- 02 10月, 2018 4 次提交
-
-
由 Kunihiko Hayashi 提交于
Enable the USB3 and USB2 phys implemented in UniPhier SoCs. These phys are necessary for dwc3 and ehci controllers driving the USB ports on Pro4 and PXs2 SoCs. Since the USB host drivers are already built-in, so only the phy driver are missing to allow booting with USB devices. Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
Merge tag 'sunxi-config64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/defconfig Allwinner arm64 config changes for 4.20 Here is a single config change to enable the DRM driver in the arm64 defconfig. * tag 'sunxi-config64-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: defconfig: Enable CONFIG_DRM_SUN4I Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Kunihiko Hayashi 提交于
Enable the USB3 and USB2 phys implemented in UniPhier SoCs. These phys are necessary for dwc3 and ehci controllers driving the USB ports on arm64 UniPhier SoCs. Since the USB host drivers are already built-in, so only the phy driver are missing to allow booting with USB devices. Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
Merge tag 'qcom-defconfig-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig Qualcomm ARM Based defconfig Updates for v4.20 * Enable MAILBOX * tag 'qcom-defconfig-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: qcom_defconfig: Enable MAILBOX Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 01 10月, 2018 1 次提交
-
-
由 Arnd Bergmann 提交于
Merge tag 'qcom-arm64-defconfig-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/defconfig Qualcomm ARM64 Based defconfig Updates for v4.20 * Enable Qualcomm QRTR driver * tag 'qcom-arm64-defconfig-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: defconfig: Enable Qualcomm QRTR Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 29 9月, 2018 2 次提交
-
-
由 Arnd Bergmann 提交于
Merge tag 'renesas-arm-defconfig-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig Renesas ARM Based SoC Defconfig Updates for v4.20 * shmobile and multi_v7 defconfigs: - Enable recently upstreamed r8a7744 SoC - Enable FDP1 (Fine Display processor) present on R-Car Gen2 and RZ/G1 SoCs * shmobile defconfig (only): - Refresh for v4.19-rc1 - Remove soon to be deprecated SOC_CAMERA * tag 'renesas-arm-defconfig-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: defconfig: Enable r8a7744 SoC ARM: multi_v7_defconfig: Enable r8a7744 SoC ARM: multi_v7_defconfig: Enable VIDEO_RENESAS_FDP1 ARM: shmobile: defconfig: Enable VIDEO_RENESAS_FDP1 ARM: shmobile: defconfig: Refresh shmobile_defconfig for v4.19-rc1 ARM: shmobile: defconfig: Remove SOC_CAMERA Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
Merge tag 'renesas-arm64-defconfig-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig Renesas ARM64 Based SoC Defconfig Updates for v4.20 * Enable recently upstreamed RZ/G2E (r8a774c0) and RZ/G2M (r8a774a1) SoCs * tag 'renesas-arm64-defconfig-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: defconfig: enable R8A774C0 SoC arm64: defconfig: enable R8A774A1 SoC Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 26 9月, 2018 4 次提交
-
-
由 Olof Johansson 提交于
Merge tag 'at91-4.20-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into next/defconfig AT91 defconfig for 4.20 - addition of sama5 I2S - addition of generic ADC resistive touchscreen * tag 'at91-4.20-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: multi_v7_defconfig: add Atmel I2S driver ARM: configs: at91: Add I2S driver to sama5 ARM: multi_v7_defconfig: add generic resistive touchscreen ARM: configs: at91: add generic resistive touchscreen to sama5 Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://github.com/hisilicon/linux-hisi由 Olof Johansson 提交于
ARM64: hisilicon: defconfig updates for 4.20 - Enable integrated NIC driver(hns3) for hisilicon SoCs - Enable PCIe Port bus to support some PCIe features like AER, hotplug, PME and DPC * tag 'hisi-defconfig-for-4.20' of git://github.com/hisilicon/linux-hisi: arm64: defconfig: Enable PCIEPORTBUS arm64: defconfig: enable HiSilicon HNS3 driver Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Olof Johansson 提交于
Merge tag 'stm32-defconfig-for-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/defconfig STM32 defconfig updates for v4.20, round 1 In multi_v7_defconfig, add support of: -STM32 SPI (module) -STM32 DRM and MIPI DSI (modules) -Panels OTM8009A and RM68200 (modules) -Enable backlight gpio * tag 'stm32-defconfig-for-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: multi_v7_defconfig: enable backlight gpio ARM: multi_v7_defconfig: enable panels OTM8009A and RM68200 ARM: multi_v7_defconfig: enable STM32 DRM and MIPI DSI support ARM: multi_v7_defconfig: enable STM32 SPI
-
https://github.com/Broadcom/stblinux由 Olof Johansson 提交于
This pull request contains Broadcom ARM-based SoCs defconfig changes for 4.20, please pull the following: - Stefan updates the bcm2835_defconfig file to turn on the bcm2835-audio driver. * tag 'arm-soc/for-4.20/defconfig' of https://github.com/Broadcom/stblinux: ARM: bcm2835_defconfig: Enable bcm2835-audio Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 21 9月, 2018 6 次提交
-
-
由 Dongdong Liu 提交于
PCIe features like AER, Hotplug, PME, DPC depend on PCIEPORTBUS, so enable PCIEPORTBUS as default. Signed-off-by: NDongdong Liu <liudongdong3@huawei.com> Signed-off-by: NWei Xu <xuwei5@hisilicon.com>
-
由 Zhou Wang 提交于
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com> Signed-off-by: NWei Xu <xuwei5@hisilicon.com>
-
由 Yannick Fertré 提交于
Enable generic GPIO based backlight driver. Signed-off-by: NYannick Fertré <yannick.fertre@st.com> Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>
-
由 Yannick Fertré 提交于
Enable panel OTM8009A and panel raydium RM68200 as loadable modules. Signed-off-by: NYannick Fertré <yannick.fertre@st.com> Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>
-
由 Yannick Fertré 提交于
Enable DRM and MIPI DSI support for STMicroelectronics as loadable module. Signed-off-by: NYannick Fertré <yannick.fertre@st.com> Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>
-
由 Amelie Delaunay 提交于
Enable the STM32 SPI driver, implemented on STM32MP1 SoC. Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com> Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>
-
- 19 9月, 2018 2 次提交
-
-
由 Biju Das 提交于
Enable recently added r8a7744 (RZ/G1N) SoC. Signed-off-by: NBiju Das <biju.das@bp.renesas.com> Reviewed-by: NFabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Biju Das 提交于
Enable recently added r8a7744 (RZ/G1N) SoC. Signed-off-by: NBiju Das <biju.das@bp.renesas.com> Reviewed-by: NFabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 17 9月, 2018 1 次提交
-
-
由 Fabrizio Castro 提交于
Enable the Renesas RZ/G2E (R8A774C0) SoC in the ARM64 defconfig. Signed-off-by: NFabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: NBiju Das <biju.das@bp.renesas.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 14 9月, 2018 2 次提交
-
-
由 Frank Rowand 提交于
Problem: ab460a2e ("rpmsg: qcom_smd: Access APCS through mailbox framework" added a "depends on MAILBOX") to RPMSG_QCOM_SMD, thus RPMSG_QCOM_SMD becomes unset since MAILBOX was not enabled in qcom_defconfig and is not otherwise selected for the dragonboard. When the resulting kernel is booted the mmc device which contains the root file system is not available. Fix: add CONFIG_MAILBOX to qcom_defconfig Fixes: ab460a2e ("rpmsg: qcom_smd: Access APCS through mailbox framework" added a "depends on MAILBOX") Signed-off-by: NFrank Rowand <frank.rowand@sony.com> Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: NAndy Gross <andy.gross@linaro.org>
-
由 Bjorn Andersson 提交于
The QRTR packet family is used for a wide range of communication between services in Qualcomm platforms. Examples of services using this transport for communication are remoteproc management, modem control, positioning, power management and WiFi. Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: NAndy Gross <andy.gross@linaro.org>
-
- 10 9月, 2018 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 09 9月, 2018 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Prevent multiplication result truncation on 32bit. Introduced with the early timestamp reworrk. - Ensure microcode revision storage to be consistent under all circumstances - Prevent write tearing of PTEs - Prevent confusion of user and kernel reegisters when dumping fatal signals verbosely - Make an error return value in a failure path of the vector allocation negative. Returning EINVAL might the caller assume success and causes further wreckage. - A trivial kernel doc warning fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Use WRITE_ONCE() when setting PTEs x86/apic/vector: Make error return value negative x86/process: Don't mix user/kernel regs in 64bit __show_regs() x86/tsc: Prevent result truncation on 32bit x86: Fix kernel-doc atomic.h warnings x86/microcode: Update the new microcode revision unconditionally x86/microcode: Make sure boot_cpu_data.microcode is up-to-date
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timekeeping fixes from Thomas Gleixner: "Two fixes for timekeeping: - Revert to the previous kthread based update, which is unfortunately required due to lock ordering issues. The removal caused boot failures on old Core2 machines. Add a proper comment why the thread needs to stay to prevent accidental removal in the future. - Fix a silly typo in a function declaration" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Revert "Remove kthread" timekeeping: Fix declaration of read_persistent_wall_and_boot_offset()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irqchip fix from Thomas Gleixner: "A single fix to prevent allocating excessive memory in the GIC/ITS driver. While the subject of the patch might suggest otherwise this is a real fix as some SoCs exceed the memory allocation limits and fail to boot" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Cap lpi_id_bits to reduce memory footprint
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull cpu hotplug fixes from Thomas Gleixner: "Two fixes for the hotplug state machine code: - Move the misplaces smb() in the hotplug thread function to the proper place, otherwise a half update control struct could be observed - Prevent state corruption on error rollback, which causes the state to advance by one and as a consequence skip it in the bringup sequence" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Prevent state corruption on error rollback cpu/hotplug: Adjust misplaced smb() in cpuhp_thread_fun()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random由 Linus Torvalds 提交于
Pull random driver fix from Ted Ts'o: "Fix things so the choice of whether or not to trust RDRAND to initialize the CRNG is configurable via the boot option random.trust_cpu={on,off}" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: make CPU trust a boot parameter
-
由 Linus Torvalds 提交于
Merge tag 'kbuild-fixes-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - make setlocalversion more robust about -dirty check - loosen the pkg-config requirement for Kconfig - change missing depmod to a warning from an error - warn modules_install when System.map is missing * tag 'kbuild-fixes-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: modules_install: warn when missing System.map file kbuild: make missing $DEPMOD a Warning instead of an Error kconfig: do not require pkg-config on make {menu,n}config kconfig: remove a spurious self-assignment scripts/setlocalversion: git: Make -dirty check more robust
-
由 Randy Dunlap 提交于
If there is no System.map file for "make modules_install", scripts/depmod.sh will silently exit with success, having done nothing. Since this is an unexpected situation, change it to report a Warning for the missing file. The behavior is not changed except for the Warning message. The (previous) silent success and new Warning can be reproduced by: $ make mrproper; make defconfig $ make modules; make modules_install and since System.map is produced by "make vmlinux", the steps above omit producing the System.map file. Reported-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Radim Krčmář: "ARM: - Fix a VFP corruption in 32-bit guest - Add missing cache invalidation for CoW pages - Two small cleanups s390: - Fallout from the hugetlbfs support: pfmf interpretion and locking - VSIE: fix keywrapping for nested guests PPC: - Fix a bug where pages might not get marked dirty, causing guest memory corruption on migration - Fix a bug causing reads from guest memory to use the wrong guest real address for very large HPT guests (>256G of memory), leading to failures in instruction emulation. x86: - Fix out of bound access from malicious pv ipi hypercalls (introduced in rc1) - Fix delivery of pending interrupts when entering a nested guest, preventing arbitrarily late injection - Sanitize kvm_stat output after destroying a guest - Fix infinite loop when emulating a nested guest page fault and improve the surrounding emulation code - Two minor cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) KVM: LAPIC: Fix pv ipis out-of-bounds access KVM: nVMX: Fix loss of pending IRQ/NMI before entering L2 arm64: KVM: Remove pgd_lock KVM: Remove obsolete kvm_unmap_hva notifier backend arm64: KVM: Only force FPEXC32_EL2.EN if trapping FPSIMD KVM: arm/arm64: Clean dcache to PoC when changing PTE due to CoW KVM: s390: Properly lock mm context allow_gmap_hpage_1m setting KVM: s390: vsie: copy wrapping keys to right place KVM: s390: Fix pfmf and conditional skey emulation tools/kvm_stat: re-animate display of dead guests tools/kvm_stat: indicate dead guests as such tools/kvm_stat: handle guest removals more gracefully tools/kvm_stat: don't reset stats when setting PID filter for debugfs tools/kvm_stat: fix updates for dead guests tools/kvm_stat: fix handling of invalid paths in debugfs provider tools/kvm_stat: fix python3 issues KVM: x86: Unexport x86_emulate_instruction() KVM: x86: Rename emulate_instruction() to kvm_emulate_instruction() KVM: x86: Do not re-{try,execute} after failed emulation in L2 KVM: x86: Default to not allowing emulation retry in kvm_mmu_page_fault ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "A few more fixes who have trickled in: - MMC bus width fixup for some Allwinner platforms - Fix for NULL deref in ti-aemif when no platform data is passed in - Fix div by 0 in SCMI code - Add a missing module alias in a new RPi driver" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: memory: ti-aemif: fix a potential NULL-pointer dereference firmware: arm_scmi: fix divide by zero when sustained_perf_level is zero hwmon: rpi: add module alias to raspberrypi-hwmon arm64: allwinner: dts: h6: fix Pine H64 MMC bus width
-
由 Olof Johansson 提交于
Merge tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Allwinner fixes for 4.19 Just one fix for H6 mmc on the Pine H64: the mmc bus width was missing from the device tree. This was added in 4.19-rc1. * tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: dts: h6: fix Pine H64 MMC bus width Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 08 9月, 2018 7 次提交
-
-
由 Nadav Amit 提交于
When page-table entries are set, the compiler might optimize their assignment by using multiple instructions to set the PTE. This might turn into a security hazard if the user somehow manages to use the interim PTE. L1TF does not make our lives easier, making even an interim non-present PTE a security hazard. Using WRITE_ONCE() to set PTEs and friends should prevent this potential security hazard. I skimmed the differences in the binary with and without this patch. The differences are (obviously) greater when CONFIG_PARAVIRT=n as more code optimizations are possible. For better and worse, the impact on the binary with this patch is pretty small. Skimming the code did not cause anything to jump out as a security hazard, but it seems that at least move_soft_dirty_pte() caused set_pte_at() to use multiple writes. Signed-off-by: NNadav Amit <namit@vmware.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180902181451.80520-1-namit@vmware.com
-
由 Thomas Gleixner 提交于
activate_managed() returns EINVAL instead of -EINVAL in case of error. While this is unlikely to happen, the positive return value would cause further malfunction at the call site. Fixes: 2db1f959 ("x86/vector: Handle managed interrupts proper") Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: - bugfixes for uniphier, i801, and xiic drivers - ID removal (never produced) for imx - one MAINTAINER addition * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: xiic: Record xilinx i2c with Zynq fragment i2c: xiic: Make the start and the byte count write atomic i2c: i801: fix DNV's SMBCTRL register offset i2c: imx-lpi2c: Remove mx8dv compatible entry dt-bindings: imx-lpi2c: Remove mx8dv compatible entry i2c: uniphier-f: issue STOP only for last message or I2C_M_STOP i2c: uniphier: issue STOP only for last message or I2C_M_STOP
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC updates from Vineet Gupta: - Fix for atomic_fetch_#op [Will Deacon] - Enable per device IOC [Eugeniy Paltsev] - Remove redundant gcc version checks [Masahiro Yamada] - Miscll platform config/DT updates [Alexey Brodkin] * tag 'arc-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: don't check for HIGHMEM pages in arch_dma_alloc ARC: IOC: panic if both IOC and ZONE_HIGHMEM enabled ARC: dma [IOC] Enable per device io coherency ARC: dma [IOC]: mark DMA devices connected as dma-coherent ARC: atomics: unbork atomic_fetch_##op() arc: remove redundant GCC version checks ARC: sort Kconfig ARC: cleanup show_faulting_vma() ARC: [plat-axs*]: Enable SWAP ARC: [plat-axs*/plat-hsdk]: Allow U-Boot to pass MAC-address to the kernel ARC: configs: cleanup
-
由 David Howells 提交于
Fix the cell specification mechanism to allow cells to be pre-created without having to specify at least one address (the addresses will be upcalled for). This allows the cell information preload service to avoid the need to issue loads of DNS lookups during boot to get the addresses for each cell (500+ lookups for the 'standard' cell list[*]). The lookups can be done later as each cell is accessed through the filesystem. Also remove the print statement that prints a line every time a new cell is added. [*] There are 144 cells in the list. Each cell is first looked up for an SRV record, and if that fails, for an AFSDB record. These get a list of server names, each of which then has to be looked up to get the addresses for that server. E.g.: dig srv _afs3-vlserver._udp.grand.central.org Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md由 Linus Torvalds 提交于
Pull MD fixes from Shaohua Li: - Fix a locking issue for md-cluster (Guoqing) - Fix a sync crash for raid10 (Ni) - Fix a reshape bug with raid5 cache enabled (me) * tag 'md/4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md-cluster: release RESYNC lock after the last resync message RAID10 BUG_ON in raise_barrier when force is true and conf->barrier is 0 md/raid5-cache: disable reshape completely
-
https://github.com/ceph/ceph-client由 Linus Torvalds 提交于
Pull ceph fixes from Ilya Dryomov: "Two rbd patches to complete support for images within namespaces that went into -rc1 and a use-after-free fix. The rbd changes have been sitting in a branch for quite a while but couldn't be included into the -rc1 pull request because of a pending wire protocol backwards compatibility fixup that only got committed early this week" * tag 'ceph-for-4.19-rc3' of https://github.com/ceph/ceph-client: rbd: support cloning across namespaces rbd: factor out get_parent_info() ceph: avoid a use-after-free in ceph_destroy_options()
-