The function audit_log_secctx() is unused in the upstream kernel.
All it does is wrap another function that doesn't need wrapping.
It claims to give you the SELinux context, but that is not true if
you are using a different security module.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Reviewed-by: NJames Morris <james.l.morris@oracle.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

The API to end auditing has historically been for auditd to set the
pid to 0. This patch restores that functionality.

See: https://github.com/linux-audit/audit-kernel/issues/69Reviewed-by: NRichard Guy Briggs <rgb@redhat.com>
Signed-off-by: NSteve Grubb <sgrubb@redhat.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

The audit subsystem allows selecting audit events based on watches for
a particular behavior like writing to a file. A lot of syscalls have
been added without updating the list. This patch adds 2 syscalls to the
write filters: fallocate and renameat2.
Signed-off-by: NSteve Grubb <sgrubb@redhat.com>
Reviewed-by: NRichard Guy Briggs <rgb@redhat.com>
[PM: cleaned up some whitespace errors]
Signed-off-by: NPaul Moore <paul@paul-moore.com>

Use audit_set_enabled() to enable auditing during early boot.  This
obviously won't emit an audit change record, but it will work anyway
and should help prevent in future problems by consolidating the
enable/disable code in one function.
Reviewed-by: NRichard Guy Briggs <rgb@redhat.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

We were treating it as a boolean, let's make it a boolean to help
avoid future mistakes.
Reviewed-by: NRichard Guy Briggs <rgb@redhat.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

The simple_strtol() function is deprecated, use kstrtol() instead.
Reviewed-by: NRichard Guy Briggs <rgb@redhat.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

We can't initialize the audit subsystem until after the network layer
is initialized (core_initcall), but do it soon after.
Reviewed-by: NRichard Guy Briggs <rgb@redhat.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

Prior to this patch we enabled audit in audit_init(), which is too
late for PID 1 as the standard initcalls are run after the PID 1 task
is forked.  This means that we never allocate an audit_context (see
audit_alloc()) for PID 1 and therefore miss a lot of audit events
generated by PID 1.

This patch enables audit as early as possible to help ensure that when
PID 1 is forked it can allocate an audit_context if required.
Reviewed-by: NRichard Guy Briggs <rgb@redhat.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

Update the function comments to match the code.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

In the process of normalizing audit log messages, it was noticed that the AVC
initialization code registered an audit log KERNEL record that didn't fit the
standard format.  In the process of attempting to normalize it it was
determined that this record was not even necessary.  Remove it.

Ref: http://marc.info/?l=selinux&m=149614868525826&w=2
See: https://github.com/linux-audit/audit-kernel/issues/48Signed-off-by: NRichard Guy Briggs <rgb@redhat.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NSteve Grubb <sgrubb@redhat.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

Signed-off-by: NPaul Moore <paul@paul-moore.com>

Commit 2115bb25 ("audit: Use timespec64 to represent audit timestamps")
noted that audit timestamps were not y2038 safe and used a 64-bit
timestamp. In itself, this makes sense but the conversion was from
CURRENT_TIME to ktime_get_real_ts64() which is a heavier call to record
an accurate timestamp which is required in some, but not all, cases. The
impact is that when auditd is running without any rules that all syscalls
have higher overhead. This is visible in the sysbench-thread benchmark as
a 11.5% performance hit. That benchmark is dumb as rocks but it's also
visible in redis as an 8-10% hit on all operations which is of greater
concern. It is somewhat stupid of audit to track syscalls without any
rules related to syscalls but that is how it behaves.

The overhead can be directly measured with perf comparing 4.9 with 4.12

4.9
     7.76%  sysbench         [kernel.vmlinux]    [k] __schedule
     7.62%  sysbench         [kernel.vmlinux]    [k] _raw_spin_lock
     7.37%  sysbench         libpthread-2.22.so  [.] __lll_lock_elision
     7.29%  sysbench         [kernel.vmlinux]    [.] syscall_return_via_sysret
     6.59%  sysbench         [kernel.vmlinux]    [k] native_sched_clock
     5.21%  sysbench         libc-2.22.so        [.] __sched_yield
     4.38%  sysbench         [kernel.vmlinux]    [k] entry_SYSCALL_64
     4.28%  sysbench         [kernel.vmlinux]    [k] do_syscall_64
     3.49%  sysbench         libpthread-2.22.so  [.] __lll_unlock_elision
     3.13%  sysbench         [kernel.vmlinux]    [k] __audit_syscall_exit
     2.87%  sysbench         [kernel.vmlinux]    [k] update_curr
     2.73%  sysbench         [kernel.vmlinux]    [k] pick_next_task_fair
     2.31%  sysbench         [kernel.vmlinux]    [k] syscall_trace_enter
     2.20%  sysbench         [kernel.vmlinux]    [k] __audit_syscall_entry
.....
     0.00%  swapper          [kernel.vmlinux]    [k] read_tsc

4.12
     7.84%  sysbench         [kernel.vmlinux]    [k] __schedule
     7.05%  sysbench         [kernel.vmlinux]    [k] _raw_spin_lock
     6.57%  sysbench         libpthread-2.22.so  [.] __lll_lock_elision
     6.50%  sysbench         [kernel.vmlinux]    [.] syscall_return_via_sysret
     5.95%  sysbench         [kernel.vmlinux]    [k] read_tsc
     5.71%  sysbench         [kernel.vmlinux]    [k] native_sched_clock
     4.78%  sysbench         libc-2.22.so        [.] __sched_yield
     4.30%  sysbench         [kernel.vmlinux]    [k] entry_SYSCALL_64
     3.94%  sysbench         [kernel.vmlinux]    [k] do_syscall_64
     3.37%  sysbench         libpthread-2.22.so  [.] __lll_unlock_elision
     3.32%  sysbench         [kernel.vmlinux]    [k] __audit_syscall_exit
     2.91%  sysbench         [kernel.vmlinux]    [k] __getnstimeofday64

Note the additional overhead from read_tsc which goes from 0% to 5.95%.
This is on a single-socket E3-1230 but similar overheads have been measured
on an older machine which the patch also eliminates.

The patch in question has no explanation as to why a fully-accurate timestamp
is required and is likely an oversight.  Using a coarser, but monotically
increasing, timestamp the overhead can be eliminated.  While it can be
worked around by configuring or disabling audit, it's tricky enough to
detect that a kernel fix is justified. With this patch, we see the following;

sysbenchthread
                              4.9.0                 4.12.0                 4.12.0
                            vanilla                vanilla            coarse-v1r1
Amean     1         1.49 (   0.00%)        1.66 ( -11.42%)        1.51 (  -1.34%)
Amean     3         1.48 (   0.00%)        1.65 ( -11.45%)        1.50 (  -0.96%)
Amean     5         1.49 (   0.00%)        1.67 ( -12.31%)        1.51 (  -1.83%)
Amean     7         1.49 (   0.00%)        1.66 ( -11.72%)        1.50 (  -0.67%)
Amean     12        1.48 (   0.00%)        1.65 ( -11.57%)        1.52 (  -2.89%)
Amean     16        1.49 (   0.00%)        1.65 ( -11.13%)        1.51 (  -1.73%)

The benchmark is reporting the time required for different thread counts to
lock/unlock a private mutex which, while dense, demonstrates the syscall
overhead. This is showing that 4.12 took a 11-12% hit but the overhead is
almost eliminated by the patch. While the variance is not reported here,
it's well within the noise with the patch applied.
Signed-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

Pull MIPS fixes from Ralf Baechle:
 "The two indirect syscall fixes have sat in linux-next for a few days.
  I did check back with a hardware designer to ensure a SYNC is really
  what's required for the GIC fix and so the GIC fix didn't make it into
  to linux-next in time for this final pull request.

  It builds in local build tests and passes Imagination's test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  irqchip: mips-gic: SYNC after enabling GIC region
  MIPS: Remove pt_regs adjustments in indirect syscall handler
  MIPS: seccomp: Fix indirect syscall args

Pull x86 fixes from Thomas Gleixner:

 - Expand the space for uncompressing as the LZ4 worst case does not fit
   into the currently reserved space

 - Validate boot parameters more strictly to prevent out of bound access
   in the decompressor/boot code

 - Fix off by one errors in get_segment_base()

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Prevent faulty bootparams.screeninfo from causing harm
  x86/boot: Provide more slack space during decompression
  x86/ldt: Fix off by one in get_segment_base()

Pull timer fix from Thomas Gleixner:
 "A single fix for a thinko in the raw timekeeper update which causes
  clock MONOTONIC_RAW to run with erratically increased frequency"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Fix ktime_get_raw() incorrect base accumulation

Pull perf fixes from Thomas Gleixner:

 - Prevent a potential inconistency in the perf user space access which
   might lead to evading sanity checks.

 - Prevent perf recording function trace entries twice

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/ftrace: Fix double traces of perf on ftrace:function
  perf/core: Fix potential double-fetch bug

Pull cifs version warning fix from Steve French:
 "As requested, additional kernel warning messages to clarify the
  default dialect changes"

[ There is still some discussion about exactly which version should be
  the new default.  Longer-term we have auto-negotiation coming, but
  that's not there yet..  - Linus ]

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  Fix warning messages when mounting to older servers

Pull ARM SoC fixes from Olof Johansson:
 "A couple of late-arriving fixes before final 4.13:

   - A few reverts of DT bindings on Allwinner for their ethernet
     driver. Discussion didn't converge, and since bindings are
     considered ABI it makes sense to revert instead of having to
     support two bindings long-term.

   - A fix to enumerate GPIOs properly on Marvell Armada AP806"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: dts: marvell: fix number of GPIOs in Armada AP806 description
  arm: dts: sunxi: Revert EMAC changes
  arm64: dts: allwinner: Revert EMAC changes
  dt-bindings: net: Revert sun8i dwmac binding

mvebu fixes for 4.13 (part 3)

Fix number of GPIOs in AP806 description for Armada 7K/8K

* tag 'mvebu-fixes-4.13-3' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: fix number of GPIOs in Armada AP806 description
Signed-off-by: NOlof Johansson <olof@lixom.net>

Pull i2c fixes from Wolfram Sang:
 "The ismt driver had a problem with a rarely used transaction type and
  the designware driver was made even more robust against non standard
  ACPI tables"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: Round down ACPI provided clk to nearest supported clk
  i2c: ismt: Return EMSGSIZE for block reads with bogus length
  i2c: ismt: Don't duplicate the receive length for block reads

The race was introduced by me in commit 971316f0 ("epoll:
ep_unregister_pollwait() can use the freed pwq->whead").  I did not
realize that nothing can protect eventpoll after ep_poll_callback() sets
->whead = NULL, only whead->lock can save us from the race with
ep_free() or ep_remove().

Move ->whead = NULL to the end of ep_poll_callback() and add the
necessary barriers.

TODO: cleanup the ewake/EPOLLEXCLUSIVE logic, it was confusing even
before this patch.

Hopefully this explains use-after-free reported by syzcaller:

	BUG: KASAN: use-after-free in debug_spin_lock_before
	...
	 _raw_spin_lock_irqsave+0x4a/0x60 kernel/locking/spinlock.c:159
	 ep_poll_callback+0x29f/0xff0 fs/eventpoll.c:1148

this is spin_lock(eventpoll->lock),

	...
	Freed by task 17774:
	...
	 kfree+0xe8/0x2c0 mm/slub.c:3883
	 ep_free+0x22c/0x2a0 fs/eventpoll.c:865

Fixes: 971316f0 ("epoll: ep_unregister_pollwait() can use the freed pwq->whead")
Reported-by: N范龙飞 <long7573@126.com>
Cc: stable@vger.kernel.org
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Fix handling of pinned BPF map nodes in hash of maps, from Daniel
    Borkmann.

 2) IPSEC ESP error paths leak memory, from Steffen Klassert.

 3) We need an RCU grace period before freeing fib6_node objects, from
    Wei Wang.

 4) Must check skb_put_padto() return value in HSR driver, from FLorian
    Fainelli.

 5) Fix oops on PHY probe failure in ftgmac100 driver, from Andrew
    Jeffery.

 6) Fix infinite loop in UDP queue when using SO_PEEK_OFF, from Eric
    Dumazet.

 7) Use after free when tcf_chain_destroy() called multiple times, from
    Jiri Pirko.

 8) Fix KSZ DSA tag layer multiple free of SKBS, from Florian Fainelli.

 9) Fix leak of uninitialized memory in sctp_get_sctp_info(),
    inet_diag_msg_sctpladdrs_fill() and inet_diag_msg_sctpaddrs_fill().
    From Stefano Brivio.

10) L2TP tunnel refcount fixes from Guillaume Nault.

11) Don't leak UDP secpath in udp_set_dev_scratch(), from Yossi
    Kauperman.

12) Revert a PHY layer change wrt. handling of PHY_HALTED state in
    phy_stop_machine(), it causes regressions for multiple people. From
    Florian Fainelli.

13) When packets are sent out of br0 we have to clear the
    offload_fwdq_mark value.

14) Several NULL pointer deref fixes in packet schedulers when their
    ->init() routine fails. From Nikolay Aleksandrov.

15) Aquantium devices cannot checksum offload correctly when the packet
    is <= 60 bytes. From Pavel Belous.

16) Fix vnet header access past end of buffer in AF_PACKET, from
    Benjamin Poirier.

17) Double free in probe error paths of nfp driver, from Dan Carpenter.

18) QOS capability not checked properly in DCB init paths of mlx5
    driver, from Huy Nguyen.

19) Fix conflicts between firmware load failure and health_care timer in
    mlx5, also from Huy Nguyen.

20) Fix dangling page pointer when DMA mapping errors occur in mlx5,
    from Eran Ben ELisha.

21) ->ndo_setup_tc() in bnxt_en driver doesn't count rings properly,
    from Michael Chan.

22) Missing MSIX vector free in bnxt_en, also from Michael Chan.

23) Refcount leak in xfrm layer when using sk_policy, from Lorenzo
    Colitti.

24) Fix copy of uninitialized data in qlge driver, from Arnd Bergmann.

25) bpf_setsockopts() erroneously always returns -EINVAL even on
    success. Fix from Yuchung Cheng.

26) tipc_rcv() needs to linearize the SKB before parsing the inner
    headers, from Parthasarathy Bhuvaragan.

27) Fix deadlock between link status updates and link removal in netvsc
    driver, from Stephen Hemminger.

28) Missed locking of page fragment handling in ESP output, from Steffen
    Klassert.

29) Fix refcnt leak in ebpf congestion control code, from Sabrina
    Dubroca.

30) sxgbe_probe_config_dt() doesn't check devm_kzalloc()'s return value,
    from Christophe Jaillet.

31) Fix missing ipv6 rx_dst_cookie update when rx_dst is updated during
    early demux, from Paolo Abeni.

32) Several info leaks in xfrm_user layer, from Mathias Krause.

33) Fix out of bounds read in cxgb4 driver, from Stefano Brivio.

34) Properly propagate obsolete state of route upwards in ipv6 so that
    upper holders like xfrm can see it. From Xin Long.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (118 commits)
  udp: fix secpath leak
  bridge: switchdev: Clear forward mark when transmitting packet
  mlxsw: spectrum: Forbid linking to devices that have uppers
  wl1251: add a missing spin_lock_init()
  Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"
  net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278
  kcm: do not attach PF_KCM sockets to avoid deadlock
  sch_tbf: fix two null pointer dereferences on init failure
  sch_sfq: fix null pointer dereference on init failure
  sch_netem: avoid null pointer deref on init failure
  sch_fq_codel: avoid double free on init failure
  sch_cbq: fix null pointer dereferences on init failure
  sch_hfsc: fix null pointer deref and double free on init failure
  sch_hhf: fix null pointer dereference on init failure
  sch_multiq: fix double free on init failure
  sch_htb: fix crash on init failure
  net/mlx5e: Fix CQ moderation mode not set properly
  net/mlx5e: Fix inline header size for small packets
  net/mlx5: E-Switch, Unload the representors in the correct order
  net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address
  ...

Pull ceph fix from Ilya Dryomov:
 "ceph fscache page locking fix from Zheng, marked for stable"

* tag 'ceph-for-4.13-rc8' of git://github.com/ceph/ceph-client:
  ceph: fix readpage from fscache

Pull input fixes from Dmitry Torokhov:
 "Just a couple drivers fixes (Synaptics PS/2, Xpad)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xpad - fix PowerA init quirk for some gamepad models
  Input: synaptics - fix device info appearing different on reconnect

Pull two more MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix block status codes

  MMC host:
   - sdhci-xenon: Fix SD bus voltage select"

* tag 'mmc-v4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-xenon: add set_power callback
  mmc: block: Fix block status codes

Pull sound fixes from Takashi Iwai:
 "Three regression fixes that should be addressed before the final
  release: a missing mutex call in OSS PCM emulation ioctl, ASoC rt5670
  headset detection breakage, and a regression in simple-card parser
  code"

* tag 'sound-4.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: simple_card_utils: fix fallback when "label" property isn't present
  ALSA: pcm: Fix power lock unbalance via OSS emulation
  ASoC: rt5670: Fix GPIO headset detection regression

Pull s390 fixes from Martin Schwidefsky:
 "Three more bug fixes for v4.13.

  The two memory management related fixes are quite new, they fix kernel
  crashes that can be triggered by user space.

  The third commit fixes a bug in the vfio ccw translation code"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/mm: fix BUG_ON in crst_table_upgrade
  s390/mm: fork vs. 5 level page tabel
  vfio: ccw: fix bad ptr math for TIC cda translation

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - Regression in chacha20 handling of chunked input

   - Crash in algif_skcipher when used with async io

   - Potential bogus pointer dereference in lib/mpi"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_skcipher - only call put_page on referenced and used pages
  crypto: testmgr - add chunked test cases for chacha20
  crypto: chacha20 - fix handling of chunked input
  lib/mpi: kunmap after finishing accessing buffer

After commit dce4551c ("udp: preserve head state for IP_CMSG_PASSSEC")
we preserve the secpath for the whole skb lifecycle, but we also
end up leaking a reference to it.

We must clear the head state on skb reception, if secpath is
present.

Fixes: dce4551c ("udp: preserve head state for IP_CMSG_PASSSEC")
Signed-off-by: NYossi Kuperman <yossiku@mellanox.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 6bc506b4 ("bridge: switchdev: Add forward mark support for
stacked devices") added the 'offload_fwd_mark' bit to the skb in order
to allow drivers to indicate to the bridge driver that they already
forwarded the packet in L2.

In case the bit is set, before transmitting the packet from each port,
the port's mark is compared with the mark stored in the skb's control
block. If both marks are equal, we know the packet arrived from a switch
device that already forwarded the packet and it's not re-transmitted.

However, if the packet is transmitted from the bridge device itself
(e.g., br0), we should clear the 'offload_fwd_mark' bit as the mark
stored in the skb's control block isn't valid.

This scenario can happen in rare cases where a packet was trapped during
L3 forwarding and forwarded by the kernel to a bridge device.

Fixes: 6bc506b4 ("bridge: switchdev: Add forward mark support for stacked devices")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reported-by: NYotam Gigi <yotamg@mellanox.com>
Tested-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mlxsw driver relies on NETDEV_CHANGEUPPER events to configure the
device in case a port is enslaved to a master netdev such as bridge or
bond.

Since the driver ignores events unrelated to its ports and their
uppers, it's possible to engineer situations in which the device's data
path differs from the kernel's.

One example to such a situation is when a port is enslaved to a bond
that is already enslaved to a bridge. When the bond was enslaved the
driver ignored the event - as the bond wasn't one of its uppers - and
therefore a bridge port instance isn't created in the device.

Until such configurations are supported forbid them by checking that the
upper device doesn't have uppers of its own.

Fixes: 0d65fc13 ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reported-by: NNogah Frankel <nogahf@mellanox.com>
Tested-by: NNogah Frankel <nogahf@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When mounting to older servers, such as Windows XP (or even Windows 7),
the limited error messages that can be passed back to user space can
get confusing since the default dialect has changed from SMB1 (CIFS) to
more secure SMB3 dialect. Log additional information when the user chooses
to use the default dialects and when the server does not support the
dialect requested.
Signed-off-by: NSteve French <smfrench@gmail.com>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
Acked-by: NPavel Shilovsky <pshilov@microsoft.com>

Pull cifs fixes from Steve French:
 "Two cifs bug fixes for stable"

* tag 'cifs-fixes-for-4.13-rc7-and-stable' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: remove endian related sparse warning
  CIFS: Fix maximum SMB2 header size

Pull block fixes from Jens Axboe:
 "Unfortunately a few issues that warrant sending another pull request,
  even if I had hoped to avoid it. This contains:

   - A fix for multiqueue xen-blkback, on tear down / disconnect.

   - A few fixups for NVMe, including a wrong bit definition, fix for
     host memory buffers, and an nvme rdma page size fix"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvme: fix the definition of the doorbell buffer config support bit
  nvme-pci: use dma memory for the host memory buffer descriptors
  nvme-rdma: default MR page size to 4k
  xen-blkback: stop blkback thread of every queue in xen_blkif_disconnect

Merge tag 'for-4.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - A couple fixes for bugs introduced as part of the blk_status_t block
   layer changes during the 4.13 merge window

 - A printk throttling fix to use discrete rate limiting state for each
   DM log level

 - A stable@ fix for DM multipath that delays request requeueing to
   avoid CPU lockup if/when the request queue is "dying"

* tag 'for-4.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm mpath: do not lock up a CPU with requeuing activity
  dm: fix printk() rate limiting code
  dm mpath: retry BLK_STS_RESOURCE errors
  dm: fix the second dec_pending() argument in __split_and_process_bio()

Merge more fixes from Andrew Morton:
 "6 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  scripts/dtc: fix '%zx' warning
  include/linux/compiler.h: don't perform compiletime_assert with -O0
  mm, madvise: ensure poisoned pages are removed from per-cpu lists
  mm, uprobes: fix multiple free of ->uprobes_state.xol_area
  kernel/kthread.c: kthread_worker: don't hog the cpu
  mm,page_alloc: don't call __node_reclaim() with oom_lock held.

Merge mmu_notifier fixes from Jérôme Glisse:
 "The invalidate_page callback suffered from 2 pitfalls. First it used
  to happen after page table lock was release and thus a new page might
  have been setup for the virtual address before the call to
  invalidate_page().

  This is in a weird way fixed by commit c7ab0d2f ("mm: convert
  try_to_unmap_one() to use page_vma_mapped_walk()") which moved the
  callback under the page table lock. Which also broke several existing
  user of the mmu_notifier API that assumed they could sleep inside this
  callback.

  The second pitfall was invalidate_page being the only callback not
  taking a range of address in respect to invalidation but was giving an
  address and a page. Lot of the callback implementer assumed this could
  never be THP and thus failed to invalidate the appropriate range for
  THP pages.

  By killing this callback we unify the mmu_notifier callback API to
  always take a virtual address range as input.

  There is now two clear API (I am not mentioning the youngess API which
  is seldomly used):

   - invalidate_range_start()/end() callback (which allow you to sleep)

   - invalidate_range() where you can not sleep but happen right after
     page table update under page table lock

  Note that a lot of existing user feels broken in respect to
  range_start/ range_end. Many user only have range_start() callback but
  there is nothing preventing them to undo what was invalidated in their
  range_start() callback after it returns but before any CPU page table
  update take place.

  The code pattern use in kvm or umem odp is an example on how to
  properly avoid such race. In a nutshell use some kind of sequence
  number and active range invalidation counter to block anything that
  might undo what the range_start() callback did.

  If you do not care about keeping fully in sync with CPU page table (ie
  you can live with CPU page table pointing to new different page for a
  given virtual address) then you can take a reference on the pages
  inside the range_start callback and drop it in range_end or when your
  driver is done with those pages.

  Last alternative is to use invalidate_range() if you can do
  invalidation without sleeping as invalidate_range() callback happens
  under the CPU page table spinlock right after the page table is
  updated.

  The first two patches convert existing mmu_notifier_invalidate_page()
  calls to mmu_notifier_invalidate_range() and bracket those call with
  call to mmu_notifier_invalidate_range_start()/end().

  The next ten patches remove existing invalidate_page() callback as it
  can no longer happen.

  Finally the last page remove the invalidate_page() callback completely
  so it can RIP.

  Changes since v1:
   - remove more dead code in kvm (no testing impact)
   - more accurate end address computation (patch 2) in page_mkclean_one
     and try_to_unmap_one
   - added tested-by/reviewed-by gotten so far"

* emailed patches from Jérôme Glisse <jglisse@redhat.com>:
  mm/mmu_notifier: kill invalidate_page
  KVM: update to new mmu_notifier semantic v2
  xen/gntdev: update to new mmu_notifier semantic
  sgi-gru: update to new mmu_notifier semantic
  misc/mic/scif: update to new mmu_notifier semantic
  iommu/intel: update to new mmu_notifier semantic
  iommu/amd: update to new mmu_notifier semantic
  IB/hfi1: update to new mmu_notifier semantic
  IB/umem: update to new mmu_notifier semantic
  drm/amdgpu: update to new mmu_notifier semantic
  powerpc/powernv: update to new mmu_notifier semantic
  mm/rmap: update to new mmu_notifier semantic v2
  dax: update to new mmu_notifier semantic

jfs had previously avoided the use of MAX_LFS_FILESIZE because it hadn't
accounted for the whole 32-bit index range on 32-bit systems.  That has
been fixed by commit 0cc3b0ec ("Clarify (and fix) MAX_LFS_FILESIZE
macros"), so we can simplify the code now.

Suggested by Andreas Dilger.
Signed-off-by: NDave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: NAndreas Dilger <adilger@dilger.ca>
Cc: jfs-discussion@lists.sourceforge.net
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dtc uses an incorrect format specifier for printing a uint64_t value.
uint64_t may be either 'unsigned long' or 'unsigned long long' depending
on the host architecture.

Fix this by using %llx and casting to unsigned long long, which ensures
that we always have a wide enough variable to print 64 bits of hex.

    HOSTCC  scripts/dtc/checks.o
  scripts/dtc/checks.c: In function 'check_simple_bus_reg':
  scripts/dtc/checks.c:876:2: warning: format '%zx' expects argument of type 'size_t', but argument 4 has type 'uint64_t' [-Wformat=]
    snprintf(unit_addr, sizeof(unit_addr), "%zx", reg);
    ^
  scripts/dtc/checks.c:876:2: warning: format '%zx' expects argument of type 'size_t', but argument 4 has type 'uint64_t' [-Wformat=]

Link: http://lkml.kernel.org/r/20170829222034.GJ20805@n2100.armlinux.org.uk
Fixes: 828d4cdd ("dtc: check.c fix compile error")
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>