s3c_adc_battery declares wrong method names when CONFIG_PM is not set.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

The device table is required to load modules based on modaliases.
After adding the MODULE_DEVICE_TABLE, below entry will be added to
modules.alias:
alias i2c:aer915 z2_battery
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

The device table is required to load modules based on modaliases.
After adding the MODULE_DEVICE_TABLE, below entries will be added to
modules.alias:
alias i2c:ds2786 ds2782_battery
alias i2c:ds2782 ds2782_battery
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

The device table is required to load modules based on modaliases.
After adding the MODULE_DEVICE_TABLE, below entry will be added to
modules.alias:
alias i2c:bq20z75 bq20z75
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

Update the power_supply_is_watt_property function to include POWER_NOW.
Signed-off-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

With the support of platform data, now adding support for option i2c
retries on read/write failures. Ths is specified through the optional
platform data.
Signed-off-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

Adding support for an optional gpio for battery detection. This is
passed in through the i2c platform data. It also accepts another
field, battery_detect_present to signify the gpio state which means
the battery is present, either 0 (low) or 1 (high).
Signed-off-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

This queues work from the otg notification where the
i2c operations can be safely made. Needed for atomic otg
notifiers.
Signed-off-by: NHeikki Krogerus <heikki.krogerus@nokia.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

Doing this by using 2 calls sometimes results in unexpected
values being returned on OMAP3 i2c controller.
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>

Some minor stylistic cleanups.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>

* Consistently use uppercase for hexadecimal values.
* Clarify/fix the unit of functions return value in its comment.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>

The current code only reports whether the battery is charging or
discharging. But the battery also reports whether it is fully charged,
furthermore by look at if the battery is supplied we can tell whether it
is discharging or not charging.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NRodolfo Giometti <giometti@linux.it>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>

This patch adds MODULE_DEVICE_TABLE for module bq27x00_battery.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Tested-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NRodolfo Giometti <giometti@linux.it>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>

This patch add support for reporting properties
POWER_SUPPLY_PROP_CHARGE_NOW, POWER_SUPPLY_PROP_CHARGE_FULL,
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
POWER_SUPPLY_PROP_CHARGE_COUNTER, POWER_SUPPLY_PROP_ENERGY_NOW in
module bq27x00_battery.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>

This patch adds support for polling the battery state and generating a
power_supply_changed() event if it has changed.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>

This patch adds a register cache to the bq27x00 battery driver.
Usually multiple, if not all, power_supply properties are queried at once,
for example when an uevent is generated. Since some registers are used by
multiple properties caching the registers should reduce the number of
reads.

The cache is valid for 5 seconds this roughly matches the internal update
interval of the current register for the bq27000/bq27200.

Fast changing properties(*_NOW) which can be obtained by reading a single
register are not cached.

It will also be used in the follow up patch to check if the battery status
has been changed since the last update to emit power_supply_changed events.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>

This patch adds support for the bq27000 battery to the bq27x00 driver.
The bq27000 is similar to the bq27200 except that it uses the HDQ bus
instead of I2C to communicate with the host system.

The driver is implemented as a platform driver. The driver expects to be
provided with a read callback function through its platform data. The read
function is assumed to do the lowlevel HDQ handling and read out the value
of a certain register.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>

This patch simplifies the drivers data structure and moves code to be
shared by the bq27000 and bq27200/bq27500 init functions into a common
function.
This patch has no functional changes, it only moves code around.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NRodolfo Giometti <giometti@linux.it>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>

This patch changes get_property callback of the bq27x00 battery to return
-ENODEV for properties other then the PROP_PRESENT if the battery is not
present.
The power subsystem core expects a driver to behave that way.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NRodolfo Giometti <giometti@linux.it>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>

According to the bq27000 datasheet the current should be calculated by
the following formula:
    current = AI * 3570 / 20

This patch adjust the drivers code accordingly.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NRodolfo Giometti <giometti@linux.it>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>

This patch improves the precession of the temperature property of the
bq27x00 driver.
By dividing before multiplying the current code effectively cuts of the
last decimal digit. This patch fixes it by multiplying before dividing.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NRodolfo Giometti <giometti@linux.it>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>

This patch adds the type property to the bq27x00 battery driver.
All bq27x00 are lithium ion batteries.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NRodolfo Giometti <giometti@linux.it>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>

Calling device_add causes an inital uevent for that device to be generated.
The power_supply uevent function calls the drivers get_property function,
which might causes the driver to update its state, which again might
causes the driver to call power_supply_changed(). Since the power_supplys
changed_work has not been initialized at this point the behavior is
undefined and can result in an OOPS.

This patch fixes the issue by initializing the power_supplys changed_work
prior to adding the power_supplys device to the device tree.
Reported-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>

Sometimes a driver can not report a meaningful value for a certain property
and returns -ENODATA.

Currently when generating a uevent and a property return -ENODATA it is
treated as an error an no uevent is generated at all. This is not an
desirable behavior.

This patch adds a special case for -ENODATA and ignores properties which
return this error code when generating the uevent.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>

Add new trigger to power_supply LEDs. It will blink when battery is
charging, and stay solid when battery is charged. It's usefull to
indicate battery state when there's only one LED available.
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

As blink API is now available, it's possible to add ability to blink via
simple trigger.
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

Adding support for charge properties for gas gauge.

Also ensuring that battery mode is correct now for energy as well as
charge properties by setting it on the fly.

I also added 2 functions to power_supply.h to help identify the units for
specific properties more easily by power supplies.
Signed-off-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>

* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (101 commits)
  [media] staging/lirc: fix mem leaks and ptr err usage
  [media] hdpvr: reduce latency of i2c read/write w/recycled buffer
  [media] hdpvr: enable IR part
  [media] rc/mceusb: timeout should be in ns, not us
  [media] v4l2-device: fix 'use-after-freed' oops
  [media] v4l2-dev: don't memset video_device.dev
  [media] zoran: use video_device_alloc instead of kmalloc
  [media] w9966: zero device state after a detach
  [media] v4l: Fix a use-before-set in the control framework
  [media] v4l: Include linux/videodev2.h in media/v4l2-ctrls.h
  [media] DocBook/v4l: update V4L2 revision and update copyright years
  [media] DocBook/v4l: fix validation error in dev-rds.xml
  [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs
  [media] v4l2-ctrls: fix missing 'read-only' check
  [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c
  [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71
  [media] lirc_zilog: Update TODO.lirc_zilog
  [media] lirc_zilog: Add Andy Walls to copyright notice and authors list
  [media] lirc_zilog: Remove useless struct i2c_driver.command function
  [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function
  ...

Fix up comments in the key management code.  No functional changes.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do a bit of a style clean up in the key management code.  No functional
changes.

Done using:

  perl -p -i -e 's!^/[*]*/\n!!' security/keys/*.c
  perl -p -i -e 's!} /[*] end [a-z0-9_]*[(][)] [*]/\n!}\n!' security/keys/*.c
  sed -i -s -e ": next" -e N -e 's/^\n[}]$/}/' -e t -e P -e 's/^.*\n//' -e "b next" security/keys/*.c

To remove /*****/ lines, remove comments on the closing brace of a
function to name the function and remove blank lines before the closing
brace of a function.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix up CIFSSMBEcho for unaligned access
  cifs: fix unaligned accesses in cifsConvertToUCS
  cifs: clean up unaligned accesses in cifs_unicode.c
  cifs: fix unaligned access in check2ndT2 and coalesce_t2
  cifs: clean up unaligned accesses in validate_t2
  cifs: use get/put_unaligned functions to access ByteCount
  cifs: move time field in cifsInodeInfo
  cifs: TCP_Server_Info diet
  CIFS: Implement cifs_strict_readv (try #4)
  CIFS: Implement cifs_file_strict_mmap (try #2)
  CIFS: Implement cifs_strict_fsync
  CIFS: Make cifsFileInfo_put work with strict cache mode

* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  x86,percpu: Move out of place 64 bit ops into X86_64 section

* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: note the nested NOT_RUNNING test in worker_clr_flags() isn't a noop
  workqueue: relax lockdep annotation on flush_work()

Merge branch 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits)
  um: Use generic irq Kconfig
  tile: Use generic irq Kconfig
  sparc: Use generic irq Kconfig
  score: Use generic irq Kconfig
  powerpc: Use generic irq Kconfig
  parisc: Use generic irq Kconfig
  mn10300: Use generic irq Kconfig
  microblaze: Use generic irq Kconfig
  m68knommu: Use generic irq Kconfig
  ia64: Use generic irq Kconfig
  frv: Use generic irq Kconfig
  blackfin: Use generic irq Kconfig
  alpha: Use generic irq Kconfig
  genirq: Remove __do_IRQ
  m32r: Convert to generic irq Kconfig
  m32r: Convert usrv platform irq handling
  m32r: Convert opsput_lcdpld irq chip
  m32r: Convert opsput lanpld irq chip
  m32r: Convert opsput pld irq chip
  m32r: Convert opsput irq chip
  ...

* 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: p2m: correctly initialize partial p2m leaf
  xen: fix non-ANSI function warning in irq.c

Merge branches 'fixes' and 'fwnet' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: core: fix unstable I/O with Canon camcorder

* 'fwnet' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: net: is not experimental anymore
  firewire: net: invalidate ARP entries of removed nodes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix EAPD to low on CZC P10T tablet computer with ALC662
  ALSA: HDA: Add SKU ignore for another Thinkpad Edge 14
  ALSA: hda - Fix "unused variable" compile warning
  ALSA: hda - Add quirk for HP Z-series workstation
  Revert "ALSA: HDA: Create mixers on ALC887"
  ASoC: PXA: Fix codec address on Zipit Z2
  ASoC: PXA: Fix jack detection on Zipit Z2
  ASoC: Blackfin: fix DAI/SPORT config dependency issues
  ASoC: Blackfin TDM: use external frame syncs
  ASoC: Blackfin AC97: fix build error after multi-component update
  ASoC: Blackfin TDM: fix missed snd_soc_dai_get_drvdata update
  ASoC: documentation updates
  ALSA: ice1712 delta - initialize SPI clock

* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6:
  powerpc/83xx: fix build failures on dt compatible list.