1. 05 8月, 2014 1 次提交
    • L
      Merge tag 'pci-v3.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci · f74ad8df
      Linus Torvalds 提交于
      Pull PCI updates from Bjorn Helgaas:
       "I'll be on vacation until Aug 11, and I suspect the merge window will
        open before then, so I'm sending this to you early.  There are more
        things I'd like to get into v3.17, so I hope to send another pull
        request soon after I return.
      
        The most notable pieces here are:
      
         - Support BARs up to 128GB (up from 8GB)
         - Fix SR-IOV resource assignment when we fail to expand a resource
         - Rework pciehp to handle a common hardware erratum
         - Cleanup MSI
         - Fix NIC renaming issue
         - Fix VGA default device issue on EFI systems
         - Fix ASPM configuration (previously we didn't enable it as expected)
      
        Alex Williamson has graciously agreed to take care of any major issues
        with this if you take it before I return.
      
        Details:
      
        Resource management
          - Support BAR sizes up to 128GB (Yinghai Lu)
          - Keep original resource if we fail to expand it (Guo Chao)
          - Return conventional error values from pci_revert_fw_address() (Bjorn Helgaas)
          - Tidy resource assignment messages (Bjorn Helgaas)
          - Don't exclude low BIOS area for non-PCI cards (Christoph Schulz)
      
        PCI device hotplug
          - Prevent NULL dereference during pciehp probe (Andreas Noever)
          - Make pciehp pcie_wait_cmd() self-contained (Bjorn Helgaas)
          - Wait for pciehp hotplug command completion lazily (Bjorn Helgaas)
          - Compute pciehp timeout from hotplug command start time (Bjorn Helgaas)
          - Remove pciehp assumptions about which commands cause completion events (Bjorn Helgaas)
          - Clear pciehp Data Link Layer State Changed during init (Myron Stowe)
          - Remove pciehp struct controller.no_cmd_complete (Rajat Jain)
          - Remove cpqphp unnecessary null test (Fabian Frederick)
          - Remove "invalid IRQ" warning for hot-added PCIe ports (Jiang Liu)
      
        IOMMU
          - Add DMA alias quirk for Intel 82801 bridge (Alex Williamson)
      
        MSI
          - Add internal msix_clear_and_set_ctrl() (Yijing Wang)
          - Remove unused msi_enabled_mask() (Yijing Wang)
          - Cache Multiple Message Capable in struct msi_desc (Yijing Wang)
          - Add msi_setup_entry() to clean up initialization (Yijing Wang)
          - Remove unused msi_remove_pci_irq_vectors() (Yijing Wang)
          - Retrieve first MSI IRQ from msi_desc rather than pci_dev (Yijing Wang)
          - Remove unused list access in __pci_restore_msix_state() (Yijing Wang)
          - Use irq_get_msi_desc() to simplify code (Yijing Wang)
      
        Generic host bridge driver
          - Fix GPL v2 license string typo (Bjorn Helgaas)
      
        Marvell MVEBU
          - Fix GPL v2 license string typo (Thierry Reding)
      
        NVIDIA Tegra
          - Use correct initial HW settings (Phil Edworthy)
          - Remove rcar_pcie_setup_window() resource argument (Phil Edworthy)
          - Fix GPL v2 license string typo (Thierry Reding)
      
        Renesas R-Car
          - Remove redundant config accessor register checks (Sergei Shtylyov)
          - Fix GPL v2 license string typo (Bjorn Helgaas)
      
        Virtualization
          - Factor secondary bus reset logic (Gavin Shan)
          - Remove duplicate powerpc reset logic (Gavin Shan)
      
        Miscellaneous
          - Rework default VGA detection for EFI (Bruno Prémont)
          - Fix sysfs "acpi_index" and "label" errors for NIC renaming (Simone Gotti)
          - Configure ASPM at pci_enable_device()-time (Vidya Sagar)
          - Add include/linux/pci_ids.h include guard (Rasmus Villemoes)"
      
      * tag 'pci-v3.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (38 commits)
        PCI/MSI: Use irq_get_msi_desc() to simplify code
        PCI/MSI: Remove unused list access in __pci_restore_msix_state()
        PCI/MSI: Retrieve first MSI IRQ from msi_desc rather than pci_dev
        PCI/MSI: Remove unused function msi_remove_pci_irq_vectors()
        PCI/MSI: Add msi_setup_entry() to clean up MSI initialization
        PCI: Configure ASPM when enabling device
        x86: don't exclude low BIOS area when allocating address space for non-PCI cards
        PCI: generic: Fix GPL v2 license string typo
        PCI: rcar: Fix GPL v2 license string typo
        PCI: tegra: Fix GPL v2 license string typo
        PCI: mvebu: Fix GPL v2 license string typo
        PCI: Add include guard to include/linux/pci_ids.h
        x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()
        PCI: Tidy resource assignment messages
        PCI: Return conventional error values from pci_revert_fw_address()
        PCI: Cleanup control flow
        PCI: Support BAR sizes up to 128GB
        PCI: cpqphp: Remove unnecessary null test before debugfs_remove()
        PCI: pciehp: Clear Data Link Layer State Changed during init
        PCI: Add bridge DMA alias quirk for Intel 82801 bridge
        ...
      f74ad8df
  2. 04 8月, 2014 2 次提交
  3. 03 8月, 2014 1 次提交
    • L
      Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm · 3f9c08f7
      Linus Torvalds 提交于
      Pull ARM fixes from Russell King:
       "A few fixes for ARM.  Some of these are correctness issues:
         - TLBs must be flushed after the old mappings are removed by the DMA
           mapping code, but before the new mappings are established.
         - An off-by-one entry error in the Keystone LPAE setup code.
      
        Fixes include:
         - ensuring that the identity mapping for LPAE does not remove the
           kernel image from the identity map.
         - preventing userspace from trapping into kgdb.
         - fixing a preemption issue in the Intel iwmmxt code.
         - fixing a build error with nommu.
      
        Other changes include:
         - Adding a note about which areas of memory are expected to be
           accessible while the identity mapping tables are in place"
      
      * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
        ARM: 8124/1: don't enter kgdb when userspace executes a kgdb break instruction
        ARM: idmap: add identity mapping usage note
        ARM: 8115/1: LPAE: reduce damage caused by idmap to virtual memory layout
        ARM: fix alignment of keystone page table fixup
        ARM: 8112/1: only select ARM_PATCH_PHYS_VIRT if MMU is enabled
        ARM: 8100/1: Fix preemption disable in iwmmxt_task_enable()
        ARM: DMA: ensure that old section mappings are flushed from the TLB
      3f9c08f7
  4. 02 8月, 2014 9 次提交
  5. 01 8月, 2014 7 次提交
    • J
      timer: Fix lock inversion between hrtimer_bases.lock and scheduler locks · 504d5874
      Jan Kara 提交于
      clockevents_increase_min_delta() calls printk() from under
      hrtimer_bases.lock. That causes lock inversion on scheduler locks because
      printk() can call into the scheduler. Lockdep puts it as:
      
      ======================================================
      [ INFO: possible circular locking dependency detected ]
      3.15.0-rc8-06195-g939f04be #2 Not tainted
      -------------------------------------------------------
      trinity-main/74 is trying to acquire lock:
       (&port_lock_key){-.....}, at: [<811c60be>] serial8250_console_write+0x8c/0x10c
      
      but task is already holding lock:
       (hrtimer_bases.lock){-.-...}, at: [<8103caeb>] hrtimer_try_to_cancel+0x13/0x66
      
      which lock already depends on the new lock.
      
      the existing dependency chain (in reverse order) is:
      
      -> #5 (hrtimer_bases.lock){-.-...}:
             [<8104a942>] lock_acquire+0x92/0x101
             [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
             [<8103c918>] __hrtimer_start_range_ns+0x1c/0x197
             [<8107ec20>] perf_swevent_start_hrtimer.part.41+0x7a/0x85
             [<81080792>] task_clock_event_start+0x3a/0x3f
             [<810807a4>] task_clock_event_add+0xd/0x14
             [<8108259a>] event_sched_in+0xb6/0x17a
             [<810826a2>] group_sched_in+0x44/0x122
             [<81082885>] ctx_sched_in.isra.67+0x105/0x11f
             [<810828e6>] perf_event_sched_in.isra.70+0x47/0x4b
             [<81082bf6>] __perf_install_in_context+0x8b/0xa3
             [<8107eb8e>] remote_function+0x12/0x2a
             [<8105f5af>] smp_call_function_single+0x2d/0x53
             [<8107e17d>] task_function_call+0x30/0x36
             [<8107fb82>] perf_install_in_context+0x87/0xbb
             [<810852c9>] SYSC_perf_event_open+0x5c6/0x701
             [<810856f9>] SyS_perf_event_open+0x17/0x19
             [<8142f8ee>] syscall_call+0x7/0xb
      
      -> #4 (&ctx->lock){......}:
             [<8104a942>] lock_acquire+0x92/0x101
             [<8142f04c>] _raw_spin_lock+0x21/0x30
             [<81081df3>] __perf_event_task_sched_out+0x1dc/0x34f
             [<8142cacc>] __schedule+0x4c6/0x4cb
             [<8142cae0>] schedule+0xf/0x11
             [<8142f9a6>] work_resched+0x5/0x30
      
      -> #3 (&rq->lock){-.-.-.}:
             [<8104a942>] lock_acquire+0x92/0x101
             [<8142f04c>] _raw_spin_lock+0x21/0x30
             [<81040873>] __task_rq_lock+0x33/0x3a
             [<8104184c>] wake_up_new_task+0x25/0xc2
             [<8102474b>] do_fork+0x15c/0x2a0
             [<810248a9>] kernel_thread+0x1a/0x1f
             [<814232a2>] rest_init+0x1a/0x10e
             [<817af949>] start_kernel+0x303/0x308
             [<817af2ab>] i386_start_kernel+0x79/0x7d
      
      -> #2 (&p->pi_lock){-.-...}:
             [<8104a942>] lock_acquire+0x92/0x101
             [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
             [<810413dd>] try_to_wake_up+0x1d/0xd6
             [<810414cd>] default_wake_function+0xb/0xd
             [<810461f3>] __wake_up_common+0x39/0x59
             [<81046346>] __wake_up+0x29/0x3b
             [<811b8733>] tty_wakeup+0x49/0x51
             [<811c3568>] uart_write_wakeup+0x17/0x19
             [<811c5dc1>] serial8250_tx_chars+0xbc/0xfb
             [<811c5f28>] serial8250_handle_irq+0x54/0x6a
             [<811c5f57>] serial8250_default_handle_irq+0x19/0x1c
             [<811c56d8>] serial8250_interrupt+0x38/0x9e
             [<810510e7>] handle_irq_event_percpu+0x5f/0x1e2
             [<81051296>] handle_irq_event+0x2c/0x43
             [<81052cee>] handle_level_irq+0x57/0x80
             [<81002a72>] handle_irq+0x46/0x5c
             [<810027df>] do_IRQ+0x32/0x89
             [<8143036e>] common_interrupt+0x2e/0x33
             [<8142f23c>] _raw_spin_unlock_irqrestore+0x3f/0x49
             [<811c25a4>] uart_start+0x2d/0x32
             [<811c2c04>] uart_write+0xc7/0xd6
             [<811bc6f6>] n_tty_write+0xb8/0x35e
             [<811b9beb>] tty_write+0x163/0x1e4
             [<811b9cd9>] redirected_tty_write+0x6d/0x75
             [<810b6ed6>] vfs_write+0x75/0xb0
             [<810b7265>] SyS_write+0x44/0x77
             [<8142f8ee>] syscall_call+0x7/0xb
      
      -> #1 (&tty->write_wait){-.....}:
             [<8104a942>] lock_acquire+0x92/0x101
             [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
             [<81046332>] __wake_up+0x15/0x3b
             [<811b8733>] tty_wakeup+0x49/0x51
             [<811c3568>] uart_write_wakeup+0x17/0x19
             [<811c5dc1>] serial8250_tx_chars+0xbc/0xfb
             [<811c5f28>] serial8250_handle_irq+0x54/0x6a
             [<811c5f57>] serial8250_default_handle_irq+0x19/0x1c
             [<811c56d8>] serial8250_interrupt+0x38/0x9e
             [<810510e7>] handle_irq_event_percpu+0x5f/0x1e2
             [<81051296>] handle_irq_event+0x2c/0x43
             [<81052cee>] handle_level_irq+0x57/0x80
             [<81002a72>] handle_irq+0x46/0x5c
             [<810027df>] do_IRQ+0x32/0x89
             [<8143036e>] common_interrupt+0x2e/0x33
             [<8142f23c>] _raw_spin_unlock_irqrestore+0x3f/0x49
             [<811c25a4>] uart_start+0x2d/0x32
             [<811c2c04>] uart_write+0xc7/0xd6
             [<811bc6f6>] n_tty_write+0xb8/0x35e
             [<811b9beb>] tty_write+0x163/0x1e4
             [<811b9cd9>] redirected_tty_write+0x6d/0x75
             [<810b6ed6>] vfs_write+0x75/0xb0
             [<810b7265>] SyS_write+0x44/0x77
             [<8142f8ee>] syscall_call+0x7/0xb
      
      -> #0 (&port_lock_key){-.....}:
             [<8104a62d>] __lock_acquire+0x9ea/0xc6d
             [<8104a942>] lock_acquire+0x92/0x101
             [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
             [<811c60be>] serial8250_console_write+0x8c/0x10c
             [<8104e402>] call_console_drivers.constprop.31+0x87/0x118
             [<8104f5d5>] console_unlock+0x1d7/0x398
             [<8104fb70>] vprintk_emit+0x3da/0x3e4
             [<81425f76>] printk+0x17/0x19
             [<8105bfa0>] clockevents_program_min_delta+0x104/0x116
             [<8105c548>] clockevents_program_event+0xe7/0xf3
             [<8105cc1c>] tick_program_event+0x1e/0x23
             [<8103c43c>] hrtimer_force_reprogram+0x88/0x8f
             [<8103c49e>] __remove_hrtimer+0x5b/0x79
             [<8103cb21>] hrtimer_try_to_cancel+0x49/0x66
             [<8103cb4b>] hrtimer_cancel+0xd/0x18
             [<8107f102>] perf_swevent_cancel_hrtimer.part.60+0x2b/0x30
             [<81080705>] task_clock_event_stop+0x20/0x64
             [<81080756>] task_clock_event_del+0xd/0xf
             [<81081350>] event_sched_out+0xab/0x11e
             [<810813e0>] group_sched_out+0x1d/0x66
             [<81081682>] ctx_sched_out+0xaf/0xbf
             [<81081e04>] __perf_event_task_sched_out+0x1ed/0x34f
             [<8142cacc>] __schedule+0x4c6/0x4cb
             [<8142cae0>] schedule+0xf/0x11
             [<8142f9a6>] work_resched+0x5/0x30
      
      other info that might help us debug this:
      
      Chain exists of:
        &port_lock_key --> &ctx->lock --> hrtimer_bases.lock
      
       Possible unsafe locking scenario:
      
             CPU0                    CPU1
             ----                    ----
        lock(hrtimer_bases.lock);
                                     lock(&ctx->lock);
                                     lock(hrtimer_bases.lock);
        lock(&port_lock_key);
      
       *** DEADLOCK ***
      
      4 locks held by trinity-main/74:
       #0:  (&rq->lock){-.-.-.}, at: [<8142c6f3>] __schedule+0xed/0x4cb
       #1:  (&ctx->lock){......}, at: [<81081df3>] __perf_event_task_sched_out+0x1dc/0x34f
       #2:  (hrtimer_bases.lock){-.-...}, at: [<8103caeb>] hrtimer_try_to_cancel+0x13/0x66
       #3:  (console_lock){+.+...}, at: [<8104fb5d>] vprintk_emit+0x3c7/0x3e4
      
      stack backtrace:
      CPU: 0 PID: 74 Comm: trinity-main Not tainted 3.15.0-rc8-06195-g939f04be #2
       00000000 81c3a310 8b995c14 81426f69 8b995c44 81425a99 8161f671 8161f570
       8161f538 8161f559 8161f538 8b995c78 8b142bb0 00000004 8b142fdc 8b142bb0
       8b995ca8 8104a62d 8b142fac 000016f2 81c3a310 00000001 00000001 00000003
      Call Trace:
       [<81426f69>] dump_stack+0x16/0x18
       [<81425a99>] print_circular_bug+0x18f/0x19c
       [<8104a62d>] __lock_acquire+0x9ea/0xc6d
       [<8104a942>] lock_acquire+0x92/0x101
       [<811c60be>] ? serial8250_console_write+0x8c/0x10c
       [<811c6032>] ? wait_for_xmitr+0x76/0x76
       [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e
       [<811c60be>] ? serial8250_console_write+0x8c/0x10c
       [<811c60be>] serial8250_console_write+0x8c/0x10c
       [<8104af87>] ? lock_release+0x191/0x223
       [<811c6032>] ? wait_for_xmitr+0x76/0x76
       [<8104e402>] call_console_drivers.constprop.31+0x87/0x118
       [<8104f5d5>] console_unlock+0x1d7/0x398
       [<8104fb70>] vprintk_emit+0x3da/0x3e4
       [<81425f76>] printk+0x17/0x19
       [<8105bfa0>] clockevents_program_min_delta+0x104/0x116
       [<8105cc1c>] tick_program_event+0x1e/0x23
       [<8103c43c>] hrtimer_force_reprogram+0x88/0x8f
       [<8103c49e>] __remove_hrtimer+0x5b/0x79
       [<8103cb21>] hrtimer_try_to_cancel+0x49/0x66
       [<8103cb4b>] hrtimer_cancel+0xd/0x18
       [<8107f102>] perf_swevent_cancel_hrtimer.part.60+0x2b/0x30
       [<81080705>] task_clock_event_stop+0x20/0x64
       [<81080756>] task_clock_event_del+0xd/0xf
       [<81081350>] event_sched_out+0xab/0x11e
       [<810813e0>] group_sched_out+0x1d/0x66
       [<81081682>] ctx_sched_out+0xaf/0xbf
       [<81081e04>] __perf_event_task_sched_out+0x1ed/0x34f
       [<8104416d>] ? __dequeue_entity+0x23/0x27
       [<81044505>] ? pick_next_task_fair+0xb1/0x120
       [<8142cacc>] __schedule+0x4c6/0x4cb
       [<81047574>] ? trace_hardirqs_off_caller+0xd7/0x108
       [<810475b0>] ? trace_hardirqs_off+0xb/0xd
       [<81056346>] ? rcu_irq_exit+0x64/0x77
      
      Fix the problem by using printk_deferred() which does not call into the
      scheduler.
      Reported-by: NFengguang Wu <fengguang.wu@intel.com>
      Signed-off-by: NJan Kara <jack@suse.cz>
      Cc: stable@vger.kernel.org
      Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      504d5874
    • E
      vfs: fix check for fallocate on active swapfile · 6d2b6170
      Eric Biggers 提交于
      Fix the broken check for calling sys_fallocate() on an active swapfile,
      introduced by commit 0790b31b ("fs: disallow all fallocate
      operation on active swapfile").
      Signed-off-by: NEric Biggers <ebiggers3@gmail.com>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      6d2b6170
    • C
      direct-io: fix AIO regression · af436472
      Christoph Hellwig 提交于
      The direct-io.c rewrite to use the iov_iter infrastructure stopped updating
      the size field in struct dio_submit, and thus rendered the check for
      allowing asynchronous completions to always return false.  Fix this by
      comparing it to the count of bytes in the iov_iter instead.
      Signed-off-by: NChristoph Hellwig <hch@lst.de>
      Reported-by: NTim Chen <tim.c.chen@linux.intel.com>
      Tested-by: NTim Chen <tim.c.chen@linux.intel.com>
      af436472
    • L
      Merge tag 'pm+acpi-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · 6f092803
      Linus Torvalds 提交于
      Pull ACPI fix from Rafael Wysocki:
       "One commit that fixes a problem causing PNP devices to be associated
        with wrong ACPI device objects sometimes during device enumeration due
        to an incorrect check in a matching function.
      
        That problem was uncovered by the ACPI device enumeration rework in
        3.14"
      
      * tag 'pm+acpi-3.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        ACPI / PNP: Fix acpi_pnp_match()
      6f092803
    • L
      Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux · 7c909b09
      Linus Torvalds 提交于
      Pull clock driver fix from Mike Turquette:
       "A single patch to re-enable audio which is broken on all DRA7
        SoC-based platforms.  Missed this one from the last set of fixes"
      
      * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
        clk: ti: clk-7xx: Correct ABE DPLL configuration
      7c909b09
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 · 5196626d
      Linus Torvalds 提交于
      Pull crypto fix from Herbert Xu:
       "This adds missing SELinux labeling to AF_ALG sockets which apparently
        causes SELinux (or at least the SELinux people) to misbehave :)"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
        crypto: af_alg - properly label AF_ALG socket
      5196626d
    • L
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 48418bb6
      Linus Torvalds 提交于
      Pull SCSI barrier fix from James Bottomley:
       "This is a potential data corruption fix: If we get an error sending
        down a barrier, we simply ignore it meaning the barrier semantics get
        violated without anyone being any the wiser.  If the system crashes at
        this point, the filesystem potentially becomes corrupt.  Fix is to
        report errors on failed barriers"
      
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
        scsi: handle flush errors properly
      48418bb6
  6. 31 7月, 2014 18 次提交
  7. 30 7月, 2014 2 次提交