Improved handling for scalling PSP FW binaries
Signed-off-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It won't need to clear the xxx_PSP_DEBUG registers, because firmware
will handle this change.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On platforms that support multiple backlights, register
each one separately.  This lets us manage them independently
rather than registering a single backlight and applying the
same settings to both.

v2: fix typo:
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We've gotten a number of reports about backlight control not
working on panels which indicate that they use aux backlight
control.  A recent patch:

commit 2d73eabe
Author: Camille Cho <Camille.Cho@amd.com>
Date:   Thu Jul 8 18:28:37 2021 +0800

    drm/amd/display: Only set default brightness for OLED

    [Why]
    We used to unconditionally set backlight path as AUX for panels capable
    of backlight adjustment via DPCD in set default brightness.

    [How]
    This should be limited to OLED panel only since we control backlight via
    PWM path for SDR mode in LCD HDR panel.
Reviewed-by: NKrunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NCamille Cho <Camille.Cho@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Changes some other code to only use aux for backlight control on
OLED panels.  The commit message seems to indicate that PWM should
be used for SDR mode on HDR panels.  Do something similar for
backlight control in general.  This may need to be revisited if and
when HDR started to get used.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715Reviewed-by: NRoman Li <Roman.Li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Properly restore those committed and non-committed user customized OD
settings.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The customized OD settings can be divided into two parts: those
committed ones and non-committed ones.
  - For those changes which had been fed to SMU before S3/S4/Runpm
    suspend kicked, they are committed changes. They should be properly
    restored and fed to SMU on S3/S4/Runpm resume.
  - For those non-committed changes, they are restored only without feeding
    to SMU.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 4bba567c.

Revert reason: The issue has been resolved.
Signed-off-by: NEric Huang <jinhuieric.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 4e7b93ca.

Revert reason: The issue has been resolved.
Signed-off-by: NEric Huang <jinhuieric.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 7ed9876c.

Revert reason: The issue has been resolved.
Signed-off-by: NEric Huang <jinhuieric.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 024d8811.

Revert reason: The issue has been resolved.
Signed-off-by: NEric Huang <jinhuieric.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 430f8e6e.

Revert reason: Issue has been resolved.
Signed-off-by: NEric Huang <jinhuieric.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along following fixed:
  - Guard DST_Y_PREFETCH register overflow in DCN21
  - Add missing DCN21 IP parameter
  - Fix PSR command version
  - Add ETW logging for AUX failures
  - Add ETW log to dmub_psr_get_state
  - Fixed EdidUtility build errors
  - Fix missing reg offset for the dmcub test debug registers
  - Adding update authentication interface
  - Remove unused functions of opm state query support
  - Always wait for update lock status
  - Refactor riommu invalidation wa
  - Ensure dentist display clock update finished in DCN20
Reviewed-by: NHsieh Mike <Mike.Hsieh@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NCyr Aric <aric.cyr@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist
display clockis updated to target value. In some scenarios with large
display clock margin, it will deliver unfinished display clock and cause
issues like display black screen.

[How]
Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock
has been update to target value before driver do other clock related
actions.
Reviewed-by: NCyr Aric <aric.cyr@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NDale Zhao <dale.zhao@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
A cleaner solution, only done once on boot.

[How]
Remove previous workaround and configure an extra
vmid one time on boot
Reviewed-by: NKazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove code that would skip wait for lock status for Diags
FPGA case
Reviewed-by: NLaktyushkin Dmytro <dmytro.laktyushkin@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
It has been decided that opm state query support will be dropped.
Therefore link encryption enabled and save current encryption states
won't be used anymore and there are no foreseeable usages in the future.
We will remove these two interfaces for clean up.
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Previously to toggle authentication, we need to remove and
add the same display back with modified adjustment.
This method will toggle DTM state without actual hardware changes.
This is not per design and would cause potential issues in the long run.

[how]
We are creating a dedicated interface that does the same thing as
remove and add back the display without changing DTM state.
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Initializing was missing reg offsets for the dmcub test debug registers
causing assert

[How]
Add initialization
Reviewed-by: NKazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[HOW]
Added #ifdefs and refactored various parts of dc to
allow dc_link to be built by AMD EDID UTILITY

[WHY]
dc_dsc was refactored moving some of the code that AMD EDID UTILITY needed
to dc_link, so now dc_link needs to be included by AMD EDID UTILITY

Squash in DCN config fix (Alex)
Reviewed-by: NLeung Martin <Martin.Leung@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NMark Morra <MarkAlbert.Morra@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
GPINT commands have the lowest priority in DMCUB, so it's possible
that the command isn't processed in time.

[How]
Add a log to help identify this case.
Reviewed-by: NKoo Anthony <Anthony.Koo@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NWyatt Wood <wyatt.wood@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Would like to identify the cause of AUX transactions failing
via ETW logs.

[How]
Add ETW logging for AUX failures.
Reviewed-by: NPavic Josip <Josip.Pavic@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NWyatt Wood <wyatt.wood@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
For dual eDP when setting the new settings we need to set
command version to DMUB_CMD_PSR_CONTROL_VERSION_1, otherwise
DMUB will not read panel_inst parameter.
[how]
Instead of PSR_VERSION_1 pass DMUB_CMD_PSR_CONTROL_VERSION_1
Reviewed-by: NWood Wyatt <Wyatt.Wood@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
IP parameter min_meta_chunk_size_bytes is read for bandwidth
calculations but it was never defined.

[how]
Define min_meta_chunk_size_bytes and initialize value to 256.
Reviewed-by: NLaktyushkin Dmytro <dmytro.laktyushkin@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NVictor Lu <victorchengchi.lu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Rename amdgpu_acpi_is_s0ix_supported to better explain
functionality by renaming to amdgpu_acpi_is_s0ix_active
Signed-off-by: NPratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
DST_Y_PREFETCH can overflow when DestinationLinesForPrefetch values are
too large due to the former being limited to 8 bits.

[how]
Set the maximum value of DestinationLinesForPrefetch to be 255 * refclk
period.
Reviewed-by: NLaktyushkin Dmytro <dmytro.laktyushkin@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NVictor Lu <victorchengchi.lu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
User might change the suspend behaviour from OS.

[How]
Check with pm for target suspend state and set s0ix
flag only for s2idle state.

v2: User might change default suspend state, use target state
v3: squash in build fix
Suggested-by: NLijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: NPratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

They are initalized by hardware during power up phase,
starting from sdma v5_2 generation
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In pass-through mode, after mode 1 reset, msix enablement status would
lost and never receives interrupt again. So, we should restore msix
status after mode 1 reset.
Signed-off-by: NChengzhe Liu <ChengZhe.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The fail reason is that the vfgate is disabled
Signed-off-by: NRoy Sun <Roy.Sun@amd.com>
Reviewed-by: NPeng Ju Zhou <PengJu.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Regression found in some embedded panels traces back to the earliest
upstreamed ASSR patch. The changed code flow are causing problems
with some panels.

[How]
- Change ASSR enabling code while preserving original code flow
  as much as possible
- Simplify the code on guarding with internal display flag

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213779
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1620Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NStylon Wang <stylon.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On Sienna Cichlid, in pass-through mode, if we unload the driver in BACO
mode(RTPM), then the kernel would receive thousands of interrupts.
That's because there is doorbell monitor interrupt on BIF, so KVM keeps
injecting interrupts to the guest VM. So we should clear the doorbell
interrupt status after BACO exit.

v2: Modify coding style and commit message
Signed-off-by: NChengzhe Liu <ChengZhe.Liu@amd.com>
Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This fixes a bug which if we probe a non-existing
I2C device, and the SMU returns 0xFF, from then on
we can never communicate with the SMU, because the
code before this patch reads and interprets 0xFF
as a terminal error, and thus we never write 0
into register 90 to clear the status (and
subsequently send a new command to the SMU.)

It is not an error that the SMU returns status
0xFF. This means that the SMU executed the last
command successfully (execution status), but the
command result is an error of some sort (execution
result), depending on what the command was.

When doing a status check of the SMU, before we
send a new command, the only status which
precludes us from sending a new command is 0--the
SMU hasn't finished executing a previous command,
and 0xFC--the SMU is busy.

This bug was seen as the following line in the
kernel log,

amdgpu: Msg issuing pre-check failed(0xff) and SMU may be not in the right state!

when subsequent SMU commands, not necessarily
related to I2C, were sent to the SMU.

This patch fixes this bug.

v2: Add a comment to the description of
__smu_cmn_poll_stat() to explain why we're NOT
defining the SMU FW return codes as macros, but
are instead hard-coding them. Such a change, can
be followed up by a subsequent patch.

v3: The changes are,
a) Add comments to break labels in
   __smu_cmn_reg2errno().

b) When an unknown/unspecified/undefined result is
   returned back from the SMU, map that to
   -EREMOTEIO, to distinguish failure at the SMU
   FW.

c) Add kernel-doc to
   smu_cmn_send_msg_without_waiting(),
   smu_cmn_wait_for_response(),
   smu_cmn_send_smc_msg_with_param().

d) In smu_cmn_send_smc_msg_with_param(), since we
   wait for completion of the command, if the
   result of the completion is
   undefined/unknown/unspecified, we print that to
   the kernel log.

v4: a) Add macros as requested, though redundant, to
    be removed when SMU consolidates for all
    ASICs--see comment in code.
    b) Get out if the SMU code is unknown.

v5: Rename the macro names.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Fixes: fcb1fe9c ("drm/amd/powerplay: pre-check the SMU state before issuing message")
Signed-off-by: NLuben Tuikov <luben.tuikov@amd.com>
Reviewed-by: NAlex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Asic cyan_skilfish2 won't support RLC autoload when using
front door loading. We just use PSP to load firmware like
gfx9 here.

So add autoload_supported flag check instead of just
checking firmware load type for RLC autoload.
Signed-off-by: NLang Yu <Lang.Yu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable SMU support for cyan_skilfish.

v2: Squash in fix (Alex)
Signed-off-by: NLang Yu <Lang.Yu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add check_fw_version function support for cyan_skillfish.
Signed-off-by: NLang Yu <Lang.Yu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add basic ppt funcs support or cyan_skilfish.
Signed-off-by: NLang Yu <Lang.Yu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add smu11_driver_if_cyan_skillfish.h for cyan_skilfish.
Signed-off-by: NLang Yu <Lang.Yu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add smu_v11_8_ppsmc.h for cyan_skilfish.
Signed-off-by: NLang Yu <Lang.Yu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>