- 09 11月, 2018 1 次提交
-
-
由 Michał Mirosław 提交于
This just removes VLAN_TAG_PRESENT use. VLAN TCI=0 special meaning is deeply embedded in the driver code and so is left as is. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 7月, 2018 1 次提交
-
-
由 Jan Dakinevich 提交于
Size of csk_tbl is about 58K, which means 3rd order page allocation. kvzalloc provides a fallback if no high order memory is available. Signed-off-by: NJan Dakinevich <jan.dakinevich@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 7月, 2018 1 次提交
-
-
由 Colin Ian King 提交于
Pointer req and variable func are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'req' set but not used [-Wunused-but-set-variable] warning: variable 'func' set but not used [-Wunused-but-set-variable] Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 6月, 2018 1 次提交
-
-
由 Dan Carpenter 提交于
Static checkers complain that id_tbl->table points to longs and 4 bytes is smaller than sizeof(long). But the since other side is dividing by 32 instead of sizeof(long), that means the current code works fine. Anyway, it's more conventional to use the BITS_TO_LONGS() macro when we're allocating a bitmap. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 6月, 2018 1 次提交
-
-
由 Kees Cook 提交于
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 24 9月, 2017 1 次提交
-
-
由 Christophe JAILLET 提交于
All the error handling paths 'goto error', except this one. We should also go to error in this case, or some resources will be leaking. Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 2月, 2017 1 次提交
-
-
由 Parav Pandit 提交于
This patch makes use of is_vlan_dev() function instead of flag comparison which is exactly done by is_vlan_dev() helper function. Signed-off-by: NParav Pandit <parav@mellanox.com> Reviewed-by: NDaniel Jurgens <danielj@mellanox.com> Acked-by: NStephen Hemminger <stephen@networkplumber.org> Acked-by: NJon Maxwell <jmaxwell37@gmail.com> Acked-by: NJohannes Thumshirn <jth@kernel.org> Acked-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 5月, 2016 1 次提交
-
-
由 Jon Maxwell 提交于
We recently had a system crash in the cnic module. Vmcore analysis confirmed that "ip link up" was executed which failed due to an allocation failure because of memory fragmentation. Futher analysis revealed that the cnic irq vector was still allocated after the "ip link up" that failed. When "ip link down" was executed it called free_msi_irqs() which crashed the system because the cnic irq was still inuse. PANIC: "kernel BUG at drivers/pci/msi.c:411!" The code execution was: cnic_netdev_event() if (event == NETDEV_UP) { . . ▹ if (!cnic_start_hw(dev)) cnic_start_hw() calls cnic_cm_open() which failed with -ENOMEM cnic_start_hw() then took the err1 path: err1:
↩ cp->free_resc(dev);↩ <---- frees resources but not irq vector pci_dev_put(dev->pcidev);↩ return err;↩ }↩ This returns control back to cnic_netdev_event() but now the cnic irq vector is still allocated even although cnic_cm_open() failed. The next "ip link down" while trigger the crash. The cnic_start_hw() routine is not handling the allocation failure correctly. Fix this by checking whether CNIC_DRV_STATE_HANDLES_IRQ flag is set indicating that the hardware has been started in cnic_start_hw(). If it has then call cp->stop_hw() which frees the cnic irq vector and cnic resources. Otherwise just maintain the previous behaviour and free cnic resources. I reproduced this by injecting an ENOMEM error into cnic_cm_alloc_mem()s return code. # ip link set dev enpX down # ip link set dev enpX up <--- hit's allocation failure # ip link set dev enpX down <--- crashes here With this patch I confirmed there was no crash in the reproducer. Signed-off-by: NJon Maxwell <jmaxwell37@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 8月, 2015 2 次提交
-
-
由 Adheer Chandravanshi 提交于
Signed-off-by: NAdheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tej Parkash 提交于
Signed-off-by: NTej Parkash <tej.parkash@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 2月, 2015 1 次提交
-
-
由 Rasesh Mody 提交于
This patch provides additional changes as a part of BNX2 and CNIC driver re-branding effort. Signed-off-by: NRasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 10月, 2014 1 次提交
-
-
由 Tej Parkash 提交于
1. Remove the rcu_read_lock/unlock around rcu_access_pointer 2. Replace the rcu_dereference with rcu_access_pointer Signed-off-by: NTej Parkash <tej.parkash@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 9月, 2014 1 次提交
-
-
由 Anish Bhatt 提交于
The cnic module needs to ensure that if ipv6 support is compiled as a module, then the cnic module cannot be compiled as built-in as it depends on ipv6. Made this check cleaner via Kconfig Use simpler IS_ENABLED for CONFIG_VLAN_8021Q check Signed-off-by: NAnish Bhatt <anish@chelsio.com> Acked-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 8月, 2014 1 次提交
-
-
由 Andreea-Cristina Bernat 提交于
The "rcu_dereference()" calls are used directly in conditions. Since their return values are never dereferenced it is recommended to use "rcu_access_pointer()" instead of "rcu_dereference()". Therefore, this patch makes the replacements. The following Coccinelle semantic patch was used: @@ @@ ( if( (<+... - rcu_dereference + rcu_access_pointer (...) ...+>)) {...} | while( (<+... - rcu_dereference + rcu_access_pointer (...) ...+>)) {...} ) Signed-off-by: NAndreea-Cristina Bernat <bernat.ada@gmail.com> Acked-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2014 1 次提交
-
-
由 Jitendra Kalsaria 提交于
o QLogic has acquired the NetXtremeII products and drivers from Broadcom. This patch re-brands cnic driver as a QLogic driver Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 6月, 2014 3 次提交
-
-
由 Michael Chan 提交于
The iSCSI netlink message needs to be sent before the ulp_ops is cleared as it is sent through a function pointer in the ulp_ops. This bug causes iscsid to not get the message when the bnx2i driver is unloaded. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
We are allocating memory with GFP_KERNEL under spinlock. Since this is the only call manipulating the cnic_udev_list and it is always under rtnl_lock, cnic_dev_lock can be safely removed. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Because the called function, such as bnx2fc_indicate_netevent(), can sleep, we cannot take rcu_lock(). To prevent the rcu protected ulp_ops from going away, we use the cnic_lock mutex and set the ULP_F_CALL_PENDING flag. The code already waits for ULP_F_CALL_PENDING flag to clear in cnic_unregister_device(). Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 4月, 2014 1 次提交
-
-
由 Peter Zijlstra 提交于
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 19 3月, 2014 3 次提交
-
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The bnx2/bnx2x rings are made up of linked pages. However there is an upper limit on the page size as some the page size settings are 16-bit in the hardware/firmware interface. In the current code, some parts use BNX2_PAGE_SIZE which has a 16K upper limit and some parts use PAGE_SIZE. On archs with >= 64K PAGE_SIZE, it generates some compile warnings. Define a new CNIC_PAGE_SZIE which has an upper limit of 16K and use it consistently in all relevant parts. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NEddie Wai <eddie.wai@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
For per device operations, cnic needs to dereference the RCU protected cp->ulp_ops instead of the global cnic_ulp_tbl. In 2 locations, cnic_send_nlmsg() and cnic_copy_ulp_stats(), it was referencing the global table. If the device has been unregistered and these functions are still being called (very unlikely scenarios), it could lead to NULL pointer dereference. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 1月, 2014 1 次提交
-
-
由 Eddie Wai 提交于
The buffer that is used to pass doorbell offset to the userspace UIO driver may contain nonzero value in older versions of bnx2x driver. Userspace cannot easily tell whether it contains a valid doorbell offset or not. With the added signature, userspace will only use the doorbell offset if the signature is present. Update version to 2.5.19. Signed-off-by: NEddie Wai <eddie.wai@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 10月, 2013 1 次提交
-
-
由 Joe Perches 提交于
Convert the memset/memcpy uses of 6 to ETH_ALEN where appropriate. Also convert some struct definitions and u8 array declarations of [6] to ETH_ALEN. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NArend van Spriel <arend@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 9月, 2013 2 次提交
-
-
由 Michael Chan 提交于
commit 104a43ed cnic: Use CHIP_NUM macros from bnx2x.h changed the code to use the bnx2x macro NO_FCOE() to determine if FCoE is supported or not. There is another place in cnic that is still using the old method to determine if FCoE is supported or not. The 2 methods may not yield the same result after the network interface is brought down and up. This will cause the crash as cnic_bnx2x_service_kcq() will access the uninitialized cp->kcq2. The fix is to consistently use the same macro CNIC_SUPPORTS_FCOE() which uses the bnx2x NO_FCOE() macro. As a follow-up, we can clean up the code to remove the old method as it is no longer needed. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
commit b9871bcf bnx2x: VF RSS support - PF side changed the configuration of the doorbell HW and it broke iSCSI and FCoE. We fix this by making compatible changes to the doorbell address in bnx2i and bnx2fc. For the userspace driver, we need to pass a modified CID so that the existing userspace driver will calculate the correct doorbell address and continue to work. Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEddie Wai <eddie.wai@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 9月, 2013 4 次提交
-
-
由 Michael Chan 提交于
Use bp->pfid from bnx2x instead to avoid duplication. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Use BP_PORT and chip_port_mode directly from bnx2x.h to avoid duplication. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
to avoid duplication of the same logic. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
This eliminates duplication and ensures that all bnx2x chips will be supported. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 8月, 2013 1 次提交
-
-
由 Michael Chan 提交于
On some bnx2x devices, iSCSI is determined to be unsupported only after firmware is downloaded. We need to check max_iscsi_conn again after NETDEV_UP and block iSCSI init operations. Without this fix, iscsiadm can hang as the firmware will not respond to the iSCSI init message. Signed-off-by: NEddie Wai <eddie.wai@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 7月, 2013 6 次提交
-
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eddie Wai 提交于
Completion status field should also be checked for non-zero error condition. Signed-off-by: NEddie Wai <eddie.wai@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eddie Wai 提交于
Update TCP delayed ACK and timestamp options setup to match latest bnx2x firmware. Signed-off-by: NEddie Wai <eddie.wai@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eddie Wai 提交于
Without resetting it, the bnx2i driver cannot use different options for different iSCSI connections. Signed-off-by: NEddie Wai <eddie.wai@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Since unregister_netdevice_notifier() will replay the NETDEV_DOWN and NETDEV_UNREGISTER_EVENTS, the cnic_dev_list will be cleaned up automatically. The loop to cleanup the cnic_dev_list can be removed in cnic_release(). Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
After this earlier commit to simplify probing: commit 4bd9b0ff cnic, bnx2x, bnx2: Simplify cnic probing. we can now reliably receive netdev events and we can simplify the handling of these events. We now remove the logic that tries to handle missed NETDEV_REGISTER events. This change will allow cleanup to be simplified in the next patch. We can now rely on the play back of netdev events during unregister_netdevice_notifier() to cleanup the structures. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 5月, 2013 1 次提交
-
-
由 Jiri Pirko 提交于
So far, only net_device * could be passed along with netdevice notifier event. This patch provides a possibility to pass custom structure able to provide info that event listener needs to know. Signed-off-by: NJiri Pirko <jiri@resnulli.us> v2->v3: fix typo on simeth shortened dev_getter shortened notifier_info struct name v1->v2: fix notifier_call parameter in call_netdevice_notifier() Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 5月, 2013 1 次提交
-
-
由 Akinobu Mita 提交于
Use preferable function name which implies using a pseudo-random number generator. [akpm@linux-foundation.org: convert team_mode_random.c] Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Acked-by: NThomas Sailer <t.sailer@alumni.ethz.ch> Acked-by: Bing Zhao <bzhao@marvell.com> [mwifiex] Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Chan <mchan@broadcom.com> Cc: Thomas Sailer <t.sailer@alumni.ethz.ch> Cc: Jean-Paul Roubelat <jpr@f6fbb.org> Cc: Bing Zhao <bzhao@marvell.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com> Cc: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 4月, 2013 1 次提交
-
-
由 Bhanu Prakash Gollapudi 提交于
The firmware supports a maximum of 4K FCoE exchanges. In 4-port devices, or when working in multi-function mode, this resource needs to be distributed between the various possible FCoE functions. This information needs to be calculated by bnx2x and propagated into bnx2fc via cnic. bnx2fc can then use this value to calculate corresponding xid resources instead of using global constants. Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-