- 27 8月, 2011 1 次提交
-
-
由 NeilBrown 提交于
The nfsservctl system call is now gone, so we should remove all linkage for it. Signed-off-by: NNeilBrown <neilb@suse.de> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 5月, 2011 1 次提交
-
-
由 Eric W. Biederman 提交于
Ooops I overlooked this one, and missing it causes compile errors of the powerpc syscall. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
-
- 06 5月, 2011 1 次提交
-
-
由 Anton Blanchard 提交于
This patch adds a multiple message send syscall and is the send version of the existing recvmmsg syscall. This is heavily based on the patch by Arnaldo that added recvmmsg. I wrote a microbenchmark to test the performance gains of using this new syscall: http://ozlabs.org/~anton/junkcode/sendmmsg_test.c The test was run on a ppc64 box with a 10 Gbit network card. The benchmark can send both UDP and RAW ethernet packets. 64B UDP batch pkts/sec 1 804570 2 872800 (+ 8 %) 4 916556 (+14 %) 8 939712 (+17 %) 16 952688 (+18 %) 32 956448 (+19 %) 64 964800 (+20 %) 64B raw socket batch pkts/sec 1 1201449 2 1350028 (+12 %) 4 1461416 (+22 %) 8 1513080 (+26 %) 16 1541216 (+28 %) 32 1553440 (+29 %) 64 1557888 (+30 %) We see a 20% improvement in throughput on UDP send and 30% on raw socket send. [ Add sparc syscall entries. -DaveM ] Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2011 1 次提交
-
-
由 Sage Weil 提交于
It is frequently useful to sync a single file system, instead of all mounted file systems via sync(2): - On machines with many mounts, it is not at all uncommon for some of them to hang (e.g. unresponsive NFS server). sync(2) will get stuck on those and may never get to the one you do care about (e.g., /). - Some applications write lots of data to the file system and then want to make sure it is flushed to disk. Calling fsync(2) on each file introduces unnecessary ordering constraints that result in a large amount of sub-optimal writeback/flush/commit behavior by the file system. There are currently two ways (that I know of) to sync a single super_block: - BLKFLSBUF ioctl on the block device: That also invalidates the bdev mapping, which isn't usually desirable, and doesn't work for non-block file systems. - 'mount -o remount,rw' will call sync_filesystem as an artifact of the current implemention. Relying on this little-known side effect for something like data safety sounds foolish. Both of these approaches require root privileges, which some applications do not have (nor should they need?) given that sync(2) is an unprivileged operation. This patch introduces a new system call syncfs(2) that takes an fd and syncs only the file system it references. Maybe someday we can $ sync /some/path and not get sync: ignoring all arguments The syscall is motivated by comments by Al and Christoph at the last LSF. syncfs(2) seems like an appropriate name given statfs(2). A similar ioctl was also proposed a while back, see http://marc.info/?l=linux-fsdevel&m=127970513829285&w=2Signed-off-by: NSage Weil <sage@newdream.net> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 15 3月, 2011 2 次提交
-
-
由 Aneesh Kumar K.V 提交于
[AV: duplicate of open() guts removed; file_open_root() used instead] Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Aneesh Kumar K.V 提交于
The syscall also return mount id which can be used to lookup file system specific information such as uuid in /proc/<pid>/mountinfo Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 09 2月, 2011 1 次提交
-
-
由 Lai Jiangshan 提交于
Compile time initialization is better than runtime initialization. Remove many early_initcall()s and many trace_init_flags_##name()s. Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <4D3FDFFC.6030304@cn.fujitsu.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 08 2月, 2011 1 次提交
-
-
由 Ian Munsie 提交于
FTRACE_SYSCALLS would create events for each and every system call, even if it had failed to map the system call's name with it's number. This resulted in a number of events being created that would not behave as expected. This could happen, for example, on architectures who's symbol names are unusual and will not match the system call name. It could also happen with system calls which were mapped to sys_ni_syscall. This patch changes the default system call number in the metadata to -1. If the system call name from the metadata is not successfully mapped to a system call number during boot, than the event initialisation routine will now return an error, preventing the event from being created. Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> LKML-Reference: <1296703645-18718-2-git-send-email-imunsie@au1.ibm.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 03 2月, 2011 2 次提交
-
-
由 Steven Rostedt 提交于
Currently the syscall_meta structures for the syscall tracepoints are placed in the __syscall_metadata section, and at link time, the linker makes one large array of all these syscall metadata structures. On boot up, this array is read (much like the initcall sections) and the syscall data is processed. The problem is that there is no guarantee that gcc will place complex structures nicely together in an array format. Two structures in the same file may be placed awkwardly, because gcc has no clue that they are suppose to be in an array. A hack was used previous to force the alignment to 4, to pack the structures together. But this caused alignment issues with other architectures (sparc). Instead of packing the structures into an array, the structures' addresses are now put into the __syscall_metadata section. As pointers are always the natural alignment, gcc should always pack them tightly together (otherwise initcall, extable, etc would also fail). By having the pointers to the structures in the section, we can still iterate the trace_events without causing unnecessary alignment problems with other architectures, or depending on the current behaviour of gcc that will likely change in the future just to tick us kernel developers off a little more. The __syscall_metadata section is also moved into the .init.data section as it is now only needed at boot up. Suggested-by: NDavid Miller <davem@davemloft.net> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
Currently the trace_event structures are placed in the _ftrace_events section, and at link time, the linker makes one large array of all the trace_event structures. On boot up, this array is read (much like the initcall sections) and the events are processed. The problem is that there is no guarantee that gcc will place complex structures nicely together in an array format. Two structures in the same file may be placed awkwardly, because gcc has no clue that they are suppose to be in an array. A hack was used previous to force the alignment to 4, to pack the structures together. But this caused alignment issues with other architectures (sparc). Instead of packing the structures into an array, the structures' addresses are now put into the _ftrace_event section. As pointers are always the natural alignment, gcc should always pack them tightly together (otherwise initcall, extable, etc would also fail). By having the pointers to the structures in the section, we can still iterate the trace_events without causing unnecessary alignment problems with other architectures, or depending on the current behaviour of gcc that will likely change in the future just to tick us kernel developers off a little more. The _ftrace_event section is also moved into the .init.data section as it is now only needed at boot up. Suggested-by: NDavid Miller <davem@davemloft.net> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 02 2月, 2011 1 次提交
-
-
由 Richard Cochran 提交于
A new syscall is introduced that allows tuning of a POSIX clock. The new call, clock_adjtime, takes two parameters, the clock ID and a pointer to a struct timex. Any ADJTIMEX(2) operation may be requested via this system call, but various POSIX clocks may or may not support tuning. [ tglx: Adapted to the posix-timer cleanup series. Avoid copy_to_user in the error case ] Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Acked-by: NJohn Stultz <johnstul@us.ibm.com> LKML-Reference: <20110201134419.869804645@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 18 11月, 2010 2 次提交
-
-
由 Frederic Weisbecker 提交于
It is defined right after, which makes the declaration completely useless. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com>
-
由 Frederic Weisbecker 提交于
As for the raw syscalls events, individual syscall events won't leak system wide information on task bound tracing. Allow non privileged users to use them in such workflow. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Jason Baron <jbaron@redhat.com>
-
- 28 10月, 2010 1 次提交
-
-
由 Namhyung Kim 提交于
Since userspace API of ptrace syscall defines @addr and @data as void pointers, it would be more appropriate to define them as unsigned long in kernel. Therefore related functions are changed also. 'unsigned long' is typically used in other places in kernel as an opaque data type and that using this helps cleaning up a lot of warnings from sparse. Suggested-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NNamhyung Kim <namhyung@gmail.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 8月, 2010 1 次提交
-
-
由 David Howells 提交于
Make do_execve() take a const filename pointer so that kernel_execve() compiles correctly on ARM: arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type This also requires the argv and envp arguments to be consted twice, once for the pointer array and once for the strings the array points to. This is because do_execve() passes a pointer to the filename (now const) to copy_strings_kernel(). A simpler alternative would be to cast the filename pointer in do_execve() when it's passed to copy_strings_kernel(). do_execve() may not change any of the strings it is passed as part of the argv or envp lists as they are some of them in .rodata, so marking these strings as const should be fine. Further kernel_execve() and sys_execve() need to be changed to match. This has been test built on x86_64, frv, arm and mips. Signed-off-by: NDavid Howells <dhowells@redhat.com> Tested-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 8月, 2010 1 次提交
-
-
由 David Howells 提交于
Mark arguments to certain system calls as being const where they should be but aren't. The list includes: (*) The filename arguments of various stat syscalls, execve(), various utimes syscalls and some mount syscalls. (*) The filename arguments of some syscall helpers relating to the above. (*) The buffer argument of various write syscalls. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 7月, 2010 3 次提交
-
-
由 Eric Paris 提交于
The priority argument in fanotify is useless. Kill it. Signed-off-by: NEric Paris <eparis@redhat.com>
-
由 Eric Paris 提交于
This patch simply declares the new sys_fanotify_mark syscall int fanotify_mark(int fanotify_fd, unsigned int flags, u64_mask, int dfd const char *pathname) Signed-off-by: NEric Paris <eparis@redhat.com>
-
由 Eric Paris 提交于
This patch defines a new syscall fanotify_init() of the form: int sys_fanotify_init(unsigned int flags, unsigned int event_f_flags, unsigned int priority) This syscall is used to create and fanotify group. This is very similar to the inotify_init() syscall. Signed-off-by: NEric Paris <eparis@redhat.com>
-
- 16 7月, 2010 1 次提交
-
-
由 Jiri Slaby 提交于
This patch adds the code to support the sys_prlimit64 syscall which modifies-and-returns the rlim values of a selected process atomically. The first parameter, pid, being 0 means current process. Unlike the current implementation, it is a generic interface, architecture indepentent so that we needn't handle compat stuff anymore. In the future, after glibc start to use this we can deprecate sys_setrlimit and sys_getrlimit in favor to clean up the code finally. It also adds a possibility of changing limits of other processes. We check the user's permissions to do that and if it succeeds, the new limits are propagated online. This is good for large scale applications such as SAP or databases where administrators need to change limits time by time (e.g. on crashes increase core size). And it is unacceptable to restart the service. For safety, all rlim users now either use accessors or doesn't need them due to - locking - the fact a process was just forked and nobody else knows about it yet (and nobody can't thus read/write limits) hence it is safe to modify limits now. The limitation is that we currently stay at ulong internal representation. So the rlim64_is_infinity check is used where value is compared against ULONG_MAX on 32-bit which is the maximum value there. And since internally the limits are held in struct rlimit, converters which are used before and after do_prlimit call in sys_prlimit64 are introduced. Signed-off-by: NJiri Slaby <jslaby@suse.cz>
-
- 10 7月, 2010 1 次提交
-
-
由 Steven Rostedt 提交于
For some reason if we declare a static variable and then assign it later, and the assignment contains a __attribute__((__aligned__(#))), some versions of gcc will ignore it. This caused the syscall meta data to not be compact in its section and caused a kernel oops when the section was being read. The fix for these versions of gcc seems to be to add the aligned attribute to the declaration as well. This fixes the BZ regression: https://bugzilla.kernel.org/show_bug.cgi?id=16353Reported-by: NZeev Tarantov <zeev.tarantov@gmail.com> Tested-by: NZeev Tarantov <zeev.tarantov@gmail.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <AANLkTinkKVmB0fpVeqUkMeqe3ZYeXJdI8xDuzJEOjYwh@mail.gmail.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 29 6月, 2010 1 次提交
-
-
由 Li Zefan 提交于
All syscall exit events have the same fields. The kernel size drops 2.5K: text data bss dec hex filename 7018612 2034376 7251132 16304120 f8c7f8 vmlinux.o.orig 7018612 2031888 7251132 16301632 f8be40 vmlinux.o Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4BFA3746.8070100@cn.fujitsu.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 07 6月, 2010 1 次提交
-
-
由 Chris Metcalf 提交于
It turns out there is some variance on the calling conventions for these syscalls, and <asm-generic/syscalls.h> is already the mechanism used to handle this. Switch arch/tile over to using that mechanism and tweak the calling conventions for a couple of tile syscalls to match <asm-generic/syscalls.h>. Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
- 05 6月, 2010 2 次提交
-
-
由 Oleg Nesterov 提交于
task_struct->pesonality is "unsigned int", but sys_personality() paths use "unsigned long pesonality". This means that every assignment or comparison is not right. In particular, if this argument does not fit into "unsigned int" __set_personality() changes the caller's personality and then sys_personality() returns -EINVAL. Turn this argument into "unsigned int" and avoid overflows. Obviously, this is the user-visible change, we just ignore the upper bits. But this can't break the sane application. There is another thing which can confuse the poorly written applications. User-space thinks that this syscall returns int, not long. This means that the returned value can be negative and look like the error code. But note that libc won't be confused and thus errno won't be set, and with this patch the user-space can never get -1 unless sys_personality() really fails. And, most importantly, the negative RET != -1 is only possible if that app previously called personality(RET). Pointed-out-by: NWenming Zhang <wezhang@redhat.com> Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Metcalf 提交于
Reserve 16 "architecture-specific" syscall numbers starting at 244. Allow use of the sys_sync_file_range2() API with the generic unistd.h by specifying __ARCH_WANT_SYNC_FILE_RANGE2 before including it. Allow using the generic unistd.h to create the "compat" syscall table by specifying __SYSCALL_COMPAT before including it. Use sys_fadvise64_64 for __NR3264_fadvise64 in both 32- and 64-bit mode. Request the appropriate __ARCH_WANT_COMPAT_SYS_xxx values when some deprecated syscall modes are selected. As part of this change to fix up the syscalls, also provide a couple of missing signal-related syscall prototypes in <linux/syscalls.h>. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 15 5月, 2010 5 次提交
-
-
由 Steven Rostedt 提交于
Currently, every event has its own trace_event structure. This is fine since the structure is needed anyway. But the print function structure (trace_event_functions) is now separate. Since the output of the trace event is done by the class (with the exception of events defined by DEFINE_EVENT_PRINT), it makes sense to have the class define the print functions that all events in the class can use. This makes a bigger deal with the syscall events since all syscall events use the same class. The savings here is another 30K. text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4900382 1048964 861512 6810858 67ecea vmlinux.init 4900446 1049028 861512 6810986 67ed6a vmlinux.preprint 4895024 1023812 861512 6780348 6775bc vmlinux.print To accomplish this, and to let the class know what event is being printed, the event structure is embedded in the ftrace_event_call structure. This should not be an issues since the event structure was created for each event anyway. Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: NMasami Hiramatsu <mhiramat@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
Multiple events may use the same method to print their data. Instead of having all events have a pointer to their print funtions, the trace_event structure now points to a trace_event_functions structure that will hold the way to print ouf the event. The event itself is now passed to the print function to let the print function know what kind of event it should print. This opens the door to consolidating the way several events print their output. text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4900382 1048964 861512 6810858 67ecea vmlinux.init 4900446 1049028 861512 6810986 67ed6a vmlinux.preprint This change slightly increases the size but is needed for the next change. v3: Fix the branch tracer events to handle this change. v2: Fix the new function graph tracer event calls to handle this change. Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: NMasami Hiramatsu <mhiramat@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
The raw_init function pointer in the event is used to initialize various kinds of events. The type of initialization needed is usually classed to the kind of event it is. Two events with the same class will always have the same initialization function, so it makes sense to move this to the class structure. Perhaps even making a special system structure would work since the initialization is the same for all events within a system. But since there's no system structure (yet), this will just move it to the class. text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4900375 1053380 861512 6815267 67fe23 vmlinux.fields 4900382 1048964 861512 6810858 67ecea vmlinux.init The text grew very slightly, but this is a constant growth that happened with the changing of the C files that call the init code. The bigger savings is the data which will be saved the more events share a class. Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: NMasami Hiramatsu <mhiramat@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
Move the defined fields from the event to the class structure. Since the fields of the event are defined by the class they belong to, it makes sense to have the class hold the information instead of the individual events. The events of the same class would just hold duplicate information. After this change the size of the kernel dropped another 3K: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4900252 1057412 861512 6819176 680d68 vmlinux.regs 4900375 1053380 861512 6815267 67fe23 vmlinux.fields Although the text increased, this was mainly due to the C files having to adapt to the change. This is a constant increase, where new tracepoints will not increase the Text. But the big drop is in the data size (as well as needed allocations to hold the fields). This will give even more savings as more tracepoints are created. Note, if just TRACE_EVENT()s are used and not DECLARE_EVENT_CLASS() with several DEFINE_EVENT()s, then the savings will be lost. But we are pushing developers to consolidate events with DEFINE_EVENT() so this should not be an issue. The kprobes define a unique class to every new event, but are dynamic so it should not be a issue. The syscalls however have a single class but the fields for the individual events are different. The syscalls use a metadata to define the fields. I moved the fields list from the event to the metadata and added a "get_fields()" function to the class. This function is used to find the fields. For normal events and kprobes, get_fields() just returns a pointer to the fields list_head in the class. For syscall events, it returns the fields list_head in the metadata for the event. v2: Fixed the syscall fields. The syscall metadata needs a list of fields for both enter and exit. Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: NMasami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
This patch removes the register functions of TRACE_EVENT() to enable and disable tracepoints. The registering of a event is now down directly in the trace_events.c file. The tracepoint_probe_register() is now called directly. The prototypes are no longer type checked, but this should not be an issue since the tracepoints are created automatically by the macros. If a prototype is incorrect in the TRACE_EVENT() macro, then other macros will catch it. The trace_event_class structure now holds the probes to be called by the callbacks. This removes needing to have each event have a separate pointer for the probe. To handle kprobes and syscalls, since they register probes in a different manner, a "reg" field is added to the ftrace_event_class structure. If the "reg" field is assigned, then it will be called for enabling and disabling of the probe for either ftrace or perf. To let the reg function know what is happening, a new enum (trace_reg) is created that has the type of control that is needed. With this new rework, the 82 kernel events and 618 syscall events has their footprint dramatically lowered: text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class 4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint 4900252 1057412 861512 6819176 680d68 vmlinux.regs The size went from 6863829 to 6819176, that's a total of 44K in savings. With tracepoints being continuously added, this is critical that the footprint becomes minimal. v5: Added #ifdef CONFIG_PERF_EVENTS around a reference to perf specific structure in trace_events.c. v4: Fixed trace self tests to check probe because regfunc no longer exists. v3: Updated to handle void *data in beginning of probe parameters. Also added the tracepoint: check_trace_callback_type_##call(). v2: Changed the callback probes to pass void * and typecast the value within the function. Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: NMasami Hiramatsu <mhiramat@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 14 5月, 2010 1 次提交
-
-
由 Steven Rostedt 提交于
This patch creates a ftrace_event_class struct that event structs point to. This class struct will be made to hold information to modify the events. Currently the class struct only holds the events system name. This patch slightly increases the size, but this change lays the ground work of other changes to make the footprint of tracepoints smaller. With 82 standard tracepoints, and 618 system call tracepoints (two tracepoints per syscall: enter and exit): text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4914025 1088868 861512 6864405 68be15 vmlinux.class This patch also cleans up some stale comments in ftrace.h. v2: Fixed missing semi-colon in macro. Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: NMasami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 23 3月, 2010 1 次提交
-
-
由 Linus Torvalds 提交于
Commit 45575f5a ("ppc64 sys_ipc breakage in 2.6.34-rc2") fixed the definition of the sys_ipc() helper, but didn't fix the prototype in <linux/syscalls.h> Reported-and-tested-by: NAndreas Schwab <schwab@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 3月, 2010 4 次提交
-
-
由 Christoph Hellwig 提交于
Add generic implementations of the old and really old uname system calls. Note that sh only implements sys_olduname but not sys_oldolduname, but I'm not going to bother with another ifdef for that special case. m32r implemented an old uname but never wired it up, so kill it, too. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Add a generic implementation of the ipc demultiplexer syscall. Except for s390 and sparc64 all implementations of the sys_ipc are nearly identical. There are slight differences in the types of the parameters, where mips and powerpc as the only 64-bit architectures with sys_ipc use unsigned long for the "third" argument as it gets casted to a pointer later, while it traditionally is an "int" like most other paramters. frv goes even further and uses unsigned long for all parameters execept for "ptr" which is a pointer type everywhere. The change from int to unsigned long for "third" and back to "int" for the others on frv should be fine due to the in-register calling conventions for syscalls (we already had a similar issue with the generic sys_ptrace), but I'd prefer to have the arch maintainers looks over this in details. Except for that h8300, m68k and m68knommu lack an impplementation of the semtimedop sub call which this patch adds, and various architectures have gets used - at least on i386 it seems superflous as the compat code on x86-64 and ia64 doesn't even bother to implement it. [akpm@linux-foundation.org: add sys_ipc to sys_ni.c] Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: NH. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Acked-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NDavid Howells <dhowells@redhat.com> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Add a generic implementation of the old mmap() syscall, which expects its argument in a memory block and switch all architectures over to use it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: NH. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Acked-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NGreg Ungerer <gerg@uclinux.org> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Add a generic implementation of the old select() syscall, which expects its argument in a memory block and switch all architectures over to use it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: NH. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Acked-by: NAndreas Schwab <schwab@linux-m68k.org> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NGreg Ungerer <gerg@uclinux.org> Acked-by: NDavid Howells <dhowells@redhat.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 3月, 2010 1 次提交
-
-
由 Frederic Weisbecker 提交于
Drop the obsolete "profile" naming used by perf for trace events. Perf can now do more than simple events counting, so generalize the API naming. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com>
-
- 25 2月, 2010 1 次提交
-
-
由 Jeff Mahoney 提交于
GCC 4.5 introduces behavior that forces the alignment of structures to use the largest possible value. The default value is 32 bytes, so if some structures are defined with a 4-byte alignment and others aren't declared with an alignment constraint at all - it will align at 32-bytes. For things like the ftrace events, this results in a non-standard array. When initializing the ftrace subsystem, we traverse the _ftrace_events section and call the initialization callback for each event. When the structures are misaligned, we could be treating another part of the structure (or the zeroed out space between them) as a function pointer. This patch forces the alignment for all the ftrace_event_call structures to 4 bytes. Without this patch, the kernel fails to boot very early when built with gcc 4.5. It's trivial to check the alignment of the members of the array, so it might be worthwhile to add something to the build system to do that automatically. Unfortunately, that only covers this case. I've asked one of the gcc developers about adding a warning when this condition is seen. Cc: stable@kernel.org Signed-off-by: NJeff Mahoney <jeffm@suse.com> LKML-Reference: <4B85770B.6010901@suse.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 07 1月, 2010 2 次提交
-
-
由 Lai Jiangshan 提交于
The previous patches added the use of print_fmt string and changes the trace_define_field() function to also create the fields and format output for the event format files. text data bss dec hex filename 5857201 1355780 9336808 16549789 fc879d vmlinux 5884589 1351684 9337896 16574169 fce6d9 vmlinux-orig The above shows the size of the vmlinux after this patch set compared to the vmlinux-orig which is before the patch set. This saves us 27k on text, 1k on bss and adds just 4k of data. The total savings of 24k in size. Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <4B273D4D.40604@cn.fujitsu.com> Acked-by: NMasami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
In the clean up of having all events call one specific function, the syscall event init was changed to call this helper function. With the new print_fmt updates, the syscalls need to do special initializations. This patch converts the syscall events to call its own init function again. Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-