- 05 1月, 2020 12 次提交
-
-
由 Sasha Neftin 提交于
We want to avoid forward-declarations of function if possible. Rearrange the igc_free_q_vector function implementation. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
We want to avoid forward-declarations of function if possible. Rearrange the igc_free_q_vectors function implementation. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
We want to avoid forward-declarations of function if possible. Rearrange the igc_irq_disable function implementation. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
We want to avoid forward-declarations of function if possible. Rearrange the igc_irq_enable function implementation. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
We want to avoid forward-declarations of function if possible. Rearrange the igc_configure_msix function implementation. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
We want to avoid forward-declarations of function if possible. Rearrange the igc_set_rx_mode function implementation. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
We want to avoid forward-declarations of function if possible. Rearrange the igc_set_interrupt_capability function implementation. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
We want to avoid forward-declarations of function if possible. Rearrange the igc_alloc_mapped_page function implementation. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
We want to avoid forward-declarations of function if possible. Rearrange the igc_configure function implementation. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
We want to avoid forward-declarations of function if possible. Rearrange the igc_set_default_mac_filter function implementation. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
We want to avoid forward-declarations of function if possible. Rearrange the igc_power_down_link function implementation. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
We want to avoid forward-declarations of function if possible. Rearrange the igc_clean_tx_ring function implementation. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 01 1月, 2020 9 次提交
-
-
由 Sasha Neftin 提交于
Serdes interface is not applicable for i225 devices. Remove this from comments and make comments more clearly. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
Add suspend, resume, runtime_suspend, runtime_resume and runtime_idle callbacks implementation. Reported-by: Nkbuild test robot <lpk@intel.com> Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
On relevant platforms ndo_start_xmit can handle socket buffer fragments in high memory Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
igc_watchdog, igc_set_interrupt_capability, igc_init_interrupt_scheme, __igc_open and __igc_close parameter descriptions has not reflected functions meaning. Add meaningful description. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
The function description for igc_alloc_rx_buffers has not reflected the function meaning. Add meaningful description. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
The function description for igc_is_non_eop includes an extra @skb parameter description. This parameter doesn't exist on the function, so remove it. Suggested-by: NJacob Keller <jacob.e.keller@intel.com> Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
Use the pci_release_mem_regions method instead of the pci_release_selected_regions method Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
Improve the probe flow and set both the DMA mask and the coherent to the same thing. Make the flow optimized and cleared. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
Scatter gather is used to do DMA data transfers of data that is written to noncontiguous areas of memory. This patch enables scatter gather support. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 09 11月, 2019 1 次提交
-
-
由 Jacob Keller 提交于
When implementing launch time support in the igb and igc drivers, the skb->tstamp value is assumed to be a s64, but it's declared as a ktime_t value. Although ktime_t is typedef'd to s64 it wasn't always, and the kernel provides accessors for ktime_t values. Use the ktime_to_timespec64 and ktime_set accessors instead of directly assuming that the variable is always an s64. This improves portability if the code is ever moved to another kernel version, or if the definition of ktime_t ever changes again in the future. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Acked-by: NVinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 08 11月, 2019 1 次提交
-
-
由 Florian Fainelli 提交于
Changing a network device MTU can be a fairly frequent operation, and failure to change the MTU is reflected to user-space properly, both by an appropriate message as well as by looking at whether the device's MTU matches the configuration. Demote the prints to debug prints by using netdev_dbg(), making all Intel wired LAN drivers consistent, since they used a mixture of PCI device and network device prints before. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2019 1 次提交
-
-
由 Lyude Paul 提交于
Fatal read errors are worth warning about, unless of course the device was just unplugged from the machine - something that's a rather normal occurrence when the igb/igc adapter is located on a Thunderbolt dock. So, let's only WARN() if there's a fatal read error while the device is still present. This fixes the following WARN splat that's been appearing whenever I unplug my Caldigit TS3 Thunderbolt dock from my laptop: igb 0000:09:00.0 enp9s0: PCIe link lost ------------[ cut here ]------------ igb: Failed to read reg 0x18! WARNING: CPU: 7 PID: 516 at drivers/net/ethernet/intel/igb/igb_main.c:756 igb_rd32+0x57/0x6a [igb] Modules linked in: igb dca thunderbolt fuse vfat fat elan_i2c mei_wdt mei_hdcp i915 wmi_bmof intel_wmi_thunderbolt iTCO_wdt iTCO_vendor_support x86_pkg_temp_thermal intel_powerclamp joydev coretemp crct10dif_pclmul crc32_pclmul i2c_algo_bit ghash_clmulni_intel intel_cstate drm_kms_helper intel_uncore syscopyarea sysfillrect sysimgblt fb_sys_fops intel_rapl_perf intel_xhci_usb_role_switch mei_me drm roles idma64 i2c_i801 ucsi_acpi typec_ucsi mei intel_lpss_pci processor_thermal_device typec intel_pch_thermal intel_soc_dts_iosf intel_lpss int3403_thermal thinkpad_acpi wmi int340x_thermal_zone ledtrig_audio int3400_thermal acpi_thermal_rel acpi_pad video pcc_cpufreq ip_tables serio_raw nvme nvme_core crc32c_intel uas usb_storage e1000e i2c_dev CPU: 7 PID: 516 Comm: kworker/u16:3 Not tainted 5.2.0-rc1Lyude-Test+ #14 Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018 Workqueue: kacpi_hotplug acpi_hotplug_work_fn RIP: 0010:igb_rd32+0x57/0x6a [igb] Code: 87 b8 fc ff ff 48 c7 47 08 00 00 00 00 48 c7 c6 33 42 9b c0 4c 89 c7 e8 47 45 cd dc 89 ee 48 c7 c7 43 42 9b c0 e8 c1 94 71 dc <0f> 0b eb 08 8b 00 ff c0 75 b0 eb c8 44 89 e0 5d 41 5c c3 0f 1f 44 RSP: 0018:ffffba5801cf7c48 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e7956608840 RCX: 0000000000000007 RDX: 0000000000000000 RSI: ffffba5801cf7b24 RDI: ffff9e795e3d6a00 RBP: 0000000000000018 R08: 000000009dec4a01 R09: ffffffff9e61018f R10: 0000000000000000 R11: ffffba5801cf7ae5 R12: 00000000ffffffff R13: ffff9e7956608840 R14: ffff9e795a6f10b0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9e795e3c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564317bc4088 CR3: 000000010e00a006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: igb_release_hw_control+0x1a/0x30 [igb] igb_remove+0xc5/0x14b [igb] pci_device_remove+0x3b/0x93 device_release_driver_internal+0xd7/0x17e pci_stop_bus_device+0x36/0x75 pci_stop_bus_device+0x66/0x75 pci_stop_bus_device+0x66/0x75 pci_stop_and_remove_bus_device+0xf/0x19 trim_stale_devices+0xc5/0x13a ? __pm_runtime_resume+0x6e/0x7b trim_stale_devices+0x103/0x13a ? __pm_runtime_resume+0x6e/0x7b trim_stale_devices+0x103/0x13a acpiphp_check_bridge+0xd8/0xf5 acpiphp_hotplug_notify+0xf7/0x14b ? acpiphp_check_bridge+0xf5/0xf5 acpi_device_hotplug+0x357/0x3b5 acpi_hotplug_work_fn+0x1a/0x23 process_one_work+0x1a7/0x296 worker_thread+0x1a8/0x24c ? process_scheduled_works+0x2c/0x2c kthread+0xe9/0xee ? kthread_destroy_worker+0x41/0x41 ret_from_fork+0x35/0x40 ---[ end trace 252bf10352c63d22 ]--- Signed-off-by: NLyude Paul <lyude@redhat.com> Fixes: 47e16692 ("igb/igc: warn when fatal read failure happens") Acked-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Acked-by: NFeng Tang <feng.tang@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 22 10月, 2019 4 次提交
-
-
由 Sasha Neftin 提交于
VLAN filter table array not implemented yet and shadow_vfta pointer not used. Clean up the code and remove the unused shadow_vfta pointer. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
Extend the socket buffer field process and add Rx checksum functionality Minor: fix indentation with tab instead of spaces. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
Add multicast addresses list to the MTA table. Implement basic Rx mode support. Add option for IPv6 address settings. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
Add stream control transmission protocol CRC checksum. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 10 9月, 2019 2 次提交
-
-
由 Sasha Neftin 提交于
Add IP generic TX checksum offload functionality. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Sasha Neftin 提交于
Add NVM checksum validation during probe functionality. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 23 8月, 2019 1 次提交
-
-
由 Markus Elfring 提交于
The dev_kfree_skb() function performs also input parameter validation. Thus the test around the shown calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 7月, 2019 1 次提交
-
-
由 Sasha Neftin 提交于
Add support for more SKUs. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 23 7月, 2019 1 次提交
-
-
由 Matthew Wilcox (Oracle) 提交于
In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 7月, 2019 1 次提交
-
-
由 Frederick Lawler 提交于
Commit 8c0d3a02 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by: NFrederick Lawler <fred@fredlawl.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 5月, 2019 2 次提交
-
-
由 Sasha Neftin 提交于
This change adds flow control settings. This is required to enable the legacy flow control support. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Feng Tang 提交于
Failed in read the HW register is very serious for igb/igc driver, as its hw_addr will be set to NULL and cause the adapter be seen as "REMOVED". We saw the error only a few times in the MTBF test for suspend/resume, but can hardly get any useful info to debug. Adding WARN() so that we can get the necessary information about where and how it happens, and use it for root causing and fixing this "PCIe link lost issue" This affects igb, igc. Signed-off-by: NFeng Tang <feng.tang@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Acked-by: NSasha Neftin <sasha.neftin@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 24 4月, 2019 1 次提交
-
-
由 Stanislav Fomichev 提交于
Update all users of eth_get_headlen to pass network device, fetch network namespace from it and pass it down to the flow dissector. This commit is a noop until administrator inserts BPF flow dissector program. Cc: Maxim Krasnyansky <maxk@qti.qualcomm.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: intel-wired-lan@lists.osuosl.org Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: NStanislav Fomichev <sdf@google.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 08 4月, 2019 1 次提交
-
-
由 Will Deacon 提交于
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
- 02 4月, 2019 1 次提交
-
-
由 Florian Westphal 提交于
There are two reasons for this. First, the xmit_more flag conceptually doesn't fit into the skb, as xmit_more is not a property related to the skb. Its only a hint to the driver that the stack is about to transmit another packet immediately. Second, it was only done this way to not have to pass another argument to ndo_start_xmit(). We can place xmit_more in the softnet data, next to the device recursion. The recursion counter is already written to on each transmit. The "more" indicator is placed right next to it. Drivers can use the netdev_xmit_more() helper instead of skb->xmit_more to check the "more packets coming" hint. skb->xmit_more is retained (but always 0) to not cause build breakage. This change takes care of the simple s/skb->xmit_more/netdev_xmit_more()/ conversions. Remaining drivers are converted in the next patches. Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 3月, 2019 1 次提交
-
-
由 Sasha Neftin 提交于
Copy the ntuple feature into list of user selectable features. Enable the ntuple feature. Signed-off-by: NSasha Neftin <sasha.neftin@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-