Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 09 3月, 2018 1 次提交
    • K
      perf/x86/intel: Fix large period handling on Broadwell CPUs · f605cfca
      由 Kan Liang 提交于 
      Large fixed period values could be truncated on Broadwell, for example:

  perf record -e cycles -c 10000000000

Here the fixed period is 0x2540BE400, but the period which finally applied is
0x540BE400 - which is wrong.

The reason is that x86_pmu::limit_period() uses an u32 parameter, so the
high 32 bits of 'period' get truncated.

This bug was introduced in:

  commit 294fe0f5 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds")

It's safe to use u64 instead of u32:

 - Although the 'left' is s64, the value of 'left' must be positive when
   calling limit_period().

 - bdw_limit_period() only modifies the lowest 6 bits, it doesn't touch
   the higher 32 bits.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 294fe0f5 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds")
Link: http://lkml.kernel.org/r/1519926894-3520-1-git-send-email-kan.liang@linux.intel.com
[ Rewrote unacceptably bad changelog. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      f605cfca
  3. 04 3月, 2018 1 次提交
  5. 02 3月, 2018 5 次提交
  7. 01 3月, 2018 3 次提交
  9. 28 2月, 2018 4 次提交
  11. 24 2月, 2018 12 次提交
    • B
      KVM: SVM: Fix SEV LAUNCH_SECRET command · 9c5e0afa
      由 Brijesh Singh 提交于 
      The SEV LAUNCH_SECRET command fails with error code 'invalid param'
because we missed filling the guest and header system physical address
while issuing the command.

Fixes: 9f5b5b95 (KVM: SVM: Add support for SEV LAUNCH_SECRET command)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-kernel@vger.kernel.org
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      9c5e0afa
    • B
      KVM: SVM: install RSM intercept · 7607b717
      由 Brijesh Singh 提交于 
      RSM instruction is used by the SMM handler to return from SMM mode.
Currently, rsm causes a #UD - which results in instruction fetch, decode,
and emulate. By installing the RSM intercept we can avoid the instruction
fetch since we know that #VMEXIT was due to rsm.

The patch is required for the SEV guest, because in case of SEV guest
memory is encrypted with guest-specific key and hypervisor will not
able to fetch the instruction bytes from the guest memory.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      7607b717
    • B
      KVM: SVM: no need to call access_ok() in LAUNCH_MEASURE command · 3e233385
      由 Brijesh Singh 提交于 
      Using the access_ok() to validate the input before issuing the SEV
command does not buy us anything in this case. If userland is
giving us a garbage pointer then copy_to_user() will catch it when we try
to return the measurement.
Suggested-by: NAl Viro <viro@ZenIV.linux.org.uk>
Fixes: 0d0736f7 (KVM: SVM: Add support for KVM_SEV_LAUNCH_MEASURE ...)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-kernel@vger.kernel.org
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      3e233385
    • W
      KVM: X86: Avoid traversing all the cpus for pv tlb flush when steal time is disabled · 4f2f61fc
      由 Wanpeng Li 提交于 
      Avoid traversing all the cpus for pv tlb flush when steal time
is disabled since pv tlb flush depends on the field in steal time
for shared data.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      4f2f61fc
    • D
      x86/kvm: Make parse_no_xxx __init for kvm · afdc3f58
      由 Dou Liyang 提交于 
      The early_param() is only called during kernel initialization, So Linux
marks the functions of it with __init macro to save memory.

But it forgot to mark the parse_no_kvmapf/stealacc/kvmclock_vsyscall,
So, Make them __init as well.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: rkrcmar@redhat.com
Cc: kvm@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: x86@kernel.org
Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      afdc3f58
    • R
      KVM: x86: fix backward migration with async_PF · fe2a3027
      由 Radim Krčmář 提交于 
      Guests on new hypersiors might set KVM_ASYNC_PF_DELIVERY_AS_PF_VMEXIT
bit when enabling async_PF, but this bit is reserved on old hypervisors,
which results in a failure upon migration.

To avoid breaking different cases, we are checking for CPUID feature bit
before enabling the feature and nothing else.

Fixes: 52a5c155 ("KVM: async_pf: Let guest support delivery of async_pf from guest mode")
Cc: <stable@vger.kernel.org>
Reviewed-by: NWanpeng Li <wanpengli@tencent.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      fe2a3027
    • S
      kvm: fix warning for non-x86 builds · f75e4924
      由 Sebastian Ott 提交于 
      Fix the following sparse warning by moving the prototype
of kvm_arch_mmu_notifier_invalidate_range() to linux/kvm_host.h .

  CHECK   arch/s390/kvm/../../../virt/kvm/kvm_main.c
arch/s390/kvm/../../../virt/kvm/kvm_main.c:138:13: warning: symbol 'kvm_arch_mmu_notifier_invalidate_range' was not declared. Should it be static?
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      f75e4924
    • W
      KVM: X86: Fix SMRAM accessing even if VM is shutdown · 95e057e2
      由 Wanpeng Li 提交于 
      Reported by syzkaller:

   WARNING: CPU: 6 PID: 2434 at arch/x86/kvm/vmx.c:6660 handle_ept_misconfig+0x54/0x1e0 [kvm_intel]
   CPU: 6 PID: 2434 Comm: repro_test Not tainted 4.15.0+ #4
   RIP: 0010:handle_ept_misconfig+0x54/0x1e0 [kvm_intel]
   Call Trace:
    vmx_handle_exit+0xbd/0xe20 [kvm_intel]
    kvm_arch_vcpu_ioctl_run+0xdaf/0x1d50 [kvm]
    kvm_vcpu_ioctl+0x3e9/0x720 [kvm]
    do_vfs_ioctl+0xa4/0x6a0
    SyS_ioctl+0x79/0x90
    entry_SYSCALL_64_fastpath+0x25/0x9c

The testcase creates a first thread to issue KVM_SMI ioctl, and then creates
a second thread to mmap and operate on the same vCPU.  This triggers a race
condition when running the testcase with multiple threads. Sometimes one thread
exits with a triple fault while another thread mmaps and operates on the same
vCPU.  Because CS=0x3000/IP=0x8000 is not mapped, accessing the SMI handler
results in an EPT misconfig. This patch fixes it by returning RET_PF_EMULATE
in kvm_handle_bad_page(), which will go on to cause an emulation failure and an
exit with KVM_EXIT_INTERNAL_ERROR.

Reported-by: syzbot+c1d9517cab094dae65e446c0c5b4de6c40f4dc58@syzkaller.appspotmail.com
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      95e057e2
    • C
      KVM: nVMX: Don't halt vcpu when L1 is injecting events to L2 · 135a06c3
      由 Chao Gao 提交于 
      Although L2 is in halt state, it will be in the active state after
VM entry if the VM entry is vectoring according to SDM 26.6.2 Activity
State. Halting the vcpu here means the event won't be injected to L2
and this decision isn't reported to L1. Thus L0 drops an event that
should be injected to L2.

Cc: Liran Alon <liran.alon@oracle.com>
Reviewed-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NChao Gao <chao.gao@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      135a06c3
    • E
      KVM/x86: remove WARN_ON() for when vm_munmap() fails · 103c763c
      由 Eric Biggers 提交于 
      On x86, special KVM memslots such as the TSS region have anonymous
memory mappings created on behalf of userspace, and these mappings are
removed when the VM is destroyed.

It is however possible for removing these mappings via vm_munmap() to
fail.  This can most easily happen if the thread receives SIGKILL while
it's waiting to acquire ->mmap_sem.   This triggers the 'WARN_ON(r < 0)'
in __x86_set_memory_region().  syzkaller was able to hit this, using
'exit()' to send the SIGKILL.  Note that while the vm_munmap() failure
results in the mapping not being removed immediately, it is not leaked
forever but rather will be freed when the process exits.

It's not really possible to handle this failure properly, so almost
every other caller of vm_munmap() doesn't check the return value.  It's
a limitation of having the kernel manage these mappings rather than
userspace.

So just remove the WARN_ON() so that users can't spam the kernel log
with this warning.

Fixes: f0d648bd ("KVM: x86: map/unmap private slots in __x86_set_memory_region")
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
      103c763c
    • R
      KVM: nVMX: preserve SECONDARY_EXEC_DESC without UMIP · 99158246
      由 Radim Krčmář 提交于 
      L1 might want to use SECONDARY_EXEC_DESC, so we must not clear the VMCS
bit if UMIP is not being emulated.

We must still set the bit when emulating UMIP as the feature can be
passed to L2 where L0 will do the emulation and because L2 can change
CR4 without a VM exit, we should clear the bit if UMIP is disabled.

Fixes: 0367f205 ("KVM: vmx: add support for emulating UMIP")
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
      99158246
    • P
      KVM: x86: move LAPIC initialization after VMCS creation · 0b2e9904
      由 Paolo Bonzini 提交于 
      The initial reset of the local APIC is performed before the VMCS has been
created, but it tries to do a vmwrite:

 vmwrite error: reg 810 value 4a00 (err 18944)
 CPU: 54 PID: 38652 Comm: qemu-kvm Tainted: G        W I      4.16.0-0.rc2.git0.1.fc28.x86_64 #1
 Hardware name: Intel Corporation S2600CW/S2600CW, BIOS SE5C610.86B.01.01.0003.090520141303 09/05/2014
 Call Trace:
  vmx_set_rvi [kvm_intel]
  vmx_hwapic_irr_update [kvm_intel]
  kvm_lapic_reset [kvm]
  kvm_create_lapic [kvm]
  kvm_arch_vcpu_init [kvm]
  kvm_vcpu_init [kvm]
  vmx_create_vcpu [kvm_intel]
  kvm_vm_ioctl [kvm]

Move it later, after the VMCS has been created.

Fixes: 4191db26 ("KVM: x86: Update APICv on APIC reset")
Cc: stable@vger.kernel.org
Cc: Liran Alon <liran.alon@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      0b2e9904
  13. 23 2月, 2018 7 次提交
    • S
      x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations · 45967493
      由 Samuel Neves 提交于 
      Without this fix, /proc/cpuinfo will display an incorrect amount
of CPU cores, after bringing them offline and online again, as
exemplified below:

  $ cat /proc/cpuinfo | grep cores
  cpu cores	: 4
  cpu cores	: 8
  cpu cores	: 8
  cpu cores	: 20
  cpu cores	: 4
  cpu cores	: 3
  cpu cores	: 2
  cpu cores	: 2

This patch fixes this by always zeroing the booted_cores variable
upon turning off a logical CPU.
Tested-by: NDou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: NSamuel Neves <sneves@dei.uc.pt>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jgross@suse.com
Cc: luto@kernel.org
Cc: prarit@redhat.com
Cc: vkuznets@redhat.com
Link: http://lkml.kernel.org/r/20180221205036.5244-1-sneves@dei.uc.ptSigned-off-by: NIngo Molnar <mingo@kernel.org>
      45967493
    • P
      KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely() · 946fbbc1
      由 Paolo Bonzini 提交于 
      vmx_vcpu_run() and svm_vcpu_run() are large functions, and giving
branch hints to the compiler can actually make a substantial cycle
difference by keeping the fast path contiguous in memory.

With this optimization, the retpoline-guest/retpoline-host case is
about 50 cycles faster.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180222154318.20361-3-pbonzini@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      946fbbc1
    • P
      KVM/x86: Remove indirect MSR op calls from SPEC_CTRL · ecb586bd
      由 Paolo Bonzini 提交于 
      Having a paravirt indirect call in the IBRS restore path is not a
good idea, since we are trying to protect from speculative execution
of bogus indirect branch targets.  It is also slower, so use
native_wrmsrl() on the vmentry path too.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: d28b387f
Link: http://lkml.kernel.org/r/20180222154318.20361-2-pbonzini@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      ecb586bd
    • W
      x86/intel_rdt: Fix incorrect returned value when creating rdgroup... · 36e74d35
      由 Wang Hui 提交于 
      x86/intel_rdt: Fix incorrect returned value when creating rdgroup sub-directory in resctrl file system

If no monitoring feature is detected because all monitoring features are
disabled during boot time or there is no monitoring feature in hardware,
creating rdtgroup sub-directory by "mkdir" command reports error:

  mkdir: cannot create directory ‘/sys/fs/resctrl/p1’: No such file or directory

But the sub-directory actually is generated and content is correct:

  cpus  cpus_list  schemata  tasks

The error is because rdtgroup_mkdir_ctrl_mon() returns non zero value after
the sub-directory is created and the returned value is reported as an error
to user.

Clear the returned value to report to user that the sub-directory is
actually created successfully.
Signed-off-by: NWang Hui <john.wanghui@huawei.com>
Signed-off-by: NZhang Yanfei <yanfei.zhang@huawei.com>
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vikas <vikas.shivappa@intel.com>
Cc: Xiaochen Shen <xiaochen.shen@intel.com>
Link: http://lkml.kernel.org/r/1519356363-133085-1-git-send-email-fenghua.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      36e74d35
    • T
      x86/apic/vector: Handle vector release on CPU unplug correctly · e84cf6aa
      由 Thomas Gleixner 提交于 
      When a irq vector is replaced, then the previous vector is normally
released when the first interrupt happens on the new vector. If the target
CPU of the previous vector is already offline when the new vector is
installed, then the previous vector is silently discarded, which leads to
accounting issues causing suspend failures and other problems.

Adjust the logic so that the previous vector is freed in the underlying
matrix allocator to ensure that the accounting stays correct.

Fixes: 69cde000 ("x86/vector: Use matrix allocator for vector assignment")
Reported-by: NYuriy Vostrikov <delamonpansie@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NYuriy Vostrikov <delamonpansie@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180222112316.930791749@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
      e84cf6aa
    • D
      bpf, x64: implement retpoline for tail call · a493a87f
      由 Daniel Borkmann 提交于 
      Implement a retpoline [0] for the BPF tail call JIT'ing that converts
the indirect jump via jmp %rax that is used to make the long jump into
another JITed BPF image. Since this is subject to speculative execution,
we need to control the transient instruction sequence here as well
when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop.
The latter aligns also with what gcc / clang emits (e.g. [1]).

JIT dump after patch:

  # bpftool p d x i 1
   0: (18) r2 = map[id:1]
   2: (b7) r3 = 0
   3: (85) call bpf_tail_call#12
   4: (b7) r0 = 2
   5: (95) exit

With CONFIG_RETPOLINE:

  # bpftool p d j i 1
  [...]
  33:	cmp    %edx,0x24(%rsi)
  36:	jbe    0x0000000000000072  |*
  38:	mov    0x24(%rbp),%eax
  3e:	cmp    $0x20,%eax
  41:	ja     0x0000000000000072  |
  43:	add    $0x1,%eax
  46:	mov    %eax,0x24(%rbp)
  4c:	mov    0x90(%rsi,%rdx,8),%rax
  54:	test   %rax,%rax
  57:	je     0x0000000000000072  |
  59:	mov    0x28(%rax),%rax
  5d:	add    $0x25,%rax
  61:	callq  0x000000000000006d  |+
  66:	pause                      |
  68:	lfence                     |
  6b:	jmp    0x0000000000000066  |
  6d:	mov    %rax,(%rsp)         |
  71:	retq                       |
  72:	mov    $0x2,%eax
  [...]

  * relative fall-through jumps in error case
  + retpoline for indirect jump

Without CONFIG_RETPOLINE:

  # bpftool p d j i 1
  [...]
  33:	cmp    %edx,0x24(%rsi)
  36:	jbe    0x0000000000000063  |*
  38:	mov    0x24(%rbp),%eax
  3e:	cmp    $0x20,%eax
  41:	ja     0x0000000000000063  |
  43:	add    $0x1,%eax
  46:	mov    %eax,0x24(%rbp)
  4c:	mov    0x90(%rsi,%rdx,8),%rax
  54:	test   %rax,%rax
  57:	je     0x0000000000000063  |
  59:	mov    0x28(%rax),%rax
  5d:	add    $0x25,%rax
  61:	jmpq   *%rax               |-
  63:	mov    $0x2,%eax
  [...]

  * relative fall-through jumps in error case
  - plain indirect jump as before

  [0] https://support.google.com/faqs/answer/7625886
  [1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2bSigned-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
      a493a87f
    • H
      x86: Treat R_X86_64_PLT32 as R_X86_64_PC32 · b21ebf2f
      由 H.J. Lu 提交于 
      On i386, there are 2 types of PLTs, PIC and non-PIC.  PIE and shared
objects must use PIC PLT.  To use PIC PLT, you need to load
_GLOBAL_OFFSET_TABLE_ into EBX first.  There is no need for that on
x86-64 since x86-64 uses PC-relative PLT.

On x86-64, for 32-bit PC-relative branches, we can generate PLT32
relocation, instead of PC32 relocation, which can also be used as
a marker for 32-bit PC-relative branches.  Linker can always reduce
PLT32 relocation to PC32 if function is defined locally.   Local
functions should use PC32 relocation.  As far as Linux kernel is
concerned, R_X86_64_PLT32 can be treated the same as R_X86_64_PC32
since Linux kernel doesn't use PLT.

R_X86_64_PLT32 for 32-bit PC-relative branches has been enabled in
binutils master branch which will become binutils 2.31.

[ hjl is working on having better documentation on this all, but a few
  more notes from him:

   "PLT32 relocation is used as marker for PC-relative branches. Because
    of EBX, it looks odd to generate PLT32 relocation on i386 when EBX
    doesn't have GOT.

    As for symbol resolution, PLT32 and PC32 relocations are almost
    interchangeable. But when linker sees PLT32 relocation against a
    protected symbol, it can resolved locally at link-time since it is
    used on a branch instruction. Linker can't do that for PC32
    relocation"

  but for the kernel use, the two are basically the same, and this
  commit gets things building and working with the current binutils
  master   - Linus ]
Signed-off-by: NH.J. Lu <hjl.tools@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b21ebf2f
  15. 22 2月, 2018 1 次提交
    • I
      treewide/trivial: Remove ';;$' typo noise · ed7158ba
      由 Ingo Molnar 提交于 
      On lkml suggestions were made to split up such trivial typo fixes into per subsystem
patches:

  --- a/arch/x86/boot/compressed/eboot.c
  +++ b/arch/x86/boot/compressed/eboot.c
  @@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height)
          struct efi_uga_draw_protocol *uga = NULL, *first_uga;
          efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID;
          unsigned long nr_ugas;
  -       u32 *handles = (u32 *)uga_handle;;
  +       u32 *handles = (u32 *)uga_handle;
          efi_status_t status = EFI_INVALID_PARAMETER;
          int i;

This patch is the result of the following script:

  $ sed -i 's/;;$/;/g' $(git grep -E ';;$'  | grep "\.[ch]:"  | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq)

... followed by manual review to make sure it's all good.

Splitting this up is just crazy talk, let's get over with this and just do it.
Reported-by: NPavel Machek <pavel@ucw.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      ed7158ba
  17. 21 2月, 2018 6 次提交