- 14 1月, 2017 7 次提交
-
-
由 Ganesh Goudar 提交于
Do not count pause frames as part of general TX/RX frame counters. Based on the original work of Casey Leedom <leedom@chelsio.com> Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add the ulp_sriov_cfg callbacks when the number of VFs is changing. This allows the RDMA driver to provision RDMA resources for the VFs. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add LED blinking code to support ethtool -p on the PF. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Commit bdbd1eb5 ("bnxt_en: Handle no aggregation ring gracefully.") introduced the BNXT_FLAG_NO_AGG_RINGS flag. For consistency, bnxt_set_tpa_flags() should also clear TPA flags when there are no aggregation rings. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
CC [M] drivers/net/ethernet/broadcom/bnxt/bnxt.o drivers/net/ethernet/broadcom/bnxt/bnxt.c:4947:21: warning: ‘bnxt_get_max_func_rss_ctxs’ defined but not used [-Wunused-function] static unsigned int bnxt_get_max_func_rss_ctxs(struct bnxt *bp) ^ CC [M] drivers/net/ethernet/broadcom/bnxt/bnxt.o drivers/net/ethernet/broadcom/bnxt/bnxt.c:4956:21: warning: ‘bnxt_get_max_func_vnics’ defined but not used [-Wunused-function] static unsigned int bnxt_get_max_func_vnics(struct bnxt *bp) ^ Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satanand Burla 提交于
Remove assignment to ndo_select_queue so that fallback is used for selecting txq. Also remove the now-useless function that used to be assigned to ndo_select_queue. Signed-off-by: NSatanand Burla <satananda.burla@cavium.com> Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com> Signed-off-by: NDerek Chickles <derek.chickles@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 1月, 2017 3 次提交
-
-
由 Prasad Kanneganti 提交于
Reduce the load time of the VF driver by decreasing the wait time between iterations of the loop that polls for a mailbox response from the PF. Also change the wait time units from jiffies to milliseconds. Signed-off-by: NPrasad Kanneganti <prasad.kanneganti@cavium.com> Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com> Signed-off-by: NRaghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: NDerek Chickles <derek.chickles@cavium.com> Signed-off-by: NSatanand Burla <satananda.burla@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Felix Manlunas 提交于
Remove code that's no longer needed. It used to serve a purpose, which was to fix a link-related bug. For a while now, the NIC firmware has had a more elegant fix for that bug. Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com> Signed-off-by: NDerek Chickles <derek.chickles@cavium.com> Signed-off-by: NSatanand Burla <satananda.burla@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
commit bc1f4470 ("net: make ndo_get_stats64 a void function") mistakenly used a return value for this void conversion. Fix it. Signed-off-by: NJoe Perches <joe@perches.com> cc: stephen hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 1月, 2017 4 次提交
-
-
由 Ganesh Goudar 提交于
Initialize mbox lock and list for mgmt dev to avoid NULL pointer dereference when cxgb_set_vf_mac is called. And also allocate memory for private data while allocating mgmt netdev. Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert Richter 提交于
>From struct ethtool_ops: int (*set_rxfh)(struct net_device *, const u32 *indir, const u8 *key, const u8 hfunc); Change function arg of hfunc to const type. V2: Fixed indentation. Signed-off-by: NRobert Richter <rrichter@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 712c3185 ("net: thunderx: Program LMAC credits based on MTU") Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Fixes the following sparse warning: drivers/net/ethernet/sfc/efx.c:2337:5: warning: symbol 'efx_get_phys_port_id' was not declared. Should it be static? Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 1月, 2017 18 次提交
-
-
由 Keerthy 提交于
Commit: bc1f4470 - net: make ndo_get_stats64 a void function and Commit: 6a8162e9 - net: netcp: store network statistics in 64 bits. The commit 6a8162e9 adds ndo_get_stats64 function as per old signature which causes compilation error: drivers/net/ethernet/ti/netcp_core.c:1951:28: error: initialization from incompatible pointer type .ndo_get_stats64 = netcp_get_stats, Hence correct netcp_get_stats function signature as per the latest definition. Signed-off-by: NKeerthy <j-keerthy@ti.com> Fixes: 6a8162e9 ("net: netcp: store network statistics in 64 bits") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Jurgens 提交于
Do not attempt to drain the health workqueue when unloading the device in the recovery flow, this can cause a deadlock when the recovery work tries to cancel itself with sync. Because the work is no longer unconditionally canceled when unloading, it must be explicitly canceled in the AER flow. fixes: 689a248d ("net/mlx5: Cancel recovery work in remove flow") Signed-off-by: NDaniel Jurgens <danielj@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gil Rockah 提交于
When trying to do interface down or changing interface configuration under heavy traffic, some of the adaptive moderation corner cases can occur and leave a WARN_ONCE call trace in the kernel log. Those WARN_ONCE are meant for debug only, and should have been inserted only under debug. We avoid such call traces by removing those WARN_ONCE. Fixes: cb3c7fd4 ("net/mlx5e: Support adaptive RX coalescing") Signed-off-by: NGil Rockah <gilr@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
The code before this patch registered uplink e-Switch representor on nic_enable and unregistered on nic_cleanup, the right place for this unregister is in nic_disable. Fixes: 127ea380 ("net/mlx5: Add Representors registration API") Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NMohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
When the firmware returns an error (common example is an attempt to add twice the same rule which is refused by the some FWs), we are not properly derefing/cleaning few resources allocated on the way. Examples are vport vlan deref under eswitch vlan offloads, and encap entry/neighbour deref under eswitch encapsulation offloads, fix that. Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Fixes: 8b32580d ('net/mlx5e: Add TC vlan action for SRIOV offloads') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NRoi Dayan <roid@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hadar Hen Zion 提交于
kbuild warn about parameters that may be used uninitialized, fix it. Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
For e-switch level matching on packets being an IP fragment, we need to make sure the source vport inline mode is L3, fix that. Fixes: 3f7d0eb4 ('net/mlx5e: Offload TC matching on packets being IP fragments') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NRoi Dayan <roid@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
As done elsewhere in our TC/flower offload code, the address type of the encapsulation IP headers should be realized accroding to the addr_type field of the encapsulation control dissector key, do that. Fixes: bbd00f7e ('net/mlx5e: Add TC tunnel release action for SRIOV offloads') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
When the route lookup fails we should return the actual error. When the neigh isn't valid, we should return -EOPNOTSUPP as done in similar cases along the code. When the offload can't take place as of invalid neigh etc, we must release the neigh. Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
We silently reject offloading of IPv6 tunnels, non vxlan tunnels, vxlan tunnels where the dst port to match is not provided, etc. Be a bit more verbose and print a warning so the user better realizes what went wrong here and can fix it. Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Fixes: bbd00f7e ('net/mlx5e: Add TC tunnel release action for SRIOV offloads') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
We can offload the matching on source udp port of ip tunnels for decapsulation. We can not offload setting source udp port for tunnels as part of encapsulation. Fix both the code that deals with matching offload (decap) and the code that deal with encap offload to align with that. Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Fixes: bbd00f7e ('net/mlx5e: Add TC tunnel release action for SRIOV offloads') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch does two things. First it goes through and renames the __page_frag prefixed functions to __page_frag_cache so that we can be clear that we are draining or refilling the cache, not the frags themselves. Second we drop the order parameter from __page_frag_cache_drain since we don't actually need to pass it since all fragments are either order 0 or must be a compound page. Link: http://lkml.kernel.org/r/20170104023954.13451.5678.stgit@localhost.localdomainSigned-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Martin KaFai Lau 提交于
In commit b45f0674 ("mlx4: xdp: Allow raising MTU up to one page minus eth and vlan hdrs"), it changed EOPNOTSUPP to ENOTSUPP by mistake. This patch fixes it. Fixes: b45f0674 ("mlx4: xdp: Allow raising MTU up to one page minus eth and vlan hdrs") Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Acked-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Prasad Kanneganti 提交于
Store the L4 hash of received packets in the skb; the hash is computed in the NIC firmware. Signed-off-by: NPrasad Kanneganti <prasad.kanneganti@cavium.com> Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com> Signed-off-by: NDerek Chickles <derek.chickles@cavium.com> Signed-off-by: NSatanand Burla <satananda.burla@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bert Kenward 提交于
Setting dev_port changes the device names allocated by systemd. Any devices with a dev_port >0 will (in default distro configurations) have a suffix of "d<port-number>" appended. This is not something done by other drivers, and causes confusion for users. Fixes: 8be41320 ("sfc: Add code to export port_num in netdev->dev_port") Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bert Kenward 提交于
Output is of the form p<port-number>. Note that the port numbers don't necessarily map one-to-one to physical cages, partly because of 4x10G port modes on QSFP+ and partly because of hw/fw implementation details. Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bert Kenward 提交于
There's no good reason why this should be an SRIOV-only thing. Thus, also move it out of SRIOV-specific files. Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Timur Tabi 提交于
Add support for some ethtool methods: get/set link settings, get/set message level, get statistics, get link status, get ring params, get pause params, and restart autonegotiation. The code to collect the hardware statistics is moved into its own function so that it can be used by "get statistics" method. Signed-off-by: NTimur Tabi <timur@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 1月, 2017 8 次提交
-
-
由 Niklas Söderlund 提交于
This is based on public datasheet for sh7763 which shows it has the same behavior and registers for WoL as other versions of sh_eth. Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Niklas Söderlund 提交于
This is based on public datasheet for sh7734 which shows it has the same behavior and registers for WoL as other versions of sh_eth. Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Niklas Söderlund 提交于
Geert Uytterhoeven reported WoL worked on his Armadillo board. Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Niklas Söderlund 提交于
Tested on Gen2 r8a7791/Koelsch. Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Niklas Söderlund 提交于
Add generic functionality to support Wake-on-LAN using MagicPacket which are supported by at least a few versions of sh_eth. Only add functionality for WoL, no specific sh_eth versions are marked to support WoL yet. WoL is enabled in the suspend callback by setting MagicPacket detection and disabling all interrupts expect MagicPacket. In the resume path the driver needs to reset the hardware to rearm the WoL logic, this prevents the driver from simply restoring the registers and to take advantage of that sh_eth was not suspended to reduce resume time. To reset the hardware the driver closes and reopens the device just like it would do in a normal suspend/resume scenario without WoL enabled, but it both closes and opens the device in the resume callback since the device needs to be open for WoL to work. One quirk needed for WoL is that the module clock needs to be prevented from being switched off by Runtime PM. To keep the clock alive the suspend callback need to call clk_enable() directly to increase the usage count of the clock. Then when Runtime PM decreases the clock usage count it won't reach 0 and be switched off. Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Niklas Söderlund 提交于
This bit was wrongly named due to a typo, Sergei checked the SH7734/63 manuals and this bit should be named MPDE. Suggested-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
The 'struct sh_eth_cpu_data' field indicating the "intelligent checksum" support was misnamed 'hw_crc' -- rename it to 'hw_checksum'. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
After checking all the available manuals, I have enough information to conclude that the 'shift_rd0' flag is only relevant for the Ether cores supporting so called "intelligent checksum" (and hence having CSMR) which is indicated by the 'hw_crc' flag. Since all the relevant SoCs now have both these flags set, we can at last get rid of the former flag... Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-