Introduced by commit 79393fc4 ("kobject:
convert pseries/power.c to kobj_attr interface").

sys_create_file takes a "struct attrbute *" not a "struct kobj_addribute *".

arch/powerpc/platforms/pseries/power.c: In function 'apo_pm_init':
arch/powerpc/platforms/pseries/power.c:78: warning: passing argument 2 of 'sysfs_create_file' from incompatible pointer type
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Mackerras <paulus@au.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove warning:

arch/powerpc/sysdev/mpic_pasemi_msi.c: In function 'pasemi_msi_setup_msi_irqs':
arch/powerpc/sysdev/mpic_pasemi_msi.c:135: warning: 'addr' is used uninitialized in this function

Turns out addr wasn't even used, it's a leftover from the u3msi code.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Setup i2c_board_info based on device tree contents.  This has to be
a device_initcall since we need PCI to be probed by the time we
run it, but before the actual driver is initialized.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

At present, the __spufs_trap_data_map and __spu_trap_data_seq functions
exit if spu->flags has the SPU_CONTEXT_SWITCH_ACTIVE set. This was
resulting in suprious returns from these functions, as they may be
legitimately called when we have this bit set.

We only use it in these two sanity checks, so this change removes the
flag completely. This fixes hangs in the page-fault path of SPE apps.
Signed-off-by: NAndre Detsch <adetsch@br.ibm.com>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>

Introduced by commit 79393fc4
("kobject: convert pseries/power.c to kobj_attr interface").

sys_create_file takes a "struct attrbute *" not a "struct
kobj_addribute *".

arch/powerpc/platforms/pseries/power.c: In function 'apo_pm_init':
arch/powerpc/platforms/pseries/power.c:78: warning: passing argument 2 of 'sysfs_create_file' from incompatible pointer type
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

GCC versions before 3.4 did not support the -mcpu=440 option.  Use
-mcpu=405 for the 4xx specific bootwrapper files, as that has been
around for much longer.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

dt_mem_next_cell() currently does of_read_ulong().  This does not
allow for the case where #size-cells and/or #address-cells = 2 on a
32-bit system, as it will end up reading 32 bits instead of the
expected 64.  Change it to use of_read_number instead and always
return a u64.

Signed-off-by: Becky Bruce <becky.bruce at freescale.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fix sparse warnings in powerpc kprobes:

  CHECK   arch/powerpc/kernel/kprobes.c
arch/powerpc/kernel/kprobes.c:277:6: warning: symbol 'kretprobe_trampoline_holder' was not declared. Should it be static?
arch/powerpc/kernel/kprobes.c:287:15: warning: symbol 'trampoline_probe_handler' was not declared. Should it be static?
arch/powerpc/kernel/kprobes.c:525:16: warning: symbol 'jprobe_return_end' was not declared. Should it be static?

Fix along the same lines as http://lkml.org/lkml/2008/2/13/642Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

I suggest to make the vdso_install step independent as
in following patch.

This solves the issue at ahnd and still gives us the posibility
to install the files should they be needed.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

2.6.25 has a regression where we can starve the scheduler by creating
(N_SPES+1) contexts, then running them one at a time.

The final context will never be run, as the other contexts are loaded on
the SPEs, none of which are repoted as free (ie, spu->alloc_state !=
SPU_FREE), so spu_get_idle() doesn't give us a spu to run on. Because
all of the contexts are stopped, none are descheduled by the scheduler
tick, as spusched_tick returns if spu_stopped(ctx).

This change replaces the spu_stopped() check with checking for SCHED_IDLE
in ctx->policy. We set a context's policy to SCHED_IDLE when we're not
in spu_run(). We also favour SCHED_IDLE contexts when looking for contexts
to unbind, but leave their timeslice intact for later resumption.

This patch fixes the following test in the spufs-testsuite:
  tests/20-scheduler/02-yield-starvation
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>

Add a multiboard defconfig for PowerPC 44x now that the wrapper can create
the proper zImages for multiple boards.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Clean up some whitespace issues in the 44x Kconfig file.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Update the 4xx defconfigs to remove WANT_DEVICE_TREE and add MTD_OF_PARTS
where appropriate.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

Remove all "i2c" and "xxmii-interface" (rgmii etc) device_type entries
from the 4xx dts files.
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

get_dcookie() is always called with a dentry and a vfsmount from a struct
path.  Make get_dcookie() take it directly as an argument.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NJan Blunck <jblunck@suse.de>
Acked-by: NChristoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* Add path_put() functions for releasing a reference to the dentry and
  vfsmount of a struct path in the right order

* Switch from path_release(nd) to path_put(&nd->path)

* Rename dput_path() to path_put_conditional()

[akpm@linux-foundation.org: fix cifs]
Signed-off-by: NJan Blunck <jblunck@suse.de>
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Acked-by: NChristoph Hellwig <hch@lst.de>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is the central patch of a cleanup series. In most cases there is no good
reason why someone would want to use a dentry for itself. This series reflects
that fact and embeds a struct path into nameidata.

Together with the other patches of this series
- it enforced the correct order of getting/releasing the reference count on
  <dentry,vfsmount> pairs
- it prepares the VFS for stacking support since it is essential to have a
  struct path in every place where the stack can be traversed
- it reduces the overall code size:

without patch series:
   text    data     bss     dec     hex filename
5321639  858418  715768 6895825  6938d1 vmlinux

with patch series:
   text    data     bss     dec     hex filename
5320026  858418  715768 6894212  693284 vmlinux

This patch:

Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix cifs]
[akpm@linux-foundation.org: fix smack]
Signed-off-by: NJan Blunck <jblunck@suse.de>
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Acked-by: NChristoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CONFIG_DEVICE_TREE was the only user of CONFIG_WANT_DEVICE_TREE but
it was removed in commit id 25431333
(bootwrapper: Build multiple cuImages).

This removes CONFIG_WANT_DEVICE_TREE from Kconfig and the defconfigs.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

arch/powerpc/platforms/cell/ras.c still has DEBUG #defined, which is no
longer necessary.  Disable it - this disables two pr_debugs().

While we're there this file should have a copyright notice and license,
so add both.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This fixes the following section mismatch:

<--  snip  -->

...
WARNING: vmlinux.o(.text+0x55648): Section mismatch in reference from the function .free_node() to the function .init.text:.free_property()
...

<--  snip  -->
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This fixes the following section mismatches:

<--  snip  -->

...
WARNING: vmlinux.o(.text+0xe49c): Section mismatch in reference from the function .vdso_do_func_patch64() to the function .init.text:.find_symbol64()
WARNING: vmlinux.o(.text+0xe4d0): Section mismatch in reference from the function .vdso_do_func_patch64() to the function .init.text:.find_symbol64()
WARNING: vmlinux.o(.text+0xe56c): Section mismatch in reference from the function .vdso_do_func_patch32() to the function .init.text:.find_symbol32()
WARNING: vmlinux.o(.text+0xe5a0): Section mismatch in reference from the function .vdso_do_func_patch32() to the function .init.text:.find_symbol32()
...

<--  snip  -->
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

vmlinux.lds and dtc-parser.tab.h get created but never cleaned up.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fix a bug in the lv1_get_repository_node_value() routine of the PS3
bootwrapper.  Changes in the PS3 system firmware 2.20 cause this bug
to hang the system when branching from the bootwrapper to the kernel
_start.

Since the video system has not yet been enabled at the time
the bug is hit, the system hangs with a blank screen.  Earlier
firmwares don't cause such a catastrophic failure, and so this
bug went undetected.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The powerpc show_regs prints CPU using smp_processor_id: change that to
raw_smp_processor_id, so that when it's showing a WARN_ON backtrace without
preemption disabled, DEBUG_PREEMPT doesn't mess up that warning with its own.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RCU style multiple probes support for the Linux Kernel Markers.  Common case
(one probe) is still fast and does not require dynamic allocation or a
supplementary pointer dereference on the fast path.

- Move preempt disable from the marker site to the callback.

Since we now have an internal callback, move the preempt disable/enable to the
callback instead of the marker site.

Since the callback change is done asynchronously (passing from a handler that
supports arguments to a handler that does not setup the arguments is no
arguments are passed), we can safely update it even if it is outside the
preempt disable section.

- Move probe arm to probe connection. Now, a connected probe is automatically
  armed.

Remove MARK_MAX_FORMAT_LEN, unused.

This patch modifies the Linux Kernel Markers API : it removes the probe
"arm/disarm" and changes the probe function prototype : it now expects a
va_list * instead of a "...".

If we want to have more than one probe connected to a marker at a given
time (LTTng, or blktrace, ssytemtap) then we need this patch. Without it,
connecting a second probe handler to a marker will fail.

It allow us, for instance, to do interesting combinations :

Do standard tracing with LTTng and, eventually, to compute statistics
with SystemTAP, or to have a special trigger on an event that would call
a systemtap script which would stop flight recorder tracing.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Mason <mmlnx@us.ibm.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: David Smith <dsmith@redhat.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To allow flexible configuration of IDE introduce HAVE_IDE.
All archs except arm, um and s390 unconditionally select it.
For arm the actual configuration determine if IDE is supported.

This is a step towards introducing drivers/Kconfig for arm.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NRussell King - ARM Linux <linux@arm.linux.org.uk>
Acked-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Background: I've implemented 1K/2K page tables for s390.  These sub-page
page tables are required to properly support the s390 virtualization
instruction with KVM.  The SIE instruction requires that the page tables
have 256 page table entries (pte) followed by 256 page status table entries
(pgste).  The pgstes are only required if the process is using the SIE
instruction.  The pgstes are updated by the hardware and by the hypervisor
for a number of reasons, one of them is dirty and reference bit tracking.
To avoid wasting memory the standard pte table allocation should return
1K/2K (31/64 bit) and 2K/4K if the process is using SIE.

Problem: Page size on s390 is 4K, page table size is 1K or 2K.  That means
the s390 version for pte_alloc_one cannot return a pointer to a struct
page.  Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one
cannot return a pointer to a pte either, since that would require more than
32 bit for the return value of pte_alloc_one (and the pte * would not be
accessible since its not kmapped).

Solution: The only solution I found to this dilemma is a new typedef: a
pgtable_t.  For s390 pgtable_t will be a (pte *) - to be introduced with a
later patch.  For everybody else it will be a (struct page *).  The
additional problem with the initialization of the ptl lock and the
NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and
a destructor pgtable_page_dtor.  The page table allocation and free
functions need to call these two whenever a page table page is allocated or
freed.  pmd_populate will get a pgtable_t instead of a struct page pointer.
 To get the pgtable_t back from a pmd entry that has been installed with
pmd_populate a new function pmd_pgtable is added.  It replaces the pmd_page
call in free_pte_range and apply_to_pte_range.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a .show_options super operation to spufs.

Use generic_show_options() and save the complete option string in
spufs_fill_super().
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

simple_attr_close implementes ->release so it should be named accordingly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: <stefano.brivio@polimi.it>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg KH <greg@kroah.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sometimes simple attributes might need to return an error, e.g. for
acquiring a mutex interruptibly.  In fact we have that situation in
spufs already which is the original user of the simple attributes.  This
patch merged the temporarily forked attributes in spufs back into the
main ones and allows to return errors.

[akpm@linux-foundation.org: build fix]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: <stefano.brivio@polimi.it>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg KH <greg@kroah.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

walk_memory_resource() verifies if there are holes in a given memory
range, by checking against /proc/iomem.  On x86/ia64 system memory is
represented in /proc/iomem.  On powerpc, we don't show system memory as
IO resource in /proc/iomem - instead it's maintained in
/proc/device-tree.

This provides a way for an architecture to provide its own
walk_memory_resource() function.  On powerpc, the memory region is
small (16MB), contiguous and non-overlapping.  So extra checking
against the device-tree is not needed.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Enable hotplug memory remove for ppc64.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Supply remove_memory() function for 64-bit powerpc.  This is still
not quite complete as it needs to do some more arch-specific stuff,
which will be added in a later patch.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently the cell IOMMU fixed mapping just printks that it's been setup,
which is not particularly useful.  Much more interesting is the address
ranges for the different windows.  This adds one line to dmesg on a blade.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

If we get a 64-bit dma mask we switch to the fixed ops and call
cell_dma_dev_setup().  If the driver then switches back to a 32-bit dma
mask for any reason we don't call cell_dma_dev_setup() again, which
has the potential to leave bogus data in dev->archdata.dma_data.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In order for the cell IOMMU fixed mapping to work we need "dma-ranges"
properties in the device tree. If there are none then there's no point
enabling the fixed mapping support.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The cell IOMMU fixed mapping support has a null pointer bug if you run
it on older firmwares that don't contain the "dma-ranges" properties.
Fix it and convert to using of_get_next_parent() while we're there.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Stop bits are only valid when the running bit is not set.  Status bits
carry over from one invocation of spufs_run_spu() to another, so the
RUNNING bit gets added to the previous state of the register which may
have been a remote library call.  In this case, it looks like another
library routine should be invoked, but the spe is actually running.

This fixes a problem with a testcase that exercises the scheduler.
Signed-off-by: NLuke Browning <lukebrowning@us.ibm.com>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We don't need to update the libassist statistic with the context in a
runnable state, so do it after spu_disable_spu().
Signed-off-by: NLuke Browning <lukebrowning@us.ibm.com>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>