- 20 2月, 2015 3 次提交
-
-
由 Daniel Thompson 提交于
Currently when kdb traps printk messages then the raw log level prefix (consisting of '\001' followed by a numeral) does not get stripped off before the message is issued to the various I/O handlers supported by kdb. This causes annoying visual noise as well as causing problems grepping for ^. It is also a change of behaviour compared to normal usage of printk() usage. For example <SysRq>-h ends up with different output to that of kdb's "sr h". This patch addresses the problem by stripping log levels from messages before they are issued to the I/O handlers. printk() which can also act as an i/o handler in some cases is special cased; if the caller provided a log level then the prefix will be preserved when sent to printk(). The addition of non-printable characters to the output of kdb commands is a regression, albeit and extremely elderly one, introduced by commit 04d2c8c8 ("printk: convert the format for KERN_<LEVEL> to a 2 byte pattern"). Note also that this patch does *not* restore the original behaviour from v3.5. Instead it makes printk() from within a kdb command display the message without any prefix (i.e. like printk() normally does). Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> Cc: Joe Perches <joe@perches.com> Cc: stable@vger.kernel.org Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jason Wessel 提交于
There was a follow on replacement patch against the prior "kgdb: Timeout if secondary CPUs ignore the roundup". See: https://lkml.org/lkml/2015/1/7/442 This patch is the delta vs the patch that was committed upstream: * Fix an off-by-one error in kdb_cpu(). * Replace NR_CPUS with CONFIG_NR_CPUS to tell checkpatch that we really want a static limit. * Removed the "KGDB: " prefix from the pr_crit() in debug_core.c (kgdb-next contains a patch which introduced pr_fmt() to this file to the tag will now be applied automatically). Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jay Lan 提交于
The output of KDB 'summary' command should report MemTotal, MemFree and Buffers output in kB. Current codes report in unit of pages. A define of K(x) as is defined in the code, but not used. This patch would apply the define to convert the values to kB. Please include me on Cc on replies. I do not subscribe to linux-kernel. Signed-off-by: NJay Lan <jlan@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
- 09 2月, 2015 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.rocketboards.org/linux-socfpga-next由 Linus Torvalds 提交于
Pull nios2 fix from Ley Foon Tan: "This fixes incorrect behavior of some user programs" * tag 'nios2-fixes-v3.19-final' of git://git.rocketboards.org/linux-socfpga-next: nios2: fix unhandled signals
-
git://git.kvack.org/~bcrl/aio-fixes由 Linus Torvalds 提交于
Pull aio nested sleep annotation from Ben LaHaise, * git://git.kvack.org/~bcrl/aio-fixes: aio: annotate aio_read_event_ring for sleep patterns
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fixes from Steven Rostedt: "During testing Sedat Dilek hit a "suspicious RCU usage" splat that pointed out a real bug. During suspend and resume the tlb_flush tracepoint is called when the CPU is going offline. As the CPU has been noted as offline, RCU is ignoring that CPU, which means that it can not use RCU protected locks. When tracepoints are activated, they require RCU locking, and if RCU is ignoring a CPU that runs a tracepoint, there is a chance that the tracepoint could cause corruption. The solution was to change the tracepoint into a TRACE_EVENT_CONDITION() which allows us to check a condition to determine if the tracepoint should be called or not. If the condition is not met, the rcu protected code will not be executed. By adding the condition "cpu_online(smp_processor_id())", this will prevent the RCU protected code from being executed if the CPU is marked offline. After adding this, another bug was discovered. As RCU checks rcu callers, if a rcu call is not done, there is no check (obviously). We found that tracepoints could be added in RCU ignored locations and not have lockdep complain until the tracepoint is activated. This missed places where tracepoints were added in places they should not have been. To fix this, code was added in 3.18 that if lockdep is enabled, any tracepoint will still call the rcu checks even if the tracepoint is not enabled. The bug here, is that the check does not take the CONDITION into account. As the condition may prevent tracepoints from being activated in RCU ignored areas (as the one patch does), we get false positives when we enable lockdep and hit a tracepoint that the condition prevents it from being called in a RCU ignored location. The fix for this is to add the CONDITION to the rcu checks, even if the tracepoint is not enabled" * tag 'trace-fixes-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: x86/tlb/trace: Do not trace on CPU that is offline tracing: Add condition check to RCU lockdep checks
-
由 Chung-Ling Tang 提交于
Follow other architectures for user fault handling. Signed-off-by: NChung-Ling Tang <cltang@codesourcery.com> Acked-by: NLey Foon Tan <lftan@altera.com>
-
- 08 2月, 2015 4 次提交
-
-
由 Steven Rostedt (Red Hat) 提交于
When taking a CPU down for suspend and resume, a tracepoint may be called when the CPU has been designated offline. As tracepoints require RCU for protection, they must not be called if the current CPU is offline. Unfortunately, trace_tlb_flush() is called in this scenario as was noted by LOCKDEP: ... Disabling non-boot CPUs ... intel_pstate CPU 1 exiting =============================== smpboot: CPU 1 didn't die... [ INFO: suspicious RCU usage. ] 3.19.0-rc7-next-20150204.1-iniza-small #1 Not tainted ------------------------------- include/trace/events/tlb.h:35 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 0 no locks held by swapper/1/0. stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.19.0-rc7-next-20150204.1-iniza-small #1 Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 0000000000000001 ffff88011a44fe18 ffffffff817e370d 0000000000000011 ffff88011a448290 ffff88011a44fe48 ffffffff810d6847 ffff8800c66b9600 0000000000000001 ffff88011a44c000 ffffffff81cb3900 ffff88011a44fe78 Call Trace: [<ffffffff817e370d>] dump_stack+0x4c/0x65 [<ffffffff810d6847>] lockdep_rcu_suspicious+0xe7/0x120 [<ffffffff810b71a5>] idle_task_exit+0x205/0x2c0 [<ffffffff81054c4e>] play_dead_common+0xe/0x50 [<ffffffff81054ca5>] native_play_dead+0x15/0x140 [<ffffffff8102963f>] arch_cpu_idle_dead+0xf/0x20 [<ffffffff810cd89e>] cpu_startup_entry+0x37e/0x580 [<ffffffff81053e20>] start_secondary+0x140/0x150 intel_pstate CPU 2 exiting ... By converting the tlb_flush tracepoint to a TRACE_EVENT_CONDITION where the condition is cpu_online(smp_processor_id()), we can avoid calling RCU protected code when the CPU is offline. Link: http://lkml.kernel.org/r/CA+icZUUGiGDoL5NU8RuxKzFjoLjEKRtUWx=JB8B9a0EQv-eGzQ@mail.gmail.com Cc: stable@vger.kernel.org # 3.17+ Fixes: d17d8f9d "x86/mm: Add tracepoints for TLB flushes" Reported-by: NSedat Dilek <sedat.dilek@gmail.com> Tested-by: NSedat Dilek <sedat.dilek@gmail.com> Suggested-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Hansen <dave@sr71.net> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt (Red Hat) 提交于
The trace_tlb_flush() tracepoint can be called when a CPU is going offline. When a CPU is offline, RCU is no longer watching that CPU and since the tracepoint is protected by RCU, it must not be called. To prevent the tlb_flush tracepoint from being called when the CPU is offline, it was converted to a TRACE_EVENT_CONDITION where the condition checks if the CPU is online before calling the tracepoint. Unfortunately, this was not enough to stop lockdep from complaining about it. Even though the RCU protected code of the tracepoint will never be called, the condition is hidden within the tracepoint, and even though the condition prevents RCU code from being called, the lockdep checks are outside the tracepoint (this is to test tracepoints even when they are not enabled). Even though tracepoints should be checked to be RCU safe when they are not enabled, the condition should still be considered when checking RCU. Link: http://lkml.kernel.org/r/CA+icZUUGiGDoL5NU8RuxKzFjoLjEKRtUWx=JB8B9a0EQv-eGzQ@mail.gmail.com Fixes: 3a630178 "tracing: generate RCU warnings even when tracepoints are disabled" Cc: stable@vger.kernel.org # 3.18+ Acked-by: NDave Hansen <dave@sr71.net> Reported-by: NSedat Dilek <sedat.dilek@gmail.com> Tested-by: NSedat Dilek <sedat.dilek@gmail.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
Pull one more infiniband revert from Roland Dreier: "One more last-second RDMA change for 3.19: Yann realized that the previous revert of new userspace ABI did not go far enough, and we're still exposing a change that we don't want. Revert even closer to 3.18 interface to make sure we get things right in the long run" Yann Droneaud pipes up: "I hope this could go in v3.19 as, at this stage, we don't want to expose any bits of this ABI in a released kernel" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: Revert "IB/core: Add support for extended query device caps"
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fix from Chris Mason: "Forrest Liu tracked down a missing blk_finish_plug in the btrfs logging code. This isn't a new bug, and it's hard to hit. But, it's safe enough for inclusion now, and in my for-linus branch" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: add missing blk_finish_plug in btrfs_sync_log()
-
- 07 2月, 2015 6 次提交
-
-
由 Linus Torvalds 提交于
Merge branches 'timers-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer and x86 fix from Ingo Molnar: "A CLOCK_TAI early expiry fix and an x86 microcode driver oops fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Fix incorrect tai offset calculation for non high-res timer systems * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode: Return error from driver init code when loader is disabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "Misc fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Fix deadline parameter modification handling sched/wait: Remove might_sleep() from wait_event_cmd() sched: Fix crash if cpuset_cpumask_can_shrink() is passed an empty cpumask sched/fair: Avoid using uninitialized variable in preferred_group_nid()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull core kernel fixes from Ingo Molnar: "Two liblockdep fixes and a CPU hotplug race fix" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/liblockdep: don't include host headers tools/liblockdep: ignore generated .so file smpboot: Add missing get_online_cpus() in smpboot_register_percpu_thread()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Hopefully the final pull request for 3.19: this ended up with a slightly higher volume than wished, but I put them all as they are either stable or 3.19 regression fixes. Most of commits are from ASoC, and have been stewed for a while in linux-next. The only change in the common code is the regression fixes for ASoC AC97 stuff wrt device registrations. The rest are device-specific, mostly small fixes in various ASoC drivers and ak411x on ice1724 boards" * tag 'sound-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: Intel: fix sst firmware path for cht-bsw-rt5672 ARM: dts: Fix I2S1, I2S2 compatible for exynos4 SoCs ASoC: sgtl5000: add delay before first I2C access MAINTAINERS: ASoC: add maintainer for Intel BDW/HSW ASoC driver ASoC: atmel_ssc_dai: fix the setting for DSP mode ASoC: sgtl5000: Use shift mask when setting codec mode ASoC: tlv320aic3x: Fix data delay configuration ALSA: ak411x: Fix stall in work callback ASoC: Intel: Used lock version to update shim registers ASoC: wm8731: init mutex in i2c init path ASoC: atmel_ssc_dai: fix start event for I2S mode ASoC: rt5640: Add RT5642 ACPI ID for Intel Baytrail ASoC: wm97xx: Reset AC'97 device before registering it ASoC: Add support for allocating AC'97 device before registering it
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "7 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/debug_pagealloc: fix build failure on ppc and some other archs nilfs2: fix deadlock of segment constructor over I_SYNC flag MAINTAINERS: remove SUPERH website memcg, shmem: fix shmem migration to use lrucare mm: export "high_memory" symbol on !MMU .mailmap: update Konstantin Khlebnikov's email address mm: pagewalk: call pte_hole() for VM_PFNMAP during walk_page_range
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "The pending MIPS fixes for 3.19. All across the field and nothing particularly severe or dramatic" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (23 commits) IRQCHIP: mips-gic: Avoid rerouting timer IRQs for smp-cmp MIPS: Fix syscall_get_nr for the syscall exit tracing. MIPS: elf2ecoff: Ignore PT_MIPS_ABIFLAGS program headers. MIPS: elf2ecoff: Rewrite main processing loop to switch. MIPS: fork: Fix MSA/FPU/DSP context duplication race MIPS: Fix C0_Pagegrain[IEC] support. MIPS: traps: Fix inline asm ctc1 missing .set hardfloat MIPS: mipsregs.h: Add write_32bit_cp1_register() MIPS: Fix kernel lockup or crash after CPU offline/online MIPS: OCTEON: fix kernel crash when offlining a CPU MIPS: ARC: Fix build error. MIPS: IRQ: Fix disable_irq on CPU IRQs MIPS: smp-mt,smp-cmp: Enable all HW IRQs on secondary CPUs MIPS: Fix restart of indirect syscalls MIPS: ELF: fix loading o32 binaries on 64-bit kernels MIPS: mips-cm: Fix sparse warnings MIPS: Kconfig: Fix recursive dependency. MIPS: Compat: Fix build error if CONFIG_MIPS32_COMPAT but no compat ABI. MIPS: JZ4740: Fixup #include's (sparse) MIPS: Wire up execveat(2). ...
-
- 06 2月, 2015 22 次提交
-
-
由 Yann Droneaud 提交于
While commit 7e36ef82 ("IB/core: Temporarily disable ex_query_device uverb") is correct as it makes the extended QUERY_DEVICE uverb (which came as part of commit 5a77abf9 ("IB/core: Add support for extended query device caps") and commit 860f10a7 ("IB/core: Add flags for on demand paging support")) not available to userspace, it doesn't address the initial issue regarding ib_copy_to_udata() [1][2]. Additionally, further discussions around this new uverb seems to conclude it would require a different data structure than the one currently described in <rdma/ib_user_verbs.h> [3]. Both of these issues require a revert of the changes, so this patch partially reverts commit 8cdd312c ("IB/mlx5: Implement the ODP capability query verb") and commit 860f10a7 ("IB/core: Add flags for on demand paging support") and fully reverts commit 5a77abf9 ("IB/core: Add support for extended query device caps"). [1] "Re: [PATCH v3 06/17] IB/core: Add support for extended query device caps" http://mid.gmane.org/1418733236.2779.26.camel@opteya.com [2] "Re: [PATCH] IB/core: Temporarily disable ex_query_device uverb" http://mid.gmane.org/1423067503.3030.83.camel@opteya.com [3] "RE: [PATCH v1 1/5] IB/uverbs: ex_query_device: answer must not depend on request's comp_mask" http://mid.gmane.org/2807E5FD2F6FDA4886F6618EAC48510E0CC12C30@CRSMSX101.amr.corp.intel.com Cc: Eli Cohen <eli@mellanox.com> Cc: Haggai Eran <haggaie@mellanox.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Shachar Raindel <raindel@mellanox.com> Signed-off-by: NYann Droneaud <ydroneaud@opteya.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
由 Joonsoo Kim 提交于
Kim Phillips reported following build failure. LD init/built-in.o mm/built-in.o: In function `free_pages_prepare': mm/page_alloc.c:770: undefined reference to `.kernel_map_pages' mm/built-in.o: In function `prep_new_page': mm/page_alloc.c:933: undefined reference to `.kernel_map_pages' mm/built-in.o: In function `map_pages': mm/compaction.c:61: undefined reference to `.kernel_map_pages' make: *** [vmlinux] Error 1 Reason for this problem is that commit 031bc574 ("mm/debug-pagealloc: make debug-pagealloc boottime configurable") forgot to remove the old declaration of kernel_map_pages() for some architectures. This patch removes them to fix build failure. Reported-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: David Miller <davem@davemloft.net> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ryusuke Konishi 提交于
Nilfs2 eventually hangs in a stress test with fsstress program. This issue was caused by the following deadlock over I_SYNC flag between nilfs_segctor_thread() and writeback_sb_inodes(): nilfs_segctor_thread() nilfs_segctor_thread_construct() nilfs_segctor_unlock() nilfs_dispose_list() iput() iput_final() evict() inode_wait_for_writeback() * wait for I_SYNC flag writeback_sb_inodes() * set I_SYNC flag on inode->i_state __writeback_single_inode() do_writepages() nilfs_writepages() nilfs_construct_dsync_segment() nilfs_segctor_sync() * wait for completion of segment constructor inode_sync_complete() * clear I_SYNC flag after __writeback_single_inode() completed writeback_sb_inodes() calls do_writepages() for dirty inodes after setting I_SYNC flag on inode->i_state. do_writepages() in turn calls nilfs_writepages(), which can run segment constructor and wait for its completion. On the other hand, segment constructor calls iput(), which can call evict() and wait for the I_SYNC flag on inode_wait_for_writeback(). Since segment constructor doesn't know when I_SYNC will be set, it cannot know whether iput() will block or not unless inode->i_nlink has a non-zero count. We can prevent evict() from being called in iput() by implementing sop->drop_inode(), but it's not preferable to leave inodes with i_nlink == 0 for long periods because it even defers file truncation and inode deallocation. So, this instead resolves the deadlock by calling iput() asynchronously with a workqueue for inodes with i_nlink == 0. Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Tested-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sudip Mukherjee 提交于
The mentioned website only displays information about buying and selling domains. Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
It has been reported that 965GM might trigger VM_BUG_ON_PAGE(!lrucare && PageLRU(oldpage), oldpage) in mem_cgroup_migrate when shmem wants to replace a swap cache page because of shmem_should_replace_page (the page is allocated from an inappropriate zone). shmem_replace_page expects that the oldpage is not on LRU list and calls mem_cgroup_migrate without lrucare. This is obviously incorrect because swapcache pages might be on the LRU list (e.g. swapin readahead page). Fix this by enabling lrucare for the migration in shmem_replace_page. Also clarify that lrucare should be used even if one of the pages might be on LRU list. The BUG_ON will trigger only when CONFIG_DEBUG_VM is enabled but even without that the migration code might leave the old page on an inappropriate memcg' LRU which is not that critical because the page would get removed with its last reference but it is still confusing. Fixes: 0a31bc97 ("mm: memcontrol: rewrite uncharge API") Signed-off-by: NMichal Hocko <mhocko@suse.cz> Reported-by: NChris Wilson <chris@chris-wilson.co.uk> Reported-by: NDave Airlie <airlied@gmail.com> Acked-by: NHugh Dickins <hughd@google.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> [3.17+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arnd Bergmann 提交于
The symbol 'high_memory' is provided on both MMU- and NOMMU-kernels, but only one of them is exported, which leads to module build errors in drivers that work fine built-in: ERROR: "high_memory" [drivers/net/virtio_net.ko] undefined! ERROR: "high_memory" [drivers/net/ppp/ppp_mppe.ko] undefined! ERROR: "high_memory" [drivers/mtd/nand/nand.ko] undefined! ERROR: "high_memory" [crypto/tcrypt.ko] undefined! ERROR: "high_memory" [crypto/cts.ko] undefined! This exports the symbol to get these to work on NOMMU as well. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: NGreg Ungerer <gerg@uclinux.org> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kim Phillips 提交于
get_maintainer.pl returns k.khlebnikov@samsung.com via git history, for which emails get rejected: RCPT TO:<k.khlebnikov@samsung.com> 550 5.1.1 Recipient address rejected: User unknown Use his other address that passes vger's mxverify: RCPT TO:<koct9i@gmail.com> 250 2.1.5 OK ir10si13843754pbc.62 - gsmtp and add his old email address in the wrong email address field. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Acked-by: NKonstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Shiraz Hashim 提交于
walk_page_range() silently skips vma having VM_PFNMAP set, which leads to undesirable behaviour at client end (who called walk_page_range). Userspace applications get the wrong data, so the effect is like just confusing users (if the applications just display the data) or sometimes killing the processes (if the applications do something with misunderstanding virtual addresses due to the wrong data.) For example for pagemap_read, when no callbacks are called against VM_PFNMAP vma, pagemap_read may prepare pagemap data for next virtual address range at wrong index. Eventually userspace may get wrong pagemap data for a task. Corresponding to a VM_PFNMAP marked vma region, kernel may report mappings from subsequent vma regions. User space in turn may account more pages (than really are) to the task. In my case I was using procmem, procrack (Android utility) which uses pagemap interface to account RSS pages of a task. Due to this bug it was giving a wrong picture for vmas (with VM_PFNMAP set). Fixes: a9ff785e ("mm/pagewalk.c: walk_page_range should avoid VM_PFNMAP areas") Signed-off-by: NShiraz Hashim <shashim@codeaurora.org> Acked-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> [3.10+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Takashi Iwai 提交于
Merge tag 'asoc-fix-ac97-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: AC'97 fixes These are rather too large for this late in the release cycle but they're clear, well understood and have been tested to fix a regression which was introduced for v3.19. The details are all in Lars' changelog and they've been cooking in -next for a while, to a large extent out of conservatism about the size.
-
由 Takashi Iwai 提交于
Merge tag 'asoc-fix-intel-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fix for Intel firmware name Another one liner that arrived after the earlier pull request. There's a trivial conflict with my -next branch, I'll send a pull request with that resolution and some other new stuff before Monday.
-
由 Takashi Iwai 提交于
Merge tag 'asoc-fix-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.19 A few last minute fixes for v3.19, all driver specific. None of them stand out particularly - it's all the standard people who are affected will care stuff. The Samsung fix is a DT only fix for the audio controller, it's being merged via the ASoC tree due to process messups (the submitter sent it at the end of a tangentally related series rather than separately to the ARM folks) in order to make sure that it gets to people sooner.
-
由 Kevin Strasser 提交于
All sst firmware is provided under the intel directory of the linux-firmware tree. By default this directory structure is kept when installing on a target system. Change the path to expect a default linux-firmware installation. Signed-off-by: NKevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Mark Brown 提交于
-
由 Sylwester Nawrocki 提交于
I2S1, I2S2 on Exynos4 SoC series have limited functionality compared to I2S0, "samsung,s3c6410-i2s" compatible should be used for them. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Stretch ACKs can kill performance with Reno and CUBIC congestion control, largely due to LRO and GRO. Fix from Neal Cardwell. 2) Fix userland breakage because we accidently emit zero length netlink messages from the bridging code. From Roopa Prabhu. 3) Carry handling in generic csum_tcpudp_nofold is broken, fix from Karl Beldan. 4) Remove bogus dev_set_net() calls from CAIF driver, from Nicolas Dichtel. 5) Make sure PPP deflation never returns a length greater then the output buffer, otherwise we overflow and trigger skb_over_panic(). Fix from Florian Westphal. 6) COSA driver needs VIRT_TO_BUS Kconfig dependencies, from Arnd Bergmann. 7) Don't increase route cached MTU on datagram too big ICMPs. From Li Wei. 8) Fix error path leaks in nf_tables, from Pablo Neira Ayuso. 9) Fix bitmask handling regression in netlink that broke things like acpi userland tools. From Pablo Neira Ayuso. 10) Wrong header pointer passed to param_type2af() in SCTP code, from Saran Maruti Ramanara. 11) Stacked vlans not handled correctly by vlan_get_protocol(), from Toshiaki Makita. 12) Add missing DMA memory barrier to xgene driver, from Iyappan Subramanian. 13) Fix crash in rate estimators, from Eric Dumazet. 14) We've been adding various workarounds, one after another, for the change which added the per-net tcp_sock. It was meant to reduce socket contention but added lots of problems. Reduce this instead to a proper per-cpu socket and that rids us of all the daemons. From Eric Dumazet. 15) Fix memory corruption and OOPS in mlx4 driver, from Jack Morgenstein. 16) When we disabled UFO in the virtio_net device, it introduces some serious performance regressions. The orignal problem was IPV6 fragment ID generation, so fix that properly instead. From Vlad Yasevich. 17) sr9700 driver build breaks on xtensa because it defines macros with the same name as those used by the arch code. Use more unique names. From Chen Gang. 18) Fix endianness in new virio 1.0 mode of the vhost net driver, from Michael S Tsirkin. 19) Several sysctls were setting the maxlen attribute incorrectly, from Sasha Levin. 20) Don't accept an FQ scheduler quantum of zero, that leads to crashes. From Kenneth Klette Jonassen. 21) Fix dumping of non-existing actions in the packet scheduler classifier. From Ignacy Gawędzki. 22) Return the write work_done value when doing TX work in the qlcnic driver. 23) ip6gre_err accesses the info field with the wrong endianness, from Sabrina Dubroca. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits) sit: fix some __be16/u16 mismatches ipv6: fix sparse errors in ip6_make_flowlabel() net: remove some sparse warnings flow_keys: n_proto type should be __be16 ip6_gre: fix endianness errors in ip6gre_err qlcnic: Fix NAPI poll routine for Tx completion amd-xgbe: Set RSS enablement based on hardware features amd-xgbe: Adjust for zero-based traffic class count cls_api.c: Fix dumping of non-existing actions' stats. pkt_sched: fq: avoid hang when quantum 0 net: rds: use correct size for max unacked packets and bytes vhost/net: fix up num_buffers endian-ness gianfar: correct the bad expression while writing bit-pattern net: usb: sr9700: Use 'SR_' prefix for the common register macros Revert "drivers/net: Disable UFO through virtio" Revert "drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets" ipv6: Select fragment id during UFO segmentation if not set. xen-netback: stop the guest rx thread after a fatal error net/mlx4_core: Fix kernel Oops (mem corruption) when working with more than 80 VFs isdn: off by one in connect_res() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This patch set is fixing two serious problems which have turned up late in the release cycle. The first fixes a problem with 4k sector disks where the transfer length (amount of data sent to the disk) was getting increased every time the disk was revalidated leading to potential for overflows. The other is a regression oops fix for some of our last merge window code" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sd: Fix max transfer length for 4k disks scsi: fix device handler detach oops
-