Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 22 5月, 2015 4 次提交
  3. 17 4月, 2015 2 次提交
  5. 09 4月, 2015 1 次提交
  7. 09 3月, 2015 1 次提交
  9. 02 3月, 2015 1 次提交
    • V
      net: stmmac: Use setup_timer and mod_timer · ccb36da1
      由 Vaishali Thakkar 提交于 
      Use timer API functions setup_timer and mod_timer instead
of structure assignments as they are standard way to set
the timer and to update the expire field of an active timer
respectively.

This is done using Coccinelle and semantic patch used for
this is as follows:

// <smpl>
@@
expression x,y,z,a,b;
@@

-init_timer (&x);
+setup_timer (&x, y, z);
+mod_timer (&a, b);
-x.function = y;
-x.data = z;
-x.expires = b;
-add_timer(&a);
// </smpl>
Signed-off-by: NVaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ccb36da1
  11. 02 2月, 2015 1 次提交
  13. 28 1月, 2015 1 次提交
  15. 27 1月, 2015 3 次提交
  17. 23 12月, 2014 1 次提交
    • H
      stmmac: Don't init ptp again when resume from suspend/hibernation · fe131929
      由 Huacai Chen 提交于 
      Both stmmac_open() and stmmac_resume() call stmmac_hw_setup(), and
stmmac_hw_setup() call stmmac_init_ptp() unconditionally. However, only
stmmac_release() calls stmmac_release_ptp(). Since stmmac_suspend()
doesn't call stmmac_release_ptp(), stmmac_resume() also needn't call
stmmac_init_ptp().

This patch also fix a "scheduling while atomic" problem when resume
from suspend/hibernation. Because stmmac_init_ptp() will trigger
scheduling while stmmac_resume() hold a spinlock.

Callgraph of "scheduling while atomic":
stmmac_resume() --> stmmac_hw_setup() --> stmmac_init_ptp() -->
stmmac_ptp_register() --> ptp_clock_register() --> device_create() -->
device_create_groups_vargs() --> device_add() --> devtmpfs_create_node()
--> wait_for_common() --> schedule_timeout() --> __schedule()
Signed-off-by: NHuacai Chen <chenhc@lemote.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fe131929
  19. 20 11月, 2014 1 次提交
  21. 12 11月, 2014 1 次提交
  23. 08 11月, 2014 1 次提交
  25. 06 11月, 2014 6 次提交
  27. 04 10月, 2014 1 次提交
  29. 30 9月, 2014 1 次提交
  31. 02 9月, 2014 2 次提交
  33. 01 9月, 2014 2 次提交
  35. 30 8月, 2014 2 次提交
  37. 26 8月, 2014 2 次提交
  39. 01 8月, 2014 3 次提交
    • V
      net: stmmac: Support devicetree configs for mcast and ucast filter entries · 3b57de95
      由 Vince Bridgers 提交于 
      This patch adds and modifies code to support multiple Multicast and Unicast
Synopsys MAC filter configurations. The default configuration is defined to
support legacy driver behavior, which is 64 Multicast bins. The Unicast
filter code previously assumed all controllers support 32 or 16 Unicast
addresses based on controller version number, but this has been corrected
to support a default of 1 Unicast address. The filter configuration may
be specified through the devicetree using a Synopsys specific device tree
entry. This information was verified with Synopsys through
Synopsys Support Case #8000684337 and shared with the maintainer.
Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3b57de95
    • V
      net: stmmac: Correct set_filter for multicast and unicast cases · aefef4c1
      由 Vince Bridgers 提交于 
      This patch removes the check for the number of mulitcast addresses
when using hash based filtering since it's not necessary. If the number
of multicast addresses in the list exceeds the number of multicast hash
bins, the bins will "fold" over into one of the bins configured and
enabled for the particular component instance.

The default number of maximum unicast addresses was changed from 32 to 1
since this number is not dependent on the component revision. The maximum
number of multicast and unicast addresses is dependent on the configuration
of the Synopsys EMAC configured by the SOC architect at the time the
features were selected and configured for a particular component. Sadly,
Synopsys does not provide a way to query the precise number supported
by a particular component, so we must fall back on a devicetree entry.
This configuration could vary from vendor to vendor (such as STMicro,
Altera, etc).

The multicast bins are set for every possible filtering case (including
no entries) - previously the bits were set only if multicast filter entries
were present.
Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      aefef4c1
    • V
      net: stmmac: Change MAC interface to support multiple filter configurations · 7ed24bbe
      由 Vince Bridgers 提交于 
      The synopsys EMAC can be configured for different numbers of multicast hash
bins and perfect filter entries at device creation time and there's no way
to query this configuration information at runtime. As a result, a devicetree
parameter is required in order for the driver to program these filters
correctly for a particular device instance. This patch modifies the
10/100/1000 MAC software interface such that these configuration parameters
can be set at initialization time.
Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7ed24bbe
  41. 31 7月, 2014 1 次提交
  43. 08 7月, 2014 1 次提交
  45. 03 7月, 2014 1 次提交