1. 18 7月, 2007 40 次提交
    • J
      xen: SMP guest support · f87e4cac
      Jeremy Fitzhardinge 提交于
      This is a fairly straightforward Xen implementation of smp_ops.
      
      Xen has its own IPI mechanisms, and has no dependency on any
      APIC-based IPI.  The smp_ops hooks and the flush_tlb_others pv_op
      allow a Xen guest to avoid all APIC code in arch/i386 (the only apic
      operation is a single apic_read for the apic version number).
      
      One subtle point which needs to be addressed is unpinning pagetables
      when another cpu may have a lazy tlb reference to the pagetable. Xen
      will not allow an in-use pagetable to be unpinned, so we must find any
      other cpus with a reference to the pagetable and get them to shoot
      down their references.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Signed-off-by: NChris Wright <chrisw@sous-sol.org>
      Cc: Benjamin LaHaise <bcrl@kvack.org>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Andi Kleen <ak@suse.de>
      f87e4cac
    • J
      xen: Implement sched_clock · ab550288
      Jeremy Fitzhardinge 提交于
      Implement xen_sched_clock, which returns the number of ns the current
      vcpu has been actually in an unstolen state (ie, running or blocked,
      vs runnable-but-not-running, or offline) since boot.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Acked-by: NChris Wright <chrisw@sous-sol.org>
      Cc: john stultz <johnstul@us.ibm.com>
      ab550288
    • J
      xen: Account for stolen time · f91a8b44
      Jeremy Fitzhardinge 提交于
      This patch accounts for the time stolen from our VCPUs.  Stolen time is
      time where a vcpu is runnable and could be running, but all available
      physical CPUs are being used for something else.
      
      This accounting gets run on each timer interrupt, just as a way to get
      it run relatively often, and when interesting things are going on.
      Stolen time is not really used by much in the kernel; it is reported
      in /proc/stats, and that's about it.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Acked-by: NChris Wright <chrisw@sous-sol.org>
      Cc: john stultz <johnstul@us.ibm.com>
      Cc: Rik van Riel <riel@redhat.com>
      f91a8b44
    • J
      xen: ignore RW mapping of RO pages in pagetable_init · 9a4029fd
      Jeremy Fitzhardinge 提交于
      When setting up the initial pagetable, which includes mappings of all
      low physical memory, ignore a mapping which tries to set the RW bit on
      an RO pte.  An RO pte indicates a page which is part of the current
      pagetable, and so it cannot be allowed to become RW.
      
      Once xen_pagetable_setup_done is called, set_pte reverts to its normal
      behaviour.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Acked-by: NChris Wright <chrisw@sous-sol.org>
      Cc: ebiederm@xmission.com (Eric W. Biederman)
      9a4029fd
    • J
      xen: Complete pagetable pinning · f4f97b3e
      Jeremy Fitzhardinge 提交于
      Xen requires all active pagetables to be marked read-only.  When the
      base of the pagetable is loaded into %cr3, the hypervisor validates
      the entire pagetable and only allows the load to proceed if it all
      checks out.
      
      This is pretty slow, so to mitigate this cost Xen has a notion of
      pinned pagetables.  Pinned pagetables are pagetables which are
      considered to be active even if no processor's cr3 is pointing to is.
      This means that it must remain read-only and all updates are validated
      by the hypervisor.  This makes context switches much cheaper, because
      the hypervisor doesn't need to revalidate the pagetable each time.
      
      This also adds a new paravirt hook which is called during setup once
      the zones and memory allocator have been initialized.  When the
      init_mm pagetable is first built, the struct page array does not yet
      exist, and so there's nowhere to put he init_mm pagetable's PG_pinned
      flags.  Once the zones are initialized and the struct page array
      exists, we can set the PG_pinned flags for those pages.
      
      This patch also adds the Xen support for pte pages allocated out of
      highmem (highpte) by implementing xen_kmap_atomic_pte.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Signed-off-by: NChris Wright <chrisw@sous-sol.org>
      Cc: Zach Amsden <zach@vmware.com>
      f4f97b3e
    • J
      xen: configuration · e738fca8
      Jeremy Fitzhardinge 提交于
      Put config options for Xen after the core pieces are in place.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Signed-off-by: NChris Wright <chrisw@sous-sol.org>
      e738fca8
    • J
      xen: time implementation · 15c84731
      Jeremy Fitzhardinge 提交于
      Xen maintains a base clock which measures nanoseconds since system
      boot.  This is provided to guests via a shared page which contains a
      base time in ns, a tsc timestamp at that point and tsc frequency
      parameters.  Guests can compute the current time by reading the tsc
      and using it to extrapolate the current time from the basetime.  The
      hypervisor makes sure that the frequency parameters are updated
      regularly, paricularly if the tsc changes rate or stops.
      
      This is implemented as a clocksource, so the interface to the rest of
      the kernel is a simple clocksource which simply returns the current
      time directly in nanoseconds.
      
      Xen also provides a simple timer mechanism, which allows a timeout to
      be set in the future.  When that time arrives, a timer event is sent
      to the guest.  There are two timer interfaces:
       - An old one which also delivers a stream of (unused) ticks at 100Hz,
         and on the same event, the actual timer events.  The 100Hz ticks
         cause a lot of spurious wakeups, but are basically harmless.
       - The new timer interface doesn't have the 100Hz ticks, and can also
         fail if the specified time is in the past.
      
      This code presents the Xen timer as a clockevent driver, and uses the
      new interface by preference.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Signed-off-by: NChris Wright <chrisw@sous-sol.org>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      15c84731
    • J
      xen: event channels · e46cdb66
      Jeremy Fitzhardinge 提交于
      Xen implements interrupts in terms of event channels.  Each guest
      domain gets 1024 event channels which can be used for a variety of
      purposes, such as Xen timer events, inter-domain events,
      inter-processor events (IPI) or for real hardware IRQs.
      
      Within the kernel, we map the event channels to IRQs, and implement
      the whole interrupt handling using a Xen irq_chip.
      
      Rather than setting NR_IRQ to 1024 under PARAVIRT in order to
      accomodate Xen, we create a dynamic mapping between event channels and
      IRQs.  Ideally, Linux will eventually move towards dynamically
      allocating per-irq structures, and we can use a 1:1 mapping between
      event channels and irqs.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Signed-off-by: NChris Wright <chrisw@sous-sol.org>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Eric W. Biederman <ebiederm@xmission.com>
      e46cdb66
    • J
      xen: virtual mmu · 3b827c1b
      Jeremy Fitzhardinge 提交于
      Xen pagetable handling, including the machinery to implement direct
      pagetables.
      
      Xen presents the real CPU's pagetables directly to guests, with no
      added shadowing or other layer of abstraction.  Naturally this means
      the hypervisor must maintain close control over what the guest can put
      into the pagetable.
      
      When the guest modifies the pte/pmd/pgd, it must convert its
      domain-specific notion of a "physical" pfn into a global machine frame
      number (mfn) before inserting the entry into the pagetable.  Xen will
      check to make sure the domain is allowed to create a mapping of the
      given mfn.
      
      Xen also requires that all mappings the guest has of its own active
      pagetable are read-only.  This is relatively easy to implement in
      Linux because all pagetables share the same pte pages for kernel
      mappings, so updating the pte in one pagetable will implicitly update
      the mapping in all pagetables.
      
      Normally a pagetable becomes active when you point to it with cr3 (or
      the Xen equivalent), but when you do so, Xen must check the whole
      pagetable for correctness, which is clearly a performance problem.
      
      Xen solves this with pinning which keeps a pagetable effectively
      active even if its currently unused, which means that all the normal
      update rules are enforced.  This means that it need not revalidate the
      pagetable when loading cr3.
      
      This patch has a first-cut implementation of pinning, but it is more
      fully implemented in a later patch.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Signed-off-by: NChris Wright <chrisw@sous-sol.org>
      3b827c1b
    • J
      xen: Core Xen implementation · 5ead97c8
      Jeremy Fitzhardinge 提交于
      This patch is a rollup of all the core pieces of the Xen
      implementation, including:
       - booting and setup
       - pagetable setup
       - privileged instructions
       - segmentation
       - interrupt flags
       - upcalls
       - multicall batching
      
      BOOTING AND SETUP
      
      The vmlinux image is decorated with ELF notes which tell the Xen
      domain builder what the kernel's requirements are; the domain builder
      then constructs the address space accordingly and starts the kernel.
      
      Xen has its own entrypoint for the kernel (contained in an ELF note).
      The ELF notes are set up by xen-head.S, which is included into head.S.
      In principle it could be linked separately, but it seems to provoke
      lots of binutils bugs.
      
      Because the domain builder starts the kernel in a fairly sane state
      (32-bit protected mode, paging enabled, flat segments set up), there's
      not a lot of setup needed before starting the kernel proper.  The main
      steps are:
        1. Install the Xen paravirt_ops, which is simply a matter of a
           structure assignment.
        2. Set init_mm to use the Xen-supplied pagetables (analogous to the
           head.S generated pagetables in a native boot).
        3. Reserve address space for Xen, since it takes a chunk at the top
           of the address space for its own use.
        4. Call start_kernel()
      
      PAGETABLE SETUP
      
      Once we hit the main kernel boot sequence, it will end up calling back
      via paravirt_ops to set up various pieces of Xen specific state.  One
      of the critical things which requires a bit of extra care is the
      construction of the initial init_mm pagetable.  Because Xen places
      tight constraints on pagetables (an active pagetable must always be
      valid, and must always be mapped read-only to the guest domain), we
      need to be careful when constructing the new pagetable to keep these
      constraints in mind.  It turns out that the easiest way to do this is
      use the initial Xen-provided pagetable as a template, and then just
      insert new mappings for memory where a mapping doesn't already exist.
      
      This means that during pagetable setup, it uses a special version of
      xen_set_pte which ignores any attempt to remap a read-only page as
      read-write (since Xen will map its own initial pagetable as RO), but
      lets other changes to the ptes happen, so that things like NX are set
      properly.
      
      PRIVILEGED INSTRUCTIONS AND SEGMENTATION
      
      When the kernel runs under Xen, it runs in ring 1 rather than ring 0.
      This means that it is more privileged than user-mode in ring 3, but it
      still can't run privileged instructions directly.  Non-performance
      critical instructions are dealt with by taking a privilege exception
      and trapping into the hypervisor and emulating the instruction, but
      more performance-critical instructions have their own specific
      paravirt_ops.  In many cases we can avoid having to do any hypercalls
      for these instructions, or the Xen implementation is quite different
      from the normal native version.
      
      The privileged instructions fall into the broad classes of:
        Segmentation: setting up the GDT and the GDT entries, LDT,
           TLS and so on.  Xen doesn't allow the GDT to be directly
           modified; all GDT updates are done via hypercalls where the new
           entries can be validated.  This is important because Xen uses
           segment limits to prevent the guest kernel from damaging the
           hypervisor itself.
        Traps and exceptions: Xen uses a special format for trap entrypoints,
           so when the kernel wants to set an IDT entry, it needs to be
           converted to the form Xen expects.  Xen sets int 0x80 up specially
           so that the trap goes straight from userspace into the guest kernel
           without going via the hypervisor.  sysenter isn't supported.
        Kernel stack: The esp0 entry is extracted from the tss and provided to
           Xen.
        TLB operations: the various TLB calls are mapped into corresponding
           Xen hypercalls.
        Control registers: all the control registers are privileged.  The most
           important is cr3, which points to the base of the current pagetable,
           and we handle it specially.
      
      Another instruction we treat specially is CPUID, even though its not
      privileged.  We want to control what CPU features are visible to the
      rest of the kernel, and so CPUID ends up going into a paravirt_op.
      Xen implements this mainly to disable the ACPI and APIC subsystems.
      
      INTERRUPT FLAGS
      
      Xen maintains its own separate flag for masking events, which is
      contained within the per-cpu vcpu_info structure.  Because the guest
      kernel runs in ring 1 and not 0, the IF flag in EFLAGS is completely
      ignored (and must be, because even if a guest domain disables
      interrupts for itself, it can't disable them overall).
      
      (A note on terminology: "events" and interrupts are effectively
      synonymous.  However, rather than using an "enable flag", Xen uses a
      "mask flag", which blocks event delivery when it is non-zero.)
      
      There are paravirt_ops for each of cli/sti/save_fl/restore_fl, which
      are implemented to manage the Xen event mask state.  The only thing
      worth noting is that when events are unmasked, we need to explicitly
      see if there's a pending event and call into the hypervisor to make
      sure it gets delivered.
      
      UPCALLS
      
      Xen needs a couple of upcall (or callback) functions to be implemented
      by each guest.  One is the event upcalls, which is how events
      (interrupts, effectively) are delivered to the guests.  The other is
      the failsafe callback, which is used to report errors in either
      reloading a segment register, or caused by iret.  These are
      implemented in i386/kernel/entry.S so they can jump into the normal
      iret_exc path when necessary.
      
      MULTICALL BATCHING
      
      Xen provides a multicall mechanism, which allows multiple hypercalls
      to be issued at once in order to mitigate the cost of trapping into
      the hypervisor.  This is particularly useful for context switches,
      since the 4-5 hypercalls they would normally need (reload cr3, update
      TLS, maybe update LDT) can be reduced to one.  This patch implements a
      generic batching mechanism for hypercalls, which gets used in many
      places in the Xen code.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Signed-off-by: NChris Wright <chrisw@sous-sol.org>
      Cc: Ian Pratt <ian.pratt@xensource.com>
      Cc: Christian Limpach <Christian.Limpach@cl.cam.ac.uk>
      Cc: Adrian Bunk <bunk@stusta.de>
      5ead97c8
    • J
      Add nosegneg capability to the vsyscall page notes · 24037a8b
      Jeremy Fitzhardinge 提交于
      Add the "nosegneg" fake capabilty to the vsyscall page notes. This is
      used by the runtime linker to select a glibc version which then
      disables negative-offset accesses to the thread-local segment via
      %gs. These accesses require emulation in Xen (because segments are
      truncated to protect the hypervisor address space) and avoiding them
      provides a measurable performance boost.
      Signed-off-by: NIan Pratt <ian.pratt@xensource.com>
      Signed-off-by: NChristian Limpach <Christian.Limpach@cl.cam.ac.uk>
      Signed-off-by: NChris Wright <chrisw@sous-sol.org>
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Acked-by: NZachary Amsden <zach@vmware.com>
      Cc: Roland McGrath <roland@redhat.com>
      Cc: Ulrich Drepper <drepper@redhat.com>
      24037a8b
    • J
      Add a sched_clock paravirt_op · 688340ea
      Jeremy Fitzhardinge 提交于
      The tsc-based get_scheduled_cycles interface is not a good match for
      Xen's runstate accounting, which reports everything in nanoseconds.
      
      This patch replaces this interface with a sched_clock interface, which
      matches both Xen and VMI's requirements.
      
      In order to do this, we:
         1. replace get_scheduled_cycles with sched_clock
         2. hoist cycles_2_ns into a common header
         3. update vmi accordingly
      
      One thing to note: because sched_clock is implemented as a weak
      function in kernel/sched.c, we must define a real function in order to
      override this weak binding.  This means the usual paravirt_ops
      technique of using an inline function won't work in this case.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Cc: Zachary Amsden <zach@vmware.com>
      Cc: Dan Hecht <dhecht@vmware.com>
      Cc: john stultz <johnstul@us.ibm.com>
      688340ea
    • J
      paravirt: helper to disable all IO space · d572929c
      Jeremy Fitzhardinge 提交于
      In a virtual environment, device drivers such as legacy IDE will waste
      quite a lot of time probing for their devices which will never appear.
      This helper function allows a paravirt implementation to lay claim to
      the whole iomem and ioport space, thereby disabling all device drivers
      trying to claim IO resources.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Signed-off-by: NChris Wright <chrisw@sous-sol.org>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      d572929c
    • J
      paravirt: export __supported_pte_mask · bdef40a6
      Jeremy Fitzhardinge 提交于
      __supported_pte_mask is needed when constructing pte values.  Xen
      device drivers need to do this to make mappings of foreign pages (ie,
      pages granted to us by other domains).
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      bdef40a6
    • J
      paravirt: make siblingmap functions visible · c70df743
      Jeremy Fitzhardinge 提交于
      Paravirt implementations need to set the sibling map on new cpus.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      c70df743
    • J
      paravirt: unstatic smp_store_cpu_info · 724faa89
      Jeremy Fitzhardinge 提交于
      Paravirt implementations need to store cpu info when bringing up cpus.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      724faa89
    • J
      paravirt: unstatic leave_mm · 53787013
      Jeremy Fitzhardinge 提交于
      Make globally leave_mm visible, specifically so that Xen can use it to
      shoot-down lazy uses of cr3.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Signed-off-by: NChris Wright <chrisw@sous-sol.org>
      53787013
    • J
      paravirt: add a hook for once the allocator is ready · 6996d3b6
      Jeremy Fitzhardinge 提交于
      Add a hook so that the paravirt backend knows when the allocator is
      ready.  This is useful for the obvious reason that the allocator is
      available, but the other side-effect of having the bootmem allocator
      available is that each page now has an associated "struct page".
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      6996d3b6
    • J
      paravirt: add an "mm" argument to alloc_pt · fdb4c338
      Jeremy Fitzhardinge 提交于
      It's useful to know which mm is allocating a pagetable.  Xen uses this
      to determine whether the pagetable being added to is pinned or not.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      fdb4c338
    • J
      use elfnote.h to generate vsyscall notes. · 810bab44
      Jeremy Fitzhardinge 提交于
      Use existing elfnote.h to generate vsyscall notes, rather than doing
      it locally.  Changes elfnote.h a bit to suit, since this is the first
      asm user, and it wasn't quite right.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Cc: Roland McGrath <roland@redhat.com>
      Cc: Andrew Morton <akpm@linux-foundation.com>
      810bab44
    • J
      usermodehelper: Tidy up waiting · 86313c48
      Jeremy Fitzhardinge 提交于
      Rather than using a tri-state integer for the wait flag in
      call_usermodehelper_exec, define a proper enum, and use that.  I've
      preserved the integer values so that any callers I've missed should
      still work OK.
      Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
      Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
      Cc: Randy Dunlap <randy.dunlap@oracle.com>
      Cc: Christoph Hellwig <hch@infradead.org>
      Cc: Andi Kleen <ak@suse.de>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Johannes Berg <johannes@sipsolutions.net>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
      Cc: Joel Becker <joel.becker@oracle.com>
      Cc: Tony Luck <tony.luck@intel.com>
      Cc: Kay Sievers <kay.sievers@vrfy.org>
      Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
      Cc: Oleg Nesterov <oleg@tv-sign.ru>
      Cc: David Howells <dhowells@redhat.com>
      86313c48
    • Y
      serial: add early_serial_setup() back to header file · b187f180
      Yinghai Lu 提交于
      early_serial_setup was removed from serial.h, but forgot to put in
      serial_8250.h
      Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b187f180
    • O
      [SPARC64]: Kill bogus set_fs(KERNEL_DS) in do_rt_sigreturn(). · 62715ec8
      Oleg Nesterov 提交于
      From: Oleg Nesterov <oleg@tv-sign.ru>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      62715ec8
    • J
      arch/i386/* fs/* ipc/*: mark variables with uninitialized_var() · 8e1c091c
      Jeff Garzik 提交于
      Mark variables with uninitialized_var() if such a warning appears,
      and analysis proves that the var is initialized properly on all paths
      it is used.
      Signed-off-by: NJeff Garzik <jeff@garzik.org>
      8e1c091c
    • D
      [SPARC64]: Update defconfig. · c1e49e3a
      David S. Miller 提交于
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c1e49e3a
    • D
      [SPARC64]: Kill explicit %gl register reference. · 41120551
      David S. Miller 提交于
      Older binutils can't handle it.  Use SET_GL() instead,
      which is explicitly for this purpose.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      41120551
    • A
    • A
      um_kmalloc() remnants · 6d0fd9c9
      Al Viro 提交于
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      Acked-by: NJeff Dike <jdike@addtoit.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6d0fd9c9
    • A
    • A
      alpha __init fixes · cc040a8a
      Al Viro 提交于
      __init and __initdata stuff used from __devinit one
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      cc040a8a
    • G
      Cell: Draw SPE helper penguin logos · bce94513
      Geert Uytterhoeven 提交于
      Let spu_management_ops.enumerate_spus() return the number of found SPEs
      and use that information to draw some little helper penguin logos.
      Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
      Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
      Acked-by: NArnd Bergmann <arnd@arndb.de>
      Acked-By: NJames Simmons <jsimmons@infradead.org>
      Cc: "Antonino A. Daplas" <adaplas@pol.net>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bce94513
    • A
      fbcon: allow fbcon to use the primary display driver · 623e71b0
      Antonino A. Daplas 提交于
      Allow fbcon to select the primary display adapter using the
      fb_is_primary_device() arch-specific helper.  If a a primary adapter is
      detected, fbcon will unbind the old adapter from the VT layer, then rebind
      using the new adapter.  This requires that bind_/unbind_con_driver() be made
      public.
      
      Because this feature may produce unexpected behavior (from the user's POV),
      this must be explicitly enabled in Kconfig.
      
      [akpm@linux-foundation.org: export unbind_con_driver]
      Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      623e71b0
    • A
      fbdev: detect primary display device · 317b3c21
      Antonino A. Daplas 提交于
      Add function helper, fb_is_primary_device().  Given struct fb_info, it will
      return a nonzero value if the device is the primary display.
      
      Currently, only the i386 is supported where the function checks for the
      IORESOURCE_ROM_SHADOW flag.
      Signed-off-by: NAntonino Daplas <adaplas@gmail.com>
      Cc: David Miller <davem@davemloft.net>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      317b3c21
    • D
      csb337 supports "new style" rtc-ds1307 · b5b9068c
      David Brownell 提交于
      Update csb337 board specific init to support "new style" rtc-ds1307 code.
      Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
      Cc: Andrew Victor <andrew@sanpeople.com>
      Cc: Bill Gatliff <bgat@billgatliff.com>
      Cc: Alessandro Zummo <a.zummo@towertech.it>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b5b9068c
    • M
      Thecus N2100: register rtc-rs5c372 i2c device · c00593f6
      Martin Michlmayr 提交于
      Use the new i2c framework to load rtc-rs5c372 for the Thecus N2100.
      Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
      Tested-by: NVoipio Riku <Riku.Voipio@movial.fi>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Lennert Buytenhek <buytenh@wantstofly.org>
      Cc: Jean Delvare <khali@linux-fr.org>
      Cc: David Brownell <david-b@pacbell.net>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c00593f6
    • A
      SPI master driver for Xilinx virtex · ae918c02
      Andrei Konovalov 提交于
      Simple SPI master driver for Xilinx SPI controller.
      No support for multiple masters.
      Not using level 1 drivers from EDK.
      
      [akpm@linux-foundation.org: uninlining]
      Signed-off-by: NYuri Frolov <yfrolov@ru.mvista.com>
      Signed-off-by: NAndrei Konovalov <akonovalov@ru.mvista.com>
      Cc: Kumar Gala <galak@gate.crashing.org>
      Cc: David Brownell <david-b@pacbell.net>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ae918c02
    • A
      x86_64: speedup touch_nmi_watchdog · 567f3e42
      Andrew Morton 提交于
      Avoid dirtying remote cpu's memory if it already has the correct value.
      
      Cc: Andi Kleen <ak@suse.de>
      Cc: Konrad Rzeszutek <konrad@darnok.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      567f3e42
    • A
      i386: speedup touch_nmi_watchdog · f2890255
      Andrew Morton 提交于
      Avoid dirtying remote cpu's memory if it already has the correct value.
      
      Cc: Andi Kleen <ak@suse.de>
      Cc: Konrad Rzeszutek <konrad@darnok.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f2890255
    • K
      Inhibit NMI watchdog when Alt-SysRq-T operation is underway · 1c978b93
      Konrad Rzeszutek 提交于
      On large memory configuration with not so fast CPUs the NMI watchdog is
      triggered when memory addresses are being gathered and printed.  The code
      paths for Alt-SysRq-t are sprinkled with touch_nmi_watchdog in various
      places but not in this routine (or in the loop that utilizes this
      function).  The patch has been tested for regression on large CPU+memory
      configuration (128 logical CPUs + 224 GB) and 1,2,4,16-CPU sockets with
      various memory sizes (1,2,4,6,20).
      
      Cc: Andi Kleen <ak@suse.de>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1c978b93
    • A
      Kprobes on select architectures no longer EXPERIMENTAL · 87a7defb
      Ananth N Mavinakayanahalli 提交于
      Based on usage and testing over the past couple of years, kprobes on
      i386, ia64, powerpc and x86_64 is no longer EXPERIMENTAL.
      
      This is a follow-up to Robert P.J. Day's patch making "Instrumentation
      support" non-EXPERIMENTAL:
      
      	http://marc.info/?l=linux-kernel&m=118396955423812&w=2
      
      Arch maintainers for sparc64, avr32 and s390 need to take a similar call.
      Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
      Cc: Andi Kleen <ak@suse.de>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      87a7defb