- 31 3月, 2014 1 次提交
-
-
由 Daniel Borkmann 提交于
This patch adds a jited flag into sk_filter struct in order to indicate whether a filter is currently jited or not. The size of sk_filter is not being expanded as the 32 bit 'len' member allows upper bits to be reused since a filter can currently only grow as large as BPF_MAXINSNS. Therefore, there's enough room also for other in future needed flags to reuse 'len' field if necessary. The jited flag also allows for having alternative interpreter functions running as currently, we can only detect jit compiled filters by testing fp->bpf_func to not equal the address of sk_run_filter(). Joint work with Alexei Starovoitov. Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2014 3 次提交
-
-
由 Eric W. Biederman 提交于
Stop taking the transmit lock when a network device has specified NETIF_F_LLTX. If no locks needed to trasnmit a packet this is the ideal scenario for netpoll as all packets can be trasnmitted immediately. Even if some locks are needed in ndo_start_xmit skipping any unnecessary serialization is desirable for netpoll as it makes it more likely a debugging packet may be trasnmitted immediately instead of being deferred until later. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
The netpoll_rx_enable and netpoll_rx_disable functions have always controlled polling the network drivers transmit and receive queues. Rename them to netpoll_poll_enable and netpoll_poll_disable to make their functionality clear. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
The gfp parameter was added in: commit 47be03a2 Author: Amerigo Wang <amwang@redhat.com> Date: Fri Aug 10 01:24:37 2012 +0000 netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup() slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> The reason for the gfp parameter was removed in: commit c4cdef9b Author: dingtianhong <dingtianhong@huawei.com> Date: Tue Jul 23 15:25:27 2013 +0800 bonding: don't call slave_xxx_netpoll under spinlocks The slave_xxx_netpoll will call synchronize_rcu_bh(), so the function may schedule and sleep, it should't be called under spinlocks. bond_netpoll_setup() and bond_netpoll_cleanup() are always protected by rtnl lock, it is no need to take the read lock, as the slave list couldn't be changed outside rtnl lock. Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Nothing else that calls __netpoll_setup or ndo_netpoll_setup requires a gfp paramter, so remove the gfp parameter from both of these functions making the code clearer. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 3月, 2014 6 次提交
-
-
由 Vlad Yasevich 提交于
Some drivers incorrectly assign vlan acceleration features to vlan_features thus causing issues for Q-in-Q vlan configurations. Warn the user of such cases. Signed-off-by: NVlad Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
skb_network_protocol() already accounts for multiple vlan headers that may be present in the skb. However, skb_mac_gso_segment() doesn't know anything about it and assumes that skb->mac_len is set correctly to skip all mac headers. That may not always be the case. If we are simply forwarding the packet (via bridge or macvtap), all vlan headers may not be accounted for. A simple solution is to allow skb_network_protocol to return the vlan depth it has calculated. This way skb_mac_gso_segment will correctly skip all mac headers. Signed-off-by: NVlad Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
addrconf_join_solict and addrconf_join_anycast may cause actions which need rtnl locked, especially on first address creation. A new DAD state is introduced which defers processing of the initial DAD processing into a workqueue. To get rtnl lock we need to push the code paths which depend on those calls up to workqueues, specifically addrconf_verify and the DAD processing. (v2) addrconf_dad_failure needs to be queued up to the workqueue, too. This patch introduces a new DAD state and stop the DAD processing in the workqueue (this is because of the possible ipv6_del_addr processing which removes the solicited multicast address from the device). addrconf_verify_lock is removed, too. After the transition it is not needed any more. As we are not processing in bottom half anymore we need to be a bit more careful about disabling bottom half out when we lock spin_locks which are also used in bh. Relevant backtrace: [ 541.030090] RTNL: assertion failed at net/core/dev.c (4496) [ 541.031143] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 3.10.33-1-amd64-vyatta #1 [ 541.031145] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 541.031146] ffffffff8148a9f0 000000000000002f ffffffff813c98c1 ffff88007c4451f8 [ 541.031148] 0000000000000000 0000000000000000 ffffffff813d3540 ffff88007fc03d18 [ 541.031150] 0000880000000006 ffff88007c445000 ffffffffa0194160 0000000000000000 [ 541.031152] Call Trace: [ 541.031153] <IRQ> [<ffffffff8148a9f0>] ? dump_stack+0xd/0x17 [ 541.031180] [<ffffffff813c98c1>] ? __dev_set_promiscuity+0x101/0x180 [ 541.031183] [<ffffffff813d3540>] ? __hw_addr_create_ex+0x60/0xc0 [ 541.031185] [<ffffffff813cfe1a>] ? __dev_set_rx_mode+0xaa/0xc0 [ 541.031189] [<ffffffff813d3a81>] ? __dev_mc_add+0x61/0x90 [ 541.031198] [<ffffffffa01dcf9c>] ? igmp6_group_added+0xfc/0x1a0 [ipv6] [ 541.031208] [<ffffffff8111237b>] ? kmem_cache_alloc+0xcb/0xd0 [ 541.031212] [<ffffffffa01ddcd7>] ? ipv6_dev_mc_inc+0x267/0x300 [ipv6] [ 541.031216] [<ffffffffa01c2fae>] ? addrconf_join_solict+0x2e/0x40 [ipv6] [ 541.031219] [<ffffffffa01ba2e9>] ? ipv6_dev_ac_inc+0x159/0x1f0 [ipv6] [ 541.031223] [<ffffffffa01c0772>] ? addrconf_join_anycast+0x92/0xa0 [ipv6] [ 541.031226] [<ffffffffa01c311e>] ? __ipv6_ifa_notify+0x11e/0x1e0 [ipv6] [ 541.031229] [<ffffffffa01c3213>] ? ipv6_ifa_notify+0x33/0x50 [ipv6] [ 541.031233] [<ffffffffa01c36c8>] ? addrconf_dad_completed+0x28/0x100 [ipv6] [ 541.031241] [<ffffffff81075c1d>] ? task_cputime+0x2d/0x50 [ 541.031244] [<ffffffffa01c38d6>] ? addrconf_dad_timer+0x136/0x150 [ipv6] [ 541.031247] [<ffffffffa01c37a0>] ? addrconf_dad_completed+0x100/0x100 [ipv6] [ 541.031255] [<ffffffff8105313a>] ? call_timer_fn.isra.22+0x2a/0x90 [ 541.031258] [<ffffffffa01c37a0>] ? addrconf_dad_completed+0x100/0x100 [ipv6] Hunks and backtrace stolen from a patch by Stephen Hemminger. Reported-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Dropping packets in __dev_queue_xmit() when transmit queue is stopped (NIC TX ring buffer full or BQL limit reached) currently outputs a syslog message. It would be better to get a precise count of such events available in netdevice stats so that monitoring tools can have a clue. This extends the work done in caf586e5 ("net: add a core netdev->rx_dropped counter") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Add implementation for the add/del vxlan port ndo calls, using the CONFIG_DEV firmware command. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Introduce the CONFIG_DEV firmware command which we will use to configure the UDP port assumed by the firmware for the VXLAN offloads. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 3月, 2014 3 次提交
-
-
由 Zoltan Kiss 提交于
skb_zerocopy can copy elements of the frags array between skbs, but it doesn't orphan them. Also, it doesn't handle errors, so this patch takes care of that as well, and modify the callers accordingly. skb_tx_error() is also added to the callers so they will signal the failed delivery towards the creator of the skb. Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Kubeček 提交于
If an IPv6 host route with metrics exists, an attempt to add a new route for the same target with different metrics fails but rewrites the metrics anyway: 12sp0:~ # ip route add fec0::1 dev eth0 rto_min 1000 12sp0:~ # ip -6 route show fe80::/64 dev eth0 proto kernel metric 256 fec0::1 dev eth0 metric 1024 rto_min lock 1s 12sp0:~ # ip route add fec0::1 dev eth0 rto_min 1500 RTNETLINK answers: File exists 12sp0:~ # ip -6 route show fe80::/64 dev eth0 proto kernel metric 256 fec0::1 dev eth0 metric 1024 rto_min lock 1.5s This is caused by all IPv6 host routes using the metrics in their inetpeer (or the shared default). This also holds for the new route created in ip6_route_add() which shares the metrics with the already existing route and thus ip6_route_add() rewrites the metrics even if the new route ends up not being used at all. Another problem is that old metrics in inetpeer can reappear unexpectedly for a new route, e.g. 12sp0:~ # ip route add fec0::1 dev eth0 rto_min 1000 12sp0:~ # ip route del fec0::1 12sp0:~ # ip route add fec0::1 dev eth0 12sp0:~ # ip route change fec0::1 dev eth0 hoplimit 10 12sp0:~ # ip -6 route show fe80::/64 dev eth0 proto kernel metric 256 fec0::1 dev eth0 metric 1024 hoplimit 10 rto_min lock 1s Resolve the first problem by moving the setting of metrics down into fib6_add_rt2node() to the point we are sure we are inserting the new route into the tree. Second problem is addressed by introducing new flag DST_METRICS_FORCE_OVERWRITE which is set for a new host route in ip6_route_add() and makes ipv6_cow_metrics() always overwrite the metrics in inetpeer (even if they are not "new"); it is reset after that. v5: use a flag in _metrics member rather than one in flags v4: fix a typo making a condition always true (thanks to Hannes Frederic Sowa) v3: rewritten based on David Miller's idea to move setting the metrics (and allocation in non-host case) down to the point we already know the route is to be inserted. Also rebased to net-next as it is quite late in the cycle. Signed-off-by: NMichal Kubecek <mkubecek@suse.cz> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Neukum 提交于
This fixes a race which happens by freeing an object on the stack. Quoting Julius: > The issue is > that it calls usbnet_terminate_urbs() before that, which temporarily > installs a waitqueue in dev->wait in order to be able to wait on the > tasklet to run and finish up some queues. The waiting itself looks > okay, but the access to 'dev->wait' is totally unprotected and can > race arbitrarily. I think in this case usbnet_bh() managed to succeed > it's dev->wait check just before usbnet_terminate_urbs() sets it back > to NULL. The latter then finishes and the waitqueue_t structure on its > stack gets overwritten by other functions halfway through the > wake_up() call in usbnet_bh(). The fix is to just not allocate the data structure on the stack. As dev->wait is abused as a flag it also takes a runtime PM change to fix this bug. Signed-off-by: NOliver Neukum <oneukum@suse.de> Reported-by: NGrant Grundler <grundler@google.com> Tested-by: NGrant Grundler <grundler@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 3月, 2014 3 次提交
-
-
由 Siva Reddy 提交于
This patch adds support for Samsung 10Gb ethernet driver(sxgbe). - sxgbe core initialization - Tx and Rx support - MDIO support - ISRs for Tx and Rx - ifconfig support to driver Signed-off-by: NSiva Reddy Kallam <siva.kallam@samsung.com> Signed-off-by: NVipul Pandya <vipul.pandya@samsung.com> Signed-off-by: NGirish K S <ks.giri@samsung.com> Neatening-by: NJoe Perches <joe@perches.com> Signed-off-by: NByungho An <bh74.an@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The vlan support 2 proto: 802.1q and 802.1ad, so make a new function called vlan_dev_vlan_proto() which could return the vlan proto for input dev. Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
The packet hash can be considered a property of the packet, not just on RX path. This patch changes name of rxhash and l4_rxhash skbuff fields to be hash and l4_hash respectively. This includes changing uses of the field in the code which don't call the access functions. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2014 2 次提交
-
-
由 Eric W. Biederman 提交于
Replace kfree_skb with dev_kfree_skb_any in vlan_insert_tag as vlan_insert_tag can be called from hard irq context (netpoll) and from other contexts. dev_kfree_skb_any is used as vlan_insert_tag only frees the skb if the skb can not be modified to insert a tag, in which case vlan_insert_tag drops the skb. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Li RongQing 提交于
ip_rt_dump do nothing after IPv4 route caches removal, so we can remove it. Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 3月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
When changing one 16bit value by another in IP header, we can adjust the IP checksum by doing a simple operation described in RFC 1624, as reminded by David. csum_partial() is a complex function on x86_64, not really suited for small number of checksummed bytes. I spotted csum_partial() being in the top 20 most consuming functions (more than 1 %) in a GRO workload, which was rather unexpected. The caller was inet_gro_complete() doing a csum_replace2() when building the new IP header for the GRO packet. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 3月, 2014 1 次提交
-
-
由 Richard Cochran 提交于
This patch adds a pair of new ioctls to the PTP Hardware Clock device interface. Using the ioctls, user space programs can query each pin to find out its current function and also reprogram a different function if desired. Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2014 8 次提交
-
-
由 Hugh Dickins 提交于
Add remove_linear_migration_ptes_from_nonlinear(), to fix an interesting little include/linux/swapops.h:131 BUG_ON(!PageLocked) found by trinity: indicating that remove_migration_ptes() failed to find one of the migration entries that was temporarily inserted. The problem comes from remap_file_pages()'s switch from vma_interval_tree (good for inserting the migration entry) to i_mmap_nonlinear list (no good for locating it again); but can only be a problem if the remap_file_pages() range does not cover the whole of the vma (zap_pte() clears the range). remove_migration_ptes() needs a file_nonlinear method to go down the i_mmap_nonlinear list, applying linear location to look for migration entries in those vmas too, just in case there was this race. The file_nonlinear method does need rmap_walk_control.arg to do this; but it never needed vma passed in - vma comes from its own iteration. Reported-and-tested-by: NDave Jones <davej@redhat.com> Reported-and-tested-by: NSasha Levin <sasha.levin@oracle.com> Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Chan 提交于
According to "Universal Serial Bus Communications Class Subclass Specification for Mobile Broadband Interface Model, Revision 1.0, Errata-1" published by USB-IF, the wMTU field of the MBIM extended functional descriptor indicates the operator preferred MTU for IP data streams. This patch modifies cdc_ncm_setup to ensure that the MTU value set on the usbnet device does not exceed the operator preferred MTU indicated by wMTU if the MBIM device exposes a MBIM extended functional descriptor. Signed-off-by: NBen Chan <benchan@chromium.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Chan 提交于
This patch adds the MBIM extended functional descriptor structure defined in "Universal Serial Bus Communications Class Subclass Specification for Mobile Broadband Interface Model, Revision 1.0, Errata-1" published by USB-IF. Signed-off-by: NBen Chan <benchan@chromium.org> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
While it is true that getnstimeofday() uses about 40 cycles if TSC is available, it can use 1600 cycles if hpet is the clocksource. Switch to get_jiffies_64(), as this is more than enough, and go back to 60 seconds periods. Fixes: 8c27bd75 ("tcp: syncookies: reduce cookie lifetime to 128 seconds") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Acked-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matan Barak 提交于
Adds support for N-Port VFs, this includes: 1. Adding support in the wrapped FW command In wrapped commands, we need to verify and convert the slave's port into the real physical port. Furthermore, when sending the response back to the slave, a reverse conversion should be made. 2. Adjusting sqpn for QP1 para-virtualization The slave assumes that sqpn is used for QP1 communication. If the slave is assigned to a port != (first port), we need to adjust the sqpn that will direct its QP1 packets into the correct endpoint. 3. Adjusting gid[5] to modify the port for raw ethernet In B0 steering, gid[5] contains the port. It needs to be adjusted into the physical port. 4. Adjusting number of ports in the query / ports caps in the FW commands When a slave queries the hardware, it needs to view only the physical ports it's assigned to. 5. Adjusting the sched_qp according to the port number The QP port is encoded in the sched_qp, thus in modify_qp we need to encode the correct port in sched_qp. Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matan Barak 提交于
This patch adds the following utils: 1. Convert slave_id -> VF 2. Get the active ports by slave_id 3. Convert slave's port to real port 4. Get the slave's port from real port 5. Get all slaves that uses the i'th real port 6. Get all slaves that uses the i'th real port exclusively Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matan Barak 提交于
Adds the required data structures to support VFs with N (1 or 2) ports instead of always using the number of physical ports. Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vaibhav Nagarnaik 提交于
In event format strings, the array size is reported in two locations. One in array subscript and then via the "size:" attribute. The values reported there have a mismatch. For e.g., in sched:sched_switch the prev_comm and next_comm character arrays have subscript values as [32] where as the actual field size is 16. name: sched_switch ID: 301 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1;signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[32]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[32]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; After bisection, the following commit was blamed: 92edca07 tracing: Use direct field, type and system names This commit removes the duplication of strings for field->name and field->type assuming that all the strings passed in __trace_define_field() are immutable. This is not true for arrays, where the type string is created in event_storage variable and field->type for all array fields points to event_storage. Use __stringify() to create a string constant for the type string. Also, get rid of event_storage and event_storage_mutex that are not needed anymore. also, an added benefit is that this reduces the overhead of events a bit more: text data bss dec hex filename 8424787 2036472 1302528 11763787 b3804b vmlinux 8420814 2036408 1302528 11759750 b37086 vmlinux.patched Link: http://lkml.kernel.org/r/1392349908-29685-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: NVaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 20 3月, 2014 4 次提交
-
-
由 Emmanuel Grumbach 提交于
Add a bit in rx_status.vht_flags to let the low level driver notify mac80211 about a beamformed packet. Propagate this to the radiotap header. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Emmanuel Grumbach 提交于
On 2.4Ghz band, the channels overlap since the delta between different channels is 5Mhz while the width of the receiver is 20Mhz (at least). This means that we can hear beacons or probe responses from adjacent channels. These frames will have a significant lower RSSI which will feed all kinds of logic with inaccurate data. An obvious example is the roaming algorithm that will think our AP is getting weak and will try to move to another AP. In order to avoid this, update the signal only if the frame has been heard on the same channel as the one advertised by the AP in its DS / HT IEs. We refrain from updating the values only if the AP is already in the BSS list so that we will still have a valid (but inaccurate) value if the AP was heard on an adjacent channel only. To achieve this, stop taking the channel from DS / HT IEs in mac80211. The DS / HT IEs is taken into account to discard the frame if it was received on a disabled channel. This can happen due to the same phenomenon: the frame is sent on channel 12, but heard on channel 11 while channel 12 can be disabled on certain devices. Since this check is done in cfg80211, stop even checking this in mac80211. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> [remove unused rx_freq variable] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Eliad Peller 提交于
Drivers might want to have private data in addition to all other ieee80211_tx_info.status fields. The current ieee80211_tx_info.rate_driver_data overlaps with some of the non-rate data (e.g. ampdu_ack_len), so it might not be good enough. Since we already know how much free bytes remained, simply use this size to define (void *) array. While on it, change ack_signal type from int to the more explicit s32 type. Signed-off-by: NEliad Peller <eliadx.peller@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Vladimir Kondratiev 提交于
In the 802.11ad, aka DMG (Dynamic Multi-Gigabit), aka 60Ghz spec, maximum MSDU size extended to 7920 bytes. add #define for this. Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 19 3月, 2014 1 次提交
-
-
由 Bjørn Mork 提交于
This is a context modified revert of commit 6a9612e2 ("net: cdc_ncm: remove ncm_parm field") which introduced a NCM specification violation, causing setup errors for some devices. These errors resulted in the device and host disagreeing about shared settings, with complete failure to communicate as the end result. The NCM specification require that many of the NCM specific control reuests are sent only while the NCM Data Interface is in alternate setting 0. Reverting the commit ensures that we follow this requirement. Fixes: 6a9612e2 ("net: cdc_ncm: remove ncm_parm field") Reported-and-tested-by: NPasi Kärkkäinen <pasik@iki.fi> Reported-by: NThomas Schäfer <tschaefer@t-online.de> Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 3月, 2014 6 次提交
-
-
由 Eric W. Biederman 提交于
The netpoll packet receive code only becomes active if the netpoll rx_skb_hook is implemented, and there is not a single implementation of the netpoll rx_skb_hook in the kernel. All of the out of tree implementations I have found all call netpoll_poll which was removed from the kernel in 2011, so this change should not add any additional breakage. There are problems with the netpoll packet receive code. __netpoll_rx does not call dev_kfree_skb_irq or dev_kfree_skb_any in hard irq context. netpoll_neigh_reply leaks every skb it receives. Reception of packets does not work successfully on stacked devices (aka bonding, team, bridge, and vlans). Given that the netpoll packet receive code is buggy, there are no out of tree users that will be merged soon, and the code has not been used for in tree for a decade let's just remove it. Reverting this commit can server as a starting point for anyone who wants to resurrect netpoll packet reception support. Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Make rx_skb_hook, and rx in struct netpoll depend on CONFIG_NETPOLL_TRAP Make rx_lock, rx_np, and neigh_tx in struct netpoll_info depend on CONFIG_NETPOLL_TRAP Make the functions netpoll_rx_on, netpoll_rx, and netpoll_receive_skb no-ops when CONFIG_NETPOLL_TRAP is not set. Only build netpoll_neigh_reply, checksum_udp service_neigh_queue, pkt_is_ns, and __netpoll_rx when CONFIG_NETPOLL_TRAP is defined. Add helper functions netpoll_trap_setup, netpoll_trap_setup_info, netpoll_trap_cleanup, and netpoll_trap_cleanup_info that initialize and cleanup the struct netpoll and struct netpoll_info receive specific fields when CONFIG_NETPOLL_TRAP is enabled and do nothing otherwise. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Now that we no longer need to receive packets to safely drain the network drivers receive queue move netpoll_trap and netpoll_set_trap under CONFIG_NETPOLL_TRAP Making netpoll_trap and netpoll_set_trap noop inline functions when CONFIG_NETPOLL_TRAP is not set. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Change the strategy of netpoll from dropping all packets received during netpoll_poll_dev to calling napi poll with a budget of 0 (to avoid processing drivers rx queue), and to ignore packets received with netif_rx (those will safely be placed on the backlog queue). All of the netpoll supporting drivers have been reviewed to ensure either thay use netif_rx or that a budget of 0 is supported by their napi poll routine and that a budget of 0 will not process the drivers rx queues. Not dropping packets makes NETPOLL_RX_DROP unnecesary so it is removed. npinfo->rx_flags is removed as rx_flags with just the NETPOLL_RX_ENABLED flag becomes just a redundant mirror of list_empty(&npinfo->rx_np). Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Add a helper netpoll_rx_processing that reports when netpoll has receive side processing to perform. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Franky Lin 提交于
BCM4354 is an a/b/g/n/ac 2x2 WiFi chip. This patch adds support for it through SDIO interface. Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: NArend Van Spriel <arend@broadcom.com> Signed-off-by: NFranky Lin <frankyl@broadcom.com> Signed-off-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 15 3月, 2014 1 次提交
-
-
由 Eric W. Biederman 提交于
Replace the bh safe variant with the hard irq safe variant. We need a hard irq safe variant to deal with netpoll transmitting packets from hard irq context, and we need it in most if not all of the places using the bh safe variant. Except on 32bit uni-processor the code is exactly the same so don't bother with a bh variant, just have a hard irq safe variant that everyone can use. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-