Auto-configure the maximum number of serial ports based on how many can
be present on the architecture:
  - 3 on H8/300,
  - 10 on SuperH,
  - 18 on Reneas ARM.

The default can still be overridden if CONFIG_EXPERT is enabled.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Implement serial console driver to complement earlycon.

Based on LeMaker linux-actions tree.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This implements an earlycon for Actions Semi S500/S900 SoCs.

Based on LeMaker linux-actions tree.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

AVR32 is gone. Now it's time to clean up the driver by removing
leftovers that was used by AVR32 related code.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NRichard Genoud <richard.genoud@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Nios2 currently uses its own early printk implementation, rather than
using unified earlycon support to show boot messages on altera_uart.

Add earlycon support to altera_uart so that other archs may use it.
Also, this (together with the corresponding patch for altera_jtaguart)
will allow the early printk implementation in arch/nios2 to be removed
in a future patch.

Cc: Ley Foon Tan <lftan@altera.com>
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The number of uartlites should be set by a kernel parameter instead of
using a #define. This allows the user to set the number of uartlites
using only kconfig and not modifying kernel source.

The uartlite is used by FPGAs that support a basically unlimited number
of uarts so limiting it at 16 dosn't make sense as users might need more
than that.
Signed-off-by: NSam Povilus <kernel.development@povil.us>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Nios2 currently uses its own early printk implementation, rather than
using unified earlycon support to show boot messages on altera_jtaguart
(and altera_uart for that matter).

Add earlycon support to altera_jtaguart so that other archs may use it. Also,
this will allow the early printk implementation in arch/nios2 to eventually be
removed in a future patch.

Cc: Ley Foon Tan <lftan@altera.com>
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This allows enabling earlycon for devices with a Lantiq serial console
by splitting lqasc_serial_port_write() from lqasc_console_write() and
re-using the new function for earlycon's write callback.

The kernel-parameter name matches the driver name ("lantiq"), similar
to how other drivers implement this.
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The STM32 serial port is SoC specific so no point enabling it
without the architecture enabled.
Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

pxa2xx-uart was a separate uart platform driver. It was declaring
the same device names and numbers as 8250 driver. As a result,
it was impossible to use 8250 driver on PXA SoCs.

Upon closer examination pxa2xx-uart turned out to be a clone of
8250_core driver.

Workaround for Erratum #19 according to Marvel(R) PXA270M Processor
Specification Update (April 19, 2010) is dropped. 8250_core reads
from FIFO immediately after checking DR bit in LSR.

The patch leaves the original SERIAL_PXA driver around. The original
driver is just marked DEPRECATED in Kconfig and C source. When
the original driver is considered safe to remove, no changes
to SERIAL_8250 will be necessary.

Compiling SERIAL_8250_CONSOLE and SERIAL_PXA_CONSOLE even without
SERIAL_8250_PXA breaks console for SERIAL_PXA. For this reasons, the new
and the original drivers are made mutually exclusive.
Signed-off-by: NSergei Ianovich <ynvich@gmail.com>
CC: Heikki Krogerus <heikki.krogerus@linux.intel.com>
CC: James Cameron <quozl@laptop.org>
CC: Robert Jarzmik <robert.jarzmik@free.fr>
CC: Russell King <linux@arm.linux.org.uk>
Reviewed-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
[rebased on v4.8]
Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If NO_DMA=y:

    drivers/built-in.o: In function `stm32_serial_remove':
    stm32-usart.c:(.text+0xcea1a): undefined reference to `bad_dma_ops'
    stm32-usart.c:(.text+0xcea7a): undefined reference to `bad_dma_ops'

Add a dependency on HAS_DMA to fix this.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NAlexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The MIPS based Boston platform provides a 25MHz clock to the UART.

Enable the driver for MIPS and add support in the driver to read
the frequency from device tree.
Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Enabling support for the UART on the ARM MPS2 platform only make sense
when compiling for the ARM MPS2 platform, unless compile-testing.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NVladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Enhance the Renesas SCI UART driver to add support for GPIO-controlled
modem lines (CTS, DSR, DCD, RNG, RTS, DTR), using the serial_mctrl_gpio
helpers.

GPIO-controlled modem lines can be used when dedicated modem lines are
not available. Invalid configurations specifying both GPIO RTS/CTS and
dedicated RTS/CTS are rejected.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds UART and a serial console driver for Microchip PIC32 class
devices.

[ralf@linux-mips.org: Resolved merge conflict.]
Signed-off-by: NAndrei Pistirica <andrei.pistirica@microchip.com>
Signed-off-by: NJoshua Henderson <joshua.henderson@microchip.com>
Reviewed-by: NAlan Cox <alan@linux.intel.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Cc: linux-api@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12101/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This adds support early console for MPS2 UART which can be enabled via
earlycon=mps2,0x40004000
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver adds support to the UART controller found on ARM MPS2
platform.
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Alphascale ASM9260 uart IP has some common registers with
Freescale STMP37XX. This patch provide changes which
allow to reuse mxs-auart.c code for ASM9260.
Reviewed-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NOleksij Rempel <linux@rempel-privat.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Enabling support for the UART on Marvell EBU SoCs only make sense when
compiling for Marvell EBU SoCs, unless compile-testing.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Split off the bulk of the existing meson_serial_console_write()
implementation into meson_serial_port_write() for implementing
meson_serial_early_console_write().

Use "meson" as the earlycon driver name, courtesy of Nicolas.
Signed-off-by: NNicolas Saenz Julienne <nicolassaenzj@gmail.com>
Acked-by: NCarlo Caione <carlo@endlessm.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Armada-3700's uart is a simple serial port, which doesn't
support. Configuring the modem control lines. The uart port has a 32
bytes Tx FIFO and a 64 bytes Rx FIFO

The uart driver implements the uart core operations. It also support the
system (early) console based on Armada-3700's serial port.

Known Issue:

The uart driver currently doesn't support clock programming, which means
the baud-rate stays with the default value configured by the bootloader
at boot time

[gregory.clement@free-electrons.com: Rewrite many part which are too long
to enumerate]
Signed-off-by: NWilson Ding <dingwei@marvell.com>
Signed-off-by: NNadav Haklai <nadavh@marvell.com>
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.

This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Microblaze currently uses the old earlyprintk system, rather than the
unified earlycon support, to show boot messages on uartlite. Add
earlycon support so that other archs using uartlite can benefit from
it. The new code in uartlite.c is copied almost verbatim from
arch/microblaze/kernel/early_printk.c.
Signed-off-by: NRich Felker <dalias@libc.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

"earlyprintk" is architecture specific option.
General "earlycon" option support is much better.
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
[uli: preserve other SCSCR bits when asserting RE and TE]
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
[geert: rewording, #ifdef rework]
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

It's old, messy and mostly unmaintained.
Remove it as suggested by Peter Hurley and Alan.
Signed-off-by: NFrederik Völkel <frederik.voelkel@fau.de>
Signed-off-by: NLukas Braun <lukas.braun@fau.de>
Reviewed-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

As the of-serial driver is now 8250 specific, we can move the
file to a more appropriate place in teh 8250 subdirectory and
adapt the Kconfig help text and file name.

I'm leaving the CONFIG_SERIAL_OF_PLATFORM symbol unchanged
to avoid breaking user configuration files unnecessarily.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The NWP serial driver is no longer needed, as the two users of
this hardware have migrated to a much faster generation hardware,
see https://en.wikipedia.org/wiki/QPACE2 for the replacement.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Benjamin Krill <ben@codiert.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If NO_DMA=y:

    ERROR: "dma_unmap_sg" [drivers/tty/serial/mxs-auart.ko] undefined!
    ERROR: "dma_map_sg" [drivers/tty/serial/mxs-auart.ko] undefined!

Add a dependency on HAS_DMA to fix this.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If NO_DMA=y:

    ERROR: "dma_unmap_sg" [drivers/tty/serial/imx.ko] undefined!
    ERROR: "dma_map_sg" [drivers/tty/serial/imx.ko] undefined!

Add a dependency on HAS_DMA to fix this.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If NO_DMA=y:

    drivers/built-in.o: In function `atmel_release_rx_dma':
    atmel_serial.c:(.text+0x2502e): undefined reference to `dma_unmap_sg'
    drivers/built-in.o: In function `atmel_release_tx_dma':
    atmel_serial.c:(.text+0x25080): undefined reference to `dma_unmap_sg'
    drivers/built-in.o: In function `atmel_tx_dma':
    atmel_serial.c:(.text+0x2517a): undefined reference to `dma_sync_sg_for_cpu'
    drivers/built-in.o: In function `atmel_release_tx_pdc':
    atmel_serial.c:(.text+0x252e6): undefined reference to `dma_unmap_single'
    drivers/built-in.o: In function `atmel_prepare_tx_pdc':
    atmel_serial.c:(.text+0x2531a): undefined reference to `dma_map_single'
    drivers/built-in.o: In function `atmel_release_rx_pdc':
    atmel_serial.c:(.text+0x25362): undefined reference to `dma_unmap_single'
    drivers/built-in.o: In function `atmel_tx_pdc':
    atmel_serial.c:(.text+0x25722): undefined reference to `dma_sync_single_for_cpu'
    drivers/built-in.o: In function `atmel_rx_from_pdc':
    atmel_serial.c:(.text+0x2601a): undefined reference to `dma_sync_single_for_cpu'
    drivers/built-in.o: In function `atmel_rx_from_dma':
    atmel_serial.c:(.text+0x261b2): undefined reference to `dma_sync_sg_for_cpu'
    atmel_serial.c:(.text+0x26264): undefined reference to `dma_sync_sg_for_cpu'
    drivers/built-in.o: In function `atmel_prepare_rx_pdc':
    atmel_serial.c:(.text+0x262de): undefined reference to `dma_unmap_single'
    atmel_serial.c:(.text+0x26308): undefined reference to `dma_map_single'

Add a dependency on HAS_DMA to fix this.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver works as a module, so mark it as a tristate config
instead of a bool.

Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Reviewed-by: NAndy Gross <agross@codeaurora.org>
Signed-off-by: NAndy Gross <agross@codeaurora.org>

Earlycon support for Freescale lpuart should only be enabled when
console support is enabled.

Fixes: 1d59b382 ("serial: fsl_lpuart: add earlycon support")
Acked-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for DT and command line based earlycon support for
lpuart and lpuart32 used on Freescale Vybrid and and QorIQ LS1021A
processors.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit also fixes compiler warnings and errors seen when building
on x86_64.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Earlycon allows to have an early debugging console that doesn't need
to be statically configured in the kernel config, like earlyprintk,
but is set up through the stdout-path DT property.

This allows to have the early debugging always built into the
kernel and enabled on demand without clashing between different boards
or architectures.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the SCI driver from the SHDMAE-specific partial DMA transfer
handling to the generic dmaengine residual data framework.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 8cd90e50 as with
this patch the serial console is broken on lots of platforms.
Reported-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Jun Nie <jun.nie@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Support ZTE uart with some registers differing offset.
Probe as platform device for not AMBA IP ID is
available on ZTE uart.
Signed-off-by: NJun Nie <jun.nie@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>