SDMA FW fixes the hang issue for adding heavy-weight TLB
flush on Arcturus, so we can enable it.
Signed-off-by: NEric Huang <jinhuieric.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Debug VRAM access through SDMA has several broken parts resulting in
silent MMIO fallback.

BO kernel creation takes the location of the cpu addr pointer, not
the pointer itself for address kmap.

drm_dev_enter return true on success so change access check.

The source BO is reserved but not pinned so find the address using the
cursor offset relative to its memory domain start.
Signed-off-by: NJonathan Kim <jonathan.kim@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

That's just a leftover from old radeon days and was preventing CS and GART
bindings before the hardware was initialized. But nowdays that is
perfectly valid.

The only thing we need to warn about are GART binding before the table
is even allocated.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NStanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove set but unused variable.
warning: variable 'umc_reg_offset' set but not used
Signed-off-by: Nmziya <Mohammadzafar.ziya@amd.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove repeated calls.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch will modify a pair of functions for pcie port wreg/rreg.
AMD GPU have had an independent NBIO block from SOC15 arch.
If the dirver wants to read/write the address space of the pcie devices,
it has to go through the NBIO block.
This patch will move the pcie port wreg/rreg functions to
"amdgpu_device.c", so that to reuse the functions on the
future GPU ASICs.
Signed-off-by: NXiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch will add vram check function for GMC block.
It will write pattern data to the vram and then read back from the vram,
so that to verify the work status of vram.
This patch  will cover gmc v6/7/8/9/10.
Signed-off-by: NXiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Return value from amdgpu_bo_create_kernel() directly instead
of taking this in another redundant variable.
Reported-by: NZeal Robot <zealci@zte.com.cn>
Signed-off-by: NMinghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: NCGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

I met a bug recently and the kernel log:

[  330.171875] radeon 0000:03:00.0: couldn't schedule ib
[  330.175781] [drm:radeon_uvd_suspend [radeon]] *ERROR* Error destroying UVD (-22)!

In radeon drivers, using UVD suspend is as follows:

if (rdev->has_uvd) {
        uvd_v1_0_fini(rdev);
        radeon_uvd_suspend(rdev);
}

In radeon_ib_schedule function, we check the 'ring->ready' state,
but in uvd_v1_0_fini funciton, we've cleared the ready state.
So, just modify the suspend code flow to fix error.
Reviewed-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NQiang Ma <maqianga@uniontech.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, thus a matching decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: NYongzhi Liu <lyz_cs@pku.edu.cn>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The calcs folder has FPU code on it, which should be isolated inside the
DML folder as per https://patchwork.freedesktop.org/series/93042/.

This commit aims single-handedly to correct the location of such FPU
code and does not refactor any functions.

Changes since v2:
- Corrected problems to compile when DCN was disabled.
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NIsabella Basso <isabbasso@riseup.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along following fixes:

- Organize FPU associated code to DML
- Modify SMU_TIMEOUT macro
- Organize dcn201 code
- Address DS stays disabled problem under specific scenario
- Fix black screen issue
- Update DML to rev.99
- Address problem of eDP hot-plug feature
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
For allow eDP hot-plug feature, the stream signal may change to VIRTUAL
when plug-out and back to eDP when plug-in. OS will still setPathMode
with same timing for each plugging, but eDP gets no stream update as we
don't check signal type changing back as keeping it VIRTUAL. It's also
unsafe for future cases that stream signal is switched with same timing.

[How]
Check stream signal type change include previous HDMI signal case.
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NDale Zhao <dale.zhao@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
1. update dml to rev.99
2. add smu clk table w/a: smu gives 1 dtm level with mismatch votage
   table which causes multiple issues.
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
With some monitors when multi plane overlay is enabled the memory
clock switching mechanism has to change and, due to an error in the
initialization sequence, it may cause a black screen.

[HOW]
Change the firmware assisted memory clock switch initialization and
tear-down sequence utilizing the prepare_bandwidth and
optimize_bandwidth contexts.
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NFelipe Clark <feclark@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
On HG APU + dGPU scenario with no display to dGPU,
DS stays disabled due to no display present.
This problem can be worked around by DAL calling
DCEFCLK DS message to SMU on clk init.

[How]
Call DCEFCLK DS message to SMU on clk init.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NChris Park <Chris.Park@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
If some SMU features are not enabled, SMU will return fail to that
message.

[HOW]
SMU_TIMEOUT macro will treat "return fail" as timeout also.
Correct the macro to only report timeout case.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NIan Chen <ian.chen@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
As part of the FPU isolation work documented in
https://patchwork.freedesktop.org/series/93042/, isolate
code that uses FPU in DCN302 to DML, where all FPU code
should locate.
Co-authored-by: NJasdeep Dhillon <jdhillon@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NJasdeep Dhillon <jdhillon@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings improvements in the following:

- Drop unnecessary DCN guards
- Improve Z9 interface
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Need to disable Z9 on configurations that only support Z10

[How]
Support new PMFW interface to disable Z9
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Might potentially have truncation problem with the implicit casting
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
- We only ever want seamless boots on eDPs
- The naming and logic did not match the context

[HOW]
- Removed unnecessary if statements
- Renamed power_down_display_on_boot to seamless_boot_edp_requested and
swapped the logic
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NJarif Aftab <jaraftab@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The return value was never initialized so the cleanup code executed when
it isn't even necessary.

Just add proper error handling.

Fixes: ab50cb9d ("drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()")
Signed-off-by: NChristian König <christian.koenig@amd.com>
Tested-by: NJan Stancek <jstancek@redhat.com>
Tested-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable power level, power limit and fan speed
information retrieval in one VF mode.
This is required so that tool ROCM-SMI
can provide this information to users.
Signed-off-by: NMarina Nikolic <Marina.Nikolic@amd.com>
Acked-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevinyang.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
This fixes 892deb48 ("drm/amdgpu: Separate vf2pf work item init from virt data exchange").
we should read pf2vf data based at mman.fw_vram_usage_va after gmc
sw_init. commit 892deb48 breaks this logic.

[How]
calling amdgpu_virt_exchange_data in amdgpu_virt_init_data_exchange to
set the right base in the right sequence.

v2:
call amdgpu_virt_init_data_exchange after gmc sw_init to make data
exchange workqueue run

v3:
clean up the code logic

v4:
add some comment and make the code more readable

Fixes: 892deb48 ("drm/amdgpu: Separate vf2pf work item init from virt data exchange")
Signed-off-by: NJingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: NHorace Chen <horace.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix the code style warnings in hdp xgmi mca and umc:
1. WARNING: missing space after struct definition.
2. WARNING: please, no space before tabs.
3. WARNING: line length of xxx exceeds 100 columns.
4. ERROR: "foo* bar" should be "foo *bar".
5. ERROR: space required before the open parenthesis '('.
6. ERROR: space prohibited after that open parenthesis '('.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the code style warnings in sdma:
1. WARNING: Missing a blank line after declarations.
2. ERROR: that open brace { should be on the previous line.
3. WARNING: unnecessary whitespace before a quoted newline.
4. ERROR: space required after that ',' (ctx:VxV).
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the code style warnings in gmc:
ERROR: space required after that ',' (ctx:VxV).
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the code style warnings in gfx:
1. WARNING: suspect code indent for conditional statements.
2. ERROR: spaces required around that '=' (ctx:WxV).
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the code style warnings in amdgpu_ras:
1. ERROR: space required before the open parenthesis '('.
2. WARNING: line length of xxx exceeds 100 columns.
3. ERROR: "foo* bar" should be "foo *bar".
4. WARNING: unnecessary whitespace before a quoted newline.
5. WARNING: space prohibited before semicolon.
6. WARNING: suspect code indent for conditional statements.
7. WARNING: braces {} are not necessary for single statement blocks.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is a following patch to apply the workaround only on
those boards with a bad harvest table in ip discovery.
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Early check in amdgpu_discovery_reg_base_init promises this.
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Changed from v1:
    remove unused brace
Signed-off-by: NStanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

support ECC TABLE message, this table include umc ras error count
and error address

V2:
	Return after smu version check fail

V3:
	Return -EOPNOTSUPP, if fail to get smc ver.

V4:
	ECCTABLE typo corrected and sentence rephrased.
Signed-off-by: Nmziya <Mohammadzafar.ziya@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add smu message query error information interface,

function name align with IP version number

V2:
	Removed unused err cnt entry
Signed-off-by: Nmziya <Mohammadzafar.ziya@amd.com>
Acked-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NStanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

update smu driver if version to 0x40

V2:
	Interface version append with sienna_cichlid
V3:
	Aligned with latest driver interface.
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Nmziya <Mohammadzafar.ziya@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The WA from commit 2a50edbf ("drm/amd/display: Apply w/a for hard hang
on HPD") and commit 1bd3bc74 ("drm/amd/display: Extend w/a for hard
hang on HPD to dcn20") causes a regression in s0ix where the system will
fail to resume properly on many laptops.  Pull the workarounds out to
avoid that s0ix regression in the common case.  This HPD hang happens with
an external device in special circumstances and a new W/A will need to be
developed for this in the future.

Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reported-by: NScott Bruce <smbruce@gmail.com>
Reported-by: NChris Hixon <linux-kernel-bugs@hixontech.com>
Reported-by: spasswolf@web.de
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215436
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1821
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1852
Fixes: 2a50edbf ("drm/amd/display: Apply w/a for hard hang on HPD")
Fixes: 1bd3bc74 ("drm/amd/display: Extend w/a for hard hang on HPD to dcn20")
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support for IP based discovery is in place now so this
check is no longer required.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>