm_fault_t")
Signed-off-by: NSouptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: NMatthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The channel mapping is defined by bChRelationship, not bChPurpose.

Fixes: 9a2fe9b8 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Reviewed-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: NMichael Drake <michael.drake@codethink.co.uk>
Signed-off-by: NJorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Dell Dock USB-audio device with 0bda:4014 is behaving notoriously
bad, and we have already applied some workaround to avoid the firmware
hiccup.  Yet we still need to skip one thing, the Extension Unit at ID
4, which doesn't react correctly to the mixer ctl access.

Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1090658
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The UAC2 jack detection support introduced the bmControls checks in a
couple of places, but they forgot the endian conversion; the
bmControls of UAC2 terminal descriptor is __le16, not a byte like in
UAC1.

Fixes: 5a222e84 ("ALSA: usb-audio: UAC2 jack detection")
Tested-by: NAndrew Chant <achant@google.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recent code refactoring made the argument for some helper
functions to be the explicit UAC_CS_* and UAC2_CS_* value instead of
0-based offset.  However, there was one place left forgotten, and it
caused a regression on some devices appearing as the inconsistent
mixer setup.

This patch corrects the forgotten conversion.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199449
Fixes: 21e9b3e9 ("ALSA: usb-audio: fix uac control query argument")
Tested-by: NNazar Mokrynskyi <nazar@mokrynskyi.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Based on a downstream patch from Harry ten Berge.
Signed-off-by: NDaniel Mack <daniel@zonque.org>
Reported-and-tested-by: wenyi@tianyu-wool.com
Original-by: NHarry ten Berge <htenberge@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Axe-Fx III implicit feedback end point and the data sink endpoint
are in different interface descriptors. Add quirk to ensure a sync
endpoint is properly configured.
Signed-off-by: NAlberto Aguirre <albaguirre@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NAlberto Aguirre <albaguirre@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Sending MIDI messages to a PODxt through the USB connection shows
"usb_submit_urb failed" in dmesg and the message is not received by
the POD.

The error is caused because in the funcion send_midi_async() in midi.c
there is a call to usb_sndbulkpipe() for endpoint 3 OUT, but the PODxt
USB descriptor shows that this endpoint it's an interrupt endpoint.

Patch tested with PODxt only.

[ The bug has been present from the very beginning in the staging
  driver time, but Fixes below points to the commit moving to sound/
  directory so that the fix can be cleanly applied -- tiwai ]

Fixes: 61864d84 ("ALSA: move line6 usb driver into sound/usb")
Signed-off-by: NFabián Inostroza <fabianinostroza@udec.cl>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The UAC3 clock parser codes lack of the sanity checks for malformed
descriptors like UAC2 parser does.  Without it, the driver may lead to
a potential crash.

Fixes: 9a2fe9b8 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Tested-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Reviewed-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The sanity checks introduced for malformed descriptors loosely check
the given descriptor size, although the size greater than the defined
description is invalid.  It was due to a concern of any funky firmware
in the actual products.  But this doesn't look hitting, and any sane
products must have the defined descriptors.

So in this patch, we make the validators more strict, allowing only
with the defined descriptor sizes.  The value in clock selector
validator is corrected from 5 to 7 to count the two unlisted fields
after baCSourceID[].
Suggested-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Reviewed-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There are lots of open-coded functions to find a clock source,
selector and multiplier.  Now there are both v2 and v3, so six
variants.

This patch refactors the code to use a common helper for the main
loop, and define each validator function for each target.
There is no functional change.

Fixes: 9a2fe9b8 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Reviewed-by: NRuslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We recently made "format" a u64 variable so now static checkers complain
that this shift will wrap around if format is more than 31.  I don't
think it makes a difference for runtime, but it's simple to silence the
warning.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

With the current exit return path of the ctl_info allocation failure
cval is not being freed resulting in a memory leak. Fix this by kfree'ing
it on the return.

Detected by CoverityScan, CID#1466878 ("Resource Leak")

Fixes: 21e9b3e9 ("ALSA: usb-audio: fix uac control query argument")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>