This is a left over from radeon, amdgpu doesn't support any
non-atombios parts and amdgpu_device_init would bail if the
check for atombios failed anyway.
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: NNils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support wider address spaces, make it 32-bit so we don't have to
revisit this for a while.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Change History
--------------

v4: Changes suggested by Emil, Christian
- return -ENODATA for asics with unlimited sessions

v3: changes suggested by Christian
- Add a check for UVD IP block using AMDGPU_HW_IP_UVD
  query type.
- Add a check for asic_type to be less than
  CHIP_POLARIS10 since starting Polaris, we support
  unlimited UVD instances.
- Add kerneldoc style comment for
  amdgpu_uvd_used_handles().

v2: as suggested by Christian
- Add a new query AMDGPU_INFO_NUM_HANDLES
- Create a helper function to return the number
  of currently used UVD handles.
- Modify the logic to count the number of used
  UVD handles since handles can be freed in
  non-linear fashion.

v1:
- User might want to query the maximum number of UVD
  instances supported by firmware. In addition to that,
  if there are multiple applications using UVD handles
  at the same time, he might also want to query the
  currently used number of handles.

  For this we add two variables max_handles and
  used_handles inside drm_amdgpu_info_hw_ip. So now
  an application (or libdrm) can use AMDGPU_INFO IOCTL
  with AMDGPU_INFO_HW_IP_INFO query type to get these
  values.
Signed-off-by: NArindam Nath <arindam.nath@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Where possible replace numeric constants in the table
with their register names.

Compile tested + executed on a Tahiti.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/sti/sti_plane.c:76:33: error: ‘struct drm_framebuffer’
has no member named ‘pixel_format’; did you mean ‘format’?

I didn't look to hard at the casting to a char * and just did a
mechanical transformation of s/pixel_format/format->format/ as given in
commit 438b74a5 ("drm: Nuke fb->pixel_format").

Fixes: 438b74a5 ("drm: Nuke fb->pixel_format")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Acked-by: NVincent Abriou <vincent.abriou@st.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- cleanups&fixes for dw-hdmi bride driver (Laurent)
- updates for adv bridge driver (John Stultz) for nexus
- drm_crtc_from_index helper rollout (Shawn Guo)
- removing drm_framebuffer_unregister_private from drivers&core
- target_vblank (Andrey Grodzovsky)
- misc tiny stuff

* tag 'drm-misc-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc: (49 commits)
  drm: qxl: Open code teardown function for qxl
  drm: qxl: Open code probing sequence for qxl
  drm/bridge: adv7511: Re-write the i2c address before EDID probing
  drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID
  drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally
  drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection
  drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
  drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context
  drm: vc4: use crtc helper drm_crtc_from_index()
  drm: tegra: use crtc helper drm_crtc_from_index()
  drm: nouveau: use crtc helper drm_crtc_from_index()
  drm: mediatek: use crtc helper drm_crtc_from_index()
  drm: kirin: use crtc helper drm_crtc_from_index()
  drm: exynos: use crtc helper drm_crtc_from_index()
  dt-bindings: display: dw-hdmi: Clean up DT bindings documentation
  drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY
  drm: bridge: dw-hdmi: Fix the name of the PHY reset macros
  drm: bridge: dw-hdmi: Define and use macros for PHY register addresses
  drm: bridge: dw-hdmi: Detect PHY type at runtime
  drm: bridge: dw-hdmi: Handle overflow workaround based on device version
  ...

Final block of feature work for 4.11:

- gen8 pd cleanup from Matthew Auld
- more cleanups for view/vma (Chris)
- dmc support on glk (Anusha Srivatsa)
- use core crc api (Tomue)
- track wedged requests using fence.error (Chris)
- lots of psr fixes (Nagaraju, Vathsala)
- dp mst support, acked for merging through drm-intel by Takashi
  (Libin)
- huc loading support, including uapi for libva to use it (Anusha
  Srivatsa)

* tag 'drm-intel-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-intel: (111 commits)
  drm/i915: Update DRIVER_DATE to 20170123
  drm/i915: reinstate call to trace_i915_vma_bind
  drm/i915: Assert that created vma has a whole number of pages
  drm/i915: Assert the drm_mm_node is allocated when on the VM lists
  drm/i915: Treat an error from i915_vma_instance() as unlikely
  drm/i915: Reject vma creation larger than address space
  drm/i915: Use common LRU inactive vma bumping for unpin_from_display
  drm/i915: Do an unlocked wait before set-cache-level ioctl
  drm/i915/huc: Assert that HuC vma is placed in GuC accessible range
  drm/i915/huc: Avoid attempting to authenticate non-existent fw
  drm/i915: Set adjustment to zero on Up/Down interrupts if freq is already max/min
  drm/i915: Remove the double handling of 'flags from intel_mode_from_pipe_config()
  drm/i915: Remove crtc->config usage from intel_modeset_readout_hw_state()
  drm/i915: Release temporary load-detect state upon switching
  drm/i915: Remove i915_gem_object_to_ggtt()
  drm/i915: Remove i915_vma_create from VMA API
  drm/i915: Add a check that the VMA instance we lookup matches the request
  drm/i915: Rename some warts in the VMA API
  drm/i915: Track pinned vma in intel_plane_state
  drm/i915/get_params: Add HuC status to getparams
  ...

This reverts commit 54a07c7b,
and reinstates the original.

[airlied: this might be a bad plan for git].

commit 3846fd9b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Jan 11 10:01:17 2017 +0100

    drm/probe-helpers: Drop locking from poll_enable

    It was only needed to protect the connector_list walking, see

    commit 8c4ccc4a
    Author: Daniel Vetter <daniel.vetter@ffwll.ch>
    Date:   Thu Jul 9 23:44:26 2015 +0200

        drm/probe-helper: Grab mode_config.mutex in poll_init/enable

    Unfortunately the commit message of that patch fails to mention that
    the new locking check was for the connector_list.

    But that requirement disappeared in

    commit c36a3254
    Author: Daniel Vetter <daniel.vetter@ffwll.ch>
    Date:   Thu Dec 15 16:58:43 2016 +0100

        drm: Convert all helpers to drm_connector_list_iter

    and so we can drop this again.

    This fixes a locking inversion on nouveau, where the rpm code needs to
    re-enable. But in other places the rpm_get() calls are nested within
    the big modeset locks.

    While at it, also improve the kerneldoc for these two functions a
    notch.

    v2: Update the kerneldoc even more to explain that these functions
    can't be called concurrently, or bad things happen (Chris).

Backmerge Linus master to get the connector locking revert.

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: (645 commits)
  sysctl: fix proc_doulongvec_ms_jiffies_minmax()
  Revert "drm/probe-helpers: Drop locking from poll_enable"
  MAINTAINERS: add Dan Streetman to zbud maintainers
  MAINTAINERS: add Dan Streetman to zswap maintainers
  mm: do not export ioremap_page_range symbol for external module
  mn10300: fix build error of missing fpu_save()
  romfs: use different way to generate fsid for BLOCK or MTD
  frv: add missing atomic64 operations
  mm, page_alloc: fix premature OOM when racing with cpuset mems update
  mm, page_alloc: move cpuset seqcount checking to slowpath
  mm, page_alloc: fix fast-path race with cpuset update or removal
  mm, page_alloc: fix check for NULL preferred_zone
  kernel/panic.c: add missing \n
  fbdev: color map copying bounds checking
  frv: add atomic64_add_unless()
  mm/mempolicy.c: do not put mempolicy before using its nodemask
  radix-tree: fix private list warnings
  Documentation/filesystems/proc.txt: add VmPin
  mm, memcg: do not retry precharge charges
  proc: add a schedule point in proc_pid_readdir()
  ...

We perform the conversion between kernel jiffies and ms only when
exporting kernel value to user space.

We need to do the opposite operation when value is written by user.

Only matters when HZ != 1000
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull pin control fixes from Linus Walleij:
 "A bunch of pin control fixes for v4.10 that didn't get sent off until
  now, sorry for the delay.

  It's only driver fixes:

   - A bunch of fixes to the Intel drivers: broxton, baytrail. Bugs
     related to register offsets, IRQ, debounce functionality.

   - Fix a conflict amongst UART settings on the meson.

   - Fix the ethernet setting on the Uniphier.

   - A compilation warning squelched"

* tag 'pinctrl-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: uniphier: fix Ethernet (RMII) pin-mux setting for LD20
  pinctrl: meson: fix uart_ao_b for GXBB and GXL/GXM
  pinctrl: amd: avoid maybe-uninitalized warning
  pinctrl: baytrail: Do not add all GPIOs to IRQ domain
  pinctrl: baytrail: Rectify debounce support
  pinctrl: intel: Set pin direction properly
  pinctrl: broxton: Use correct PADCFGLOCK offset

Pull drm revert from Dave Airlie:
 "Revert one patch missing some prereqs.

  One of the connector fixes was missing some prereqs, we have an
  alternate driver fix that should work that I'll send tomorrow.

  Today is a holiday here so quickly smashing this out"

Daniel Vetter explains:
 "I pushed a locking change to fix a nouveau rpm issue to -fixes that
  needed the connector_list rework. And that's only in -next, but I
  missed that. Dave has the revert in a pull, and he'll follow-up with
  the hack nouveau patch for 4.10, and then we'll reapply the proper fix
  again for -next and revert the hacks. A bit a mess, but should be
  sorted soon"

* tag 'drm-fixes-for-v4.10-rc6-revert-one' of git://people.freedesktop.org/~airlied/linux:
  Revert "drm/probe-helpers: Drop locking from poll_enable"

This reverts commit 3846fd9b.

There were some precursor commits missing for this around connector
locking, we should probably merge Lyude's nouveau avoid the problem patch.

Pull virtio/vhost fixes from Michael Tsirkin:

 - ARM DMA fixes

 - vhost vsock bugfix

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vring: Force use of DMA API for ARM-based systems with legacy devices
  virtio_mmio: Set DMA masks appropriately
  vhost/vsock: handle vhost_vq_init_access() error

Merge fixes from Andrew Morton:
 "26 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits)
  MAINTAINERS: add Dan Streetman to zbud maintainers
  MAINTAINERS: add Dan Streetman to zswap maintainers
  mm: do not export ioremap_page_range symbol for external module
  mn10300: fix build error of missing fpu_save()
  romfs: use different way to generate fsid for BLOCK or MTD
  frv: add missing atomic64 operations
  mm, page_alloc: fix premature OOM when racing with cpuset mems update
  mm, page_alloc: move cpuset seqcount checking to slowpath
  mm, page_alloc: fix fast-path race with cpuset update or removal
  mm, page_alloc: fix check for NULL preferred_zone
  kernel/panic.c: add missing \n
  fbdev: color map copying bounds checking
  frv: add atomic64_add_unless()
  mm/mempolicy.c: do not put mempolicy before using its nodemask
  radix-tree: fix private list warnings
  Documentation/filesystems/proc.txt: add VmPin
  mm, memcg: do not retry precharge charges
  proc: add a schedule point in proc_pid_readdir()
  mm: alloc_contig: re-allow CMA to compact FS pages
  mm/slub.c: trace free objects at KERN_INFO
  ...

Add myself as zbud maintainer.

Link: http://lkml.kernel.org/r/20170124221705.26523-1-ddstreet@ieee.orgSigned-off-by: NDan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add myself as zswap maintainer.

Link: http://lkml.kernel.org/r/20170124212200.19052-1-ddstreet@ieee.orgSigned-off-by: NDan Streetman <ddstreet@ieee.org>
Acked-by: NSeth Jennings <sjenning@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recently, I've found cases in which ioremap_page_range was used
incorrectly, in external modules, leading to crashes.  This can be
partly attributed to the fact that ioremap_page_range is lower-level,
with fewer protections, as compared to the other functions that an
external module would typically call.  Those include:

     ioremap_cache
     ioremap_nocache
     ioremap_prot
     ioremap_uc
     ioremap_wc
     ioremap_wt

...each of which wraps __ioremap_caller, which in turn provides a safer
way to achieve the mapping.

Therefore, stop EXPORT-ing ioremap_page_range.

Link: http://lkml.kernel.org/r/1485173220-29010-1-git-send-email-zhongjiang@huawei.comSigned-off-by: Nzhong jiang <zhongjiang@huawei.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Suggested-by: NJohn Hubbard <jhubbard@nvidia.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When CONFIG_FPU is not enabled on arch/mn10300, <asm/switch_to.h> causes
a build error with a call to fpu_save():

  kernel/built-in.o: In function `.L410':
  core.c:(.sched.text+0x28a): undefined reference to `fpu_save'

Fix this by including <asm/fpu.h> in <asm/switch_to.h> so that an empty
static inline fpu_save() is defined.

Link: http://lkml.kernel.org/r/dc421c4f-4842-4429-1b99-92865c2f24b6@infradead.orgSigned-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Reviewed-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 8a59f5d2 ("fs/romfs: return f_fsid for statfs(2)") generates
a 64bit id from sb->s_bdev->bd_dev.  This is only correct when romfs is
defined with CONFIG_ROMFS_ON_BLOCK.  If romfs is only defined with
CONFIG_ROMFS_ON_MTD, sb->s_bdev is NULL, referencing sb->s_bdev->bd_dev
will triger an oops.

Richard Weinberger points out that when CONFIG_ROMFS_BACKED_BY_BOTH=y,
both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD are defined.
Therefore when calling huge_encode_dev() to generate a 64bit id, I use
the follow order to choose parameter,

- CONFIG_ROMFS_ON_BLOCK defined
  use sb->s_bdev->bd_dev
- CONFIG_ROMFS_ON_BLOCK undefined and CONFIG_ROMFS_ON_MTD defined
  use sb->s_dev when,
- both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD undefined
  leave id as 0

When CONFIG_ROMFS_ON_MTD is defined and sb->s_mtd is not NULL, sb->s_dev
is set to a device ID generated by MTD_BLOCK_MAJOR and mtd index,
otherwise sb->s_dev is 0.

This is a try-best effort to generate a uniq file system ID, if all the
above conditions are not meet, f_fsid of this romfs instance will be 0.
Generally only one romfs can be built on single MTD block device, this
method is enough to identify multiple romfs instances in a computer.

Link: http://lkml.kernel.org/r/1482928596-115155-1-git-send-email-colyli@suse.deSigned-off-by: NColy Li <colyli@suse.de>
Reported-by: NNong Li <nongli1031@gmail.com>
Tested-by: NNong Li <nongli1031@gmail.com>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some more atomic64 operations were missing and as a result frv
allmodconfig was failing.  Add the missing operations.

Link: http://lkml.kernel.org/r/1485193844-12850-1-git-send-email-sudip.mukherjee@codethink.co.ukSigned-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Ganapatrao Kulkarni reported that the LTP test cpuset01 in stress mode
triggers OOM killer in few seconds, despite lots of free memory.  The
test attempts to repeatedly fault in memory in one process in a cpuset,
while changing allowed nodes of the cpuset between 0 and 1 in another
process.

The problem comes from insufficient protection against cpuset changes,
which can cause get_page_from_freelist() to consider all zones as
non-eligible due to nodemask and/or current->mems_allowed.  This was
masked in the past by sufficient retries, but since commit 682a3385
("mm, page_alloc: inline the fast path of the zonelist iterator") we fix
the preferred_zoneref once, and don't iterate over the whole zonelist in
further attempts, thus the only eligible zones might be placed in the
zonelist before our starting point and we always miss them.

A previous patch fixed this problem for current->mems_allowed.  However,
cpuset changes also update the task's mempolicy nodemask.  The fix has
two parts.  We have to repeat the preferred_zoneref search when we
detect cpuset update by way of seqcount, and we have to check the
seqcount before considering OOM.

[akpm@linux-foundation.org: fix typo in comment]
Link: http://lkml.kernel.org/r/20170120103843.24587-5-vbabka@suse.cz
Fixes: c33d6c06 ("mm, page_alloc: avoid looking up the first zone in a zonelist twice")
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reported-by: NGanapatrao Kulkarni <gpkulkarni@gmail.com>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a preparation for the following patch to make review simpler.
While the primary motivation is a bug fix, this also simplifies the fast
path, although the moved code is only enabled when cpusets are in use.

Link: http://lkml.kernel.org/r/20170120103843.24587-4-vbabka@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: Ganapatrao Kulkarni <gpkulkarni@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Ganapatrao Kulkarni reported that the LTP test cpuset01 in stress mode
triggers OOM killer in few seconds, despite lots of free memory.  The
test attempts to repeatedly fault in memory in one process in a cpuset,
while changing allowed nodes of the cpuset between 0 and 1 in another
process.

One possible cause is that in the fast path we find the preferred
zoneref according to current mems_allowed, so that it points to the
middle of the zonelist, skipping e.g.  zones of node 1 completely.  If
the mems_allowed is updated to contain only node 1, we never reach it in
the zonelist, and trigger OOM before checking the cpuset_mems_cookie.

This patch fixes the particular case by redoing the preferred zoneref
search if we switch back to the original nodemask.  The condition is
also slightly changed so that when the last non-root cpuset is removed,
we don't miss it.

Note that this is not a full fix, and more patches will follow.

Link: http://lkml.kernel.org/r/20170120103843.24587-3-vbabka@suse.cz
Fixes: 682a3385 ("mm, page_alloc: inline the fast path of the zonelist iterator")
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reported-by: NGanapatrao Kulkarni <gpkulkarni@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "fix premature OOM regression in 4.7+ due to cpuset races".

This is v2 of my attempt to fix the recent report based on LTP cpuset
stress test [1].  The intention is to go to stable 4.9 LTSS with this,
as triggering repeated OOMs is not nice.  That's why the patches try to
be not too intrusive.

Unfortunately why investigating I found that modifying the testcase to
use per-VMA policies instead of per-task policies will bring the OOM's
back, but that seems to be much older and harder to fix problem.  I have
posted a RFC [2] but I believe that fixing the recent regressions has a
higher priority.

Longer-term we might try to think how to fix the cpuset mess in a better
and less error prone way.  I was for example very surprised to learn,
that cpuset updates change not only task->mems_allowed, but also
nodemask of mempolicies.  Until now I expected the parameter to
alloc_pages_nodemask() to be stable.  I wonder why do we then treat
cpusets specially in get_page_from_freelist() and distinguish HARDWALL
etc, when there's unconditional intersection between mempolicy and
cpuset.  I would expect the nodemask adjustment for saving overhead in
g_p_f(), but that clearly doesn't happen in the current form.  So we
have both crazy complexity and overhead, AFAICS.

[1] https://lkml.kernel.org/r/CAFpQJXUq-JuEP=QPidy4p_=FN0rkH5Z-kfB4qBvsf6jMS87Edg@mail.gmail.com
[2] https://lkml.kernel.org/r/7c459f26-13a6-a817-e508-b65b903a8378@suse.cz

This patch (of 4):

Since commit c33d6c06 ("mm, page_alloc: avoid looking up the first
zone in a zonelist twice") we have a wrong check for NULL preferred_zone,
which can theoretically happen due to concurrent cpuset modification.  We
check the zoneref pointer which is never NULL and we should check the zone
pointer.  Also document this in first_zones_zonelist() comment per Michal
Hocko.

Fixes: c33d6c06 ("mm, page_alloc: avoid looking up the first zone in a zonelist twice")
Link: http://lkml.kernel.org/r/20170120103843.24587-2-vbabka@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: Ganapatrao Kulkarni <gpkulkarni@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a system panics, the "Rebooting in X seconds.." message is never
printed because it lacks a new line.  Fix it.

Link: http://lkml.kernel.org/r/20170119114751.2724-1-jslaby@suse.czSigned-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Copying color maps to userspace doesn't check the value of to->start,
which will cause kernel heap buffer OOB read due to signedness wraps.

CVE-2016-8405

Link: http://lkml.kernel.org/r/20170105224249.GA50925@beast
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NKees Cook <keescook@chromium.org>
Reported-by: Peter Pi (@heisecode) of Trend Micro
Cc: Min Chong <mchong@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The build of frv allmodconfig was failing with the error:
lib/atomic64_test.c:209:9: error:

	implicit declaration of function 'atomic64_add_unless'

All the atomic64 operations were defined in frv, but
atomic64_add_unless() was not done.

Implement atomic64_add_unless() as done in other arches.

Link: http://lkml.kernel.org/r/1484781236-6698-1-git-send-email-sudipm.mukherjee@gmail.comSigned-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit be97a41b ("mm/mempolicy.c: merge alloc_hugepage_vma to
alloc_pages_vma") alloc_pages_vma() can potentially free a mempolicy by
mpol_cond_put() before accessing the embedded nodemask by
__alloc_pages_nodemask().  The commit log says it's so "we can use a
single exit path within the function" but that's clearly wrong.  We can
still do that when doing mpol_cond_put() after the allocation attempt.

Make sure the mempolicy is not freed prematurely, otherwise
__alloc_pages_nodemask() can end up using a bogus nodemask, which could
lead e.g.  to premature OOM.

Fixes: be97a41b ("mm/mempolicy.c: merge alloc_hugepage_vma to alloc_pages_vma")
Link: http://lkml.kernel.org/r/20170118141124.8345-1-vbabka@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>	[4.0+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The newly introduced warning in radix_tree_free_nodes() was testing the
wrong variable; it should have been 'old' instead of 'node'.

Fixes: ea07b862 ("mm: workingset: fix use-after-free in shadow node shrinker")
Link: http://lkml.kernel.org/r/20170118163746.GA32495@cmpxchg.orgSigned-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit bc3e53f6 ("mm: distinguish between mlocked and pinned pages")
added VmPin in /proc/<pid>/status.  Report that in
Documentation/filesystems/proc.txt

Also move Umask after Name to keep correct order.

Link: http://lkml.kernel.org/r/20170114201219.30387-1-fabf@skynet.beSigned-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When memory.move_charge_at_immigrate is enabled and precharges are
depleted during move, mem_cgroup_move_charge_pte_range() will attempt to
increase the size of the precharge.

Prevent precharges from ever looping by setting __GFP_NORETRY.  This was
probably the intention of the GFP_KERNEL & ~__GFP_NORETRY, which is
pointless as written.

Fixes: 0029e19e ("mm: memcontrol: remove explicit OOM parameter in charge path")
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1701130208510.69402@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have seen proc_pid_readdir() invocations holding cpu for more than 50
ms.  Add a cond_resched() to be gentle with other tasks.

[akpm@linux-foundation.org: coding style fix]
Link: http://lkml.kernel.org/r/1484238380.15816.42.camel@edumazet-glaptop3.roam.corp.google.comSigned-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 73e64c51 ("mm, compaction: allow compaction for GFP_NOFS
requests") changed compation to skip FS pages if not explicitly allowed
to touch them, but missed to update the CMA compact_control.

This leads to a very high isolation failure rate, crippling performance
of CMA even on a lightly loaded system.  Re-allow CMA to compact FS
pages by setting the correct GFP flags, restoring CMA behavior and
performance to the kernel 4.9 level.

Fixes: 73e64c51 (mm, compaction: allow compaction for GFP_NOFS requests)
Link: http://lkml.kernel.org/r/20170113115155.24335-1-l.stach@pengutronix.deSigned-off-by: NLucas Stach <l.stach@pengutronix.de>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently when trace is enabled (e.g.  slub_debug=T,kmalloc-128 ) the
trace messages are mostly output at KERN_INFO.  However the trace code
also calls print_section() to hexdump the head of a free object.  This
is hard coded to use KERN_ERR, meaning the console is deluged with trace
messages even if we've asked for quiet.

Fix this the obvious way but adding a level parameter to
print_section(), allowing calls from the trace code to use the same
trace level as other trace messages.

Link: http://lkml.kernel.org/r/20170113154850.518-1-daniel.thompson@linaro.orgSigned-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
Acked-by: NChristoph Lameter <cl@linux.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With >=32 CPUs the userfaultfd selftest triggered a graceful but
unexpected SIGBUS because VM_FAULT_RETRY was returned by
handle_userfault() despite the UFFDIO_COPY wasn't completed.

This seems caused by rwsem waking the thread blocked in
handle_userfault() and we can't run up_read() before the wait_event
sequence is complete.

Keeping the wait_even sequence identical to the first one, would require
running userfaultfd_must_wait() again to know if the loop should be
repeated, and it would also require retaking the rwsem and revalidating
the whole vma status.

It seems simpler to wait the targeted wakeup so that if false wakeups
materialize we still wait for our specific wakeup event, unless of
course there are signals or the uffd was released.

Debug code collecting the stack trace of the wakeup showed this:

  $ ./userfaultfd 100 99999
  nr_pages: 25600, nr_pages_per_cpu: 800
  bounces: 99998, mode: racing ver poll, userfaults: 32 35 90 232 30 138 69 82 34 30 139 40 40 31 20 19 43 13 15 28 27 38 21 43 56 22 1 17 31 8 4 2
  bounces: 99997, mode: rnd ver poll, Bus error (core dumped)

    save_stack_trace+0x2b/0x50
    try_to_wake_up+0x2a6/0x580
    wake_up_q+0x32/0x70
    rwsem_wake+0xe0/0x120
    call_rwsem_wake+0x1b/0x30
    up_write+0x3b/0x40
    vm_mmap_pgoff+0x9c/0xc0
    SyS_mmap_pgoff+0x1a9/0x240
    SyS_mmap+0x22/0x30
    entry_SYSCALL_64_fastpath+0x1f/0xbd
    0xffffffffffffffff
    FAULT_FLAG_ALLOW_RETRY missing 70
  CPU: 24 PID: 1054 Comm: userfaultfd Tainted: G        W       4.8.0+ #30
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
  Call Trace:
    dump_stack+0xb8/0x112
    handle_userfault+0x572/0x650
    handle_mm_fault+0x12cb/0x1520
    __do_page_fault+0x175/0x500
    trace_do_page_fault+0x61/0x270
    do_async_page_fault+0x19/0x90
    async_page_fault+0x25/0x30

This always happens when the main userfault selftest thread is running
clone() while glibc runs either mprotect or mmap (both taking mmap_sem
down_write()) to allocate the thread stack of the background threads,
while locking/userfault threads already run at full throttle and are
susceptible to false wakeups that may cause handle_userfault() to return
before than expected (which results in graceful SIGBUS at the next
attempt).

This was reproduced only with >=32 CPUs because the loop to start the
thread where clone() is too quick with fewer CPUs, while with 32 CPUs
there's already significant activity on ~32 locking and userfault
threads when the last background threads are started with clone().

This >=32 CPUs SMP race condition is likely reproducible only with the
selftest because of the much heavier userfault load it generates if
compared to real apps.

We'll have to allow "one more" VM_FAULT_RETRY for the WP support and a
patch floating around that provides it also hidden this problem but in
reality only is successfully at hiding the problem.

False wakeups could still happen again the second time
handle_userfault() is invoked, even if it's a so rare race condition
that getting false wakeups twice in a row is impossible to reproduce.
This full fix is needed for correctness, the only alternative would be
to allow VM_FAULT_RETRY to be returned infinitely.  With this fix the WP
support can stick to a strict "one more" VM_FAULT_RETRY logic (no need
of returning it infinite times to avoid the SIGBUS).

Link: http://lkml.kernel.org/r/20170111005535.13832-2-aarcange@redhat.comSigned-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reported-by: NShubham Kumar Sharma <shubham.kumar.sharma@oracle.com>
Tested-by: NMike Kravetz <mike.kravetz@oracle.com>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

gcc-7 produces a harmless false-postive warning about a possible NULL
pointer access:

  drivers/memstick/core/memstick.c: In function 'h_memstick_read_dev_id':
  drivers/memstick/core/memstick.c:309:3: error: argument 2 null where non-null expected [-Werror=nonnull]
     memcpy(mrq->data, buf, mrq->data_len);

This can't happen because the caller sets the command to 'MS_TPC_READ_REG',
which causes the data direction to be 'READ' and the NULL pointer not
accessed.

As a simple workaround for the warning, we can pass a pointer to the
data that we actually want to read into.  This is not needed here, but
also harmless, and lets the compiler know that the access is ok.

Link: http://lkml.kernel.org/r/20170111144143.548867-1-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On an overloaded system, it is possible that a change in the watchdog
threshold can be delayed long enough to trigger a false positive.

This can easily be achieved by having a cpu spinning indefinitely on a
task, while another cpu updates watchdog threshold.

What happens is while trying to park the watchdog threads, the hrtimers
on the other cpus trigger and reprogram themselves with the new slower
watchdog threshold.  Meanwhile, the nmi watchdog is still programmed
with the old faster threshold.

Because the one cpu is blocked, it prevents the thread parking on the
other cpus from completing, which is needed to shutdown the nmi watchdog
and reprogram it correctly.  As a result, a false positive from the nmi
watchdog is reported.

Fix this by setting a park_in_progress flag to block all lockups until
the parking is complete.

Fix provided by Ulrich Obergfell.

[akpm@linux-foundation.org: s/park_in_progress/watchdog_park_in_progress/]
Link: http://lkml.kernel.org/r/1481041033-192236-1-git-send-email-dzickus@redhat.comSigned-off-by: NDon Zickus <dzickus@redhat.com>
Reviewed-by: NAaron Tomlin <atomlin@redhat.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>