Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The config symbol for SPE support is called CONFIG_SPU_BASE, not
CONFIG_SPE_BASE.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

__free_page() wants a struct page, not a virtual address.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  sdhci: make sure to clear the error interrupt
  mmc: at91_mci: wakeup on card insertion (or removal)
  mmc: add maintainer for at91

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: fix section mismatch warning in mdesc.c
  [SPARC64]: fix section mismatch warning in pci_sunv4
  [SPARC64]: Stop using drivers/char/rtc.c
  [SPARC64]: Convert parport to of_platform_driver.
  [SPARC]: Implement fb_is_primary_device().
  [SPARC64]: Fix virq decomposition.
  [SPARC64]: Use KERN_ERR in IRQ manipulation error printks.
  [SPARC64]: Do not flood log with failed DS messages.
  [SPARC64]: Add proper multicast support to VNET driver.
  [SPARC64]: Handle multiple domain-services-port nodes properly.
  [SPARC64]: Improve VIO device naming further.
  [SPARC]: Make sure dev_archdata is filled in for all devices.
  [SPARC]: Define minimal struct dev_archdata, similarly to sparc64.
  [SPARC]: Fix serial console device detection.

Fix following warning:
WARNING: vmlinux.o(.text+0x35264): Section mismatch: reference to .init.text:__alloc_bootmem (between 'mdesc_bootmem_alloc' and 'mdesc_bootmem_free')

Rename mdesc_mem_ops to *_ops so modpost ignores __init references
and declare mdesc_bootmem_alloc __init since it is only used
during __init context.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warning:
WARNING: vmlinux.o(.text+0x3cf50): Section mismatch: reference to .init.text:page_in_phys_avail (between 'pci_sun4v_pbm_init' and 'sun4v_pci_init')

pci_sun4v_pbm_init and sun4v_pci_init was only used under __init
context so declare them _init.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The existing sparc64 mini_rtc driver can handle CMOS based
rtcs trivially with just a few lines of code and the simplifies
things tremendously.

Tested on SB1500.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dev_handle and dev_ino fields don't match up exactly to
the traditional IMAP_IGN and IMAP_INO masks.

So store them away in a table and look them up directly.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When booting up a control node it's quite common to
not be able to register several service types.

And likewise on guests at least one or two are going
to not be there.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The best scheme to get uniqueness seems to be:

FOO			-- If node lacks "id" property
FOO-$(ID)		-- If node has "id" but parent lacks "cfg-handle"
FOO-$(ID)-$(CFG_HANDLE) -- If node has both
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current scheme works on static interpretation of text names, which
is wrong.

The output-device setting, for example, must be resolved via an alias
or similar to a full path name to the console device.

Paths also contain an optional set of 'options', which starts with a
colon at the end of the path.  The option area is used to specify
which of two serial ports ('a' or 'b') the path refers to when a
device node drives multiple ports.  'a' is assumed if the option
specification is missing.

This was caught by the UltraSPARC-T1 simulator.  The 'output-device'
property was set to 'ttya' and we didn't pick upon the fact that this
is an OBP alias set to '/virtual-devices/console'.  Instead we saw it
as the first serial console device, instead of the hypervisor console.

The infrastructure is now there to take advantage of this to resolve
the console correctly even in multi-head situations in fbcon too.

Thanks to Greg Onufer for the bug report.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (5880): wm8775/wm8739: Fix memory leak when unloading module
  V4L/DVB (5877): radio-gemtek-pci: remove unused structure member
  V4L/DVB (5871): Conexant 2388x: check for kthread_run
  V4L/DVB (5869): Add check for valid control ID to v4l2_ctrl_next.
  V4L/DVB (5867): videodev2.h: add missing <sys/time.h> for userspace
  V4L/DVB (5866): ivtv: fix DMA timeout when capturing VBI + another stream
  V4L/DVB (5865): Remove usage of HZ on ivtv driver, replacing by msecs_to_jiffies
  V4L/DVB (5861): Use msecs_to_jiffies instead of HZ on bttv, cx88 and saa7134
  V4L/DVB (5860): Use msecs_to_jiffies instead of HZ on some webcam drivers
  V4L/DVB (5859): use msecs_to_jiffies on InfraRed RC5 timeout
  V4L/DVB (5858): Use msecs_to_jiffies instead of HZ on media/video I2C drivers
  V4L/DVB (5857): Use msecs_to_jiffies instead of HZ on radio drivers
  V4L/DVB (5855): ivtv: fix Kconfig typo and refer to the driver homepage.
  V4L/DVB (5854): ivtv: cleanup of driver messages
  V4L/DVB (5853): ivtv: add support to suppress high volume i2c debug messages.
  V4L/DVB (5852): ivtv: don't recompile needlessly
  V4L/DVB (5851): ivtv: fix missing I2C_ALGOBIT config option
  V4L/DVB (5850): ivtv: improve API command debugging
  V4L/DVB (5848): Av7110: fix typo

We ignore all the generated files called "vmlinux*" from the top-level
gitignore, but that also ends up catching a few files that we track, and
that people do edit.  Notably the "vmlinux.lds.S" file, that each
architecture has.

You can always use "git add -f" to override the ignore file, but we
might as well just make it explicit for this file.
Bitten-by-and-tested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-2.6.23' of master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6: (37 commits)
  [CELL] spufs: rework list management and associated locking
  [CELL] oprofile: add support to OProfile for profiling CELL BE SPUs
  [CELL] oprofile: enable SPU switch notification to detect currently active SPU tasks
  [CELL] spu_base: locking cleanup
  [CELL] cell: indexing of SPUs based on firmware vicinity properties
  [CELL] spufs: integration of SPE affinity with the scheduller
  [CELL] cell: add placement computation for scheduling of affinity contexts
  [CELL] spufs: extension of spu_create to support affinity definition
  [CELL] cell: add hardcoded spu vicinity information for QS20
  [CELL] cell: add vicinity information on spus
  [CELL] cell: add per BE structure with info about its SPUs
  [CELL] spufs: use find_first_bit() instead of sched_find_first_bit()
  [CELL] spufs: remove unused file argument from spufs_run_spu()
  [CELL] spufs: change decrementer restore timing
  [CELL] spufs: dont halt decrementer at restore step 47
  [CELL] spufs: limit saving MFC_CNTL bits
  [CELL] spufs: fix read and write for decr_status file
  [CELL] spufs: fix decr_status meanings
  [CELL] spufs: remove needless context save/restore code
  [CELL] spufs: fix array size of channel index
  ...

State struct was never freed.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The drivers reads the PCI subsystem ID into its state structure, but it's
never used anywhere.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The patch adds checking of kthread_run return code and issues a message
if it fails.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

If v4l2_ctrl_next is called without the V4L2_CTRL_FLAG_NEXT_CTRL then it 
should check whether the passed control ID is valid and return 0 if it 
isn't. Otherwise a for-loop over the control IDs will never end.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

When videodev2.h is included by an application, it needs to include
<sys/time.h> for the timeval struct.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The VBI DMA is handled in a special way and is marked with a bit.
However, that bit was set at the wrong time and could be cleared
by mistake if a PCM (or other) DMA request would arrive before the
VBI DMA was completed. So on completion of the VBI DMA the driver
no longer knew that that DMA transfer was for VBI data. And this
in turn caused havoc with the card's DMA engine.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Driver prints banner including kernel version. Was a leftover from when 
the driver was standalone.
Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

I2C_ALGOBIT must also be selected when ivtv is selected.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Turn off debugging of API commands that occur during encoding or decoding,
unless they are explicitly requested.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>