There was an error path that skipped the free_irq() step by mistake.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Currently the shdma dmaengine driver uses runtime PM to save power, when
no channel on the specific controller is requested by a user. This patch
switches the driver to count individual DMA transfers. That way the
controller can be powered down between transfers, even if some of its
channels are in use.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NVinod Koul <vinod.koul@linux.intel.com>

The IRQ handler of the shdma driver accesses common hardware registers,
that are also accessed from other contexts. Therefore access to them
has to be performed with interrupts disabled, not only with disabled
bottom halves.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NVinod Koul <vinod.koul@linux.intel.com>

Add missing include of linux/module.h to fix build error.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

dma_async_device_register will re-init chan_id and chancnt,
so whatever chan_id and chancnt are set in drivers, they will
be re-written by dma_async_device_register.

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Viresh Kumar <viresh.kumar@st.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Piotr Ziecik <kosmo@semihalf.com>
Cc: Yong Wang <yong.y.wang@intel.com>
Cc: Jaswinder Singh <jassi.brar@samsung.com>
Cc: Pelagicore AB <info@pelagicore.com>
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Acked-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

In pl08x_free_txd(), check if pool is allocated successfully before freeing it.
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Untill now, sg_len greater than one is not supported. This patch adds support to
do that.

Note: Still, if peripheral is flow controller, sg_len can't be greater that one.
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

On some sh-mobile systems there are more than one DMA controllers, that
can be used for serial ports. Specifying a DMA device in sh-sci platform
data unnecessarily restricts the driver to only use one DMA controller.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
[Fixed the trivial conflict in include/linux/serial_sci.h]
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch removes the samsung specific enum type 's3c2410_dmasrc'
and uses 'dma_data_direction' instead.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch adds to support the DMA PL330 driver that uses
DMA generic API. Samsung sound driver uses DMA generic API
if architecture supports it. Otherwise, use samsung specific
S3C-PL330 API driver to transfer PCM data.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Liam Girdwood <lrg@ti.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
[kgene.kim@samsung.com: removed useless variable]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch modifies to merge the dma control code. Original
s3c64xx spi driver has each dma control code for rx and tx
channel. This patch merges these dma control codes into one.
With this patch, a dma setup function and callback function
handle for both rx and tx channel.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch adds to support DMA generic API to transfer raw
SPI data. Basiclly the spi driver uses DMA generic API if
architecture supports it. Otherwise, uses Samsung specific
S3C-PL330 APIs.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Since DMA generic APIs can be used for Samsung DMA now so that
the s3c-pl330 which includes Samsung specific DMA APIs can be
removed.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch makes Samsung S5P64X0 to use DMA PL330 driver
on DMADEVICE. The S5P64X0 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch makes Samsung S5PC100 to use DMA PL330 driver
on DMADEVICE. The S5PC100 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch makes Samsung S5PV210 to use DMA PL330 driver
on DMADEVICE. The S5PV210 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch makes Samsung EXYNOS4 to use DMA PL330 driver
on DMADEVICE. The EXYNOS4 uses DMA generic APIs instead of
SAMSUNG specific S3C-PL330 APIs.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch adds common DMA operations which are used for Samsung DMA
drivers. Currently there are two types of DMA driver for Samsung SoCs.
The one is S3C-DMA for S3C SoCs and the other is PL330-DMA for S5P SoCs.
This patch provides funcion pointers for common DMA operations to DMA
client driver like SPI and Audio. It makes DMA client drivers support
multi-platform.
In addition, this common DMA operations implement the shared actions
that are needed for DMA client driver. For example shared actions are
filter() function for dma_request_channel() and parameter passing for
device_prep_slave_sg().
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch adds to support PL330-DMA driver on DMADEVICE for S5P SoCs.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch adds DMA_CYCLIC capability that is used for audio driver.
DMA driver activated with it reuses the dma requests that were submitted
through tx_submit().
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Original code carries out the start operation after flush operation.
But start operation is not required for DMA_TERMINATE_ALL command.
So, this patch removes the unnecessary start operation and only carries out
the flush operation for handling DMA_TERMINATE_ALL command.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
[Fixed typos in changelog]
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

This patch updates following 3 items.
1. Removes unneccessary code.
2. Add AMBA, PL330 configuration
3. Change the meaning of 'peri_id' variable
   from PL330 event number to specific dma id by user.
Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Signed-off-by: NBoojin Kim <boojin.kim@samsung.com>
Acked-by: NJassi Brar <jassisinghbrar@gmail.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Before converting the dma channel to our private data structure, first
check that the channel is indeed one which our driver registered.  We
do this by ensuring that the underlying device is bound to our driver.

This avoids potential oopses if we try to reference 'plchan->name'
against a foreign drivers dma channel.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Prepared descriptors that are not submitted will not be freed. Add
prepared descriptor to a list to be able to release them upon
dmaengine_terminate_all().
Signed-off-by: NPer Forlin <per.forlin@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The client list may exist in two lists at the same time. This makes free
fail since the same desc is freed multiple times. Remove desc from
client list when adding it to the pending queue. Move free of client owned
descriptors from free_dma() to terminate_all().

Unable to handle kernel paging request at virtual address 00100104
pgd = dea8c000
[00100104] *pgd=1ea62831, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#1] PREEMPT SMP
Modules linked in:
CPU: 0    Not tainted  (3.1.0-rc3+ #58)
PC is at d40_free_chan_resources+0x64/0x330
Signed-off-by: NPer Forlin <per.forlin@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

d40_desc_free() already calls d40_pool_lli_free().
Signed-off-by: NPer Forlin <per.forlin@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Signed-off-by: NPer Forlin <per.forlin@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Fixed trivial conflicts  in  drivers/dma/amba-pl08x.c
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

The firmware blob may not be available when the driver
probes. Instead of blocking the whole kernel use
request_firmware_nowait() and continue without firmware.
The ROM scripts can already be used then if available.
For the devicetree case the ROM scripts are not available,
still the probe function should not block. The driver
will be unusable in this case, but we have no way of
detecting this properly. The configuration of the dma
channels will fail, so nothing bad should happen.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

If we do not have a firmare script for a given transfer,
the setup of this channel must fail. For this the script
addresses have to be < 0 initially, not 0.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

channel0 of the sdma engine is the configuration channel. It
is a shared resource and thus must be protected by a mutex.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Making dmatest threads freezable allows its use for system PM testing.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ARM: mach-shmobile: sh7372 LCDC1 suspend fix V2 (incremental)
  OMAP: omap_device: only override _noirq methods, not normal suspend/resume
  PM / Runtime: Correct documentation of pm_runtime_irq_safe()
  ARM: mach-shmobile: sh7372 LCDC1 suspend fix
  sh-sci / PM: Use power.irq_safe
  PM: Use spinlock instead of mutex in clock management functions

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: sbp2: fix panic after rmmod with slow targets

This patch updates the recently submitted
"Associate the HDMI clock together with LCDC1 on sh7372"
to V2 with the following change:
 - Use lcdc1_device on AP4EVB to build properly.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

The nfsservctl system call is now gone, so we should remove all
linkage for it.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>