Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

module_spi_driver() makes the code simpler by eliminating
boilerplate code.
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to the changelog, asynchronous mode was dropped sometime
before v2.2. Let's get rid of the unused driver-specific async state as
well so that it doesn't show up when doing tree-wide tty work.
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The macro CN23XX_PEM_BAR1_INDEX_REG is being used to shift oct->pcie_port
(a u16) left 24 places. There are two subtle issues here, first the
shift gets promoted to an signed int and then sign extended to a u64.
If oct->pcie_port is 0x80 or more then the upper bits get sign extended
to 1. Secondly shfiting a u16 24 bits will lead to an overflow so it
needs to be cast to a u64 for all the bits to not overflow.

It is entirely possible that the u16 port value is never large enough
for this to fail, but it is useful to fix unintended overflows such
as this.

Fix this by casting the port parameter to the macro to a u64 before
the shift.

Addresses-Coverity: ("Unintended sign extension")
Fixes: 5bc67f58 ("liquidio: CN23XX register definitions")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The error check on err is always false as err is always 0 at the
port_found label. The code is redundant and can be removed.

Addresses-Coverity: ("Logically dead code")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-5.13-20210407' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2021-04-07

this is a pull request of 6 patches for net-next/master.

The first patch targets the CAN driver infrastructure, it improves the
alloc_can{,fd}_skb() function to set the pointer to the CAN frame to
NULL if skb allocation fails.

The next patch adds missing error handling to the m_can driver's RX
path (the code was introduced in -next, no need to backport).

In the next patch an unused constant is removed from an enum in the
c_can driver.

The last 3 patches target the mcp251xfd driver. They add BQL support
and try to work around a sometimes broken CRC when reading the TBC
register.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Here is only one place where we want to specify new_ifindex. In all
other cases, callers pass 0 as new_ifindex. It looks reasonable to add a
low-level function with new_ifindex and to convert
dev_change_net_namespace to a static inline wrapper.

Fixes: eeb85a14 ("net: Allow to specify ifindex when device is moved to another namespace")
Suggested-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NAndrei Vagin <avagin@gmail.com>
Acked-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In this case, we don't need to check that new_ifindex is positive in
validate_linkmsg.

Fixes: eeb85a14 ("net: Allow to specify ifindex when device is moved to another namespace")
Suggested-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NAndrei Vagin <avagin@gmail.com>
Acked-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2021-04-06

Introduce TC sample offload

Background
----------

The tc sample action allows user to sample traffic matched by tc
classifier. The sampling consists of choosing packets randomly and
sampling them using psample module.

The tc sample parameters include group id, sampling rate and packet's
truncation (to save kernel-user traffic).

Sample in TC SW
---------------

User must specify rate and group id for sample action, truncate is
optional.

tc filter add dev enp4s0f0_0 ingress protocol ip prio 1 flower	\
	src_mac 02:25:d0:14:01:02 dst_mac 02:25:d0:14:01:03	\
	action sample rate 10 group 5 trunc 60			\
	action mirred egress redirect dev enp4s0f0_1

The tc sample action kernel module 'act_sample' will call another
kernel module 'psample' to send sampled packets to userspace.

MLX5 sample HW offload - MLX5 driver patches
--------------------------------------------

The sample action is translated to a goto flow table object
destination which samples packets according to the provided
sample ratio. Sampled packets are duplicated. One copy is
processed by a termination table, named the sample table,
which sends the packet to the eswitch manager port (that will
be processed by software).

The second copy is processed by the default table which executes
the subsequent actions. The default table is created per <vport,
chain, prio> tuple as rules with different prios and chains may
overlap.

For example, for the following typical flow table:

+-------------------------------+
+       original flow table     +
+-------------------------------+
+         original match        +
+-------------------------------+
+ sample action + other actions +
+-------------------------------+

We translate the tc filter with sample action to the following HW model:

        +---------------------+
        + original flow table +
        +---------------------+
        +   original match    +
        +---------------------+
                   |
                   v
+------------------------------------------------+
+                Flow Sampler Object             +
+------------------------------------------------+
+                    sample ratio                +
+------------------------------------------------+
+    sample table id    |    default table id    +
+------------------------------------------------+
           |                            |
           v                            v
+-----------------------------+  +----------------------------------------+
+        sample table         +  + default table per <vport, chain, prio> +
+-----------------------------+  +----------------------------------------+
+ forward to management vport +  +            original match              +
+-----------------------------+  +----------------------------------------+
                                 +            other actions               +
                                 +----------------------------------------+

Flow sampler object
-------------------

Hardware introduces flow sampler object to do sample. It is a new
destination type. Driver needs to specify two flow table ids in it.
One is sample table id. The other one is the default table id.
Sample table samples the packets according to the sample rate and
forward the sampled packets to eswitch manager port. Default table
finishes the subsequent actions.

Group id and reg_c0
-------------------

Userspace program will take different actions for sampled packets
according to tc sample action group id. So hardware must pass group
id to software for each sampled packets. In Paul Blakey's "Introduce
connection tracking offload" patch set, reg_c0 lower 16 bits are used
for miss packet chain id restore. We convert reg_c0 lower 16 bits to
a common object pool, so other features can also use it.

Since sample group id is 32 bits, create a 16 bits object id to map
the group id and write the object id to reg_c0 lower 16 bits. reg_c0
can only be used for matching. Write reg_c0 to flow_tag, so software
can get the object id via flow_tag and find group id via the common
object pool.

Sampler restore handle
----------------------

Use common object pool to create an object id to map sample parameters.
Allocate a modify header action to write the object id to reg_c0 lower
16 bits. Create a restore rule to pass the object id to software. So
software can identify sampled packets via the object id and send it to
userspace.

Aggregate the modify header action, restore rule and object id to a
sample restore handle. Re-use identical sample restore handle for
the same object id.

Send sampled packets to userspace
---------------------------------

The destination for sampled packets is eswitch manager port, so
representors can receive sampled packets together with the group id.
Driver will send sampled packets and group id to userspace via psample.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In function fdp_nci_patch_otp and fdp_nci_patch_ram，many goto
out statements are used, and out label just return variable r.
in some places,just jump to the out label, and in other places,
assign a value to the variable r,then jump to the out label.
It is unnecessary, we just use return sentences to replace goto
sentences and delete out label.
Signed-off-by: Nwengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Disable software thermal protection by removing critical trip points
from all thermal zones.

The software thermal protection is redundant given there are two layers
of protection below it in firmware and hardware. The first layer is
performed by firmware, the second, in case firmware was not able to
perform protection, by hardware.
The temperature threshold set for hardware protection is always higher
than for firmware.
Signed-off-by: NVadim Pasternak <vadimp@nvidia.com>
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

EHL PSE SGMII mode requires to ungate the SERDES PHY rx clk for power up
sequence and vice versa.
Signed-off-by: NVoon Weifeng <weifeng.voon@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing kdoc for phy tunable callbacks.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: Cleanup, a new test case, and header trimming

Some more patches to include from the MPTCP tree:

Patches 1-6 refactor an address-related data structure and reduce some
duplicate code that handles IPv4 and IPv6 addresses.

Patch 7 adds a test case for the MPTCP netlink interface, passing a
specific ifindex to the kernel.

Patch 8 drops extra header options from IPv4 address echo packets,
improving consistency and testability between IPv4 and IPv6.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current Linux carries echo-ed ADD_ADDR over pure TCP ACKs, so there is no
need to add a DSS element that would fit only ADD_ADDR with IPv4 address.
Drop the DSS from echo-ed ADD_ADDR, regardless of the IP version.
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch added a new testcase for setting the net device name. In it,
pass the net device name to pm_nl_ctl to set the ifindex field of struct
mptcp_pm_addr_entry.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The length of the IPv4 address is 4 octets and IPv6 is 16. That's the only
difference between add_addr_generate_hmac and add_addr6_generate_hmac.

This patch dropped the duplicate code and unify them into one.
Co-developed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since the type of the address family in struct mptcp_options_received
became sa_family_t, we should set AF_INET/AF_INET6 to it, instead of
using MPTCP_ADDR_IPVERSION_4/6.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch added a new struct mptcp_addr_info member addr in struct
mptcp_options_received, and dropped the original family, addr_id, addr,
addr6 and port fields in it. Then we can pass the parameter mp_opt.addr
directly to mptcp_pm_add_addr_received and mptcp_pm_add_addr_echoed.

Since the port number became big-endian now, use htons to convert the
incoming port number to it. Also use ntohs to convert it when passing
it to add_addr_generate_hmac or printing it out.
Co-developed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since the family field was added in struct mptcp_out_options, no need to
use OPTION_MPTCP_ADD_ADDR6 to identify the IPv6 address. Drop it.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moved the mptcp_addr_info struct from protocol.h to mptcp.h,
added a new struct mptcp_addr_info member addr in struct mptcp_out_options,
and dropped the original addr, addr6, addr_id and port fields in it. Then
we can use opts->addr to get the adding address from PM directly using
mptcp_pm_add_addr_signal.

Since the port number became big-endian now, use ntohs to convert it
before sending it out with the ADD_ADDR suboption. Also convert it
when passing it to add_addr_generate_hmac or printing it out.
Co-developed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moved the flags and ifindex fields from struct mptcp_addr_info
to struct mptcp_pm_addr_entry. Add the flags and ifindex values as two new
parameters to __mptcp_subflow_connect.

In mptcp_pm_create_subflow_or_signal_addr, pass the local address entry's
flags and ifindex fields to __mptcp_subflow_connect.

In mptcp_pm_nl_add_addr_received, just pass two zeros to it.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MCP251XFD_REG_TBC is the time base counter register. It increments
once per SYS clock tick, which is 20 or 40 MHz. Observation shows that
if the lowest byte (which is transferred first on the SPI bus) of that
register is 0x00 or 0x80 the calculated CRC doesn't always match the
transferred one.

To reproduce this problem let the driver read the TBC register in a
high frequency. This can be done by attaching only the mcp251xfd CAN
controller to a valid terminated CAN bus and send a single CAN frame.
As there are no other CAN controller on the bus, the sent CAN frame is
not ACKed and the mcp251xfd repeats it. If user space enables the bus
error reporting, each of the NACK errors is reported with a time
stamp (which is read from the TBC register) to user space.

$ ip link set can0 down
$ ip link set can0 up type can bitrate 500000 berr-reporting on
$ cansend can0 4FF#ff.01.00.00.00.00.00.00

This leads to several error messages per second:

| mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=00 3a 86 da, CRC=0x7753) retrying.
| mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=80 01 b4 da, CRC=0x5830) retrying.
| mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=00 e9 23 db, CRC=0xa723) retrying.
| mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=00 8a 30 db, CRC=0x4a9c) retrying.
| mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=80 f3 43 db, CRC=0x66d2) retrying.

If the highest bit in the lowest byte is flipped the transferred CRC
matches the calculated one. We assume for now the CRC calculation in
the chip works on wrong data and the transferred data is correct.

This patch implements the following workaround:

- If a CRC read error on the TBC register is detected and the lowest
  byte is 0x00 or 0x80, the highest bit of the lowest byte is flipped
  and the CRC is calculated again.
- If the CRC now matches, the _original_ data is passed to the reader.
  For now we assume transferred data was OK.

Link: https://lore.kernel.org/r/20210406110617.1865592-5-mkl@pengutronix.de
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

This patch factors out the crc check into a separate function. This is
preparation for the next patch.

Link: https://lore.kernel.org/r/20210406110617.1865592-4-mkl@pengutronix.de
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

This patch re-adds BQL support to the driver. Support for
netdev_xmit_more() will be added in a separate patch series.

Link: https://lore.kernel.org/r/20210406110617.1865592-3-mkl@pengutronix.de
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

This patch removes the unused enum BOSCH_C_CAN_PLATFORM.

Link: https://lore.kernel.org/r/20210406110617.1865592-2-mkl@pengutronix.deSigned-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

In commit 1be37d3b ("can: m_can: fix periph RX path: use
rx-offload to ensure skbs are sent from softirq context") the RX path
for peripherals (i.e. SPI based m_can controllers) was converted to
the rx-offload infrastructure. However, the error handling for
can_rx_offload_queue_sorted() was forgotten.
can_rx_offload_queue_sorted() will return with an error if the
internal queue is full.

This patch adds the missing error handling, by increasing the
rx_fifo_errors.

Fixes: 1be37d3b ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context")
Link: https://lore.kernel.org/r/20210401084515.1455013-1-mkl@pengutronix.deReported-by: Ncoverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1503583 ("Error handling issues")
Reviewed-by: NKees Cook <keescook@chromium.org>
Cc: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The handling of CAN bus errors typically consist of allocating a CAN
error SKB using alloc_can_err_skb() followed by stats handling and
filling the error details in the newly allocated CAN error SKB. Even
if the allocation of the SKB fails the stats handling should not be
skipped.

The common pattern in CAN drivers is to allocate the skb and work on
the struct can_frame pointer "cf", if it has been assigned by
alloc_can_err_skb().

|	skb = alloc_can_err_skb(priv->ndev, &cf);
|
| 	/* RX errors */
| 	if (bdiag1 & (MCP251XFD_REG_BDIAG1_DCRCERR |
| 		      MCP251XFD_REG_BDIAG1_NCRCERR)) {
| 		netdev_dbg(priv->ndev, "CRC error\n");
|
| 		stats->rx_errors++;
| 		if (cf)
| 			cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ;
| 	}

In case of an OOM alloc_can_err_skb() returns NULL, but doesn't set
"cf" to NULL as well. For the above pattern to work the "cf" has to be
initialized to NULL, which is easily forgotten.

To solve this kind of problems, set "cf" to NULL if
alloc_can_err_skb() returns NULL.

Link: https://lore.kernel.org/r/20210402102245.1512583-1-mkl@pengutronix.deSuggested-by: NVincent MAILHOL <mailhol.vincent@wanadoo.fr>
Reviewed-by: NVincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The following diagram illustrates the hardware model for tc sample action:

        +---------------------+
        + original flow table +
        +---------------------+
        +   original match    +
        +---------------------+
                   |
                   v
+------------------------------------------------+
+                Flow Sampler Object             +
+------------------------------------------------+
+                    sample ratio                +
+------------------------------------------------+
+    sample table id    |    default table id    +
+------------------------------------------------+
           |                            |
           v                            v
+-----------------------------+  +----------------------------------------+
+        sample table         +  + default table per <vport, chain, prio> +
+-----------------------------+  +----------------------------------------+
+ forward to management vport +  +            original match              +
+-----------------------------+  +----------------------------------------+
                                 +            other actions               +
                                 +----------------------------------------+

The sample action is translated to a goto flow table object
destination which samples packets according to the provided
sample ratio. Sampled packets are duplicated. One copy is
processed by a termination table, named the sample table,
which sends the packet to the eswitch manager port (that will
be processed by software).

The second copy is processed by the default table which executes
the subsequent actions. The default table is created per <vport,
chain, prio> tuple as rules with different prios and chains may
overlap.
Signed-off-by: NChris Mi <cmi@nvidia.com>
Reviewed-by: NOz Shlomo <ozsh@nvidia.com>
Reviewed-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Mark the sampled packets with a sample restore object. Send sampled
packets using the psample api.
Signed-off-by: NChris Mi <cmi@nvidia.com>
Reviewed-by: NOz Shlomo <ozsh@nvidia.com>
Reviewed-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

As a pre-step to process sampled packet in this function.
Signed-off-by: NChris Mi <cmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Use common object pool to create an object ID to map sample parameters.
Allocate a modify header action to write the object ID to reg_c0 lower
16 bits. Create a restore rule to pass the object ID to software. So
software can identify sampled packets via the object ID and send it to
userspace.

Aggregate the modify header action, restore rule and object ID to a
sample restore handle. Re-use identical sample restore handle for
the same object ID.
Signed-off-by: NChris Mi <cmi@nvidia.com>
Reviewed-by: NOz Shlomo <ozsh@nvidia.com>
Reviewed-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

In order to offload sample action, HW introduces sampler object. The
sampler object samples packets according to the provided sample ratio.
Sampled packets are duplicated. One copy is processed by a termination
table, named the sample table, which sends the packet up to software.
The second copy is processed by the default table.

Instantiate sampler object. Re-use identical sampler object for
the same sample ratio, sample table and default table as a prestep for
offloading tc sample actions.
Signed-off-by: NChris Mi <cmi@nvidia.com>
Reviewed-by: NOz Shlomo <ozsh@nvidia.com>
Reviewed-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Sampled packets are sent to software using termination tables. There
is only one rule in that table that is to forward sampled packets to
the e-switch management vport.

Create a sampler termination table and rule for each eswitch.
Signed-off-by: NChris Mi <cmi@nvidia.com>
Reviewed-by: NOz Shlomo <ozsh@nvidia.com>
Reviewed-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Parse TC sample action and save sample parameters in flow attribute
data structure.
Signed-off-by: NChris Mi <cmi@nvidia.com>
Reviewed-by: NOz Shlomo <ozsh@nvidia.com>
Reviewed-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Currently, the u32 chain id is mapped to u16 value which is stored on
the lower 16 bits of reg_c0 for FDB and reg_b for NIC tables. The
mapping is internally maintained by the chains object. However, with
the introduction of reg_c0 objects the fdb may store more than just
the chain id on reg_c0. This is not relevant for NIC tables.

Separate the chains mapping instantiation for FDB and NIC tables.
Remove the mapping from the chains object. For FDB tables, create
the mapping per eswitch. For NIC tables, create the mapping per tc
table. Pass the corresponding mapping pointer when creating the
chains object.
Signed-off-by: NChris Mi <cmi@nvidia.com>
Reviewed-by: NOz Shlomo <ozsh@nvidia.com>
Reviewed-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Currently reg_c0 lower 16 bits and reg_b are used to store the chain
id that missed in FDB and NIC tables accordingly. However, the
registers' values may index a restore object, rather than a single u32
value. Different object types can be used to restore mutually exclusive
contexts such as chain id and sample group id.

Use the mapping object to associate an index with a restore object
as a prestep for supporting additional restore types.
Signed-off-by: NChris Mi <cmi@nvidia.com>
Reviewed-by: NOz Shlomo <ozsh@nvidia.com>
Reviewed-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>