- 07 3月, 2009 8 次提交
-
-
由 Steve Ma 提交于
When a sequence cannot be delivered to the target, the local port will schedule retries, While this process is in progress, if we destroy the FCoE interface, the fcoe_sw_destroy routine is entered, and the fc_exch_mgr_free(lp->emp) is called. Thus if fc_exch_alloc() is called when retrying the sequence, the mempool_alloc() will fail to allocate the exchange because the mempool of the exchange manager has already been released. This patch is to cancel any pending retry work of the local port before we start to destroy the interface. Also, when resetting the local port, we should also stop the scheduled pending retries. Signed-off-by: NSteve Ma <steve.ma@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Vasu Dev 提交于
The fc_fcp_complete_locked detected data underrun in this case and set the FC_DATA_UNDRUN but that was ignored by fc_io_compl for all cases including read underrun. Added code to not to ignore FC_DATA_UNDRUN for read IO and instead suggested scsi-ml to retry cmd to recover from lost data frame. Not sure if it is okay to ignore FC_DATA_UNDRUN for other case, so let code as is for other cases but removed or-ing with zero valued fsp->cdb_status for those cases. Signed-off-by: NVasu Dev <vasu.dev@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Chris Leech 提交于
This allows any rport ELS to retry on LS_RJT. The rport error handling would only retry on resource allocation failures and exchange timeouts. I have a target that will occasionally reject PLOGI when we do a quick LOGO/PLOGI. When a critical ELS was rejected, libfc would fail silently leaving the rport in a dead state. The retry count and delay are managed by fc_rport_error_retry. If the retry count is exceeded fc_rport_error will be called. When retrying is not the correct course of action, fc_rport_error can be called directly. Signed-off-by: NChris Leech <christopher.leech@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Vasu Dev 提交于
The fcoe_xmit could call fc_pause in case the pending skb queue len is larger than FCOE_MAX_QUEUE_DEPTH, the fc_pause was trying to grab lport->lp_muex to change lport->link_status and that had these issues :- 1. The fcoe_xmit was getting called with bh disabled, thus causing "BUG: scheduling while atomic" when grabbing lport->lp_muex with bh disabled. 2. fc_linkup and fc_linkdown function calls lport_enter function with lport->lp_mutex held and these enter function in turn calls fcoe_xmit to send lport related FC frame, e.g. fc_linkup => fc_lport_enter_flogi to send flogi req. In this case grabbing the same lport->lp_mutex again in fc_puase from fcoe_xmit would cause deadlock. The lport->lp_mutex was used for setting FC_PAUSE in fcoe_xmit path but FC_PAUSE bit was not used anywhere beside just setting and clear this bit in lport->link_status, instead used a separate field qfull in fc_lport to eliminate need for lport->lp_mutex to track pending queue full condition and in turn avoid above described two locking issues. Also added check for lp->qfull in fc_fcp_lport_queue_ready to trigger SCSI_MLQUEUE_HOST_BUSY when lp->qfull is set to prevent more scsi-ml cmds while lp->qfull is set. This patch eliminated FC_LINK_UP and FC_PAUSE and instead used dedicated fields in fc_lport for this, this simplified all related conditional code. Also removed fc_pause and fc_unpause functions and instead used newly added lport->qfull directly in fcoe. Signed-off-by: NVasu Dev <vasu.dev@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Vasu Dev 提交于
The fc_seq_start_next grabs ep->ex_lock but this lock was already held here, so instead called fc_seq_start_next_locked to avoid soft lockup. Signed-off-by: NVasu Dev <vasu.dev@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Vasu Dev 提交于
Cleanup exchange held due to RRQ when RRQ exch times out, in this case the ABTS is already done causing RRQ req therefore proceeding with cleanup in fc_exch_rrq_resp should be okay to restore exch resource. Signed-off-by: NVasu Dev <vasu.dev@intel.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Abhijeet Joglekar 提交于
When a rport goes away, libFC does a plogi which will reset exchanges at the rport. Clean exchanges at our end, both in transport and libFC. If transport hooks into exch_mgr_reset, it will call back into fc_exch_mgr_reset() to clean up libFC exchanges. Signed-off-by: NAbhijeet Joglekar <abjoglek@cisco.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Abhijeet Joglekar 提交于
fc_exch_mgr structure is private to fc_exch.c. To export exch_mgr_reset to transport, transport needs access to the exch manager. Change exch_mgr_reset to use lport param which is the shared structure between libFC and transport. Alternatively, fc_exch_mgr definition can be moved to libfc.h so that lport can be accessed from mp*. Signed-off-by: NAbhijeet Joglekar <abjoglek@cisco.com> Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 06 3月, 2009 1 次提交
-
-
由 Matthew Wilcox 提交于
We currently try to spin up drives connected to standby and unavailable ports. This will never succeed and wastes a lot of time. Fail quickly if the sense data reports the port is in standby or unavailable state. Reported-by: NNarayanan Rengarajan <narayanan.rengarajan@hp.com> Tested-by: NNarayanan Rengarajan <narayanan.rengarajan@hp.com> Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 04 3月, 2009 12 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Run sbc610 USB fixup code only on the appropriate platform.
-
由 Helge Bahmann 提交于
[airlied: you shall not retype patches from other trees half asleep] Signed-of-by: NDave Airlie <airlied@redhat.com>
-
由 Tony Breeds 提交于
commit a969e76a (powerpc: Correct USB support for GE Fanuc SBC610) introduced a fixup for NEC usb controllers. This fixup should only run on GEF SBC610 boards. Fixes Fedora bug #486511. (https://bugzilla.redhat.com/show_bug.cgi?id=486511) Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ixp4xx - Fix qmgr_request_queue build failure crypto: api - Fix module load deadlock with fallback algorithms
-
由 Krzysztof Hałasa 提交于
There is another user of IXP4xx queue manager, fix it. Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: don't allow setuid to succeed if the user does not have rt bandwidth sched_rt: don't start timer when rt bandwidth disabled
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: oprofile: don't set counter width from cpuid on Core2 x86: fix init_memory_mapping() to handle small ranges
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'tracing/mmiotrace' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 mmiotrace: fix race with release_kmmio_fault_page() x86 mmiotrace: improve handling of secondary faults x86 mmiotrace: split set_page_presence() x86 mmiotrace: fix save/restore page table state x86 mmiotrace: WARN_ONCE if dis/arming a page fails x86: add far read test to testmmiotrace x86: count errors in testmmiotrace.ko
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: Teach RCU that idle task is not quiscent state at boot
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] fix lots of ARM __devexit sillyness [ARM] 5417/1: Set the correct cacheid for ARMv6 CPUs with ARMv7 style MMU [ARM] 5416/1: Use unused address in v6_early_abort [ARM] 5411/1: S3C64XX: Fix EINT unmask [ARM] at91: fix for Atmel AT91 powersaving [ARM] RiscPC: Fix etherh oops
-
由 Russell King 提交于
`iop_adma_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv_xor_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv64xxx_i2c_unmap_regs' referenced in section `.devinit.text' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv64xxx_i2c_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `orion_nand_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `pxafb_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 03 3月, 2009 19 次提交
-
-
由 Catalin Marinas 提交于
The cacheid_init() function assumes that if cpu_architecture() returns 7, the caches are VIPT_NONALIASING. The cpu_architecture() function returns the version of the supported MMU features (e.g. TEX remapping) but it doesn't make any assumptions about the cache type. The patch adds the checking of the Cache Type Register for the ARMv7 format. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Seth Forshee 提交于
The target of the strex instruction to clear the exlusive monitor is currently the top of the stack. If the store succeeeds this corrupts r0 in pt_regs. Use the next stack location instead of the current one to prevent any chance of corrupting an in-use address. Signed-off-by: NSeth Forshee <seth.forshee@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Tim Blechmann 提交于
Impact: fix stuck NMIs and non-working oprofile on certain CPUs Resetting the counter width of the performance counters on Intel's Core2 CPUs, breaks the delivery of NMIs, when running in x86_64 mode. This should fix bug #12395: http://bugzilla.kernel.org/show_bug.cgi?id=12395Signed-off-by: NTim Blechmann <tim@klingt.org> Signed-off-by: NRobert Richter <robert.richter@amd.com> LKML-Reference: <20090303100412.GC10085@erda.amd.com> Cc: <stable@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Impact: fix failed EFI bootup in certain circumstances Ying Huang found init_memory_mapping() has problem with small ranges less than 2M when he tried to direct map the EFI runtime code out of max_low_pfn_mapped. It turns out we never considered that case and didn't check the range... Reported-by: NYing Huang <ying.huang@intel.com> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Cc: Brian Maly <bmaly@redhat.com> LKML-Reference: <49ACDDED.1060508@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Linus Torvalds 提交于
This reverts commit 155b25bc, which was totally wrong - the "embedded" options still exists (very much so) even on non-embedded platforms. It's just that we don't bother with actually asking about them when we're not embedded, we just take their default values (which is usually 'y' - the options add features that may not be worth it in a constrained environment). Noticed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: Fix use-before-null-check in i915_irq_emit(). drm: Avoid client deadlocks when the master disappears. drm: Wake up all lock waiters when the master disappears. drm: Don't return ERESTARTSYS to user-space.
-
由 Eric Anholt 提交于
This could be triggered by a client asking to emit an irq when the device wasn't initialized. Signed-off-by: NEric Anholt <eric@anholt.net> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Thomas Hellstrom 提交于
This is done by 1) Wake up lock waiters when we close the master file descriptor. Not when the master structure is removed, since the latter requires the waiters themselves to release the refcount on the master structure -> Deadlock. 2) Send a SIGTERM to all clients waiting for the lock. Normally these clients will get a SIGPIPE when the X server dies, but clients may also spin trying to grab the DRM lock, without getting any sort of notification. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Thomas Hellstrom 提交于
Currently only one waiter is woken up, leaving other waiters hanging waiting for the DRM lock. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Thomas Hellstrom 提交于
That return code is for in-kernel use only. Use EINTR instead. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Randy Dunlap 提交于
The COMPAT_BRK kconfig symbol does not depend on EMBEDDED, but it is in the midst of the EMBEDDED menu symbols, so it mucks up the EMBEDDED menu. Fix by moving it to just after all of the EMBEDDED menu symbols. Also, surround all of the EMBEDDED symbols with "if EMBEDDED"/"endif" so that this EMBEDDED block is clearer. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: sdhci: Add NO_BUSY_IRQ quirk for Marvell CAFE host chip sdhci: Add quirk for controllers with no end-of-busy IRQ
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add probe_mask default for Toshiba laptop with ALC268 ALSA: hda - Add quirk for new HP xw series ALSA: hda - Fix digital mic on dell-m4-1 and dell-m4-3
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: fix warning in io_mapping_map_wc() x86: i915 needs pgprot_writecombine() and is_io_mapping_possible()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) zaurus: add usb id for motomagx phones usbnet: make usbnet_get_link() fall back to ethtool_op_get_link() veth: Fix carrier detect cdc_ether: add usb id for Ericsson F3507g r8169: read MAC address from EEPROM on init (2nd attempt) tcp: fix retrans_out leaks net headers: export dcbnl.h net headers: cleanup dcbnl.h netpoll: Add drop checks to all entry points gianfar: Do right check on num_txbdfree pkt_sched: sch_drr: Fix oops in drr_change_class. b44: Disable device on shutdown b44: Unconditionally enable interrupt routing on reset net: fix hp-plus build error libertas: fix misuse of netdev_priv() and dev->ml_priv ipv6: don't use tw net when accounting for recycled tw asix: new device ids tcp_scalable: Update malformed & dead url netfilter: xt_recent: fix proc-file addition/removal of IPv4 addresses netxen: handle pci bar 0 mapping failure ...
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: selinux: Fix a panic in selinux_netlbl_inode_permission()
-
由 Karsten Keil 提交于
Since I will loose the old address soon, please change it. Signed-off-by: NKarsten Keil <kkeil@linux-pingi.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - touchpad driver miss-recognising logitech mice Input: synaptics - ensure we reset the device on resume Input: usbtouchscreen - fix eGalax HID ignoring Input: ambakmi - fix timeout handling in amba_kmi_write() Input: pxa930_trkball - fix write timeout handling Input: struct device - replace bus_id with dev_name(), dev_set_name() Input: bf54x-keys - fix debounce time validation Input: spitzkbd - mark probe function as __devinit Input: omap-keypad - mark probe function as __devinit Input: corgi_ts - mark probe function as __devinit Input: corgikbd - mark probe function as __devinit Input: uvc - the button on the camera is KEY_CAMERA Input: psmouse - make MOUSE_PS2_LIFEBOOK depend on X86 Input: atkbd - make forced_release_keys[] static Input: usbtouchscreen - allow reporting calibrated data
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: don't call jbd2_journal_force_commit_nested without journal ext4: Reorder fs/Makefile so that ext2 root fs's are mounted using ext2 ext4: Remove duplicate call to ext4_commit_super() in ext4_freeze()
-