A layout can request return-on-close.  How this interacts with the
forgetful model of never sending LAYOUTRETURNS is a bit ambiguous.
We forget any layouts marked roc, and wait for them to be completely
forgotten before continuing with the close.  In addition, to compensate
for races with any inflight LAYOUTGETs, and the fact that we do not get
any layout stateid back from the server, we set the barrier to the worst
case scenario of current_seqid + number of outstanding LAYOUTGETS.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Fixes a bug where the nfs_client could be freed during callback processing.
Refactor nfs_find_client to use minorversion specific means to locate the
correct nfs_client structure.

In the NFS layer, V4.0 clients are found using the callback_ident field in the
CB_COMPOUND header.  V4.1 clients are found using the sessionID in the
CB_SEQUENCE operation which is also compared against the sessionID associated
with the back channel thread after a successful CREATE_SESSION.

Each of these methods finds the one an only nfs_client associated
with the incoming callback request - so nfs_find_client_next is not needed.

In the RPC layer, the pg_authenticate call needs to find the nfs_client. For
the v4.0 callback service, the callback identifier has not been decoded so a
search by address, version, and minorversion is used.  The sessionid for the
sessions based callback service has (usually) not been set for the
pg_authenticate on a CB_NULL call which can be sent prior to the return
of a CREATE_SESSION call, so the sessionid associated with the back channel
thread is not used to find the client in pg_authenticate for CB_NULL calls.

Pass the referenced nfs_client to each CB_COMPOUND operation being proceesed
via the new cb_process_state structure. The reference is held across
cb_compound processing.

Use the new cb_process_state struct to move the NFS4ERR_RETRY_UNCACHED_REP
processing from process_op into nfs4_callback_sequence where it belongs.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Use the small id to pointer translator service to provide a unique callback
identifier per SETCLIENTID call used to identify the v4.0 callback service
associated with the clientid.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Resetting the client minor version operations causes nfs4_destroy_callback
to fail to shutdown the NFSv4.1 callback service.

There is no reason to reset the client minorversion operations when the
nfs_client struct is being freed.

Remove the minorverion reset and rename the function.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Implement the driver's io_ops->alloc_lseg and free_lseg functions,
which integrate into the deviceid cache and calls out to
nfs4_proc_getdeviceinfo when necessary.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NDean Hildebrand <dhildebz@umich.edu>
Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com>
Signed-off-by: NMike Sager <sager@netapp.com>
Signed-off-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NRicardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In particular, server reboot will invalidate all layouts.

Note that in order to have an active layout, we must get a successful response
from the server.  To avoid adding that machinery, this patch just includes a
stub that fakes up a successful return.  Since the layout is never referenced
for io, this is not a problem.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NDean Hildebrand <dhildebz@umich.edu>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Put in the infrastructure that uses information returned from the
server at mount to select a layout driver module.

In this patch, a stub is used that always returns "no driver found".
Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: NDean Hildebrand <dhildebz@umich.edu>
Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com>
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Instead of blindly zapping the caches, attempt to revalidate them if
the server has indicated that it uses high resolution timestamps.

NFSv4 should be able to always revalidate the cache since the
protocol requires the update of the change attribute on modification of
the data.  In reality, there are servers (the Linux NFS server
for example) that do not obey this requirement and use ctime as the
basis for change attribute.  Long term, the server needs to be fixed.
At this time, and to be on the safe side, continue zapping caches if
the server indicates that it does not have a high resolution timestamp.
Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

By requsting more attributes during a readdir, we can mimic the readdir plus
operation that was in NFSv3.

To test, I ran the command `ls -lU --color=none` on directories with various
numbers of files.  Without readdir plus, I see this:

n files |    100    |   1,000   |  10,000   |  100,000  | 1,000,000
--------+-----------+-----------+-----------+-----------+----------
real    | 0m00.153s | 0m00.589s | 0m05.601s | 0m56.691s | 9m59.128s
user    | 0m00.007s | 0m00.007s | 0m00.077s | 0m00.703s | 0m06.800s
sys     | 0m00.010s | 0m00.070s | 0m00.633s | 0m06.423s | 1m10.005s
access  | 3         | 1         | 1         | 4         | 31
getattr | 2         | 1         | 1         | 1         | 1
lookup  | 104       | 1,003     | 10,003    | 100,003   | 1,000,003
readdir | 2         | 16        | 158       | 1,575     | 15,749
total   | 111       | 1,021     | 10,163    | 101,583   | 1,015,784

With readdir plus enabled, I see this:

n files |    100    |   1,000   |  10,000   |  100,000  | 1,000,000
--------+-----------+-----------+-----------+-----------+----------
real    | 0m00.115s | 0m00.206s | 0m01.079s | 0m12.521s | 2m07.528s
user    | 0m00.003s | 0m00.003s | 0m00.040s | 0m00.290s | 0m03.296s
sys     | 0m00.007s | 0m00.020s | 0m00.120s | 0m01.357s | 0m17.556s
access  | 3         | 1         | 1         | 1         | 7
getattr | 2         | 1         | 1         | 1         | 1
lookup  | 4         | 3         | 3         | 3         | 3
readdir | 6         | 62        | 630       | 6,300     | 62,993
total   | 15        | 67        | 635       | 6,305     | 63,004

Readdir plus disabled has about a 16x increase in the number of rpc calls and
is 4 - 5 times slower on large directories.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We can use vmapped pages to read more information from the network at once.
This will reduce the number of calls needed to complete a readdir.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
[trondmy: Added #include for linux/vmalloc.h> in fs/nfs/dir.c]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range
locks. Due to this, some windows applications which seem to use both flock
(share mode lock mapped as flock by Samba) and fcntl locks sequentially on
the same file, can't lock as they falsely assume the file is already locked.
The problem was reported on a setup with windows clients accessing excel files
on a Samba exported share which is originally a NFS mount from a NetApp filer.

Older NFS clients (< 2.6.12) did not see this problem as flock locks were
considered local. To support legacy flock behavior, this patch adds a mount
option "-olocal_lock=" which can take the following values:

   'none'  		- Neither flock locks nor POSIX locks are local
   'flock' 		- flock locks are local
   'posix' 		- fcntl/POSIX locks are local
   'all'		- Both flock locks and POSIX locks are local

Testing:

   - This patch was tested by using -olocal_lock option with different values
     and the NLM calls were noted from the network packet captured.

     'none'  - NLM calls were seen during both flock() and fcntl(), flock lock
   	       was granted, fcntl was denied
     'flock' - no NLM calls for flock(), NLM call was seen for fcntl(),
   	       granted
     'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl()
     'all'   - no NLM calls were seen during both flock() and fcntl()

   - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4
     reboot recovery.

Cc: Neil Brown <neilb@suse.de>
Signed-off-by: NSuresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Reported-by: NBen Greear <greearb@candelatech.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org

There is no reason to change the nfs_client state every time we allocate a
new session. Move that line into nfs4_init_client_minor_version.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Put the code that is common to both the referral and ordinary mount cases
into a common helper routine.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

All we really want is the ability to retrieve the root file handle. We no
longer need the ability to walk down the path, since that is now done in
nfs_follow_remote_path().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

NFSv4 mounts ignore the rsize and wsize mount options, and always use
the default transfer size for both.  This seems to be because all
NFSv4 mounts are now cloned, and the cloning logic doesn't copy the
rsize and wsize settings from the parent nfs_server.

I tested Fedora's 2.6.32.11-99 and it seems to have this problem as
well, so I'm guessing that .33, .32, and perhaps older kernels have
this issue as well.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Stable <stable@kernel.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Arnaud Giersch reports that NFSv4 locking is broken when we hold a
delegation since commit 8e469ebd (NFSv4:
Don't allow posix locking against servers that don't support it).

According to Arnaud, the lock succeeds the first time he opens the file
(since we cannot do a delegated open) but then fails after we start using
delegated opens.

The following patch fixes it by ensuring that locking behaviour is
governed by a per-filesystem capability flag that is initially set, but
gets cleared if the server ever returns an OPEN without the
NFS4_OPEN_RESULT_LOCKTYPE_POSIX flag being set.
Reported-by: NArnaud Giersch <arnaud.giersch@iut-bm.univ-fcomte.fr>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

renewd should be synchronously killed before we destroy the session in
nfs4_clear_minor_version
Signed-off-by: NAlexandros Batsakis <batsakis@netapp.com>
[Trond.Myklebust@netapp.com: clean up to remove 'unused function
warning when !CONFIG_NFS_V4]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The v4.1 client should take into account the desired rsize, wsize when
negotiating the max size in CREATE_SESSION. Accordingly, it should use
rsize, wsize that are smaller than the session negotiated values.
Signed-off-by: NAlexandros Batsakis <batsakis@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

As seen in <http://bugs.debian.org/549002>, nfs4_init_client() can
overrun the source string when copying the client IP address from
nfs_parsed_mount_data::client_address to nfs_client::cl_ipaddr.  Since
these are both treated as null-terminated strings elsewhere, the copy
should be done with strlcpy() not memcpy().
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Propagate the NFS 'fsc' mount option through NFS automounts of various types.

This is now required as commit:

	commit c02d7adf
	Author: Trond Myklebust <Trond.Myklebust@netapp.com>
	Date:   Mon Jun 22 15:09:14 2009 -0400

	NFSv4: Replace nfs4_path_walk() with VFS path lookup in a private namespace

uses VFS-driven automounting to reach all submounts barring the root, thus
preventing fscaching from being enabled on any submount other than the root.

This patch gets around that by propagating the NFS_OPTION_FSCACHE flag across
automounts.  If a uniquifier is supplied to a mount then this is propagated to
all automounts of that mount too.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
[Trond: Fixed up the definition of nfs_fscache_get_super_cookie for the
        case of #undef CONFIG_NFS_FSCACHE]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Keep it in the case of the legacy binary mount interface, but purge it from
the nfs_server structure.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.

This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.
Signed-off-by: NJames Morris <jmorris@namei.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Acked-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

NFS may free the server structure without ever having used the
bdi, so we either need to flag the bdi as being uninitialized or
initialize it up front. This does the latter.

This fixes a crash with mounting more than one NFS file system,
should people ever need that kind of obscure NFS functionality.
Tested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This enables us to track who does what and print info. Its main use
is catching dirty inodes on the default_backing_dev_info, so we can
fix that up.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Subject: [PATCH] nfs: remove superfluous BUG_ON()s

Remove duplicated BUG_ON()s from nfs[4]_create_server()
(we make the same checks earlier in both functions).

This takes care of the following entries from Dan's list:

fs/nfs/client.c +1078 nfs_create_server(47) warning: variable derefenced before check 'server->nfs_client'
fs/nfs/client.c +1079 nfs_create_server(48) warning: variable derefenced before check 'server->nfs_client->rpc_ops'
fs/nfs/client.c +1363 nfs4_create_server(43) warning: variable derefenced before check 'server->nfs_client'
fs/nfs/client.c +1364 nfs4_create_server(44) warning: variable derefenced before check 'server->nfs_
Reported-by: NDan Carpenter <error27@gmail.com>
Cc: corbet@lwn.net
Cc: eteo@redhat.com
Cc: Julia Lawall <julia@diku.dk>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the NFSv4 server doesn't support a POSIX attribute, the generic NFS code
needs to know that, so that it don't keep trying to poll for it.

However, by the same count, if the NFSv4 server does support that
attribute, then we should ensure that the inode metadata is appropriately
labelled as being untrusted. For instance, if we don't know the correct
value of the file's uid, we should certainly not be caching ACLs or ACCESS
results.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Commit 008f55d0 (nfs41: recover lease in
_nfs4_lookup_root) forces the state manager to always run on mount. This is
a bug in the case of NFSv4.0, which doesn't require us to send a
setclientid until we want to grab file state.

In any case, this is completely the wrong place to be doing state
management. Moving that code into nfs4_init_session...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the kernel cannot start the NFSv4 callback service during a mount
request, it returns -ENOMEM to user space, resulting in this message:

   mount.nfs4: Cannot allocate memory

Adjust nfs_alloc_client() and nfs_get_client() to pass NFSv4 callback
start-up errors back to user space so a less mysterious error message
can be displayed by the mount command.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The NFS v4.1 callback service has already been setup, and
rpc_xprt->serv points to the svc_serv structure describing it.
Invoke the xprt_setup_backchannel() initialization to pre-
allocate the necessary backchannel structures.
Signed-off-by: NRicardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[nfs41: change nfs4_put_session(nfs4_session**) to nfs4_destroy_session(nfs_session*)]
Signed-off-by: NAlexandros Batsakis <Alexandros.Batsakis@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[moved xprt_setup_backchannel from nfs4_init_session to nfs4_init_backchannel]
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Tracks the nfs_callback_info for both versions, enabling the callback
service for v4 and v4.1 to run concurrently and be stopped independently
of each other.
Signed-off-by: NRicardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

move nfs4_init_callback into nfs4_init_client_minor_version
and nfs4_destroy_callback into nfs4_clear_client_minor_version

as these need to happen also when auto-negotiating the minorversion
once the callback service for nfs41 becomes different than for nfs4.0
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[nfs41: Fix checkpatch warning]
Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[Type check arguments of nfs_callback_up]
Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[nfs41: Backchannel: Remove FIXME comment]
Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Refactor-out code to bring the callback service up and down.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

This creates the nfsv4.1 session on mount.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

At mount, nfs_alloc_client sets the cl_state NFS4CLNT_LEASE_EXPIRED bit
and nfs4_alloc_session sets the NFS4CLNT_SESSION_SETUP bit, so both bits are
set when nfs4_lookup_root calls nfs4_recover_expired_lease which schedules
the nfs4_state_manager and waits for it to complete.

Place the session setup after the clientid establishment in nfs4_state_manager
so that the session is setup right after the clientid has been established
without rescheduling the state manager.

Unlike nfsv4.0, the nfs_client struct is not ready to use until the session
has been established.  Postpone marking the nfs_client struct to NFS_CS_READY
until after a successful CREATE_SESSION call so that other threads cannot use
the client until the session is established.

If the EXCHANGE_ID call fails and the session has not been setup (the
NFS4CLNT_SESSION_SETUP bit is set), mark the client with the error and return.

If the session setup CREATE_SESSION call fails with NFS4ERR_STALE_CLIENTID
which could occur due to server reboot or network partition inbetween the
EXCHANGE_ID and CREATE_SESSION call, reset the NFS4CLNT_LEASE_EXPIRED and
NFS4CLNT_SESSION_SETUP bits and try again.

If the CREATE_SESSION call fails with other errors, mark the client with
the error and return.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

[nfs41: NFS_CS_SESSION_SETUP cl_cons_state for back channel setup]
  On session setup, the CREATE_SESSION reply races with the server back channel
  probe which needs to succeed to setup the back channel. Set a new
  cl_cons_state NFS_CS_SESSION_SETUP just prior to the CREATE_SESSION call
  and add it as a valid state to nfs_find_client so that the client back channel
  can find the nfs_client struct and won't drop the server backchannel probe.
  Use a new cl_cons_state so that NFSv4.0 back channel behaviour which only
  sets NFS_CS_READY is unchanged.
  Adjust waiting on the nfs_client_active_wq accordingly.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

[nfs41: rename NFS_CS_SESSION_SETUP to NFS_CS_SESSION_INITING]
Signed-off-by: NAndy Adamson <andros@netapp.com>
[nfs41: set NFS_CL_SESSION_INITING in alloc_session]
Signed-off-by: NAndy Adamson <andros@netapp.com>
[nfs41: move session setup into a function]
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[moved nfs4_proc_create_session declaration here]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Set the mount points rsize and wsize to the negotiated session fore channel
maximum response and requeset size. These values will be bound checked in
nfs_server_set_fsinfo.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[move nfs4_session_set_rwsize into CONFIG_NFS_V4]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>