Reading the partial HID Descriptor is causing a firmware lockup in some
sensor hubs. Instead of a partial read, this patch implements the
i2c hid fetch using a fixed descriptor size (30 bytes) followed by a
verification of the BCDVersion (V01.00), and value stored in
wHIDDescLength (30 Bytes) for V1.00 descriptors.

As per i2c hid spec, this is the preferred model.

From hid-over-i2c-protocol-spec-v1-0:

  There are a variety of ways a HOST may choose to retrieve
  the HID Descriptor from the DEVICE. The following is a preferred
  implementation but should not be considered the only implementation.
  A HOST may read the entire HID Descriptor in a single read by
  issuing a read for 30 Bytes to get the entire HID Descriptor
  from the DEVICE.However, the HOST is responsible for validating that

  1. The BCDVersion is V01.00 (later revisions may have different
     descriptor lengths), and

  2. The value stored in wHIDDescLength is 30 (Bytes) for V1.00
     descriptors.
Reported-by: NJoe Tijerina <joe.tijerina@st.com>
Signed-off-by: NArchana Patni <archana.patni@intel.com>
Signed-off-by: NSubramony Sesha <subramony.sesha@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Pull HID fixes from Jiri Kosina:

 - fix a small bug in computation of report size, which might cause some
   devices (Atmel touchpad found on the Samsung Ativ 9) to reject
   reports with otherwise valid contents

 - a few device-ID specific quirks/additions piggy-backing on top of it

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: sensor-hub: Add in quirk for sensor hub in Lenovo Ideapad Yogas
  HID: add NO_INIT_REPORTS quirk for Synaptics Touch Pad V 103S
  HID: core: fix computation of the report size
  HID: multitouch: add support of EliteGroup 05D8 panels

Pull radeon mullins support from Dave Airlie:
 "This is support for the new AMD mullins APU, it pretty much just adds
  support to the driver in the all the right places, and is pretty low
  risk wrt other GPUs"

Oh well.  I guess it ends up fitting under "support new hardware" for
merging late.

* 'drm-radeon-mullins' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: add pci ids for Mullins
  drm/radeon: add Mullins VCE support
  drm/radeon: modesetting updates for Mullins.
  drm/radeon: dpm updates for KV/KB
  drm/radeon: add Mullins dpm support.
  drm/radeon: add Mullins UVD support.
  drm/radeon: update cik init for Mullins.
  drm/radeon: add Mullins chip family

Pull drm fixes from Dave Airlie:
 "radeon, i915 and nouveau fixes, all fixes for regressions or black
  screens, or possible oopses"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: lower the ref * post PLL maximum
  drm/radeon: check that we have a clock before PLL setup
  drm/radeon: drm/radeon: add missing radeon_semaphore_free to error path
  drm/radeon: Fix num_banks calculation for SI
  agp: info leak in agpioc_info_wrap()
  drm/gm107/gr: bump attrib cb size quite a bit
  drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip
  drm/nouveau/bios: fix shadowing from PROM on big-endian systems
  drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi
  drm/radeon/dp: check for errors in dpcd reads
  drm/radeon: avoid high jitter with small frac divs
  drm/radeon: check buffer relocation offset
  drm/radeon: use pflip irq on R600+ v2
  drm/radeon/uvd: use lower clocks on old UVD to boot v2
  drm/i915: don't try DP_LINK_BW_5_4 on HSW ULX
  drm/i915: Sanitize the enable_ppgtt module option once
  drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()

Add Mullins chips support.

* 'mullins' of git://people.freedesktop.org/~deathsimple/linux:
  drm/radeon: add pci ids for Mullins
  drm/radeon: add Mullins VCE support
  drm/radeon: modesetting updates for Mullins.
  drm/radeon: dpm updates for KV/KB
  drm/radeon: add Mullins dpm support.
  drm/radeon: add Mullins UVD support.
  drm/radeon: update cik init for Mullins.
  drm/radeon: add Mullins chip family

Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes

nouveau fixes.

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/gm107/gr: bump attrib cb size quite a bit
  drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip
  drm/nouveau/bios: fix shadowing from PROM on big-endian systems
  drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi

Some more i915 fixes. There's still some DP issues we are looking into,
but wanted to get these moving.

* tag 'topc/core-stuff-2014-05-05' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: don't try DP_LINK_BW_5_4 on HSW ULX
  drm/i915: Sanitize the enable_ppgtt module option once
  drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()

this is the next pull quested for stashed up radeon fixes for 3.15. As discussed support for Mullins was separated out and will get it's own pull request. Remaining highlights are:
1. Some more patches to better handle PLL limits.
2. Making use of the PFLIP additional to the VBLANK interrupt, otherwise we sometimes miss page flip events.
3. Fix for the UVD command stream parser.
4. Fix for bootup UVD clocks on RV7xx systems.
5. Adding missing error check on dpcd reads.
6. Fixes number of banks calculation on SI.

* 'drm-fixes-3.15' of git://people.freedesktop.org/~deathsimple/linux:
  drm/radeon: lower the ref * post PLL maximum
  drm/radeon: check that we have a clock before PLL setup
  drm/radeon: drm/radeon: add missing radeon_semaphore_free to error path
  drm/radeon: Fix num_banks calculation for SI
  drm/radeon/dp: check for errors in dpcd reads
  drm/radeon: avoid high jitter with small frac divs
  drm/radeon: check buffer relocation offset
  drm/radeon: use pflip irq on R600+ v2
  drm/radeon/uvd: use lower clocks on old UVD to boot v2

Merge misc fixes from Andrew Morton:
 "13 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  agp: info leak in agpioc_info_wrap()
  fs/affs/super.c: bugfix / double free
  fanotify: fix -EOVERFLOW with large files on 64-bit
  slub: use sysfs'es release mechanism for kmem_cache
  revert "mm: vmscan: do not swap anon pages just because free+file is low"
  autofs: fix lockref lookup
  mm: filemap: update find_get_pages_tag() to deal with shadow entries
  mm/compaction: make isolate_freepages start at pageblock boundary
  MAINTAINERS: zswap/zbud: change maintainer email address
  mm/page-writeback.c: fix divide by zero in pos_ratio_polynom
  hugetlb: ensure hugepage access is denied if hugepages are not supported
  slub: fix memcg_propagate_slab_attrs
  drivers/rtc/rtc-pcf8523.c: fix month definition

On 64 bit systems the agp_info struct has a 4 byte hole between
->agp_mode and ->aper_base.  We need to clear it to avoid disclosing
stack information to userspace.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 842a859d ("affs: use ->kill_sb() to simplify ->put_super()
and failure exits of ->mount()") adds .kill_sb which frees sbi but
doesn't remove sbi free in case of parse_options error causing double
free+random crash.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>	[3.14.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On 64-bit systems, O_LARGEFILE is automatically added to flags inside
the open() syscall (also openat(), blkdev_open(), etc).  Userspace
therefore defines O_LARGEFILE to be 0 - you can use it, but it's a
no-op.  Everything should be O_LARGEFILE by default.

But: when fanotify does create_fd() it uses dentry_open(), which skips
all that.  And userspace can't set O_LARGEFILE in fanotify_init()
because it's defined to 0.  So if fanotify gets an event regarding a
large file, the read() will just fail with -EOVERFLOW.

This patch adds O_LARGEFILE to fanotify_init()'s event_f_flags on 64-bit
systems, using the same test as open()/openat()/etc.

Addresses https://bugzilla.redhat.com/show_bug.cgi?id=696821Signed-off-by: NWill Woods <wwoods@redhat.com>
Acked-by: NEric Paris <eparis@redhat.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

debugobjects warning during netfilter exit:

    ------------[ cut here ]------------
    WARNING: CPU: 6 PID: 4178 at lib/debugobjects.c:260 debug_print_object+0x8d/0xb0()
    ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x20
    Modules linked in:
    CPU: 6 PID: 4178 Comm: kworker/u16:2 Tainted: G        W 3.11.0-next-20130906-sasha #3984
    Workqueue: netns cleanup_net
    Call Trace:
      dump_stack+0x52/0x87
      warn_slowpath_common+0x8c/0xc0
      warn_slowpath_fmt+0x46/0x50
      debug_print_object+0x8d/0xb0
      __debug_check_no_obj_freed+0xa5/0x220
      debug_check_no_obj_freed+0x15/0x20
      kmem_cache_free+0x197/0x340
      kmem_cache_destroy+0x86/0xe0
      nf_conntrack_cleanup_net_list+0x131/0x170
      nf_conntrack_pernet_exit+0x5d/0x70
      ops_exit_list+0x5e/0x70
      cleanup_net+0xfb/0x1c0
      process_one_work+0x338/0x550
      worker_thread+0x215/0x350
      kthread+0xe7/0xf0
      ret_from_fork+0x7c/0xb0

Also during dcookie cleanup:

    WARNING: CPU: 12 PID: 9725 at lib/debugobjects.c:260 debug_print_object+0x8c/0xb0()
    ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x20
    Modules linked in:
    CPU: 12 PID: 9725 Comm: trinity-c141 Not tainted 3.15.0-rc2-next-20140423-sasha-00018-gc4ff6c4 #408
    Call Trace:
      dump_stack (lib/dump_stack.c:52)
      warn_slowpath_common (kernel/panic.c:430)
      warn_slowpath_fmt (kernel/panic.c:445)
      debug_print_object (lib/debugobjects.c:262)
      __debug_check_no_obj_freed (lib/debugobjects.c:697)
      debug_check_no_obj_freed (lib/debugobjects.c:726)
      kmem_cache_free (mm/slub.c:2689 mm/slub.c:2717)
      kmem_cache_destroy (mm/slab_common.c:363)
      dcookie_unregister (fs/dcookies.c:302 fs/dcookies.c:343)
      event_buffer_release (arch/x86/oprofile/../../../drivers/oprofile/event_buffer.c:153)
      __fput (fs/file_table.c:217)
      ____fput (fs/file_table.c:253)
      task_work_run (kernel/task_work.c:125 (discriminator 1))
      do_notify_resume (include/linux/tracehook.h:196 arch/x86/kernel/signal.c:751)
      int_signal (arch/x86/kernel/entry_64.S:807)

Sysfs has a release mechanism.  Use that to release the kmem_cache
structure if CONFIG_SYSFS is enabled.

Only slub is changed - slab currently only supports /proc/slabinfo and
not /sys/kernel/slab/*.  We talked about adding that and someone was
working on it.

[akpm@linux-foundation.org: fix CONFIG_SYSFS=n build]
[akpm@linux-foundation.org: fix CONFIG_SYSFS=n build even more]
Signed-off-by: NChristoph Lameter <cl@linux.com>
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Tested-by: NSasha Levin <sasha.levin@oracle.com>
Acked-by: NGreg KH <greg@kroah.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 0bf1457f ("mm: vmscan: do not swap anon pages
just because free+file is low") because it introduced a regression in
mostly-anonymous workloads, where reclaim would become ineffective and
trap every allocating task in direct reclaim.

The problem is that there is a runaway feedback loop in the scan balance
between file and anon, where the balance tips heavily towards a tiny
thrashing file LRU and anonymous pages are no longer being looked at.
The commit in question removed the safe guard that would detect such
situations and respond with forced anonymous reclaim.

This commit was part of a series to fix premature swapping in loads with
relatively little cache, and while it made a small difference, the cure
is obviously worse than the disease.  Revert it.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NRafael Aquini <aquini@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@kernel.org>		[3.12+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

autofs needs to be able to see private data dentry flags for its dentrys
that are being created but not yet hashed and for its dentrys that have
been rmdir()ed but not yet freed.  It needs to do this so it can block
processes in these states until a status has been returned to indicate
the given operation is complete.

It does this by keeping two lists, active and expring, of dentrys in
this state and uses ->d_release() to keep them stable while it checks
the reference count to determine if they should be used.

But with the recent lockref changes dentrys being freed sometimes don't
transition to a reference count of 0 before being freed so autofs can
occassionally use a dentry that is invalid which can lead to a panic.
Signed-off-by: NIan Kent <raven@themaw.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Dave Jones reports the following crash when find_get_pages_tag() runs
into an exceptional entry:

  kernel BUG at mm/filemap.c:1347!
  RIP: find_get_pages_tag+0x1cb/0x220
  Call Trace:
    find_get_pages_tag+0x36/0x220
    pagevec_lookup_tag+0x21/0x30
    filemap_fdatawait_range+0xbe/0x1e0
    filemap_fdatawait+0x27/0x30
    sync_inodes_sb+0x204/0x2a0
    sync_inodes_one_sb+0x19/0x20
    iterate_supers+0xb2/0x110
    sys_sync+0x44/0xb0
    ia32_do_call+0x13/0x13

  1343                         /*
  1344                          * This function is never used on a shmem/tmpfs
  1345                          * mapping, so a swap entry won't be found here.
  1346                          */
  1347                         BUG();

After commit 0cd6144a ("mm + fs: prepare for non-page entries in
page cache radix trees") this comment and BUG() are out of date because
exceptional entries can now appear in all mappings - as shadows of
recently evicted pages.

However, as Hugh Dickins notes,

  "it is truly surprising for a PAGECACHE_TAG_WRITEBACK (and probably
   any other PAGECACHE_TAG_*) to appear on an exceptional entry.

   I expect it comes down to an occasional race in RCU lookup of the
   radix_tree: lacking absolute synchronization, we might sometimes
   catch an exceptional entry, with the tag which really belongs with
   the unexceptional entry which was there an instant before."

And indeed, not only is the tree walk lockless, the tags are also read
in chunks, one radix tree node at a time.  There is plenty of time for
page reclaim to swoop in and replace a page that was already looked up
as tagged with a shadow entry.

Remove the BUG() and update the comment.  While reviewing all other
lookup sites for whether they properly deal with shadow entries of
evicted pages, update all the comments and fix memcg file charge moving
to not miss shmem/tmpfs swapcache pages.

Fixes: 0cd6144a ("mm + fs: prepare for non-page entries in page cache radix trees")
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NDave Jones <davej@redhat.com>
Acked-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The compaction freepage scanner implementation in isolate_freepages()
starts by taking the current cc->free_pfn value as the first pfn.  In a
for loop, it scans from this first pfn to the end of the pageblock, and
then subtracts pageblock_nr_pages from the first pfn to obtain the first
pfn for the next for loop iteration.

This means that when cc->free_pfn starts at offset X rather than being
aligned on pageblock boundary, the scanner will start at offset X in all
scanned pageblock, ignoring potentially many free pages.  Currently this
can happen when

 a) zone's end pfn is not pageblock aligned, or

 b) through zone->compact_cached_free_pfn with CONFIG_HOLES_IN_ZONE
    enabled and a hole spanning the beginning of a pageblock

This patch fixes the problem by aligning the initial pfn in
isolate_freepages() to pageblock boundary.  This also permits replacing
the end-of-pageblock alignment within the for loop with a simple
pageblock_nr_pages increment.
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reported-by: NHeesub Shin <heesub.shin@samsung.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Dongjun Shin <d.j.shin@samsung.com>
Cc: Sunghwan Yun <sunghwan.yun@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sjenning@linux.vnet.ibm.com is no longer a viable entity.
Signed-off-by: NSeth Jennings <sjennings@variantweb.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is possible for "limit - setpoint + 1" to equal zero, after getting
truncated to a 32 bit variable, and resulting in a divide by zero error.

Using the fully 64 bit divide functions avoids this problem.  It also
will cause pos_ratio_polynom() to return the correct value when
(setpoint - limit) exceeds 2^32.

Also uninline pos_ratio_polynom, at Andrew's request.
Signed-off-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, I am seeing the following when I `mount -t hugetlbfs /none
/dev/hugetlbfs`, and then simply do a `ls /dev/hugetlbfs`.  I think it's
related to the fact that hugetlbfs is properly not correctly setting
itself up in this state?:

  Unable to handle kernel paging request for data at address 0x00000031
  Faulting instruction address: 0xc000000000245710
  Oops: Kernel access of bad area, sig: 11 [#1]
  SMP NR_CPUS=2048 NUMA pSeries
  ....

In KVM guests on Power, in a guest not backed by hugepages, we see the
following:

  AnonHugePages:         0 kB
  HugePages_Total:       0
  HugePages_Free:        0
  HugePages_Rsvd:        0
  HugePages_Surp:        0
  Hugepagesize:         64 kB

HPAGE_SHIFT == 0 in this configuration, which indicates that hugepages
are not supported at boot-time, but this is only checked in
hugetlb_init().  Extract the check to a helper function, and use it in a
few relevant places.

This does make hugetlbfs not supported (not registered at all) in this
environment.  I believe this is fine, as there are no valid hugepages
and that won't change at runtime.

[akpm@linux-foundation.org: use pr_info(), per Mel]
[akpm@linux-foundation.org: fix build when HPAGE_SHIFT is undefined]
Signed-off-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After creating a cache for a memcg we should initialize its sysfs attrs
with the values from its parent.  That's what memcg_propagate_slab_attrs
is for.  Currently it's broken - we clearly muddled root-vs-memcg caches
there.  Let's fix it up.
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PCF8523 uses 1-12 to represent month according to datasheet.
link: www.nxp.com/documents/data_sheet/PCF8523.pdf.
Signed-off-by: NChris Cui <chris.wei.cui@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull vfs fixes from Al Viro:
 "dcache fixes + kvfree() (uninlined, exported by mm/util.c) + posix_acl
  bugfix from hch"

The dcache fixes are for a subtle LRU list corruption bug reported by
Miklos Szeredi, where people inside IBM saw list corruptions with the
LTP/host01 test.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  nick kvfree() from apparmor
  posix_acl: handle NULL ACL in posix_acl_equiv_mode
  dcache: don't need rcu in shrink_dentry_list()
  more graceful recovery in umount_collect()
  don't remove from shrink list in select_collect()
  dentry_kill(): don't try to remove from shrink list
  expand the call of dentry_lru_del() in dentry_kill()
  new helper: dentry_free()
  fold try_prune_one_dentry()
  fold d_kill() and d_free()
  fix races between __d_instantiate() and checks of dentry flags

too many places open-code it
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Various filesystems don't bother checking for a NULL ACL in
posix_acl_equiv_mode, and thus can dereference a NULL pointer when it
gets passed one. This usually happens from the NFS server, as the ACL tools
never pass a NULL ACL, but instead of one representing the mode bits.

Instead of adding boilerplat to all filesystems put this check into one place,
which will allow us to remove the check from other filesystems as well later
on.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NBen Greear <greearb@candelatech.com>
Reported-by: Marco Munderloh <munderl@tnt.uni-hannover.de>,
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Pull fuse fixes from Miklos Szeredi:
 "This adds ctime update in the new cached writeback mode and also
  fixes/simplifies the mtime update handling.  Support for rename flags
  (aka renameat2) is also added to the userspace API"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: add renameat2 support
  fuse: clear MS_I_VERSION
  fuse: clear FUSE_I_CTIME_DIRTY flag on setattr
  fuse: trust kernel i_ctime only
  fuse: remove .update_time
  fuse: allow ctime flushing to userspace
  fuse: fuse: add time_gran to INIT_OUT
  fuse: add .write_inode
  fuse: clean up fsync
  fuse: fuse: fallocate: use file_update_time()
  fuse: update mtime on open(O_TRUNC) in atomic_o_trunc mode
  fuse: update mtime on truncate(2)
  fuse: do not use uninitialized i_mode
  fuse: fix mtime update error in fsync
  fuse: check fallocate mode
  fuse: add __exit to fuse_ctl_cleanup

Pull sparc fixes from David Miller:
 "I've been auditing the THP support on sparc64 and found several bugs,
  hopefully most of which are fixed completely here.

  Also an RT kernel locking fix from Kirill Tkhai"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Give more detailed information in {pgd,pmd}_ERROR() and kill pte_ERROR().
  sparc64: Add basic validations to {pud,pmd}_bad().
  sparc64: Use 'ILOG2_4MB' instead of constant '22'.
  sparc64: Fix range check in kern_addr_valid().
  sparc64: Fix top-level fault handling bugs.
  sparc64: Handle 32-bit tasks properly in compute_effective_address().
  sparc64: Don't use _PAGE_PRESENT in pte_modify() mask.
  sparc64: Fix hex values in comment above pte_modify().
  sparc64: Fix bugs in get_user_pages_fast() wrt. THP.
  sparc64: Fix huge PMD invalidation.
  sparc64: Fix executable bit testing in set_pmd_at() paths.
  sparc64: Normalize NMI watchdog logging and behavior.
  sparc64: Make itc_sync_lock raw
  sparc64: Fix argument sign extension for compat_sys_futex().

Signed-off-by: NSamuel Li <samuel.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

VCE 2.0 just like the other CIK parts.
Signed-off-by: NLeo Liu <leo.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

Uses the same code as Kabini.
Signed-off-by: NSamuel Li <samuel.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

- Use vddc/sclk dep table for voltage if available
- Fix UVD DPM setup
- Patch voltage tables properly for non-UVD blocks
- Fix DPM + UVD/VCE on Mullins
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

Generic dpm support similar to Kabini. Mullins specific features
will be worked on later.
Signed-off-by: NSamuel Li <samuel.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

Has same version of UVD as other CIK parts.
Signed-off-by: NSamuel Li <samuel.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

Also add golden registers, update firmware loading functions.
Signed-off-by: NSamuel Li <samuel.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

Mullins is a new CI-based APU.
Signed-off-by: NSamuel Li <samuel.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=75241Signed-off-by: NChristian König <christian.koenig@amd.com>

Partially fixes: https://bugzilla.kernel.org/show_bug.cgi?id=75211Signed-off-by: NChristian König <christian.koenig@amd.com>

It would appear this bug has been copy/pasted many times without being noticed.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

The way the tile mode array index was calculated only makes sense for
the CIK specific macrotile mode array. For SI, we need to use one of the
tile mode array indices reserved for displayable surfaces.

This happened to result in correct display most if not all of the time
because most of the SI tiling modes use the same number of banks.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

If freelist_idx_t is a byte, SLAB_OBJ_MAX_NUM should be 255 not 256, and
likewise if freelist_idx_t is a short, then it should be 65535 not
65536.

This was leading to all kinds of random crashes on sparc64 where
PAGE_SIZE is 8192.  One problem shown was that if spinlock debugging was
enabled, we'd get deadlocks in copy_pte_range() or do_wp_page() with the
same cpu already holding a lock it shouldn't hold, or the lock belonging
to a completely unrelated process.

Fixes: a41adfaa ("slab: introduce byte sized index for the freelist of a slab")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>