- 09 3月, 2017 12 次提交
-
-
由 David Ahern 提交于
KASAN detected a use-after-free: [ 269.467067] BUG: KASAN: use-after-free in vrf_xmit+0x7f1/0x827 [vrf] at addr ffff8800350a21c0 [ 269.467067] Read of size 4 by task ssh/1879 [ 269.467067] CPU: 1 PID: 1879 Comm: ssh Not tainted 4.10.0+ #249 [ 269.467067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 269.467067] Call Trace: [ 269.467067] dump_stack+0x81/0xb6 [ 269.467067] kasan_object_err+0x21/0x78 [ 269.467067] kasan_report+0x2f7/0x450 [ 269.467067] ? vrf_xmit+0x7f1/0x827 [vrf] [ 269.467067] ? ip_output+0xa4/0xdb [ 269.467067] __asan_load4+0x6b/0x6d [ 269.467067] vrf_xmit+0x7f1/0x827 [vrf] ... Which corresponds to the skb access after xmit handling. Fix by saving skb->len and using the saved value to update stats. Fixes: 193125db ("net: Introduce VRF device driver") Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarod Wilson 提交于
This restores the ability to set a team device's mtu to anything higher than 1500. Similar to the reported issue with bonding, the team driver calls ether_setup(), which sets an initial max_mtu of 1500, while the underlying hardware can handle something much larger. Just set it to ETH_MAX_MTU to support all possible values, and the limitations of the underlying devices will prevent setting anything too large. Fixes: 91572088 ("net: use core MTU range checking in core net infra") CC: Cong Wang <xiyou.wangcong@gmail.com> CC: Jiri Pirko <jiri@resnulli.us> CC: netdev@vger.kernel.org Signed-off-by: NJarod Wilson <jarod@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Those were supposed to go into the net-next tree not the net tree. Oops... Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christian Lamparter 提交于
Julian Margetson reported a panic on his SAM460EX with Kernel 4.11-rc1: | Unable to handle kernel paging request for data at address 0x00000014 | Oops: Kernel access of bad area, sig: 11 [#1] | PREEMPT | Canyonlands | Modules linked in: | CPU: 0 PID: 1 Comm: swapper Not tainted [...] | task: ea838000 task.stack: ea836000 | NIP: c0599f5c LR: c0599dd8 CTR: 00000000 | REGS: ea837c80 TRAP: 0300 Not tainted [...] | MSR: 00029000 <CE,EE,ME> | CR: 24371242 XER: 20000000 | DEAR: 00000014 ESR: 00000000 | GPR00: c0599ce8 ea837d30 ea838000 c0e52dcc c0d56ffb [...] | NIP [c0599f5c] emac_probe+0xfb4/0x1304 | LR [c0599dd8] emac_probe+0xe30/0x1304 | Call Trace: | [ea837d30] [c0599ce8] emac_probe+0xd40/0x1304 (unreliable) | [ea837d80] [c0533504] platform_drv_probe+0x48/0x90 | [ea837da0] [c0531c14] driver_probe_device+0x15c/0x2c4 | [ea837dd0] [c0531e04] __driver_attach+0x88/0xb0 | ---[ end trace ... ]--- The problem is caused by emac_dt_phy_probe() returing success (0) for existing device-trees configurations that do not specify a "phy-handle" property. This caused the code to skip the existing phy probe and setup. Which led to essential phy related data-structures being uninitialized. This patch also removes the unused variable in emac_dt_phy_connect(). Fixes: a577ca6b ("net: emac: add support for device-tree based PHY discovery and setup") Reported-by: NJulian Margetson <runaway@candw.ms> Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Tested-by: NGeoff Levand <geoff@infradead.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 3月, 2017 27 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec由 David S. Miller 提交于
Steffen Klassert says: ==================== pull request (net): ipsec 2017-03-06 1) Fix lockdep splat on xfrm policy subsystem initialization. From Florian Westphal. 2) When using socket policies on IPv4-mapped IPv6 addresses, we access the flow informations of the wrong address family what leads to an out of bounds access. Fix this by using the family we get with the dst_entry, like we do it for the standard policy lookup. 3) vti6 can report a PMTU below IPV6_MIN_MTU. Fix this by adding a check for that before sending a ICMPV6_PKT_TOOBIG message. Please pull or let me know if there are problems. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
Andrey reported the following kernel crash: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 14446 Comm: syz-executor6 Not tainted 4.10.0+ #82 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88001f311700 task.stack: ffff88001f6e8000 RIP: 0010:ip6mr_sk_done+0x15a/0x3d0 net/ipv6/ip6mr.c:1618 RSP: 0018:ffff88001f6ef418 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 1ffff10003edde8c RCX: ffffc900043ee000 RDX: 0000000000000004 RSI: ffffffff83e3b3f8 RDI: 0000000000000020 RBP: ffff88001f6ef508 R08: fffffbfff0dcc5d8 R09: 0000000000000000 R10: ffffffff86e62ec0 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88001f6ef4e0 R15: ffff8800380a0040 FS: 00007f7a52cec700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000061c500 CR3: 000000001f1ae000 CR4: 00000000000006f0 DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: rawv6_close+0x4c/0x80 net/ipv6/raw.c:1217 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:432 sock_release+0x8d/0x1e0 net/socket.c:597 __sock_create+0x39d/0x880 net/socket.c:1226 sock_create_kern+0x3f/0x50 net/socket.c:1243 inet_ctl_sock_create+0xbb/0x280 net/ipv4/af_inet.c:1526 icmpv6_sk_init+0x163/0x500 net/ipv6/icmp.c:954 ops_init+0x10a/0x550 net/core/net_namespace.c:115 setup_net+0x261/0x660 net/core/net_namespace.c:291 copy_net_ns+0x27e/0x540 net/core/net_namespace.c:396 9pnet_virtio: no channels available for device ./file1 create_new_namespaces+0x437/0x9b0 kernel/nsproxy.c:106 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205 SYSC_unshare kernel/fork.c:2281 [inline] SyS_unshare+0x64e/0x1000 kernel/fork.c:2231 entry_SYSCALL_64_fastpath+0x1f/0xc2 This is because net->ipv6.mr6_tables is not initialized at that point, ip6mr_rules_init() is not called yet, therefore on the error path when we iterator the list, we trigger this oops. Fix this by reordering ip6mr_rules_init() before icmpv6_sk_init(). Reported-by: NAndrey Konovalov <andreyknvl@google.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Dmitry reported crashes in DCCP stack [1] Problem here is that when I got rid of listener spinlock, I missed the fact that DCCP stores a complex state in struct dccp_request_sock, while TCP does not. Since multiple cpus could access it at the same time, we need to add protection. [1] BUG: KASAN: use-after-free in dccp_feat_activate_values+0x967/0xab0 net/dccp/feat.c:1541 at addr ffff88003713be68 Read of size 8 by task syz-executor2/8457 CPU: 2 PID: 8457 Comm: syz-executor2 Not tainted 4.10.0-rc7+ #127 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x292/0x398 lib/dump_stack.c:51 kasan_object_err+0x1c/0x70 mm/kasan/report.c:162 print_address_description mm/kasan/report.c:200 [inline] kasan_report_error mm/kasan/report.c:289 [inline] kasan_report.part.1+0x20e/0x4e0 mm/kasan/report.c:311 kasan_report mm/kasan/report.c:332 [inline] __asan_report_load8_noabort+0x29/0x30 mm/kasan/report.c:332 dccp_feat_activate_values+0x967/0xab0 net/dccp/feat.c:1541 dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121 dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457 dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186 dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279 NF_HOOK include/linux/netfilter.h:257 [inline] ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322 dst_input include/net/dst.h:507 [inline] ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:257 [inline] ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228 process_backlog+0xe5/0x6c0 net/core/dev.c:4839 napi_poll net/core/dev.c:5202 [inline] net_rx_action+0xe70/0x1900 net/core/dev.c:5267 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902 </IRQ> do_softirq.part.17+0x1e8/0x230 kernel/softirq.c:328 do_softirq kernel/softirq.c:176 [inline] __local_bh_enable_ip+0x1f2/0x200 kernel/softirq.c:181 local_bh_enable include/linux/bottom_half.h:31 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:971 [inline] ip6_finish_output2+0xbb0/0x23d0 net/ipv6/ip6_output.c:123 ip6_finish_output+0x302/0x960 net/ipv6/ip6_output.c:148 NF_HOOK_COND include/linux/netfilter.h:246 [inline] ip6_output+0x1cb/0x8d0 net/ipv6/ip6_output.c:162 ip6_xmit+0xcdf/0x20d0 include/net/dst.h:501 inet6_csk_xmit+0x320/0x5f0 net/ipv6/inet6_connection_sock.c:179 dccp_transmit_skb+0xb09/0x1120 net/dccp/output.c:141 dccp_xmit_packet+0x215/0x760 net/dccp/output.c:280 dccp_write_xmit+0x168/0x1d0 net/dccp/output.c:362 dccp_sendmsg+0x79c/0xb10 net/dccp/proto.c:796 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744 sock_sendmsg_nosec net/socket.c:635 [inline] sock_sendmsg+0xca/0x110 net/socket.c:645 SYSC_sendto+0x660/0x810 net/socket.c:1687 SyS_sendto+0x40/0x50 net/socket.c:1655 entry_SYSCALL_64_fastpath+0x1f/0xc2 RIP: 0033:0x4458b9 RSP: 002b:00007f8ceb77bb58 EFLAGS: 00000282 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000017 RCX: 00000000004458b9 RDX: 0000000000000023 RSI: 0000000020e60000 RDI: 0000000000000017 RBP: 00000000006e1b90 R08: 00000000200f9fe1 R09: 0000000000000020 R10: 0000000000008010 R11: 0000000000000282 R12: 00000000007080a8 R13: 0000000000000000 R14: 00007f8ceb77c9c0 R15: 00007f8ceb77c700 Object at ffff88003713be50, in cache kmalloc-64 size: 64 Allocated: PID = 8446 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57 save_stack+0x43/0xd0 mm/kasan/kasan.c:502 set_track mm/kasan/kasan.c:514 [inline] kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:605 kmem_cache_alloc_trace+0x82/0x270 mm/slub.c:2738 kmalloc include/linux/slab.h:490 [inline] dccp_feat_entry_new+0x214/0x410 net/dccp/feat.c:467 dccp_feat_push_change+0x38/0x220 net/dccp/feat.c:487 __feat_register_sp+0x223/0x2f0 net/dccp/feat.c:741 dccp_feat_propagate_ccid+0x22b/0x2b0 net/dccp/feat.c:949 dccp_feat_server_ccid_dependencies+0x1b3/0x250 net/dccp/feat.c:1012 dccp_make_response+0x1f1/0xc90 net/dccp/output.c:423 dccp_v6_send_response+0x4ec/0xc20 net/dccp/ipv6.c:217 dccp_v6_conn_request+0xaba/0x11b0 net/dccp/ipv6.c:377 dccp_rcv_state_process+0x51e/0x1650 net/dccp/input.c:606 dccp_v6_do_rcv+0x213/0x350 net/dccp/ipv6.c:632 sk_backlog_rcv include/net/sock.h:893 [inline] __sk_receive_skb+0x36f/0xcc0 net/core/sock.c:479 dccp_v6_rcv+0xba5/0x1d00 net/dccp/ipv6.c:742 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279 NF_HOOK include/linux/netfilter.h:257 [inline] ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322 dst_input include/net/dst.h:507 [inline] ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:257 [inline] ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228 process_backlog+0xe5/0x6c0 net/core/dev.c:4839 napi_poll net/core/dev.c:5202 [inline] net_rx_action+0xe70/0x1900 net/core/dev.c:5267 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284 Freed: PID = 15 save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57 save_stack+0x43/0xd0 mm/kasan/kasan.c:502 set_track mm/kasan/kasan.c:514 [inline] kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:578 slab_free_hook mm/slub.c:1355 [inline] slab_free_freelist_hook mm/slub.c:1377 [inline] slab_free mm/slub.c:2954 [inline] kfree+0xe8/0x2b0 mm/slub.c:3874 dccp_feat_entry_destructor.part.4+0x48/0x60 net/dccp/feat.c:418 dccp_feat_entry_destructor net/dccp/feat.c:416 [inline] dccp_feat_list_pop net/dccp/feat.c:541 [inline] dccp_feat_activate_values+0x57f/0xab0 net/dccp/feat.c:1543 dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121 dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457 dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186 dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711 ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279 NF_HOOK include/linux/netfilter.h:257 [inline] ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322 dst_input include/net/dst.h:507 [inline] ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:257 [inline] ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203 __netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190 __netif_receive_skb+0x2a/0x170 net/core/dev.c:4228 process_backlog+0xe5/0x6c0 net/core/dev.c:4839 napi_poll net/core/dev.c:5202 [inline] net_rx_action+0xe70/0x1900 net/core/dev.c:5267 __do_softirq+0x2fb/0xb7d kernel/softirq.c:284 Memory state around the buggy address: ffff88003713bd00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88003713bd80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88003713be00: fc fc fc fc fc fc fc fc fc fc fb fb fb fb fb fb ^ Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Tested-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Falcon 提交于
The amount of TX/RX buffers that the vNIC driver currently allocates is different from the amount agreed upon in negotiation with firmware. Correct that by allocating the requested number of buffers confirmed by firmware. Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Falcon 提交于
Use a counter to track the number of outstanding transmissions sent that have not received completions. If the counter reaches the maximum number of queue entries, stop transmissions on that queue. As we receive more completions from firmware, wake the queue once the counter reaches an acceptable level. This patch prevents hardware/firmware TX queue from filling up and and generating errors. Since incorporating this fix, internal testing has reported that these firmware errors have stopped. Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Khoroshilov 提交于
Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sowmini Varadhan says: ==================== rds: tcp: fix various rds-tcp issues during netns create/delete sequences Dmitry Vyukov reported some syszkaller panics during netns deletion. While I have not been able to reproduce those exact panics, my attempts to do so uncovered a few other problems, which are fixed patch 2 and patch 3 of this patch series. In addition, as mentioned in, https://www.spinics.net/lists/netdev/msg422997.html code-inspection points that the rds_connection needs to take an explicit refcnt on the struct net so that it is held down until all cleanup is completed for netns removal, and this is fixed by patch1. The following scripts were run concurrently to uncover/test patch{2, 3} while simultaneously running rds-ping to 12.0.0.18 from another system: # cat del.rds while [ 1 ]; do modprobe rds_tcp modprobe -r rds-tcp done # cat del.netns while [ 1 ]; do ip netns delete blue ip netns add blue ip link add link eth1 address a:b:c:d:e:f blue0 type macvlan ip link set blue0 netns blue ip netns exec blue ip addr add 12.0.0.18/24 dev blue0 ip netns exec blue ifconfig blue0 up sleep 3; done ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
Commit a93d01f5 ("RDS: TCP: avoid bad page reference in rds_tcp_listen_data_ready") added the function rds_tcp_listen_sock_def_readable() to handle the case when a partially set-up acceptor socket drops into rds_tcp_listen_data_ready(). However, if the listen socket (rtn->rds_tcp_listen_sock) is itself going through a tear-down via rds_tcp_listen_stop(), the (*ready)() will be null and we would hit a panic of the form BUG: unable to handle kernel NULL pointer dereference at (null) IP: (null) : ? rds_tcp_listen_data_ready+0x59/0xb0 [rds_tcp] tcp_data_queue+0x39d/0x5b0 tcp_rcv_established+0x2e5/0x660 tcp_v4_do_rcv+0x122/0x220 tcp_v4_rcv+0x8b7/0x980 : In the above case, it is not fatal to encounter a NULL value for ready- we should just drop the packet and let the flush of the acceptor thread finish gracefully. In general, the tear-down sequence for listen() and accept() socket that is ensured by this commit is: rtn->rds_tcp_listen_sock = NULL; /* prevent any new accepts */ In rds_tcp_listen_stop(): serialize with, and prevent, further callbacks using lock_sock() flush rds_wq flush acceptor workq sock_release(listen socket) Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
Order of initialization in rds_tcp_init needs to be done so that resources are set up and destroyed in the correct synchronization sequence with both the data path, as well as netns create/destroy path. Specifically, - we must call register_pernet_subsys and get the rds_tcp_netid before calling register_netdevice_notifier, otherwise we risk the sequence 1. register_netdevice_notifier sets up netdev notifier callback 2. rds_tcp_dev_event -> rds_tcp_kill_sock uses netid 0, and finds the wrong rtn, resulting in a panic with string that is of the form: BUG: unable to handle kernel NULL pointer dereference at 000000000000000d IP: rds_tcp_kill_sock+0x3a/0x1d0 [rds_tcp] : - the rds_tcp_incoming_slab kmem_cache must be initialized before the datapath starts up. The latter can happen any time after the pernet_subsys registration of rds_tcp_net_ops, whose -> init function sets up the listen socket. If the rds_tcp_incoming_slab has not been set up at that time, a panic of the form below may be encountered BUG: unable to handle kernel NULL pointer dereference at 0000000000000014 IP: kmem_cache_alloc+0x90/0x1c0 : rds_tcp_data_recv+0x1e7/0x370 [rds_tcp] tcp_read_sock+0x96/0x1c0 rds_tcp_recv_path+0x65/0x80 [rds_tcp] : Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
It is incorrect for the rds_connection to piggyback on the sock_net() refcount for the netns because this gives rise to a chicken-and-egg problem during rds_conn_destroy. Instead explicitly take a ref on the net, and hold the netns down till the connection tear-down is complete. Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Eric Dumazet says: ==================== net: fix possible sock_hold() misuses skb_complete_wifi_ack() and skb_complete_tx_timestamp() currently call sock_hold() on sockets that might have transitioned their sk_refcnt to zero already. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
TX skbs do not necessarily hold a reference on skb->sk->sk_refcnt By the time TX completion happens, sk_refcnt might be already 0. sock_hold()/sock_put() would then corrupt critical state, like sk_wmem_alloc and lead to leaks or use after free. Fixes: 62bccb8c ("net-timestamp: Make the clone operation stand-alone from phy timestamping") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
TX skbs do not necessarily hold a reference on skb->sk->sk_refcnt By the time TX completion happens, sk_refcnt might be already 0. sock_hold()/sock_put() would then corrupt critical state, like sk_wmem_alloc. Fixes: bf7fa551 ("mac80211: Resolve sk_refcnt/sk_wmem_alloc issue in wifi ack path") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Howells 提交于
The call state may be changed at any time by the data-ready routine in response to received packets, so if the call state is to be read and acted upon several times in a function, READ_ONCE() must be used unless the call state lock is held. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Dmitry Vyukov reported a divide by 0 triggered by syzkaller, exploiting tcp_disconnect() path that was never really considered and/or used before syzkaller ;) I was not able to reproduce the bug, but it seems issues here are the three possible actions that assumed they would never trigger on a listener. 1) tcp_write_timer_handler 2) tcp_delack_timer_handler 3) MTU reduction Only IPv6 MTU reduction was properly testing TCP_CLOSE and TCP_LISTEN states from tcp_v6_mtu_reduced() Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Michal Schmidt says: ==================== bnx2x: PTP crash, VF VLAN fixes here are fixes for a crash with PTP, a crash in setting of VF multicast addresses, and non-working VLAN filters configuration from the VF side. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
Configuring VLANs from the VF side had no effect, because the PF ignored filters of type VFPF_VLAN_FILTER in the VF-PF message. Add the missing filter type to configure. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
filters->count is the number of filters we were supposed to configure. There is no reason to increase it by +1 when printing the count in an error message. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
On failure to configure a VF MAC/VLAN filter we should not attempt to rollback filters that we failed to configure with -EEXIST. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
VFs are currently missing the VLAN filtering feature, because we were checking the PF's acquire response before actually performing the acquire. Fix it by setting the feature flag later when we have the PF response. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
It is too late to check for the limit of the number of VF multicast addresses after they have already been copied to the req->multicast[] array, possibly overflowing it. Do the check before copying. Also fix the error path to not skip unlocking vf2pf_mutex. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
When BNX2X_MSG_IOV is enabled, the driver produces too many VF statistics messages. Lower the verbosity of the VF stats messages similarly as in commit 76ca70fa ("bnx2x: [Debug] change verbosity of some prints"). Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
It is possible to crash the kernel by accessing a PTP device while its associated bnx2x interface is down. Before the interface is brought up, the timecounter is not initialized, so accessing it results in NULL dereference. Fix it by checking if the interface is up. Use -ENETDOWN as the error code when the interface is down. -EFAULT in bnx2x_ptp_adjfreq() did not seem right. Tested using phc_ctl get/set/adj/freq commands. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Blomme, Maarten 提交于
Signed-off-by: NMaarten Blomme <Maarten.Blomme@flir.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Blomme, Maarten 提交于
Signed-off-by: NMaarten Blomme <Maarten.Blomme@flir.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
The ethernet support now calls directly into the ipv6 core code, which fails if IPV6 is a loadable module but mlx5 is built-in: drivers/net/ethernet/mellanox/mlx5/core/en_tc.o: In function `mlx5e_create_encap_header_ipv6': en_tc.c:(.text.mlx5e_create_encap_header_ipv6+0x110): undefined reference to `ip6_route_output_flags' This adds a dependency to ensure that MLX5_CORE_EN can only be built if we are able link the kernel successfully. The downside is that the ethernet option can be hidden. Alternatively we could make MLX5_CORE depend on "IPV6 || !IPV6", which would force MLX5_CORE to be a module when IPV6 is, including in configurations where we don't use the ethernet support at all. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christian Lamparter 提交于
This patch adds documentation for a new "phy-handle" property, "fixed-link" and "mdio" sub-node. These allows the enumeration of PHYs which are supported by the phy library under drivers/net/phy. The EMAC ethernet controller in IBM and AMCC 4xx chips is currently stuck with a few privately defined phy implementations. It has no support for PHYs which are supported by the generic phylib. Acked-by: NRob Herring <robh@kernel.org> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 3月, 2017 1 次提交
-
-
由 Florian Fainelli 提交于
The Generic PHY driver is a catch-all PHY driver and it should preserve whatever prior initialization has been done by boot loader or firmware agents. For specific PHY device configuration it is expected that a specialized PHY driver would take over that role. Resetting the generic PHY was a bad idea that has lead to several complaints and downstream workarounds e.g: in OpenWrt/LEDE so restore the behavior prior to 87aa9f9c ("net: phy: consolidate PHY reset in phy_init_hw()"). Reported-by: NFelix Fietkau <nbd@nbd.name> Fixes: 87aa9f9c ("net: phy: consolidate PHY reset in phy_init_hw()") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-