If NO_DMA=y:

    ERROR: "bad_dma_ops" [drivers/crypto/atmel-tdes.ko] undefined!
    ERROR: "bad_dma_ops" [drivers/crypto/atmel-sha.ko] undefined!

Add dependencies on HAS_DMA to fix this.

Fixes: ceb4afb3 ("crypto: atmel - refine Kconfig dependencies")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The exit path when curr->head cannot be allocated fails to kfree the
earlier allocated curr.  Fix this by kfree'ing it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix the following smatch errors
cptvf_reqmanager.c:333 do_post_process() warn: variable dereferenced
before check 'cptvf'
cptvf_main.c:825 cptvf_remove() error: we previously assumed 'cptvf'
could be null
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGeorge Cherian <george.cherian@cavium.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

pci_enable_msix has been long deprecated, but this driver adds a new
instance.  Convert it to pci_alloc_irq_vectors and greatly simplify
the code, and make sure the prope code properly unwinds.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

pci_enable_msix has been long deprecated, but this driver adds a new
instance.  Convert it to pci_alloc_irq_vectors and greatly simplify
the code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In Broadcom SPU driver, in case where incremental hash
is done in software in ahash_finup(), tmpbuf was freed
twice.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NRob Rice <rob.rice@broadcom.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The driver fails to build if MSI support is disabled:

In file included from /git/arm-soc/drivers/crypto/cavium/cpt/cptpf_main.c:18:0:
drivers/crypto/cavium/cpt/cptpf.h:57:20: error: array type has incomplete element type 'struct msix_entry'
  struct msix_entry msix_entries[CPT_PF_MSIX_VECTORS];
                    ^~~~~~~~~~~~
drivers/crypto/cavium/cpt/cptpf_main.c: In function 'cpt_enable_msix':
drivers/crypto/cavium/cpt/cptpf_main.c:344:8: error: implicit declaration of function 'pci_enable_msix';did you mean 'cpt_enable_msix'? [-Werror=implicit-function-declaration]

On the other hand, it doesn't seem to have any build dependency on ARCH_THUNDER,
so let's allow compile-testing to catch this kind of problem more easily.
The 64-bit dependency is needed for the use of readq/writeq.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

cpt_bind_vq_to_grp() could return an error code. However, it currently
returns a u8. This produce the static checker warning.

drivers/crypto/cavium/cpt/cptpf_mbox.c:70 cpt_bind_vq_to_grp() warn: signedness bug returning '(-22)'
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGeorge Cherian <george.cherian@cavium.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

omap-rng also supports Marvell Armada 7k/8k SoCs, but no mention of this
is made in the help text, despite the dependency being added. Explicitly
mention these SoCs in the help description so people know that it covers
more than just TI SoCs.

Fixes: 38321242 ("hwrng: omap - Add device variant for SafeXcel IP-76 found in Armada 8K")
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If we register the DMA API debug notification chain to
receive platform bus events:
    dma_debug_add_bus(&platform_bus_type);
we start receiving warnings after a simple test like "modprobe caam_jr &&
modprobe caamhash && modprobe -r caamhash && modprobe -r caam_jr":
platform ffe301000.jr: DMA-API: device driver has pending DMA allocations while released from device [count=1938]
One of leaked entries details: [device address=0x0000000173fda090] [size=63 bytes] [mapped with DMA_TO_DEVICE] [mapped as single]

It turns out there are several issues with handling buf_dma (mapping of buffer
holding the previous chunk smaller than hash block size):
-detection of buf_dma mapping failure occurs too late, after a job descriptor
using that value has been submitted for execution
-dma mapping leak - unmapping is not performed in all places: for e.g.
in ahash_export or in most ahash_fin* callbacks (due to current back-to-back
implementation of buf_dma unmapping/mapping)

Fix these by:
-calling dma_mapping_error() on buf_dma right after the mapping and providing
an error code if needed
-unmapping buf_dma during the "job done" (ahash_done_*) callbacks
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

caamhash uses double buffering for holding previous/current
and next chunks (data smaller than block size) to be hashed.

Add (inline) functions to abstract this mechanism.
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In case ctx_dma dma mapping fails, ahash_unmap_ctx() tries to
dma unmap an invalid address:
map_seq_out_ptr_ctx() / ctx_map_to_sec4_sg() -> goto unmap_ctx ->
-> ahash_unmap_ctx() -> dma unmap ctx_dma

There is also possible to reach ahash_unmap_ctx() with ctx_dma
uninitialzed or to try to unmap the same address twice.

Fix these by setting ctx_dma = 0 where needed:
-initialize ctx_dma in ahash_init()
-clear ctx_dma in case of mapping error (instead of holding
the error code returned by the dma map function)
-clear ctx_dma after each unmapping

Fixes: 32686d34 ("crypto: caam - ensure that we clean up after an error")
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

setkey() callback may be invoked multiple times for the same tfm.
In this case, DMA API leaks are caused by shared descriptors
(and key for caamalg) being mapped several times and unmapped only once.
Fix this by performing mapping / unmapping only in crypto algorithm's
cra_init() / cra_exit() callbacks and sync_for_device in the setkey()
tfm callback.
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Shared descriptors for hash algorithms are small enough
for (split) keys to be inlined in all cases.
Since driver already does this, all what's left is to remove
unused ctx->key_dma.

Fixes: 045e3678 ("crypto: caam - ahash hmac support")
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

dma_map_sg() might coalesce S/G entries, so use the number of S/G
entries returned by it instead of what sg_nents_for_len() initially
returns.
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Replace internal sg_count() function and the convoluted logic
around it with the standard sg_nents_for_len() function.
src_nents, dst_nents now hold the number of SW S/G entries,
instead of the HW S/G table entries.

With this change, null (zero length) input data for AEAD case
needs to be handled in a visible way. req->src is no longer
(un)mapped, pointer address is set to 0 in SEQ IN PTR command.
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

sg_count() internally calls sg_nents_for_len(), which could fail
in case the required number of bytes is larger than the total
bytes in the S/G.

Thus, add checks to validate the input.
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

HW S/G generation does not work properly when the following conditions
are met:
-src == dst
-src/dst is S/G
-IV is right before (contiguous with) the first src/dst S/G entry
since "iv_contig" is set to true (iv_contig is a misnomer here and
it actually refers to the whole output being contiguous)

Fix this by setting dst S/G nents equal to src S/G nents, instead of
leaving it set to init value (0).
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If one of the JRs failed at init, the next JR used
the failed JR's IO space. The patch fixes this bug.
Signed-off-by: NTudor Ambarus <tudor-dan.ambarus@nxp.com>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Setting the dma mask could fail, thus make sure it succeeds
before going further.
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

intern.h, jr.h are not needed in error.c
error.h is not needed in ctrl.c
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The reverse-get/set functions can be simplified by
eliminating unused code.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Move the command queue tail pointer when an error is
detected. Always return the error.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The CCP initialization messages only need to be sent to
syslog in debug mode.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch clarifies and fixes how errors should be handled by
atmel_sha_start().

For update operations, the previous code wrongly assumed that
(err != -EINPROGRESS) implies (err == 0). It's wrong because that doesn't
take the error cases (err < 0) into account.

This patch also adds many comments to detail all the possible returned
values and what should be done in each case.

Especially, when an error occurs, since atmel_sha_complete() has already
been called, hence releasing the hardware, atmel_sha_start() must not call
atmel_sha_finish_req() later otherwise atmel_sha_complete() would be
called a second time.
Signed-off-by: NCyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch fixes a previous patch: "crypto: atmel-sha - update request
queue management to make it more generic".

Indeed the patch above should have replaced the "return -EINVAL;" lines by
"return atmel_sha_complete(dd, -EINVAL);" but instead replaced them by a
simple call of "atmel_sha_complete(dd, -EINVAL);".
Hence all "return" instructions were missing.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NCyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Ensure that the size field is correctly populated for
all AES modes.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add Broadcom Secure Processing Unit (SPU) crypto driver for SPU
hardware crypto offload. The driver supports ablkcipher, ahash,
and aead symmetric crypto operations.
Signed-off-by: NSteve Lin <steven.lin1@broadcom.com>
Signed-off-by: NRob Rice <rob.rice@broadcom.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add the CPT options in crypto Kconfig and update the
crypto Makefile

Update the MAINTAINERS file too.
Signed-off-by: NGeorge Cherian <george.cherian@cavium.com>
Reviewed-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Enable the CPT VF driver. CPT is the cryptographic Acceleration Unit
in Octeon-tx series of processors.
Signed-off-by: NGeorge Cherian <george.cherian@cavium.com>
Reviewed-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Enable the Physical Function driver for the Cavium Crypto Engine (CPT)
found in Octeon-tx series of SoC's. CPT is the Cryptographic Accelaration
Unit. CPT includes microcoded GigaCypher symmetric engines (SEs) and
asymmetric engines (AEs).
Signed-off-by: NGeorge Cherian <george.cherian@cavium.com>
Reviewed-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Systems containing the Cavium HW RNG may have one device per NUMA
node.  A typical configuration is a 2-node NUMA system, which results
in 2 RNG devices.  The hwrng subsystem refuses (and rightly so) to
register more than one device with he same name, so we get failure
messages on these systems.

Make the hwrng name unique by including the underlying device name.
Also remove spaces from the name to make it possible to switch devices
via the sysfs knobs.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When we enable COMPILE_TEST building for the Atmel sha and tdes implementations,
we run into a couple of warnings about incorrect format strings, e.g.

In file included from include/linux/platform_device.h:14:0,
                 from drivers/crypto/atmel-sha.c:24:
drivers/crypto/atmel-sha.c: In function 'atmel_sha_xmit_cpu':
drivers/crypto/atmel-sha.c:571:19: error: format '%d' expects argument of type 'int', but argument 6 has type 'size_t {aka long unsigned int}' [-Werror=format=]
In file included from include/linux/printk.h:6:0,
                 from include/linux/kernel.h:13,
                 from drivers/crypto/atmel-tdes.c:17:
drivers/crypto/atmel-tdes.c: In function 'atmel_tdes_crypt_dma_stop':
include/linux/kern_levels.h:4:18: error: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'size_t {aka long unsigned int}' [-Werror=format=]

These are all fixed by using the "%z" modifier for size_t data.

There are also a few uses of min()/max() with incompatible types:

drivers/crypto/atmel-tdes.c: In function 'atmel_tdes_crypt_start':
drivers/crypto/atmel-tdes.c:528:181: error: comparison of distinct pointer types lacks a cast [-Werror]

Where possible, we should use consistent types here, otherwise we can use
min_t()/max_t() to get well-defined behavior without a warning.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

With the new authenc support, we get a harmless Kconfig warning:

warning: (CRYPTO_DEV_ATMEL_AUTHENC) selects CRYPTO_DEV_ATMEL_SHA which has unmet direct dependencies (CRYPTO && CRYPTO_HW && ARCH_AT91)

The problem is that each of the options has slightly different dependencies,
although they all seem to want the same thing: allow building for real AT91
targets that actually have the hardware, and possibly for compile testing.

This makes all four options consistent: instead of depending on a particular
dmaengine implementation, we depend on the ARM platform, CONFIG_COMPILE_TEST
as an alternative when that is turned off. This makes the 'select' statements
work correctly.

Fixes: 89a82ef8 ("crypto: atmel-authenc - add support to authenc(hmac(shaX), Y(aes)) modes")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Initialise variable after null check.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NHarsh Jain <harsh@chelsio.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Typecast the pointer with correct structure.
Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Update priorities to 3000
Signed-off-by: NHarsh Jain <harsh@chelsio.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Change cipher algos flags to CRYPTO_ALG_TYPE_ABLKCIPHER.
Signed-off-by: NHarsh Jain <harsh@chelsio.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

1 Block of encrption can be done with aes-generic. no need of
cbc(aes). This patch replaces cbc(aes-generic) with aes-generic.
Signed-off-by: NHarsh Jain <harsh@chelsio.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>