- 08 5月, 2008 9 次提交
-
-
由 Michael Buesch 提交于
This patch distributes the Local Oscillator calibration bursts over time, so that calibration only happens when it's actually needed. Currently we periodically perform a recalibration of the whole table. The table is huge and this takes lots of time. Additionally only small bits of the table are actually needed at a given time. So instead of maintaining a huge table with all possible calibration values, we create dynamic calibration settings that a) We only calibrate when they are actually needed. b) Are cached for some time until they expire. So a recalibration might happen if we need a calibration setting that's not cached, or if the active calibration setting expires. Currently the expire timeout is set to 30 seconds. We may raise that in future. This patch reduces overall memory consumption by nuking the huge static calibration tables. This patch has been tested on several 4306, 4311 and 4318 flavours. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This handler is universal for most of the HW Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch defines ANA_PLL values in iwl-csr.h Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch makes some renaming of the ampdu_action functions inside iwlwifi, and adds checks for correct station id in Rx flows Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch fixes several issues in security: 1) the uCode doesn't know about TKIP-MMIC failure, if uCode set RX_RES_STATUS_BAD_ICV_MIC, it means ICV failure: drop the packet silently. 2) do not allocate room in the key table of the uCode is the set_key call is a replacement of an old key 3) check the keyidx of the key in the uCode before removing it upon disable_key call Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
The hw_key_idx inside the ieee80211_key_conf structure does not provide all the information drivers might need to perform hardware encryption. This is in particular true for rt2x00 who needs to know the key algorithm and whether it is a shared or pairwise key. By passing the ieee80211_key_conf pointer it assures us that drivers can make full use of all information that it should know about a particular key. Additionally this patch updates all drivers to grab the hw_key_idx from the ieee80211_key_conf structure. v2: Removed bogus u16 cast v3: Add warning about ieee80211_tx_control pointers v4: Update warning about ieee80211_tx_control pointers Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch cleans up semantic of set_pwr_src set_pwr_src is now part of apm handlers group in iwlcore Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch move iwl_find_station into iwl-sta.c file Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch does several things: 1) rename CONFIG_IWL4965_SENSITIVITY to IWL4965_RUN_TIME_CALIB which is better semantic 2) move all the run time calibration to a new file: iwl-calib.c 3) simplify the sensitivity calibration flow and make it HW dependent 4) make the chain noise calibration flow HW dependent Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 02 5月, 2008 5 次提交
-
-
由 Ivo van Doorn 提交于
There was an obvious typo in LED structure initialization which caused the radio and quality/activity leds to be incorrectly initialized which resulted in the leds not being enabled. Additionally add the rt2x00led_led_activity() handler that will enable TX/RX activity leds when the radio is being enabled. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
The timing settings for 1MBs should exclude the short preamble bit since that only applies to 2MBs, 5.5MBs and 11MBs. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bill Moss 提交于
direct_mask will be set when we are not associated and requesting a direct scan. The second debug print will be confusing as priv->essid is not set at that time and it will thus print "<hidden>" while it is known to which AP a direct scan is requested - as previous debug message also indicates. Now make all debugging consistent. Signed-off-by: NBill Moss <bmoss@clemson.edu> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Guy Cohen 提交于
All channels should be scanned, including the current channel when the client is associated. Removed also unused flag to scan only active channels. Signed-off-by: NGuy Cohen <guy.cohen@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes some TX/RX related locking issues. With this patch applied, some of the PHY transmission errors are fixed. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 01 5月, 2008 2 次提交
-
-
由 Holger Schurig 提交于
According to Coverity (kudo's to Adrian Bunk), we had one use-before-check bug in libe libertas driver. This patch fixes this issue. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes operation of dual-PHY (A/B/G) devices. Do not anounce the A-PHY to mac80211, as that's not supported, yet. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 30 4月, 2008 2 次提交
-
-
由 Alan Cox 提交于
- Use the tty baud functions - Call driver termios methods directly holding the right locking - Check for a write method Signed-off-by: NAlan Cox <alan@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
This patch moves the following select's: - RFKILL : IWLWIFI_RFKILL -> IWLCORE - RFKILL_INPUT : IWLWIFI_RFKILL -> IWLCORE - MAC80211_LEDS : IWL4965_LEDS -> IWLCORE - LEDS_CLASS : IWL4965_LEDS -> IWLCORE - MAC80211_LEDS : IWL3945_LEDS -> IWL3945 - LEDS_CLASS : IWL3945_LEDS -> IWL3945 The effects are: - with IWLCORE=m and/or IWL3945=m RFKILL/RFKILL_INPUT/MAC80211_LEDS/LEDS_CLASS are no longer wrongly forced to y - fixes a build error with IWLCORE=y, IWL4965=m might be a bug in kconfig causing it, but doing this change that is anyway the right thing fixes it Reported-by: NCarlos R. Mafra <crmafra2@gmail.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 4月, 2008 3 次提交
-
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Michael Buesch <mb@bu3sch.de> Cc: Daniel Drake <dsd@gentoo.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Denis V. Lunev 提交于
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by: NDenis V. Lunev <den@openvz.org> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Use creation by full path: "driver/foo". Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 4月, 2008 1 次提交
-
-
由 Jason Riedy 提交于
If IWL3945 ever depends on IWLCORE, the silent, user-invisible IWLWIFI option can go away. Signed-off-by: NJason Riedy <jason@acm.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 4月, 2008 9 次提交
-
-
由 Zhu Yi 提交于
On Wed, 2008-04-23 at 13:38 +0300, Tomas Winkler wrote: > This patch fixes problem in Makefile that prevented > built-in compilation of iwlcore Here is the second part. Without this, drivers/net/wireless/iwlwifi/build-in.o will not be linked into vmlinux. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roland Dreier 提交于
Commit b716bb91 ("iwlwifi: Cancel scanning upon association") moved the test of priv->vif in iwl{3945,4964}_mac_config_interface() outside of where priv->mutex is held, but still tries to do mutex_unlock() on return. This is clearly wrong and triggers a nasty lockdep warning when this codepath is triggered. Fix this by removing the mutex_unlock(). Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Roel Kluin 提交于
priv->param_workaround_interval is unsigned, modparam_workaround_interval not. the former is never < 0. Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Roel Kluin 提交于
previously in this function: u32 index = (dwrq->flags & IW_ENCODE_INDEX) - 1; index is unsigned, so if -1, the original test (below) didn't work. Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Some mainboards/CPUs don't allow DMA masks bigger than a certain limit. Some VIA crap^h^h^h^hdevices have an upper limit of 0xFFFFFFFF. So in this case a 64-bit b43 device would always fail to acquire the mask. Implement a workaround to fallback to lower DMA mask, as we can always also support a lower mask. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Nick Kossifidis 提交于
*Fix radio chip identification on AR5424/2424 during ath5k_hw_attach *Try to assign an RF2413 radio on AR2424 for testing Changes-licensed-under: ISC Signed-off-by: NNick Kossifidis <mickflemm@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds more workarounds for devices with broken BT bits. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
The HostFlags are a bitmask of 48bit. So we must use an u64 datatype to hold all bits. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds a workaround for invalid bluetooth SPROM settings on ASUS PCI cards. This will stop the microcode from poking with the BT GPIO line. This fixes data transmission on this device, as the BT GPIO line is used for something TX related on this device (probably the power amplifier or the radio). This also adds a modparam knob to help debugging this in the future, as more devices with this bug may show up. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 23 4月, 2008 3 次提交
-
-
由 Tomas Winkler 提交于
This patch fixes problem in Makefile that prevented built-in compilation of iwlcore Commit that caused this problem: eadd3c4b ("iwlwifi: make Makefile more concise") Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NYi Zhu <yi.zhu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2008 2 次提交
-
-
由 Rafael J. Wysocki 提交于
After 2.6.24 there was a plan to make the PM core acquire all device semaphores during a suspend/hibernation to protect itself from concurrent operations involving device objects. That proved to be too heavy-handed and we found a better way to achieve the goal, but before it happened, we had introduced the functions device_pm_schedule_removal() and destroy_suspended_device() to allow drivers to "safely" destroy a suspended device and we had adapted some drivers to use them. Now that these functions are no longer necessary, it seems reasonable to remove them and modify their users to use the normal device unregistration instead. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David S. Miller 提交于
Reportred by Ingo Molnar: drivers/net/wireless/iwlwifi/iwl-debugfs.c: In function 'iwl_dbgfs_stations_read': drivers/net/wireless/iwlwifi/iwl-debugfs.c:256: error: 'struct iwl4965_tid_data' has no member named 'agg' Needs CONFIG_IWL4965_HT protection. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2008 4 次提交
-
-
由 Nick Kossifidis 提交于
*Handle MIB interrupts and pass low level stats to mac80211 *Add Power On Self Test function *Update to match recent dumps *Let RF2425 attach so we can further test it *Remove unused files regdom.c and regdom.h base.c Changes-licensed-under: 3-clause-BSD rest Changes-licensed-under: ISC Signed-off-by: NNick Kossifidis <mickflemm@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Nick Kossifidis 提交于
*Add RF2425 initvals (still no rx/tx) This was on my laptop for a long time so it has to go out even if it still doesn't work, i hope i'll get my hands on an eeepc so i can work this out. base.c Changes-licensed-under: 3-clause-BSD rest Changes-licensed-under: ISC Signed-off-by: NNick Kossifidis <mickflemm@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch reverses the hw_crypto logic and makes HW crypto a default. Giving swcrypto=1 as parameter to the module disables HW crypto. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mohamed Abbas 提交于
This patch fix the error we get when unload the driver, No space for Tx. The cause of this problem is related to receiving late SW rfkill from rfkill subsystem during the driver teardown causing this error. Signed-off-by: NMohamed Abbas <mabbas@linux.intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-