- 21 3月, 2011 2 次提交
-
-
由 Ondrej Zary 提交于
Remove unused dev_nr from struct tea575x_tuner. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Andres Mejia 提交于
Set EAPD for Realtek ALC665 (Vendor Id: 0x10eSet EAPD for Realtek ALC665 (Vendor Id: 0x10ec0665). Signed-off-by: NAndres Mejia <mcitadel@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 3月, 2011 1 次提交
-
-
由 Dan Rosenberg 提交于
The user-supplied index into the adapters array needs to be checked, or an out-of-bounds kernel pointer could be accessed and used, leading to potentially exploitable memory corruption. Signed-off-by: NDan Rosenberg <drosenberg@vsecurity.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 3月, 2011 1 次提交
-
-
由 Kirill A. Shutemov 提交于
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 3月, 2011 9 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vitaliy Kulikov 提交于
This patch replaces use of the harcoded arrays of pins, muxes, digital mics and adcs with the auto-generated ones using codec parsing and auto-discovers all actually connected digital mic pins on 92HD8X-like codecs This patch also adds the support for d-mic on pin 0x20. Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vitaliy Kulikov 提交于
When the mux for digital mic is different from the mux for other mics, the current auto-parser doesn't handle them in a right way but provides only one mic. This patch fixes the issue. Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Move the default input-src selection code for alc268/269 to the init part instead of the parser. The input-src selection might be overwritten by init verbs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Currently some special handling for the unusual case like dual-ADCs or a single-input-src is done in the tree-parse time in set_capture_mixer(). But this setup could be overwritten by static init verbs. This patch moves the initialization into the init phase so that such input-src setup won't be lost. Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Przemyslaw Bruski 提交于
Clear input settings before initialization. Signed-off-by: NPrzemyslaw Bruski <pbruskispam@op.pl> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Przemyslaw Bruski 提交于
SDPIF status retrieval always returned the default settings instead of the actual ones. Signed-off-by: NPrzemyslaw Bruski <pbruskispam@op.pl> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Przemyslaw Bruski 提交于
SPDIF status mask creation was incorrect. Signed-off-by: NPrzemyslaw Bruski <pbruskispam@op.pl> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Przemyslaw Bruski 提交于
microphone boost was set at +12dB, not +20dB (like in Windows driver and in adc_conf structure declaration), some comments added. Signed-off-by: NPrzemyslaw Bruski <pbruskispam@op.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 3月, 2011 9 次提交
-
-
由 Takashi Iwai 提交于
The time-out in snd_atiixp_aclink_reset() is wrongly checked, and it resulted in exiting from the loop at the first iteration. Reported-by: NAmir Shamsuddin <AmirS2+alsa@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Paul Bolle 提交于
Appending an 'm' will distinguish it from a similar struct in intel8x0.c Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Paul Bolle 提交于
Adding an 'm' will distinguish them from identical names in intel8x0.c. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Paul Bolle 提交于
At every resume a laptop I use prints this message (at KERN_ERR level): ALSA sound/pci/intel8x0m.c:904: AC'97 warm reset still in progress? [0x2] The thing to note here is that 0x2 corresponds to ICH_AC97COLD. Ie, what seems to be happening is that the register involved indicated a warm reset for some time (as the ICH_AC97WARM bit was set) but by the time the warning is printed, and that same register is checked again, that bit is already cleared and only the ICH_AC97COLD bit is still set. It turns out a warm reset needs some time to settle, but it is currently checked right away. The test therefore fails the first time it is done and schedule_timeout_uninterruptible() will be called. Once we return from that jiffies is already (far) past end_time on this laptop, so we exit the loop, print a warning, and exit the function while the warm reset actually succeeded. A way to fix this is to call usleep_range() after writing to the register involved. A handful of tests suggest 500 usecs is a safe value. (This might punish the "finish cold reset" case, but on this laptop such a cold reset apparently never happens, so I can't say for sure.) While we're at it drop the extra single tick from end_time, as it looks rather silly. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adam Lackorzynski 提交于
azx_init_pci() always writes PCI config register ICH6_PCIREG_TCSEL although this looks to be only defined on Intel systems and has a different meaning on AMD systems. On AMD systems the PCI interrupt pin control register is modified instead. Since the meaning of offset 0x44 in device specific configuration space is unknown for devices by other vendors, we only exclude AMD systems to retain the current behaviour. Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
Do not initialize again the what has already been initialized as multi outs, as this breaks surround speakers. Tested-by: NBartłomiej Żogała <nusch88@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
Without this change, a volume control named "Surround" or "Side" would get an unnecessary index, causing it to be ignored by the vmaster and PulseAudio. Tested-by: NBartłomiej Żogała <nusch88@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
When more than one pair of internal speakers is present, allow names according to their channels. Tested-by: NBartłomiej Żogała <nusch88@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
The pin config values would change the association instead of the sequence, this commit fixes that up. Tested-by: NBartłomiej Żogała <nusch88@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 3月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 3月, 2011 1 次提交
-
-
由 Adrian Knoth 提交于
The current AES32 firmware revision ID is 234, however, a user confirmed that everything works fine with the previous revision, too. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 3月, 2011 3 次提交
-
-
由 Takashi Iwai 提交于
The errata init verbs for CS42xx codecs contain the verbs to set the power-state of SPDIF nodes to D3, which seem to break the SPDIF output on some MacBooks. Since this is executed during the power-up initialization, we shouldn't turn them down there. Reported-by: NArun Raghavan <arun.raghavan@collabora.co.uk> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Since multiple codec drivers already use the input-jack stuff, let's make common helper functions to reduce the duplicated codes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Richard Samson 提交于
Added the missing HDMI codec IDs for new Nvidia stuff. Note that ID 0x17 isn't assigned to anything so far, as suggested by Stephen. [Modified to get rid of 0x17 by tiwai] Signed-off-by: NRichard Samson <samson.richard@gmail.com> Acked-by: NAcked-By: Stephen Warren <swarren@nvidia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 3月, 2011 1 次提交
-
-
由 Chih-Wei Huang 提交于
The codec of N82JV is ALC269VB. Signed-off-by: NChih-Wei Huang <cwhuang@linux.org.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 2月, 2011 5 次提交
-
-
由 David Henningsson 提交于
This patch fixes an error in the jack detection reporting, causing the jack detection sometimes not to be reported correctly to the input subsystem. It should apply to several Realtek codecs. Cc: stable@kernel.org Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
Depending on the model and the presence of a TCO module, the number of midi ports varies. Some have 1 port (MADIface), some have 2 (default), with TCO, there are 3. Don't hardcode the number of midi ports to initialize. This patch also fixes a boot lockup on MADIface. [Coding-style fixes by tiwai] Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
Don't continue if we cannot detect the real card type, otherwise, all subsequent functions, especially strcpy(), would fail, leaving the whole driver in an unusable state. Without such a protection, dmesg would look like this: Pid: 1525, comm: modprobe Not tainted 2.6.38-rc6 #1 MSI MS-7250/MS-7250 EIP: 0060:[<c114e700>] EFLAGS: 00010296 CPU: 1 EIP is at strcpy+0x10/0x30 EAX: f4d33e58 EBX: f5990800 ECX: f4d33e58 EDX: 00000000 ESI: 00000000 EDI: f4d33e58 EBP: f5990930 ESP: f3dd3e0c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 f53d4204 00000000 f90bfc03 00000001 00000001 f3dd3e64 c10fedff f3dd3e7c f3d854e4 f53d4000 c10307b8 00000001 c10307b8 f5990860 c10307b8 00000001 c10332e5 f59908bc c12f4339 f59908bc f5990860 c11ef207 f4d33e00 f53d4000 [<f90bfc03>] ? snd_hdspm_probe+0x7e7/0x1166 [snd_hdspm] [<c10fedff>] ? __sysfs_add_one+0x1f/0xf0 [<c10307b8>] ? get_parent_ip+0x8/0x20 [<c10307b8>] ? get_parent_ip+0x8/0x20 [<c10307b8>] ? get_parent_ip+0x8/0x20 [<c10332e5>] ? add_preempt_count+0xa5/0xd0 [<c12f4339>] ? _raw_spin_lock_irqsave+0x19/0x40 [<c11ef207>] ? pm_runtime_enable+0x17/0x80 [<c1160172>] ? local_pci_probe+0x42/0xb0 [<c1161091>] ? pci_device_probe+0x61/0x80 [<c11e9587>] ? driver_probe_device+0x77/0x180 [<c11600f0>] ? pci_match_device+0xa0/0xc0 [<c11e9709>] ? __driver_attach+0x79/0x80 [<c11e9690>] ? __driver_attach+0x0/0x80 [<c11e8e32>] ? bus_for_each_dev+0x52/0x80 [<c11e9416>] ? driver_attach+0x16/0x20 [<c11e9690>] ? __driver_attach+0x0/0x80 [<c11e8771>] ? bus_add_driver+0xa1/0x220 [<c1160f20>] ? pci_device_remove+0x0/0xf0 [<c11e99a3>] ? driver_register+0x63/0x120 [<c11612bd>] ? __pci_register_driver+0x3d/0xb0 [<c1001132>] ? do_one_initcall+0x32/0x160 [<f90d6000>] ? alsa_card_hdspm_init+0x0/0x14 [snd_hdspm] [<c10676a9>] ? sys_init_module+0x99/0x1e0 [<c10ade3d>] ? sys_close+0x6d/0xc0 [<c1002c90>] ? sysenter_do_call+0x12/0x26 ---[ end trace 239f0661c558378b ]--- Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
In contrast to the PCIe version (RME AES), the PCI version (RME AES32) has a different firmware revision. This patch adds the missing PCI revision. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 2月, 2011 3 次提交
-
-
由 Justin P. Mattock 提交于
The patch below removes an extra "l" in the word. Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Justin P. Mattock 提交于
The patch below removes an extra "l" in the word. Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vitaliy Kulikov 提交于
Also fix number of 92HD87 pins to exclude invalid pins. Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 2月, 2011 1 次提交
-
-
由 Łukasz Wojniłowicz 提交于
Lately I sent patch that switched lfe with side in mixer for acer-aspire-4930g. Then I connected 5.1 speaker system and noticed that lfe slider wasn't working and that old lfe slider worked. What I'm doing now is: - reverting old patch - adding internal lfe slider - removing side as it is superfluous (ALC888S-VC is 7.1 but in fact laptop can only do 5.1 and it is so in drivers for MS Windows) Signed-off-by: NŁukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 2月, 2011 3 次提交
-
-
由 David Henningsson 提交于
These two Dell machines have been reported working well with the ideapad model. BugLink: http://bugs.launchpad.net/bugs/723676 Cc: stable@kernel.org Tested-by: NDavid Chen <david.chen@canonical.com> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
Conexant 506e/20590 has the same graph as the rest of the 5066 family. BugLink: http://bugs.launchpad.net/bugs/723672 Cc: stable@kernel.org Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-