Add forgotten entry into the global blacklist.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds support for the CSR panel built by XAT.
Signed-off-by: NIce Chien <ice.chien@accupoint.com.tw>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The following symbols are not referenced outside this file so
there's no need for it to be in the global name space.

  pcmidi_sustained_note_release
  init_sustain_timers
  stop_sustain_timers
  pcmidi_handle_report
  pcmidi_setup_extra_keys
  pcmidi_snd_initialise
  pcmidi_snd_terminate

Make them static.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

emsff_init() may fail, let's properly handle the failure.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

hid_hw_stop() must be called in ax_probe() error path if hid_hw_start()
was successful.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Microsoft comfort mouse 4500 report descriptor contains duplicate
usages for horizontal wheel. This patch fixes the wrong mapping
caused by that.
Signed-off-by: NAri Savolainen <ari.m.savolainen@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for UC-Logic Tablet WP1062 by fixing its report descriptor.

This tablet is sold as Monoprice 10X6.25 Inches Graphic Drawing Tablet.
Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add sysfs files for each led of the wiimote. Writing 1 to the file
enables the led and 0 disables the led.

We do not need memory barriers when checking wdata->ready since we use
a spinlock directly after it.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Save the current state of the leds in the wiimote data structure. This
allows us to discard new led requests that wouldn't change anything.
Protect the whole state structure by a spinlock. Every wiiproto_*
function expects this spinlock to be held when called.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add new request that sets the leds on the target device. Also, per
default, set led1 after initializing a device.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Parse input report 0x30 from the wiimote as button input. We need to
send events for all buttons on every input report because the wiimote
does not send events for single buttons but always for all buttons
to us. The input layer, however, filters redundant events.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Create array of all event handlers and call each handler when we
receive the related event.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The raw hid output function that is supported by bluetooth low-level
hid driver does not provide an output queue and also may sleep. The
wiimote driver, though, may need to send data in atomic context so
this patch adds a buffered output queue for the wiimote driver.

We use the shared workqueue to send our buffer to the hid device.
There is always only one active worker which flushes the whole output
queue to the device. If our queue is full, every further
output is discarded.

Special care is needed in the deinitialization routine. When
wiimote_hid_remove is called, HID input is already disabled, but HID
output may still be used from our worker and is then discarded by the
lower HID layers. Therefore, we can safely disable the input layer since it
is the only layer that still sends input events.
Future sysfs attributes must be freed before unregistering input to
avoid the sysfs handlers to send input events to a non-existing input
layer.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The wiimote driver needs to send raw output reports to the wiimote
device. Otherwise we could not manage the peripherals of the wiimote
or perform memory operations on the wiimote.
We cannot use hidinput_input_event of the lowlevel hid driver, since
this does not accept raw input. Therefore, we need to use the same
function that hidraw uses to send output. Side effect is, the raw
output function is not buffered and can sleep.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The wiimote first starts HID hardware and then registers the input
device. We need to synchronize the startup so no event handler will
start parsing events when the wiimote device is not ready, yet.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Register input device so the wiimote can report input events on
it. We do not use HIDINPUT because the wiimote does not provide any
descriptor table which might be used by HIDINPUT. So we avoid
having HIDINPUT parse the wiimote descriptor and create unrelated
or unknown event flags. Instead we register our own input device
that we have full control of.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Allocate wiimote device structure with all wiimote related data
when registering new wiimote devices.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The wiimote uses a fake HID protocol. Hence, we need to prevent
HIDINPUT and HIDDEV from parsing wiimote data and instead parse
raw hid events.
Add VID/PID to hid-core so the special driver is loaded on new
wiimotes.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add stub driver for the Nintendo Wii Remote. The wii remote uses
the HID protocol to communicate with the host over bluetooth. Hence,
add dependency for HIDP and place driver in hid subsystem.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add force feedback support for Holtek On Line Grip based HID devices.

The protocol is more complex than that of most other rumblepads, but the
device still needs to be handled as a memoryless one.

Tested by Cleber de Mattos Casali with a 1241:5015 "Clone Joypad Super
Power Fire" gamepad, with help from Hendrik Iben <hendrik_iben@web.de>.
Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi>
Tested-by: NCleber de Mattos Casali <clebercasali@yahoo.com.br>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

while merging hid-stantum into hid-multitouch, I did not correctly copy/paste
the VIDs for those devices.  This patch fixes it.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

In case a device does not provide the feature "Maximum Contact Count",
or set it at 0, the maxcontacts field may be at 0 while calling
input_mt_init_slots.

This patch ensures that hid-multitouch will allways report
ABS_MT_SLOT and ABS_MT_TRACKING_ID to the user space.

This corrects a bug found with some Ilitek devices that has been
integrated in 3.0-rc0.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This reverts commit 23746a66.

It turned out that the actual reason for failure is not the device
firmware, but bug in Bluetooth stack, which will be fixed by
patch by Ville Tervo which corrects the mask handling for CSR 1.1
Dongles.
Reported-and-tested-by: NEd Tomlinson <edt@aei.ca>
Reported-and-tested-by: NChase Douglas <chase.douglas@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The Digital Media 3000 keyboard (USB id: 0x0730) features the same 1-5
Application Launch keys that the Natural Ergonomic 4000 has. Add its
usb id to the list of quirks.
Reported-by: NKhelben Blackstaff <eye.of.the.8eholder@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The accelerometers/gyro on the Sixaxis are reported in the wrong
endianness (ie. not compatible with HID), so this patch intercepts
the report and swaps the appropriate bytes over.

Accelerometers are scaled with a nominal value of +/-4000 = 1G,
maximum value would be around +/-32768 = 8G.

Gyro on my device always reports -32768, might need some calibration
set within the controller.

Fix extracted from previous patch submission:
https://patchwork.kernel.org/patch/95212/Signed-off-by: NMarcin Tolysz <tolysz@gmail.com>
Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Modify the HID descriptor of the Sixaxis controller to allow the
reporting of the accelerometers and gyro via a joystick axis.

Rewrite section from offset 83:
--
0x75, 0x08,         /* Report Size (8),         */
/* all the other data lumped together */
0x95, 0x27,         /* Report Count (39),       */
0x09, 0x01,         /* Usage (Pointer),         */
0x81, 0x02,         /* Input (Variable),        */
0x75, 0x08,         /* Report Size (8),         */
0x95, 0x30,         /* Report Count (48),       */
0x09, 0x01,         /* Usage (Pointer),         */
/* Note Output */
0x91, 0x02,         /* Output (Variable),       */
0x75, 0x08,         /* Report Size (8),         */
0x95, 0x30,         /* Report Count (48),       */
0x09, 0x01,         /* Usage (Pointer),         */
/* Note Feature */
0xB1, 0x02,         /* Feature (Variable),      */
--
with
--
/* last 2 not used... */
0x95, 0x13,         /* Report Count (19),       */
0x09, 0x01,         /* Usage (Pointer),         */
0x81, 0x02,         /* Input (Variable),        */
/* Padding */
0x95, 0x0C,         /* Report Count (12),       */
0x81, 0x01,         /* Input (Constant),        */
0x75, 0x10,         /* Report Size (16),        */
0x95, 0x04,         /* Report Count (4),        */
0x26, 0xFF, 0x03,   /* Logical Maximum (1023),  */
0x46, 0xFF, 0x03,   /* Physical Maximum (1023), */
0x09, 0x01,         /* Usage (Pointer),         */
0x81, 0x02,         /* Input (Variable),        */
--
Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

On rare occassions raw events can be triggered before drvdata gets set up
which leads to NULL pointer dereferences. This was only observed with pyra on
2.6.39, but is fixed for all devices now to play it save.
kovaplus returned wrong actual values when profile change was initiated from host.
Added range checks for setting actual profile on all devices.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Removed analog feature report enums and modified code in roccat_common
to reflect this. Non standard conform Kone got its own copy of the old
code. That helps extracting more generalizations for newer devices.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

As module roccat is needed by all devices, it's the toplevel
menu entry with all devices dependent.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Added binary sysfs attribute to support new functionality the manufacturer
added to koneplus.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Since the inclusion of eGalax devices in 2.6.39, I've got some
bug reports for 480d and other devices.
The problem lies in the reports descriptors: eGalax supports both
pen and fingers, and so the reports descriptors contained both.
But hid-multitouch relies on them to detect the last item in each
field to send the multitouch events. In 480d, the last item is not
Y as it should but Pressure. That means that the fields are not
aligned and X,Y are at 0,0 (the other touch coordinates of the report).

With this patch, the detection is made only when the field ContactID
has been detected inside the collection.

There is still a problem with the detections of the range as stylus
and fingers may not have the same min/max, but it's a start.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Speedlink VAD Cezanne have a hardware bug that makes the cursor "jump" from one
place to another every now and then. The issue are relative motion events
erroneously reported by the device, each having a distance value of +256. This
256 can in fact never occur due to real motion, therefore those events can
safely be ignored.  The driver also drops useless EV_REL events with a value of
0, that the device sends every time it sends an "real" EV_REL or EV_KEY event.
Signed-off-by: NStefan Kriwanek <mail@stefankriwanek.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

- Add the quirk "NOGET" to make the wheel work at all in native mode.
- Replace the somehow broken report descriptor with a custom one to have
  separate throttle and brake axes.

As there are significant differences in the descriptor (original descriptor
"hides" the separate axes in a  24 bit FF00 usagepage, new descripter replaces
that with two individual 8 bit desktop.y and desktop.rz usages) I provided a
complete replacement descriptor instead trying to patch the original one.
Patching the descriptor seems not feasible as the new one is much larger.

Note: To actually test this you have to use the tool "ltwheelconf" to put the
DFP into it's native mode - See below for more info.

Background:
Most Logitech wheels are initially reporting themselves with a "fallback"
deviceID (USB_DEVICE_ID_LOGITECH_WHEEL - 0xc294), in order to make sure they
are working even without having the proper driver installed.

If the Logitech driver is installed it sends a special command to the wheel
which sets the wheel to "native mode", enabling enhance features like:
- Clutch pedal
- extended wheel rotation range (up to 900 degrees)
- H-gate shifter
- separate axis for throttle / brake
- all buttons

When the wheel is set to native mode it basically disconnects and reconnects
with a different deviceID (USB_DEVICE_ID_LOGITECH_DFP_WHEEL - 0xc298 in this
case).

I am working on a userspace tool [1] which does the switching from fallback to
native mode. During development I found out that the Driving Force Pro wheel
is not supported in native mode - quierk NOGET is missing and the throttle and
brake axes are reported in a combined way only.
Signed-off-by: NMichael Bauer <michael@m-bauer.org>
Signed-off-by: NSimon Wood <simon@mungewell.org>

[1] https://github.com/TripleSpeeder/LTWheelConfSigned-off-by: NJiri Kosina <jkosina@suse.cz>

Added Chunghwa hid multitouch panel support into hid-multitouch.
Signed-off-by: NAustin Zhang <zhang.austin@gmail.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Unfortunately, the device seems to have the same Vendor ID and Product ID
as YUREX leg-shakes sensors, and the commit 6bc235a2 ("USB: add driver
for Meywa-Denki & Kayac YUREX") added the ID to hid_ignore_list.

I believe that we can distinguish YUREX and the Wireless Presenter by
device type.  The patch below makes the driver ignore only YUREX
(bInterfaceProtocol==0), and recognize Wireless Presenter
(bInterfaceProtocol is keyboard or mouse) as generic HID.  (I don't have
the Wireless Presenter, so not yet ested.)

** YUREX lsusb information:
Bus 002 Device 007: ID 0c45:1010 Microdia
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass            0 (Defined at Interface level)
   bDeviceSubClass         0
   bDeviceProtocol         0
   bMaxPacketSize0         8
   idVendor           0x0c45 Microdia
   idProduct          0x1010
   bcdDevice            0.03
   iManufacturer           1 JESS
   iProduct                2 YUREX
   iSerial                 3 10000269
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           34
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0xa0
       (Bus Powered)
       Remote Wakeup
     MaxPower              100mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           1
       bInterfaceClass         3 Human Interface Device
       bInterfaceSubClass      1 Boot Interface Subclass
       bInterfaceProtocol      0 None
       iInterface              0
         HID Device Descriptor:
           bLength                 9
           bDescriptorType        33
           bcdHID               1.10
           bCountryCode            0 Not supported
           bNumDescriptors         1
           bDescriptorType        34 Report
           wDescriptorLength      31
          Report Descriptors:
            ** UNAVAILABLE **
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0008  1x 8 bytes
         bInterval              10
Device Status:     0x0002
   (Bus Powered)
   Remote Wakeup Enabled

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=26922Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@gmail.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Reported-by: NThomas B?chler <thomas@archlinux.org>
Tested-by: NThomas B?chler <thomas@archlinux.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

There are a couple use after free bugs here.
Signed-off-by: NDan Carpenter <error27@gmail.com>
[jkosina@suse.cz: removed already fixed hunk]
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add 5543:0064 UC-Logic Technology Corp. Aiptek HyperPen 10000U to quirks with
HID_QUIRK_MULTI_INPUT.

Originally the device is reporting the x,y coordinates on Z and RX. By adding
this quirk, there will be two kernel devices. The first one is muted and the
second device will report coordinates on X and Y.
Signed-off-by: NJimmy Hon <honyuenkwun@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Commit 6cb4b040 ("HID: hiddev: fix race between hiddev_disconnect
and hiddev_release") made it possible to access hiddev (for unlocking
the existance mutex) once hiddev has been kfreed.

Change the order so that this can not happen (always unlock the mutex first,
it is needed only to protect access to ->exist and ->open).
Signed-off-by: NJiri Kosina <jkosina@suse.cz>