There is no need to map offset of local dquot structure to on disk block
in each quota write. It is enough to map it just once and store the physical
block number in quota structure in memory. Moreover this simplifies locking
as we do not have to take ip_alloc_sem from quota write path.
Acked-by: NJoel Becker <Joel.Becker@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Currently, __dquot_transfer() acquires its own references of dquot structures
that will be put into inode. But for OCFS2, this creates a lock inversion
between dq_lock (waited on in dqget) and transaction start (started in
ocfs2_setattr). Currently, deadlock is impossible because dq_lock is acquired
only during dquot_acquire and dquot_release and we already hold a reference to
dquot structures in ocfs2_setattr so neither of these functions can be called
while we call dquot_transfer. But this is rather subtle and it is hard to teach
lockdep about it. So provide __dquot_transfer function that can be passed dquot
references directly. OCFS2 can then pass acquired dquot references directly to
__dquot_transfer with proper locking.
Signed-off-by: NJan Kara <jack@suse.cz>

Quota must being initialized if size or uid/git changes requested.
But initialization performed in two different places:
in case of i_size file system is responsible for dquot init
, but in case of uid/gid init will be called internally in
dquot_transfer().
This ambiguity makes code harder to understand.
Let's move this logic to one common helper function.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

The methods already do these checks, so remove them in the quotactl
implementation to allow non-VFS quota implementations to also support
these calls.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Pass the larger struct fs_disk_quota to the ->set_dqblk operation so
that the Q_SETQUOTA and Q_XSETQUOTA operations can be implemented
with a single filesystem operation and we can retire the ->set_xquota
operation.  The additional information (RT-subvolume accounting and
warn counts) are left zero for the VFS quota implementation.

Add new fieldmask values for setting the numer of blocks and inodes
values which is required for the VFS quota, but wasn't for XFS.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Pass the larger struct fs_disk_quota to the ->get_dqblk operation so
that the Q_GETQUOTA and Q_XGETQUOTA operations can be implemented
with a single filesystem operation and we can retire the ->get_xquota
operation.  The additional information (RT-subvolume accounting and
warn counts) are left zero for the VFS quota implementation.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

ext4 was updated to accept barrier/nobarrier mount options
in addition to the older barrier=0/1.  The barrier story
is complex enough, we should help people by making the options
the same at least, even if the defaults are different.

This patch allows the barrier/nobarrier mount options for ext3,
while keeping nobarrier the default.

It also unconditionally displays barrier status in show_options,
and prints a message at mount time if barriers are not enabled,
just as ext4 does.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Quota stats is mostly writable data structure. Let's alloc percpu
bucket for each value.

NOTE: dqstats_read() function is racy against dqstats_{inc,dec}
and may return inconsistent value. But this is ok since absolute
accuracy is not required.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

Suppress compilation warning: "quotatypes" defined but not used.
quotatypes is used only when CONFIG_QUOTA_DEBUG or CONFIG_PRINT_QUOTA_WARNING
is/are defined.
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NJan Kara <jack@suse.cz>

log_start_commit() returns 1 only when it started a transaction
commit. Thus in case transaction commit is already running, we
fail to wait for the commit to finish. Fix the issue by always
waiting for the commit regardless of the log_start_commit return
value.
Signed-off-by: NJan Kara <jack@suse.cz>

Provide a function which returns whether a transaction with given tid
will send a barrier to the filesystem device. The function will be used
by ext3 to detect whether fsync needs to send a separate barrier or not.
Signed-off-by: NJan Kara <jack@suse.cz>

generic setattr not longer responsible for quota transfer.
use ufs_setattr for all ufs's inodes.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

The BKL is still used in ext2_put_super(), ext2_fill_super(), ext2_sync_fs()
ext2_remount() and ext2_write_inode(). From these calls ext2_put_super(),
ext2_fill_super() and ext2_remount() are protected against each other by
the struct super_block s_umount rw semaphore. The call in ext2_write_inode()
could only protect the modification of the ext2_sb_info through
ext2_update_dynamic_rev() against concurrent ext2_sync_fs() or ext2_remount().
ext2_fill_super() and ext2_put_super() can be left out because you need a
valid filesystem reference in all three cases, which you do not have when
you are one of these functions.

If the BKL is only protecting the modification of the ext2_sb_info it can
safely be removed since this is protected by the struct ext2_sb_info s_lock.
Signed-off-by: NJan Blunck <jblunck@suse.de>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJan Kara <jack@suse.cz>

Add a spinlock that protects against concurrent modifications of
s_mount_state, s_blocks_last, s_overhead_last and the content of the
superblock's buffer pointed to by sbi->s_es. The spinlock is now used in
ext2_xattr_update_super_block() which was setting the
EXT2_FEATURE_COMPAT_EXT_ATTR flag on the superblock without protection
before. Likewise the spinlock is used in ext2_show_options() to have a
consistent view of the mount options.

This is a preparation patch for removing the BKL from ext2 in the next
patch.
Signed-off-by: NJan Blunck <jblunck@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jan Kara <jack@suse.cz>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NJan Kara <jack@suse.cz>

Move ext2_write_super() out of ext2_setup_super() as a preparation for the
next patch that adds a new lock for superblock fields.
Signed-off-by: NJan Blunck <jblunck@suse.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Both function originally did similar things except that ext2_sync_super()
is returning after the call to sync_dirty_buffer(sbh). Therefore this
patch adds a wait flag to tell ext2_sync_super() if it has to call
sync_dirty_buffer() to wait for in-progress I/O to finish.
Signed-off-by: NJan Blunck <jblunck@suse.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Depending in the state (valid or unchecked) of the filesystem either
ext2_sync_super() or ext2_commit_super() is called. If the filesystem is
currently valid (it is checked), we first mark it unchecked and afterwards
duplicate the work that ext2_sync_super() is doing later. Therefore this
patch removes the duplicate code and calls ext2_sync_super() directly after
marking the filesystem unchecked.
Signed-off-by: NJan Blunck <jblunck@suse.de>
Signed-off-by: NJan Kara <jack@suse.cz>

This is probably a typo since the write time should actually be updated by
ext2_sync_fs() instead of the mount time.
Signed-off-by: NJan Blunck <jblunck@suse.de>
Signed-off-by: NJan Kara <jack@suse.cz>

ext2_sync_fs() used to duplicate the code from ext2_clear_super_error().
Signed-off-by: NJan Blunck <jblunck@suse.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Currently block/inode/dir counters are initialized before journal was
recovered. In fact after journal recovery this info will probably
change which results in incorrect numbers returned from statfs(2).
BUG:#15768
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

This patch removes a useless call to brelse(bitmap_bh) since at that
point bitmap_bh is NULL and slightly cleans up bitmap_bh handling.
Signed-off-by: NFrancis Moreau <francis.moro@gmail.com>
Signed-off-by: NJan Kara <jack@suse.cz>

- Skip locking if quota is dirty already.
- Return old quota state to help fs-specciffic implementation to optimize
  case where quota was dirty already.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

There is no point in loading bitmap for groups which are completely full.
This causes noticeable performance problems (and memory pressure) on small
systems with large full filesystem
(http://marc.info/?l=linux-ext4&m=126843108314310&w=2).

Port of the same ext3 patch.
Signed-off-by: NJan Kara <jack@suse.cz>

There is no point in loading bitmap for groups which are completely full.
This causes noticeable performance problems (and memory pressure) on small
systems with large full filesystem
(http://marc.info/?l=linux-ext4&m=126843108314310&w=2).

Jan Kara: Added a comment and changed check to use cpu-endian value.
Signed-off-by: N"Frans van de Wiel" <fvdw@fvdw.eu>
Signed-off-by: NJan Kara <jack@suse.cz>

This patch modifies the fs/timerfd.c to use the newly created
wait_event_interruptible_locked_irq() macro.  This replaces an open
code implementation with a single macro call.
Signed-off-by: NMichal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is the culmination of this sequence of patches. By moving the block
erasing from jffs2_write_super() into the GC code, we avoid huge
latencies on unmount where it waits for _all_ pending blocks to be
erased, and we allow better control for time-critical tasks by stopping
the GC thread.
Signed-off-by: NJoakim Tjernlund <joakim.tjernlund@transmode.se>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Now that we do erases from GC and trigger the GC thread to do them
instead of using kupdated, this function is misnamed. It's only used
for triggering wbuf flush on NAND flash now. Rename it accordingly.
Signed-off-by: NJoakim Tjernlund <joakim.tjernlund@transmode.se>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This is now done in a GC pass; we don't need to trigger kupdated to do it.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

We're about to call this from a bunch of places which already hold
c->erase_completion_lock, so add an assertion and change its existing
callers to do the same.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Now that we trigger block erases from jffs2_garbage_collect_pass(),
adjust jffs2_thread_should_wake() to return 1 when there are blocks to
erase.
Signed-off-by: NJoakim Tjernlund <joakim.tjernlund@transmode.se>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

jffs2_garbage_collect_pass() would previously return -EAGAIN if it
couldn't find anything to garbage collect from, and there were blocks on
the erase_pending_list. If the blocks were actually in the process of
being erased, though, then they wouldn't be on that list. Check for
nr_erasing_blocks being non-zero instead.

Fix jffs2_reserve_space() to wait for the in-progress erases to
complete, when jffs2_garbage_collect_pass() returns -EAGAIN.

And fix jffs2_erase_succeeded() to actually wake up the erase_wait wq
that jffs2_reserve_space() is now using.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

We're about to start calling this from the jffs2_garbage_collect_pass(), and
we'll want to know whether it actually did anything or not.
Signed-off-by: NJoakim Tjernlund <joakim.tjernlund@transmode.se>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

And also drop a useless argument to xfs_iomap_write_direct.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Rename all iomap_valid identifiers to imap_valid to fit the new
world order, and clean up xfs_iomap_valid to convert the passed in
offset to blocks instead of the imap values to bytes.  Use the
simpler inode->i_blkbits instead of the XFS macros for this.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

The IOMAP_ flags are now only used inside xfs_aops.c for extent
probing and I/O completion tracking, so more them here, and rename
them to IO_* as there's no mapping involved at all.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Now that struct xfs_iomap contains exactly the same units as struct
xfs_bmbt_irec we can just use the latter directly in the aops code.
Replace the missing IOMAP_NEW flag with a new boolean output
parameter to xfs_iomap.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Report the iomap_bn field of struct xfs_iomap in terms of filesystem
blocks instead of in terms of bytes.  Shift the byte conversions
into the caller, and replace the IOMAP_DELAY and IOMAP_HOLE flag
checks with checks for HOLESTARTBLOCK and DELAYSTARTBLOCK.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Report the iomap_offset and iomap_bsize fields of struct xfs_iomap
in terms of fsblocks instead of in terms of disk blocks.  Shift the
byte conversions into the callers temporarily, but they will
disappear or get cleaned up later.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>