Having multiple destination ports for a unicast address does not make
sense.
Make port_db_load_purge override existent unicast portvec instead of
adding a new port bit.

Fixes: 88472939 ("net: dsa: mv88e6xxx: handle multiple ports in ATU")
Signed-off-by: NDENG Qingfang <dqfext@gmail.com>
Reviewed-by: NVladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20210130134334.10243-1-dqfext@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

It was reported that on RTL8125 network breaks under heavy UDP load,
e.g. torrent traffic ([0], from comment 27). Realtek confirmed a hw bug
and provided me with a test version of the r8125 driver including a
workaround. Tests confirmed that the workaround fixes the issue.
I modified the original version of the workaround to meet mainline
code style.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=209839

v2:
- rebased to net
v3:
- make rtl_skb_is_udp() more robust and use skb_header_pointer()
  to access the ip(v6) header
v4:
- remove dependency on ptp_classify.h
- replace magic number with offsetof(struct udphdr, len)

Fixes: f1bce4ad ("r8169: add support for RTL8125")
Tested-by: Nxplo <xplo.bn@gmail.com>
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/6e453d49-1801-e6de-d5f7-d7e6c7526c8f@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The main arcnet interrupt handler calls arcnet_close() then
arcnet_open(), if the RESET status flag is encountered.

This is invalid:

  1) In general, interrupt handlers should never call ->ndo_stop() and
     ->ndo_open() functions. They are usually full of blocking calls and
     other methods that are expected to be called only from drivers
     init and exit code paths.

  2) arcnet_close() contains a del_timer_sync(). If the irq handler
     interrupts the to-be-deleted timer, del_timer_sync() will just loop
     forever.

  3) arcnet_close() also calls tasklet_kill(), which has a warning if
     called from irq context.

  4) For device reset, the sequence "arcnet_close(); arcnet_open();" is
     not complete.  Some children arcnet drivers have special init/exit
     code sequences, which then embed a call to arcnet_open() and
     arcnet_close() accordingly. Check drivers/net/arcnet/com20020.c.

Run the device RESET sequence from a scheduled workqueue instead.
Signed-off-by: NAhmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20210128194802.727770-1-a.darwish@linutronix.deSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The purpose of the delayed work in the SPAN module is to potentially
update the destination port and various encapsulation parameters of SPAN
agents that point to a VLAN device or a GRE tap. The destination port
can change following the insertion of a new route, for example.

SPAN agents that point to a physical port or the CPU port are static and
never change throughout the lifetime of the SPAN agent. Therefore, skip
over them in the delayed work.

This fixes an issue where the delayed work overwrites the policer
that was set on a SPAN agent pointing to the CPU. Modifying the delayed
work to inherit the original policer configuration is error-prone, as
the same will be needed for any new parameter.

Fixes: 4039504e ("mlxsw: spectrum_span: Allow setting policer on a SPAN agent")
Reviewed-by: NPetr Machata <petrm@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Fix an issue where dump stack is printed and Reset Adapter occurs when
PSE0 GbE or/and PSE1 GbE is/are enabled. EHL PSE0 GbE and PSE1 GbE use
32 bits DMA addressing whereas EHL PCH GbE uses 64 bits DMA addressing.

[   25.535095] ------------[ cut here ]------------
[   25.540276] NETDEV WATCHDOG: enp0s29f2 (intel-eth-pci): transmit queue 2 timed out
[   25.548749] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x259/0x260
[   25.558004] Modules linked in: 8021q bnep bluetooth ecryptfs snd_hda_codec_hdmi intel_gpy marvell intel_ishtp_loader intel_ishtp_hid iTCO_wdt mei_hdcp iTCO_vendor_support x86_pkg_temp_thermal kvm_intel dwmac_intel stmmac kvm igb pcs_xpcs irqbypass phylink snd_hda_intel intel_rapl_msr pcspkr dca snd_hda_codec i915 i2c_i801 i2c_smbus libphy intel_ish_ipc snd_hda_core mei_me intel_ishtp mei spi_dw_pci 8250_lpss spi_dw thermal dw_dmac_core parport_pc tpm_crb tpm_tis parport tpm_tis_core tpm intel_pmc_core sch_fq_codel uhid fuse configfs snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof snd_soc_acpi_intel_match snd_soc_acpi snd_intel_dspcfg ledtrig_audio snd_soc_core snd_compress ac97_bus snd_pcm snd_timer snd soundcore
[   25.633795] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G     U            5.11.0-rc4-intel-lts-MISMAIL5+ #5
[   25.644306] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T4 RVP1, BIOS EHLSFWI1.R00.2434.A00.2010231402 10/23/2020
[   25.659674] RIP: 0010:dev_watchdog+0x259/0x260
[   25.664650] Code: e8 3b 6b 60 ff eb 98 4c 89 ef c6 05 ec e7 bf 00 01 e8 fb e5 fa ff 89 d9 4c 89 ee 48 c7 c7 78 31 d2 9e 48 89 c2 e8 79 1b 18 00 <0f> 0b e9 77 ff ff ff 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7
[   25.685647] RSP: 0018:ffffb7ca80160eb8 EFLAGS: 00010286
[   25.691498] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000103
[   25.699483] RDX: 0000000080000103 RSI: 00000000000000f6 RDI: 00000000ffffffff
[   25.707465] RBP: ffff985709ce0440 R08: 0000000000000000 R09: c0000000ffffefff
[   25.715455] R10: ffffb7ca80160cf0 R11: ffffb7ca80160ce8 R12: ffff985709ce039c
[   25.723438] R13: ffff985709ce0000 R14: 0000000000000008 R15: ffff9857068af940
[   25.731425] FS:  0000000000000000(0000) GS:ffff985864300000(0000) knlGS:0000000000000000
[   25.740481] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.746913] CR2: 00005567f8bb76b8 CR3: 00000001f8e0a000 CR4: 0000000000350ee0
[   25.754900] Call Trace:
[   25.757631]  <IRQ>
[   25.759891]  ? qdisc_put_unlocked+0x30/0x30
[   25.764565]  ? qdisc_put_unlocked+0x30/0x30
[   25.769245]  call_timer_fn+0x2e/0x140
[   25.773346]  run_timer_softirq+0x1f3/0x430
[   25.777932]  ? __hrtimer_run_queues+0x12c/0x2c0
[   25.783005]  ? ktime_get+0x3e/0xa0
[   25.786812]  __do_softirq+0xa6/0x2ef
[   25.790816]  asm_call_irq_on_stack+0xf/0x20
[   25.795501]  </IRQ>
[   25.797852]  do_softirq_own_stack+0x5d/0x80
[   25.802538]  irq_exit_rcu+0x94/0xb0
[   25.806475]  sysvec_apic_timer_interrupt+0x42/0xc0
[   25.811836]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[   25.817586] RIP: 0010:cpuidle_enter_state+0xd9/0x370
[   25.823142] Code: 85 c0 0f 8f 0a 02 00 00 31 ff e8 22 d5 7e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 47 02 00 00 31 ff e8 7b a0 84 ff fb 45 85 f6 <0f> 88 ab 00 00 00 49 63 ce 48 2b 2c 24 48 89 c8 48 6b d1 68 48 c1
[   25.844140] RSP: 0018:ffffb7ca800f7e80 EFLAGS: 00000206
[   25.849996] RAX: ffff985864300000 RBX: 0000000000000003 RCX: 000000000000001f
[   25.857975] RDX: 00000005f2028ea8 RSI: ffffffff9ec5907f RDI: ffffffff9ec62a5d
[   25.865961] RBP: 00000005f2028ea8 R08: 0000000000000000 R09: 0000000000029d00
[   25.873947] R10: 000000137b0e0508 R11: ffff9858643294e4 R12: ffff9858643336d0
[   25.881935] R13: ffffffff9ef74b00 R14: 0000000000000003 R15: 0000000000000000
[   25.889918]  cpuidle_enter+0x29/0x40
[   25.893922]  do_idle+0x24a/0x290
[   25.897536]  cpu_startup_entry+0x19/0x20
[   25.901930]  start_secondary+0x128/0x160
[   25.906326]  secondary_startup_64_no_verify+0xb0/0xbb
[   25.911983] ---[ end trace b4c0c8195d0ba61f ]---
[   25.917193] intel-eth-pci 0000:00:1d.2 enp0s29f2: Reset adapter.

Fixes: 67c08ac4 ("net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID")
Signed-off-by: NVoon Weifeng <weifeng.voon@intel.com>
Co-developed-by: NMohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: NMohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Link: https://lore.kernel.org/r/20210126100844.30326-1-mohammad.athari.ismail@intel.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

lsusb -v for this device:

Bus 003 Device 007: ID 1e2d:0069
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x1e2d
  idProduct          0x0069
  bcdDevice            0.00
  iManufacturer           4 Cinterion Wireless Modules
  iProduct                3 PLSx3
  iSerial                 5 fa3c1419
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          352
    bNumInterfaces         10
    bConfigurationValue     1
    iConfiguration          2 Cinterion Configuration
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              500mA
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         0
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         2
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          3
      CDC Union:
        bMasterInterface        2
        bSlaveInterface         3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         4
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        4
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          5
      CDC Union:
        bMasterInterface        4
        bSlaveInterface         5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        5
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         6
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        6
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          7
      CDC Union:
        bMasterInterface        6
        bSlaveInterface         7
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        7
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x88  EP 8 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         8
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       0
      bFunctionProtocol       0
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        8
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      6 Ethernet Networking
      bInterfaceProtocol      0
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC Ethernet:
        iMacAddress                      1 00A0C6C14190
        bmEthernetStatistics    0x00000000
        wMaxSegmentSize              16384
        wNumberMCFilters            0x0001
        bNumberPowerFilters              0
      CDC Union:
        bMasterInterface        8
        bSlaveInterface         9
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x89  EP 9 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        9
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        9
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x8a  EP 10 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)
Signed-off-by: NGiacinto Cifelli <gciofono@gmail.com>
Link: https://lore.kernel.org/r/20210126044245.8455-1-gciofono@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Ensure that received Command-Response Queue (CRQ) entries are
properly read in order by the driver. dma_rmb barrier has
been added before accessing the CRQ descriptor to ensure
the entire descriptor is read before processing.

Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: NLijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20210128013442.88319-1-ljp@linux.ibm.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The "bec" struct isn't necessarily always initialized. For example, the
mcp251xfd_get_berr_counter() function doesn't initialize anything if the
interface is down.

Fixes: 52c793f2 ("can: netlink support for bus-error reporting and counters")
Link: https://lore.kernel.org/r/YAkaRdRJncsJO8Ve@mwandaSigned-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

In commit 3499ba81 ("xen: Fix event channel callback via INTX/GSI")
I reworked the triggering of xenbus_probe().

I tried to simplify things by taking out the workqueue based startup
triggered from wake_waiting(); the somewhat poorly named xenbus IRQ
handler.

I missed the fact that in the XS_LOCAL case (Dom0 starting its own
xenstored or xenstore-stubdom, which happens after the kernel is booted
completely), that IRQ-based trigger is still actually needed.

So... put it back, except more cleanly. By just spawning a xenbus_probe
thread which waits on xb_waitq and runs the probe the first time it
gets woken, just as the workqueue-based hack did.

This is actually a nicer approach for *all* the back ends with different
interrupt methods, and we can switch them all over to that without the
complex conditions for when to trigger it. But not in -rc6. This is
the minimal fix for the regression, although it's a step in the right
direction instead of doing a partial revert and actually putting the
workqueue back. It's also simpler than the workqueue.

Fixes: 3499ba81 ("xen: Fix event channel callback via INTX/GSI")
Reported-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/4c9af052a6e0f6485d1de43f2c38b1461996db99.camel@infradead.orgSigned-off-by: NJuergen Gross <jgross@suse.com>

fec_restart() does a hard reset of the MAC module when the link status
changes to up. This temporarily resets the R_CNTRL register which controls
the MII mode of the ENET_OUT clock. In the case of RMII, the clock
frequency momentarily drops from 50MHz to 25MHz until the register is
reconfigured. Some link partners do not tolerate this glitch and
invalidate the link causing failure to establish a stable link when using
PHY polling mode. Since as per IEEE802.3 the criteria for link validity
are PHY-specific, what the partner should tolerate cannot be assumed, so
avoid resetting the MII clock by using software reset instead of hardware
reset when the link is up. This is generally relevant only if the SoC
provides the clock to an external PHY and the PHY is configured for RMII.
Signed-off-by: NLaurent Badel <laurentbadel@eaton.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Function __team_compute_features() is protected by team->lock
mutex when it is called from team_compute_features() used when
features of an underlying device is changed. This causes
a deadlock when NETDEV_FEAT_CHANGE notifier for underlying device
is fired due to change propagated from team driver (e.g. MTU
change). It's because callbacks like team_change_mtu() or
team_vlan_rx_{add,del}_vid() protect their port list traversal
by team->lock mutex.

Example (r8169 case where this driver disables TSO for certain MTU
values):
...
[ 6391.348202]  __mutex_lock.isra.6+0x2d0/0x4a0
[ 6391.358602]  team_device_event+0x9d/0x160 [team]
[ 6391.363756]  notifier_call_chain+0x47/0x70
[ 6391.368329]  netdev_update_features+0x56/0x60
[ 6391.373207]  rtl8169_change_mtu+0x14/0x50 [r8169]
[ 6391.378457]  dev_set_mtu_ext+0xe1/0x1d0
[ 6391.387022]  dev_set_mtu+0x52/0x90
[ 6391.390820]  team_change_mtu+0x64/0xf0 [team]
[ 6391.395683]  dev_set_mtu_ext+0xe1/0x1d0
[ 6391.399963]  do_setlink+0x231/0xf50
...

In fact team_compute_features() called from team_device_event()
does not need to be protected by team->lock mutex and rcu_read_lock()
is sufficient there for port list traversal.

Fixes: 3d249d4c ("net: introduce ethernet teaming device")
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Reviewed-by: NCong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: NJiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20210125074416.4056484-1-ivecera@redhat.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

If a non nat tuple entry is inserted just to the regular tuples
rhashtable (ct_tuples_ht) and not to natted tuples rhashtable
(ct_nat_tuples_ht). Commit bc562be9 ("net/mlx5e: CT: Save ct entries
tuples in hashtables") mixed up the return labels and names sot that on
cleanup or failure we still try to remove for the natted tuples rhashtable.

Fix that by correctly checking if a natted tuples insertion
before removing it. While here make it more readable.

Fixes: bc562be9 ("net/mlx5e: CT: Save ct entries tuples in hashtables")
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Signed-off-by: NPaul Blakey <paulb@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Sometimes, channel params are changed without recreating the channels.
It happens in two basic cases: when the channels are closed, and when
the parameter being changed doesn't affect how channels are configured.
Such changes invoke a hardware command that might fail. The whole
operation should be reverted in such cases, but the code that restores
the parameters' values in the driver was missing. This commit adds this
handling.

Fixes: 2e20a151 ("net/mlx5e: Fail safe mtu and lro setting")
Signed-off-by: NMaxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Trust state may be changed without recreating the channels. It happens
when the channels are closed, and when channel parameters (min inline
mode) stay the same after changing the trust state. Changing the trust
state is a hardware command that may fail. The current code didn't
restore the channel parameters to their old values if an error happened
and the channels were closed. This commit adds handling for this case.

Fixes: 6e0504c6 ("net/mlx5e: Change inline mode correctly when changing trust state")
Signed-off-by: NMaxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

This commit addresses two issues related to changing the number of
queues when the channels are closed:

1. Missing call to mlx5e_num_channels_changed to update
real_num_tx_queues when the number of TCs is changed.

2. When mlx5e_num_channels_changed returns an error, the channel
parameters must be reverted.

Two Fixes: tags correspond to the first commits where these two issues
were introduced.

Fixes: 3909a12e ("net/mlx5e: Fix configuration of XPS cpumasks and netdev queues in corner cases")
Fixes: fa374877 ("net/mlx5e: Handle errors from netif_set_real_num_{tx,rx}_queues")
Signed-off-by: NMaxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Currently, if a neighbour isn't valid when offloading tunnel encap rules,
we offload the original match and replace the original action with
"goto slow path" action. For this we use a temporary flow attribute based
on the original flow attribute and then change the action. Flow flags,
which among those is the CT flag, are still shared for the slow path rule
offload, so we end up parsing this flow as a CT + goto slow path rule.

Besides being unnecessary, CT action offload saves extra information in
the passed flow attribute, such as created ct_flow and mod_hdr, which
is lost onces the temporary flow attribute is freed.

When a neigh is updated and is valid, we offload the original CT rule
with original CT action, which again creates a ct_flow and mod_hdr
and saves it in the flow's original attribute. Then we delete the slow
path rule with a temporary flow attribute based on original updated
flow attribute, and we free the relevant ct_flow and mod_hdr.

Then when tc deletes this flow, we try to free the ct_flow and mod_hdr
on the flow's attribute again.

To fix the issue, skip all furture proccesing (CT/Sample/Split rules)
in offload/unoffload of slow path rules.

Call trace:
[  758.850525] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000218
[  758.952987] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[  758.964170] Modules linked in: act_csum(E) act_pedit(E) act_tunnel_key(E) act_ct(E) nf_flow_table(E) xt_nat(E) ip6table_filter(E) ip6table_nat(E) xt_comment(E) ip6_tables(E) xt_conntrack(E) xt_MASQUERADE(E) nf_conntrack_netlink(E) xt_addrtype(E) iptable_filter(E) iptable_nat(E) bpfilter(E) br_netfilter(E) bridge(E) stp(E) llc(E) xfrm_user(E) overlay(E) act_mirred(E) act_skbedit(E) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) esp6_offload(E) esp6(E) esp4_offload(E) esp4(E) xfrm_algo(E) mlx5_ib(OE) ib_uverbs(OE) geneve(E) ip6_udp_tunnel(E) udp_tunnel(E) nfnetlink_cttimeout(E) nfnetlink(E) mlx5_core(OE) act_gact(E) cls_flower(E) sch_ingress(E) openvswitch(E) nsh(E) nf_conncount(E) nf_nat(E) mlxfw(OE) psample(E) nf_conntrack(E) nf_defrag_ipv4(E) vfio_mdev(E) mdev(E) ib_core(OE) mlx_compat(OE) crct10dif_ce(E) uio_pdrv_genirq(E) uio(E) i2c_mlx(E) mlxbf_pmc(E) sbsa_gwdt(E) mlxbf_gige(E) gpio_mlxbf2(E) mlxbf_pka(E) mlx_trio(E) mlx_bootctl(E) bluefield_edac(E) knem(O)
[  758.964225]  ip_tables(E) mlxbf_tmfifo(E) ipv6(E) crc_ccitt(E) nf_defrag_ipv6(E)
[  759.154186] CPU: 5 PID: 122 Comm: kworker/u16:1 Tainted: G           OE     5.4.60-mlnx.52.gde81e85 #1
[  759.172870] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:3.5.0-2-gc1b5d64 Jan  4 2021
[  759.195466] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core]
[  759.207344] pstate: a0000005 (NzCv daif -PAN -UAO)
[  759.217003] pc : mlx5_del_flow_rules+0x5c/0x160 [mlx5_core]
[  759.228229] lr : mlx5_del_flow_rules+0x34/0x160 [mlx5_core]
[  759.405858] Call trace:
[  759.410804]  mlx5_del_flow_rules+0x5c/0x160 [mlx5_core]
[  759.421337]  __mlx5_eswitch_del_rule.isra.43+0x5c/0x1c8 [mlx5_core]
[  759.433963]  mlx5_eswitch_del_offloaded_rule_ct+0x34/0x40 [mlx5_core]
[  759.446942]  mlx5_tc_rule_delete_ct+0x68/0x74 [mlx5_core]
[  759.457821]  mlx5_tc_ct_delete_flow+0x160/0x21c [mlx5_core]
[  759.469051]  mlx5e_tc_unoffload_fdb_rules+0x158/0x168 [mlx5_core]
[  759.481325]  mlx5e_tc_encap_flows_del+0x140/0x26c [mlx5_core]
[  759.492901]  mlx5e_rep_update_flows+0x11c/0x1ec [mlx5_core]
[  759.504127]  mlx5e_rep_neigh_update+0x160/0x200 [mlx5_core]
[  759.515314]  process_one_work+0x178/0x400
[  759.523350]  worker_thread+0x58/0x3e8
[  759.530685]  kthread+0x100/0x12c
[  759.537152]  ret_from_fork+0x10/0x18
[  759.544320] Code: 97ffef55 51000673 3100067f 54ffff41 (b9421ab3)
[  759.556548] ---[ end trace fab818bb1085832d ]---

Fixes: 4c3844d9 ("net/mlx5e: CT: Introduce connection tracking")
Signed-off-by: NPaul Blakey <paulb@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NVlad Buslov <vladbu@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

The cited commit introduce new CONFIG_MLX5_CLS_ACT kconfig variable
to control compilation of TC hardware offloads implementation.
When this configuration is disabled the driver is still wrongly
reports in ethtool that hw-tc-offload is supported.

Fixed by reporting hw-tc-offload is supported only when
CONFIG_MLX5_CLS_ACT is enabled.

Fixes: d956873f ("net/mlx5e: Introduce kconfig var for TC support")
Signed-off-by: NMaor Dickman <maord@nvidia.com>
Reviewed-by: NVlad Buslov <vladbu@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Pages for the host PF and ECPF were stored in the same tree, so the ECPF
pages were being freed along with the host PF's when the host driver
unloaded.

Combine the function ID and ECPF flag to use as an index into the
x-array containing the trees to get a different tree for the host PF and
ECPF.

Fixes: c6168161 ("net/mlx5: Add support for release all pages event")
Signed-off-by: NDaniel Jurgens <danielj@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

When IPSEC offload isn't active, the number of stats is not zero, but
the strings are not filled, leading to exposing stats with empty names.
Fix this by using the same condition for NUM_STATS and FILL_STRS.

Fixes: 0aab3e1b ("net/mlx5e: IPSec, Expose IPsec HW stat only for supporting HW")
Signed-off-by: NMaxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: NRaed Salem <raeds@nvidia.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

"Unsupported key used:" appears in kernel log when flows with
unsupported key are used, arp fields for example.

OpenVSwitch was changed to match on arp fields by default that
caused this warning to appear in kernel log for every arp rule, which
can be a lot.

Fix by lowering print level from warning to debug.

Fixes: e3a2b7ed ("net/mlx5e: Support offload cls_flower with drop action")
Signed-off-by: NMaor Dickman <maord@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NSaeed Mahameed <saeedm@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Instead of directly return, goto the error handling label to free
allocated page.

Fixes: 5f29458b ("net/mlx5e: Support dump callback in TX reporter")
Signed-off-by: NPan Bian <bianpan2016@163.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

rate_bytes_ps is a 64-bit field. It passed as 32-bit field to
apply_police_params(). Due to this when police rate is higher
than 4Gbps, 32-bit calculation ignores the carry. This results
in incorrect rate configurationn the device.

Fix it by performing 64-bit calculation.

Fixes: fcb64c0f ("net/mlx5: E-Switch, add ingress rate support")
Signed-off-by: NParav Pandit <parav@nvidia.com>
Reviewed-by: NEli Cohen <elic@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

When we create the ft object we also init rhltable in ft->fgs_hash.
So in error flow before kfree of ft we need to destroy that rhltable.

Fixes: 693c6883 ("net/mlx5: Add hash table for flow groups in flow table")
Signed-off-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NMaor Dickman <maord@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

net/core/tso.c got recent support for USO, and this broke iwlfifi
because the driver implemented a limited form of GSO.

Providing ->gso_type allows for skb_is_gso_tcp() to provide
a correct result.

Fixes: 3d5b459b ("net: tso: add UDP segmentation support")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NBen Greear <greearb@candelatech.com>
Tested-by: NBen Greear <greearb@candelatech.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209913
Link: https://lore.kernel.org/r/20210125150949.619309-1-eric.dumazet@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Link speed advertising in igc has two problems:

- When setting the advertisement via ethtool, the link speed is converted
  to the legacy 32 bit representation for the intel PHY code.
  This inadvertently drops ETHTOOL_LINK_MODE_2500baseT_Full_BIT (being
  beyond bit 31).  As a result, any call to `ethtool -s ...' drops the
  2500Mbit/s link speed from the PHY settings.  Only reloading the driver
  alleviates that problem.

  Fix this by converting the ETHTOOL_LINK_MODE_2500baseT_Full_BIT to the
  Intel PHY ADVERTISE_2500_FULL bit explicitly.

- Rather than checking the actual PHY setting, the .get_link_ksettings
  function always fills link_modes.advertising with all link speeds
  the device is capable of.

  Fix this by checking the PHY autoneg_advertised settings and report
  only the actually advertised speeds up to ethtool.

Fixes: 8c5ad0da ("igc: Add ethtool support")
Signed-off-by: NCorinna Vinschen <vinschen@redhat.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

This change simplifies the VF initialization check and also minimizes
the delay between acquiring the VSI pointer and using it. As known by
the commit being fixed, there is a risk of the VSI pointer getting
changed. Therefore minimize the delay between getting and using the
pointer.

Fixes: 9889707b ("i40e: Fix crash caused by stress setting of VF MAC addresses")
Signed-off-by: NStefan Assmann <sassmann@kpanic.de>
Reviewed-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The current MSI-X enablement logic tries to enable best-case MSI-X
vectors and if that fails we only support a bare-minimum set. This
includes a single MSI-X for 1 Tx and 1 Rx queue and a single MSI-X
for the OICR interrupt. Unfortunately, the driver fails to load when we
don't get as many MSI-X as requested for a couple reasons.

First, the code to allocate MSI-X in the driver tries to allocate
num_online_cpus() MSI-X for LAN traffic without caring about the number
of MSI-X actually enabled/requested from the kernel for LAN traffic.
So, when calling ice_get_res() for the PF VSI, it returns failure
because the number of available vectors is less than requested. Fix
this by not allowing the PF VSI to allocation  more than
pf->num_lan_msix MSI-X vectors and pf->num_lan_msix Rx/Tx queues.
Limiting the number of queues is done because we don't want more than
1 Tx/Rx queue per interrupt due to performance conerns.

Second, the driver assigns pf->num_lan_msix = 2, to account for LAN
traffic and the OICR. However, pf->num_lan_msix is only meant for LAN
MSI-X. This is causing a failure when the PF VSI tries to
allocate/reserve the minimum pf->num_lan_msix because the OICR MSI-X has
already been reserved, so there may not be enough MSI-X vectors left.
Fix this by setting pf->num_lan_msix = 1 for the failure case. Then the
ICE_MIN_MSIX accounts for the LAN MSI-X and the OICR MSI-X needed for
the failure case.

Update the related defines used in ice_ena_msix_range() to align with
the above behavior and remove the unused RDMA defines because RDMA is
currently not supported. Also, remove the now incorrect comment.

Fixes: 152b978a ("ice: Rework ice_ena_msix_range")
Signed-off-by: NBrett Creeley <brett.creeley@intel.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Currently users could create more channels than LAN MSI-X available.
This is happening because there is no check against pf->num_lan_msix
when checking the max allowed channels and will cause performance issues
if multiple Tx and Rx queues are tied to a single MSI-X. Fix this by not
allowing more channels than LAN MSI-X available in pf->num_lan_msix.

Fixes: 87324e74 ("ice: Implement ethtool ops for channels")
Signed-off-by: NBrett Creeley <brett.creeley@intel.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

Fix the driver to copy the MAC address configured in ndo_set_mac_address
into dev_addr, even if the MAC filter already exists in HW. In some
situations (e.g. bonding) the netdev's dev_addr could have been modified
outside of the driver, with no change to the HW filter, so the driver
cannot assume that they match.

Fixes: 757976ab ("ice: Fix check for removing/adding mac filters")
Signed-off-by: NNick Nunley <nicholas.d.nunley@intel.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

This patch is based on a similar change to i40e by Slawomir Laba:
"i40e: Implement flow for IPv6 next header (extension header)".

When a packet contains an IPv6 header with next header which is
an extension header and not a protocol one, the kernel function
skb_transport_header called with such sk_buff will return a
pointer to the extension header and not to the TCP one.

The above explained call caused a problem with packet processing
for skb with encapsulation for tunnel with ICE_TX_CTX_EIPT_IPV6.
The extension header was not skipped at all.

The ipv6_skip_exthdr function does check if next header of the IPV6
header is an extension header and doesn't modify the l4_proto pointer
if it points to a protocol header value so its safe to omit the
comparison of exthdr and l4.hdr pointers. The ipv6_skip_exthdr can
return value -1. This means that the skipping process failed
and there is something wrong with the packet so it will be dropped.

Fixes: a4e82a81 ("ice: Add support for tunnel offloads")
Signed-off-by: NNick Nunley <nicholas.d.nunley@intel.com>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

The packet classifier would occasionally misrecognize an IPv6 training
packet when the next protocol field was 0. The correct value for
unspecified protocol is IPPROTO_NONE.

Fixes: 165d80d6 ("ice: Support IPv6 Flow Director filters")
Signed-off-by: NHenry Tieman <henry.w.tieman@intel.com>
Reviewed-by: NPaul Menzel <pmenzel@molgen.mpg.de>
Tested-by: NTony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

raw_fmt->height in never initialized. But width in initialized twice.

Fixes: 88d06362 ("media: hantro: Refactor for V4L2 API spec compliancy")
Signed-off-by: NRicardo Ribalda <ribalda@chromium.org>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

Missing stm32 directory to Makefile.
Signed-off-by: NYannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 4be5e864 ("media: move CEC platform drivers to a separate directory")
Cc: <stable@vger.kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

During H264 API overhaul subtle bug was introduced Cedrus driver.
Progressive references have both, top and bottom reference flags set.
Cedrus reference list expects only bottom reference flag and only when
interlaced frames are decoded. However, due to a bug in Cedrus check,
exclusivity is not tested and that flag is set also for progressive
references. That causes "jumpy" background with many videos.

Fix that by checking that only bottom reference flag is set in control
and nothing else.
Tested-by: NAndre Heider <a.heider@gmail.com>
Fixes: cfc8c3ed ("media: cedrus: h264: Properly configure reference field")
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

This code ends up calling wiphy_apply_custom_regulatory(), for which
we document that it should be called before wiphy_register(). This
driver doesn't do that, but calls it from ndo_open() with the RTNL
held, which caused deadlocks.

Since the driver just registers static regdomain data and then the
notifier applies the channel changes if any, there's no reason for
it to call this in ndo_open(), move it earlier to fix the deadlock.
Reported-and-tested-by: NHans de Goede <hdegoede@redhat.com>
Fixes: 51d62f2f ("cfg80211: Save the regulatory domain with a lock")
Link: https://lore.kernel.org/r/20210126115409.d5fd6f8fe042.Ib5823a6feb2e2aa01ca1a565d2505367f38ad246@changeidAcked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The recent commit to fix a memory leak introduced an inadvertant NULL
pointer dereference. The `wacom_wac->pen_fifo` variable was never
intialized, resuling in a crash whenever functions tried to use it.
Since the FIFO is only used by AES pens (to buffer events from pen
proximity until the hardware reports the pen serial number) this would
have been easily overlooked without testing an AES device.

This patch converts `wacom_wac->pen_fifo` over to a pointer (since the
call to `devres_alloc` allocates memory for us) and ensures that we assign
it to point to the allocated and initalized `pen_fifo` before the function
returns.

Link: https://github.com/linuxwacom/input-wacom/issues/230
Fixes: 37309f47 ("HID: wacom: Fix memory leakage caused by kfifo_alloc")
CC: stable@vger.kernel.org # v4.19+
Signed-off-by: NJason Gerecke <jason.gerecke@wacom.com>
Tested-by: NPing Cheng <ping.cheng@wacom.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This is inline with the specification described in blkif.h:

 * discard-granularity: should be set to the physical block size if
   node is not present.
 * discard-alignment, discard-secure: should be set to 0 if node not
   present.

This was detected as QEMU would only create the discard-granularity
node but not discard-alignment, and thus the setup done in
blkfront_setup_discard would fail.

Fix blkfront_setup_discard to not fail on missing nodes, and also fix
blkif_set_queue_limits to set the discard granularity to the physical
block size if none is specified in xenbus.

Fixes: ed30bf31 ('xen-blkfront: Handle discard requests.')
Reported-by: NArthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: NRoger Pau Monné <roger.pau@citrix.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Tested-By: NArthur Borsboom <arthurborsboom@gmail.com>
Link: https://lore.kernel.org/r/20210119105727.95173-1-roger.pau@citrix.comSigned-off-by: NJuergen Gross <jgross@suse.com>

layer to use write_iter. Fix the redirected_tty_write declaration
also in n_tty and change the comparisons to use write_iter instead of
write.

[ Also moved the declaration of redirected_tty_write() to the proper
  location in a header file. The reason for the bug was the bogus extern
  declaration in n_tty.c silently not matching the changed definition in
  tty_io.c, and because it wasn't in a shared header file, there was no
  cross-checking of the declaration.

  Sami noticed because Clang's Control Flow Integrity checking ended up
  incidentally noticing the inconsistent declaration.    - Linus ]

Fixes: 9bb48c82 ("tty: implement write_iter")
Signed-off-by: NSami Tolvanen <samitolvanen@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following crash log can occur unplugging the usb dongle since,
after the urb poison in mt7601u_free_tx_queue(), usb_submit_urb() will
always fail resulting in a skb kfree while the skb has been already
queued.

Fix the issue enqueuing the skb only if usb_submit_urb() succeed.

Hardware name: Hewlett-Packard 500-539ng/2B2C, BIOS 80.06 04/01/2015
Workqueue: usb_hub_wq hub_event
RIP: 0010:skb_trim+0x2c/0x30
RSP: 0000:ffffb4c88005bba8 EFLAGS: 00010206
RAX: 000000004ad483ee RBX: ffff9a236625dee0 RCX: 000000000000662f
RDX: 000000000000000c RSI: 0000000000000000 RDI: ffff9a2343179300
RBP: ffff9a2343179300 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9a23748f7840 R11: 0000000000000001 R12: ffff9a236625e4d4
R13: ffff9a236625dee0 R14: 0000000000001080 R15: 0000000000000008
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd410a34ef8 CR3: 00000001416ee001 CR4: 00000000001706f0
Call Trace:
 mt7601u_tx_status+0x3e/0xa0 [mt7601u]
 mt7601u_dma_cleanup+0xca/0x110 [mt7601u]
 mt7601u_cleanup+0x22/0x30 [mt7601u]
 mt7601u_disconnect+0x22/0x60 [mt7601u]
 usb_unbind_interface+0x8a/0x270
 ? kernfs_find_ns+0x35/0xd0
 __device_release_driver+0x17a/0x230
 device_release_driver+0x24/0x30
 bus_remove_device+0xdb/0x140
 device_del+0x18b/0x430
 ? kobject_put+0x98/0x1d0
 usb_disable_device+0xc6/0x1f0
 usb_disconnect.cold+0x7e/0x20a
 hub_event+0xbf3/0x1870
 process_one_work+0x1b6/0x350
 worker_thread+0x53/0x3e0
 ? process_one_work+0x350/0x350
 kthread+0x11b/0x140
 ? __kthread_bind_mask+0x60/0x60
 ret_from_fork+0x22/0x30

Fixes: 23377c20 ("mt7601u: fix possible memory leak when the device is disconnected")
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Acked-by: NJakub Kicinski <kubakici@wp.pl>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/3b85219f669a63a8ced1f43686de05915a580489.1610919247.git.lorenzo@kernel.org

If we find an entry without an SKB, we currently continue, but
that will just result in an infinite loop since we won't increment
the read pointer, and will try the same thing over and over again.
Fix this.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.abe2dedcc3ac.Ia6b03f9eeb617fd819e56dd5376f4bb8edc7b98a@changeid