We should use the gfp_flags that the caller specified instead of
GFP_KERNEL here.

There is only one caller and it uses GFP_KERNEL, so this change is
just a cleanup and doesn't change how the code works.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NAlex Elder <elder@dreamhost.com>

Given a large n, the bounds check (*p + n > end) can be bypassed due to
pointer wraparound.  A safer check is (n > end - *p).

[elder@dreamhost.com: inverted test and renamed ceph_has_room()]
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Reviewed-by: NAlex Elder <elder@dreamhost.com>

From Al Viro <viro@zeniv.linux.org.uk>

Al Viro noticed that we were using a non-cpu-encoded value in
a switch statement in osd_req_encode_op().  The result would
clearly not work correctly on a big-endian machine.
Signed-off-by: NAlex Elder <elder@dreamhost.com>

If we get an error code from crush_do_rule(), print an error to the
console.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Reflects ceph.git commit 46d63d98434b3bc9dad2fc9ab23cbaedc3bcb0e4.
Reported-by: NAlexander Lyakas <alex.bolshoy@gmail.com>
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Fix the node weight lookup for tree buckets by using a correct accessor.

Reflects ceph.git commit d287ade5bcbdca82a3aef145b92924cf1e856733.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

These were used for the ill-fated forcefeed feature.  Remove them.

Reflects ceph.git commit ebdf80edfecfbd5a842b71fbe5732857994380c1.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Remove forcefeed functionality from CRUSH.  This is an ugly misfeature that
is mostly useless and unused.  Remove it.

Reflects ceph.git commit ed974b5000f2851207d860a651809af4a1867942.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Conflicts:

	net/ceph/crush/mapper.c

Use a temporary variable here to avoid repeated array lookups and clean up
the code a bit.

This reflects ceph.git commit 6b5be27634ad307b471a5bf0db85c4f5c834885f.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

If we get a map that doesn't make sense, error out or ignore the badness
instead of BUGging out.  This reflects the ceph.git commits
9895f0bff7dc68e9b49b572613d242315fb11b6c and
8ded26472058d5205803f244c2f33cb6cb10de79.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

This small adjustment reflects a change that was made in ceph.git commit
af6a9f30696c900a2a8bd7ae24e8ed15fb4964bb, about 6 months ago.  An N-1
search is not exhaustive.  Fixed ceph.git bug #1594.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Move various types from int -> __u32 (or similar), and add const as
appropriate.

This reflects changes that have been present in the userland implementation
for some time.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Both of these methods perform similar checks; move that code to a helper
so that we can ensure the checks are consistent.
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

This was an ill-conceived feature that has been removed from Ceph.  Do
this gracefully:

 - reject attempts to specify a preferred_osd via the ioctl
 - stop exposing this information via virtual xattrs
 - always fill in -1 for requests, in case we talk to an older server
 - don't calculate preferred_osd placements/pgids
Reviewed-by: NAlex Elder <elder@inktank.com>
Signed-off-by: NSage Weil <sage@inktank.com>

A recent change made changes to the rbd_client_list be protected by
a spinlock.  Unfortunately in rbd_put_client(), the lock is taken
before possibly dropping the last reference to an rbd_client, and on
the last reference that eventually calls flush_workqueue() which can
sleep.

The problem was flagged by a debug spinlock warning:
    BUG: spinlock wrong CPU on CPU#3, rbd/27814

The solution is to move the spinlock acquisition and release inside
rbd_client_release(), which is the spot where it's really needed for
protecting the removal of the rbd_client from the client list.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NSage Weil <sage@newdream.net>

A new temporary header is allocated each time the header changes, but
only the changed properties are copied over. We don't need a new
semaphore for each header update.

This addresses http://tracker.newdream.net/issues/2174Signed-off-by: NJosh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: NAlex Elder <elder@dreamhost.com>

In ceph_vxattrcb_file_layout(), there is a check to determine
whether a preferred PG should be formatted into the output buffer.
That check assumes that a preferred PG number of 0 indicates "no
preference," but that is wrong.  No preference is indicated by a
negative (specifically, -1) PG number.

In addition, if that condition yields true, the preferred value
is formatted into a sized buffer, but the size consumed by the
earlier snprintf() call is not accounted for, opening up the
possibilty of a buffer overrun.

Finally, in ceph_vxattrcb_dir_rctime() where the nanoseconds part of
the time displayed did not include leading 0's, which led to
erroneous (sub-second portion of) time values being shown.

This fixes these three issues:
    http://tracker.newdream.net/issues/2155
    http://tracker.newdream.net/issues/2156
    http://tracker.newdream.net/issues/2157Signed-off-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NSage Weil <sage@newdream.net>

In write_partial_msg_pages(), every case now does an identical call
to kmap(page).  Instead, just call it once inside the CRC-computing
block where it's needed.  Move the definition of kaddr inside that
block, and make it a (char *) to ensure portable pointer arithmetic.

We still don't kunmap() it until after the sendpage() call, in case
that also ends up needing to use the mapping.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NSage Weil <sage@newdream.net>

In write_partial_msg_pages() there is a local variable used to
track the starting offset within a bio segment to use.  Its name,
"page_shift" defies the Linux convention of using that name for
log-base-2(page size).

Since it's only used in the bio case rename it "bio_offset".  Use it
along with the page_pos field to compute the memory offset when
computing CRC's in that function.  This makes the bio case match the
others more closely.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NSage Weil <sage@newdream.net>

There's not a lot of benefit to zero_page_address, which basically
holds a mapping of the zero page through the life of the messenger
module.  Even with our own mapping, the sendpage interface where
it's used may need to kmap() it again.  It's almost certain to
be in low memory anyway.

So stop treating the zero page specially in write_partial_msg_pages()
and just get rid of zero_page_address entirely.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NSage Weil <sage@newdream.net>

Make ceph_tcp_sendpage() be the only place kernel_sendpage() is
used, by using this helper in write_partial_msg_pages().
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NSage Weil <sage@newdream.net>

If a message queued for send gets revoked, zeroes are sent over the
wire instead of any unsent data.  This is done by constructing a
message and passing it to kernel_sendmsg() via ceph_tcp_sendmsg().

Since we are already working with a page in this case we can use
the sendpage interface instead.  Create a new ceph_tcp_sendpage()
helper that sets up flags to match the way ceph_tcp_sendmsg()
does now.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NSage Weil <sage@newdream.net>

CRC's are computed for all messages between ceph entities.  The CRC
computation for the data portion of message can optionally be
disabled using the "nocrc" (common) ceph option.  The default is
for CRC computation for the data portion to be enabled.

Unfortunately, the code that implements this feature interprets the
feature flag wrong, meaning that by default the CRC's have *not*
been computed (or checked) for the data portion of messages unless
the "nocrc" option was supplied.

Fix this, in write_partial_msg_pages() and read_partial_message().
Also change the flag variable in write_partial_msg_pages() to be
"no_datacrc" to match the usage elsewhere in the file.

This fixes http://tracker.newdream.net/issues/2064Signed-off-by: NAlex Elder <elder@dreamhost.com>
Reviewed-by: NSage Weil <sage@newdream.net>

Nothing too big here.
    - define the size of the buffer used for consuming ignored
      incoming data using a symbolic constant
    - simplify the condition determining whether to unmap the page
      in write_partial_msg_pages(): do it for crc but not if the
      page is the zero page
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Signed-off-by: NSage Weil <sage@newdream.net>

Make a small change in the code that counts down kvecs consumed by
a ceph_tcp_sendmsg() call.  Same functionality, just blocked out
a little differently.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Signed-off-by: NSage Weil <sage@newdream.net>

Move blocks of code out of loops in read_partial_message_section()
and read_partial_message().  They were only was getting called at
the end of the last iteration of the loop anyway.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Signed-off-by: NSage Weil <sage@newdream.net>

Calculate CRC in a separate step from rearranging the byte order
of the result, to improve clarity and readability.

Use offsetof() to determine the number of bytes to include in the
CRC calculation.

In read_partial_message(), switch which value gets byte-swapped,
since the just-computed CRC is already likely to be in a register.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Signed-off-by: NSage Weil <sage@newdream.net>

Change the name (and type) of a few CRC-related Boolean local
variables so they contain the word "do", to distingish their purpose
from variables used for holding an actual CRC value.

Note that in the process of doing this I identified a fairly serious
logic error in write_partial_msg_pages():  the value of "do_crc"
assigned appears to be the opposite of what it should be.  No
attempt to fix this is made here; this change preserves the
erroneous behavior.  The problem I found is documented here:
    http://tracker.newdream.net/issues/2064Signed-off-by: NAlex Elder <elder@dreamhost.com>
Signed-off-by: NSage Weil <sage@newdream.net>

Many ceph-related Boolean options offer the ability to both enable
and disable a feature.  For all those that don't offer this, add
a new option so that they do.

Note that ceph_show_options()--which reports mount options currently
in effect--only reports the option if it is different from the
default value.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Signed-off-by: NSage Weil <sage@newdream.net>

This gathers a number of very minor changes:
    - use %hu when formatting the a socket address's address family
    - null out the ceph_msgr_wq pointer after the queue has been
      destroyed
    - drop a needless cast in ceph_write_space()
    - add a WARN() call in ceph_state_change() in the event an
      unrecognized socket state is encountered
    - rearrange the logic in ceph_con_get() and ceph_con_put() so
      that:
        - the reference counts are only atomically read once
	- the values displayed via dout() calls are known to
	  be meaningful at the time they are formatted
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Signed-off-by: NSage Weil <sage@newdream.net>

There is no real need for ceph_tcp_connect() to return the socket
pointer it creates, since it already assigns it to con->sock, which
is visible to the caller.  Instead, have it return an error code,
which tidies things up a bit.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Signed-off-by: NSage Weil <sage@newdream.net>

Define a helper function to perform various cleanup operations.  Use
it both in the exit routine and in the init routine in the event of
an error.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Signed-off-by: NSage Weil <sage@newdream.net>

The messenger workqueue has no need to be public.  So give it static
scope.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Signed-off-by: NSage Weil <sage@newdream.net>

Encapsulate the operation of adding a new chunk of data to the next
open slot in a ceph_connection's out_kvec array.  Also add a "reset"
operation to make subsequent add operations start at the beginning
of the array again.

Use these routines throughout, avoiding duplicate code and ensuring
all calls are handled consistently.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Signed-off-by: NSage Weil <sage@newdream.net>

One of the arguments to prepare_write_connect() indicates whether it
is being called immediately after a call to prepare_write_banner().
Move the prepare_write_banner() call inside prepare_write_connect(),
and reinterpret (and rename) the "after_banner" argument so it
indicates that prepare_write_connect() should *make* the call
rather than should know it has already been made.

This was split out from the next patch to highlight this change in
logic.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Signed-off-by: NSage Weil <sage@newdream.net>

Currently an rbd device's id is released when it is removed, but it
is done before the code is run to clean up sysfs-related files (such
as /sys/bus/rbd/devices/1).

It's possible that an rbd is still in use after the rbd_remove()
call has been made.  It's essentially the same as an active inode
that stays around after it has been removed--until its final close
operation.  This means that the id shows up as free for reuse at a
time it should not be.

The effect of this was seen by Jens Rehpoehler, who:
    - had a filesystem mounted on an rbd device
    - unmapped that filesystem (without unmounting)
    - found that the mount still worked properly
    - but hit a panic when he attempted to re-map a new rbd device

This re-map attempt found the previously-unmapped id available.
The subsequent attempt to reuse it was met with a panic while
attempting to (re-)install the sysfs entry for the new mapped
device.

Fix this by holding off "putting" the rbd id, until the rbd_device
release function is called--when the last reference is finally
dropped.

Note: This fixes: http://tracker.newdream.net/issues/1907Signed-off-by: NAlex Elder <elder@dreamhost.com>
Signed-off-by: NSage Weil <sage@newdream.net>

Here is another set of small code tidy-ups:
    - Define SECTOR_SHIFT and SECTOR_SIZE, and use these symbolic
      names throughout.  Tell the blk_queue system our physical
      block size, in the (unlikely) event we want to use something
      other than the default.
    - Delete the definition of struct rbd_info, which is never used.
    - Move the definition of dev_to_rbd() down in its source file,
      just above where it gets first used, and change its name to
      dev_to_rbd_dev().
    - Replace an open-coded operation in rbd_dev_release() to use
      dev_to_rbd_dev() instead.
    - Calculate the segment size for a given rbd_device just once in
      rbd_init_disk().
    - Use the '%zd' conversion specifier in rbd_snap_size_show(),
      since the value formatted is a size_t.
    - Switch to the '%llu' conversion specifier in rbd_snap_id_show().
      since the value formatted is unsigned.
Signed-off-by: NAlex Elder <elder@dreamhost.com>

A few blocks of code are rearranged a bit here:
    - In rbd_header_from_disk():
	- Don't bother computing snap_count until we're sure the
	  on-disk header starts with a good signature.
	- Move a few independent lines of code so they are *after* a
	  check for a failed memory allocation.
	- Get rid of unnecessary local variable "ret".
    - Make a few other changes in rbd_read_header(), similar to the
      above--just moving things around a bit while preserving the
      functionality.
    - In rbd_rq_fn(), just assign rq in the while loop's controlling
      expression rather than duplicating it before and at the end of
      the loop body.  This allows the use of "continue" rather than
      "goto next" in a number of spots.
    - Rearrange the logic in snap_by_name().  End result is the same.
Signed-off-by: NAlex Elder <elder@dreamhost.com>

Once rbd_bus_type is registered, it allows an "add" operation via
the /sys/bus/rbd/add bus attribute, and adding a new rbd device that
way establishes a connection between the device and rbd_root_dev.
But rbd_root_dev is not registered until after the rbd_bus_type
registration is complete.  This could (in principle anyway) result
in an invalid state.

Since rbd_root_dev has no tie to rbd_bus_type we can reorder these
two initializations and never be faced with this scenario.

In addition, unregister the device in the event the bus registration
fails at module init time.
Signed-off-by: NAlex Elder <elder@dreamhost.com>
Signed-off-by: NSage Weil <sage@newdream.net>

The mon_addrs buffer in rbd_add is used to hold a copy of the
monitor IP addresses supplied via /sys/bus/rbd/add.  That is
passed to rbd_get_client(), which never modifies it (nor do
any of the functions it gets passed to thereafter)--the mon_addr
parameter to rbd_get_client() is a pointer to constant data, so it
can't be modifed.  Furthermore, rbd_get_client() has the length of
the mon_addrs buffer and that is used to ensure nothing goes beyond
its end.

Based on all this, there is no reason that a buffer needs to
be used to hold a copy of the mon_addrs provided via
/sys/bus/rbd/add.   Instead, the location within that passed-in
buffer can be provided, along with the length of the "token"
therein which represents the monitor IP's.

A small change to rbd_add_parse_args() allows the address within the
buffer to be passed back, and the length is already returned.  This
now means that, at least from the perspective of this interface,
there is no such thing as a list of monitor addresses that is too
long.
Signed-off-by: NAlex Elder <elder@dreamhost.com>