When we parse "values" we perform check if there is correct number of
them. However similar check is missing in case of "texts", add it.
Signed-off-by: NAmadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201210152541.191728-2-amadeuszx.slawinski@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

Document the missing properties which are currently required for
Tegra186/Tegra194 DT files.
Signed-off-by: NSameer Pujar <spujar@nvidia.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1607006202-4078-3-git-send-email-spujar@nvidia.comSigned-off-by: NMark Brown <broonie@kernel.org>

Convert Tegra HDA doc to YAML format.
Signed-off-by: NSameer Pujar <spujar@nvidia.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1607006202-4078-2-git-send-email-spujar@nvidia.comSigned-off-by: NMark Brown <broonie@kernel.org>

Add a driver for simple mux driven by gpios. It currently only supports one
gpio, muxing one of two inputs to a single output.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201205001508.346439-2-alexandre.belloni@bootlin.comSigned-off-by: NMark Brown <broonie@kernel.org>

Add devicetree documentation for simple audio multiplexers
Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201205001508.346439-1-alexandre.belloni@bootlin.comSigned-off-by: NMark Brown <broonie@kernel.org>

Expand SOF support for Alder Lake by adding ACPI machine tables
for ADL-S systems with SoundWire codecs. Modify kernel config
to choose SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE for these
platforms.
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: NBard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201209153102.3028310-2-kai.vehmanen@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

Initial support for ADL w/ RT711
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: NBard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201209153102.3028310-1-kai.vehmanen@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

Merge series "ASoC: soc-pcm: trigger cleanup" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

Hi Mark

These are focusing to trigger function,
which can be cleanup, tidyup.

Kuninori Morimoto (2):
  ASoC: soc-pcm: remove dpcm_do_trigger()
  ASoC: soc-pcm: care trigger rollback

 include/sound/soc-component.h |  3 +-
 include/sound/soc-dai.h       |  4 +-
 include/sound/soc-link.h      |  3 +-
 include/sound/soc.h           |  1 +
 sound/soc/soc-component.c     | 45 ++++++++++++++++++----
 sound/soc/soc-dai.c           | 44 +++++++++++++++++----
 sound/soc/soc-link.c          | 30 ++++++++++++++-
 sound/soc/soc-pcm.c           | 72 ++++++++++++++++++++---------------
 8 files changed, 152 insertions(+), 50 deletions(-)

--
2.25.1

In some projects, the device ID register is not read correctly.
This patch helps to verify the issue is caused from i2c host or client.
Signed-off-by: NDerek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20201209091308.2823-1-derek.fang@realtek.comSigned-off-by: NMark Brown <broonie@kernel.org>

Cap-less mode is useful e.g. if the headphones are used as an antenna
for a FM radio, so that the signal is not altered. For everything else,
we want the cap-couple mode.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-5-paul@crapouillou.netSigned-off-by: NMark Brown <broonie@kernel.org>

There is simply no reason to do that.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-4-paul@crapouillou.netSigned-off-by: NMark Brown <broonie@kernel.org>

When using cap-coupled outputs, the RUP/RDO can take much longer than
the 100ms timeout we used to have. Increase that timeout to one second.
Signed-off-by: NChristophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-3-paul@crapouillou.netSigned-off-by: NMark Brown <broonie@kernel.org>

In case a poll for RUP times out, we might be left with some IRQ flags
that should be cleared before the next power on.
Signed-off-by: NChristophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-2-paul@crapouillou.netSigned-off-by: NMark Brown <broonie@kernel.org>

Use regmap_{set,clear}_bits instead of regmap_update_bits, when
applicable.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-1-paul@crapouillou.netSigned-off-by: NMark Brown <broonie@kernel.org>

soc_pcm_trigger() calls DAI/Component/Link trigger,
but some of them might be failed.

	static int soc_pcm_trigger(...)
	{
		...
		switch (cmd) {
		case SNDRV_PCM_TRIGGER_START:
		case SNDRV_PCM_TRIGGER_RESUME:
		case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
			ret = snd_soc_link_trigger(substream, cmd);
			if (ret < 0)
				break;

(*)			ret = snd_soc_pcm_component_trigger(substream, cmd);
			if (ret < 0)
				break;

			ret = snd_soc_pcm_dai_trigger(substream, cmd);
			break;
		case SNDRV_PCM_TRIGGER_STOP:
		case SNDRV_PCM_TRIGGER_SUSPEND:
		case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
			ret = snd_soc_pcm_dai_trigger(substream, cmd);
			if (ret < 0)
				break;

			ret = snd_soc_pcm_component_trigger(substream, cmd);
			if (ret < 0)
				break;

			ret = snd_soc_link_trigger(substream, cmd);
			break;
		}
		...
	}

For example, if soc_pcm_trigger() failed at (*) point,
we need to rollback previous succeeded trigger.

This patch adds trigger mark for DAI/Component/Link,
and do STOP if START/RESUME/PAUSE_RELEASE were failed.

Because it need to use new rollback parameter,
we need to modify DAI/Component/Link trigger functions in the same time.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6uycssd.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

dpcm_be_dai_trigger() is calling dpcm_do_trigger()
at each SNDRV_PCM_TRIGGER_xxx (1).

	int dpcm_be_dai_trigger(...)
	{
		for_each_dpcm_be(fe, stream, dpcm) {
(B)			...
			switch (cmd) {
			case SNDRV_PCM_TRIGGER_START:
				...
(1)				ret = dpcm_do_trigger(...);
				...
			case SNDRV_PCM_TRIGGER_RESUME:
				...
(1)				ret = dpcm_do_trigger(...);
				...
			case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
				...
(1)				ret = dpcm_do_trigger(...);
				...
			case SNDRV_PCM_TRIGGER_STOP:
				...
(1)				ret = dpcm_do_trigger(...);
				...
			case SNDRV_PCM_TRIGGER_SUSPEND:
				...
(1)				ret = dpcm_do_trigger(...);
				...
			case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
				...
(1)				ret = dpcm_do_trigger(...);
				...
			}
		}
	}

But it is just very verbose and duplicated function.
Because We can indicate dev_dbg() (A) at dpcm_be_dai_trigger() (B).
And dev_err() (C) is not needed because soc_pcm_trigger() itself
indicates error message when error.

	static int dpcm_do_trigger(...)
	{
		int ret;

(A)		dev_dbg(...);

		ret = soc_pcm_trigger(substream, cmd);
		if (ret < 0)
(C)			dev_err(...);

		return ret;
	}

This patch replace dpcm_do_trigger() to soc_pcm_trigger().
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blfecssk.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: NMark Brown <broonie@kernel.org>

Merge series "ASoC: Intel: cht_bsw_nau8824: 2 fixes for usage with sof-audio-acpi" from Hans de Goede <hdegoede@redhat.com>:

Hi All,

Here are 2 simple fixes which are necessary to make the
cht_bsw_nau8824 machine driver work together with the
sof-audio-acpi driver.

Note that atm the sof topology files are missing a .tplg
file for this setup. Simply copying over the standard
sof-byte-codec.tplg file does the trick, but then some
mixer setting changes are necessary to fix the right
speaker/headphones channel not working; and those mixer
settings break the right channel when used with the
sst-acpi driver.

I've been trying to fix this at the tplg level so that
we do not need to change the mixer settings, but no luck
sofar. I'll post a RFC with the topology changes which
I have and we can discuss this further there.

These 2 simple fixes are necessary to make the sof-audio-acpi
driver work regardless of the topology issue.

Regards,

Hans

cz_da7219_init() does not check the return values of clk_get(),
while da7219_clk_enable() calls clk_set_rate() to dereference
the pointers.
Add checks to fix the problems.
Also, change clk_get() to devm_clk_get() to avoid data leak after
failures.

Fixes: bb24a31e ("ASoC: AMD: Configure wclk and bclk of master codec")
Signed-off-by: NChuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20201204063610.513556-1-hslester96@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

The cx2072x codec driver defines multiple DAIs with the same stream
name "Playback" and "Capture".  Although the current code works more
or less as is as the secondary streams are never used, it still leads
the error message like:
 debugfs: File 'Playback' in directory 'dapm' already present!
 debugfs: File 'Capture' in directory 'dapm' already present!

Fix it by renaming the secondary streams to unique names.

Fixes: a497a436 ("ASoC: Add support for Conexant CX2072X CODEC")
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201208135154.9188-1-tiwai@suse.deSigned-off-by: NMark Brown <broonie@kernel.org>

The driver is initially designed for sound card using HDMI
interface on i.MX platform. There is internal HDMI IP or
external HDMI modules connect with SAI or AUD2HTX interface.
It supports both transmitter and receiver devices.
Signed-off-by: NShengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: NNicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1607251319-5821-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: NMark Brown <broonie@kernel.org>

Imx-hdmi is a new added machine driver for supporting hdmi devices
on i.MX platforms. There is HDMI IP or external HDMI modules connect
with SAI or AUD2HTX interface.
Signed-off-by: NShengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1607251319-5821-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: NMark Brown <broonie@kernel.org>

The snd-soc-sst-acpi driver does not care about the id specified for
the SSP2-Codec DAI, but it does matter for the snd-sof-acpi driver;
and when it is not 0 then the snd-sof-acpi driver does not work.

Set the SSP2-Codec DAI id to 0, fixing the snd-sof-acpi driver not
working on devices using the cht_bsw_nau8824 machine-driver.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201206122436.13553-3-hdegoede@redhat.comSigned-off-by: NMark Brown <broonie@kernel.org>

When using the snd-soc-sst-acpi driver then the compress-cpu-dai bits are
not used, the cht_bsw_nau8824 machine-driver is the only BYT/CHT driver
defining them.

When using the snd-sof-acpi driver then the presence of the
compress-cpu-dai bits breaks things because the sof topology file for
by/cht devices does not contain routing info for them.

Drop the compress-cpu-dai bits, fixing the snd-sof-acpi driver not
working on devices using the cht_bsw_nau8824 machine-driver.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201206122436.13553-2-hdegoede@redhat.comSigned-off-by: NMark Brown <broonie@kernel.org>

The "filter" debugfs file defines the log levels used by
the firmware and reported by sof-logger.

The file contains the formatted entry list, where each entry
follows the following syntax in plain text:
log_level uuid_id pipe_id comp_id;

This file may be updated by userspace applications such sof-logger,
or directly by the user during debugging process.

An unused (wildcard) pipe_id or comp_id value should be set to -1,
uuid_id is hexadecimal value, so when unused then should be set to 0.

When the file is modified, an IPC command is sent to FW with new
trace levels for selected components in filter elements list.
Signed-off-by: NKarol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: NGuennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201204165014.2697903-1-kai.vehmanen@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

A recent change removed the call to send the DAPM_STREAM_STOP
event in dpcm_fe_dai_shutdown. But this causes a regression
when a PCM prepare is not paired with a hw_free. So, add
the DAPM_STREAM_STOP event back to dpcm_fe_dai_shutdown()
to fix this.

The new sequence would be:
soc_pcm_prepare()
    -> SND_SOC_DAPM_STREAM_START

soc_pcm_hw_free()
    -> soc_pcm_hw_free()
	-> SND_SOC_DAPM_STREAM_STOP

dpcm_fe_dai_shutdown()
    -> SND_SOC_DAPM_STREAM_STOP

Note that the DAPM_STREAM_STOP will be called twice but it seems
harmless.

Fixes: a27b421f ('ASoC: pcm: call snd_soc_dapm_stream_stop() in soc_pcm_hw_clean')
Reported-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201202193343.912942-1-ranjani.sridharan@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

The previous fix left another warning in randconfig builds:

WARNING: unmet direct dependencies detected for SND_SOC_QDSP6
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y] && QCOM_APR [=y] && COMMON_CLK [=n]
  Selected by [y]:
  - SND_SOC_MSM8996 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y] && QCOM_APR [=y]

Add one more dependency for this one.

Fixes: 2bc8831b ("ASoC: qcom: fix SDM845 & QDSP6 dependencies more")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201203231443.1483763-1-arnd@kernel.orgSigned-off-by: NMark Brown <broonie@kernel.org>

When CONFIG_PM is disabled, we get a warning for unused functions:

sound/soc/fsl/fsl_aud2htx.c:261:12: error: unused function 'fsl_aud2htx_runtime_suspend' [-Werror,-Wunused-function]
static int fsl_aud2htx_runtime_suspend(struct device *dev)
sound/soc/fsl/fsl_aud2htx.c:271:12: error: unused function 'fsl_aud2htx_runtime_resume' [-Werror,-Wunused-function]
static int fsl_aud2htx_runtime_resume(struct device *dev)

Mark these as __maybe_unused to avoid the warning without adding
an #ifdef.

Fixes: 8a24c834 ("ASoC: fsl_aud2htx: Add aud2htx module driver")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NNicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20201203222900.1042578-1-arnd@kernel.orgSigned-off-by: NMark Brown <broonie@kernel.org>

This patch adds the driver data for two rt1011 speaker amplifiers on
SSP1 and rt5682 on SSP0 for TGL platform. DAI format for rt1011 is
leveraged from cml_rt1011_rt5682 which is 4-slot tdm with 100fs bclk.
Signed-off-by: NBrent Lu <brent.lu@intel.com>
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201203154010.29464-1-brent.lu@intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

Compile-testing this driver on an older platform without CONFIG_COMMON_CLK fails with

ERROR: modpost: "clk_set_min_rate" [sound/soc/atmel/snd-soc-mchp-spdifrx.ko] undefined!

Make this is a strict dependency.

Fixes: ef265c55 ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NCodrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201203223815.1353451-1-arnd@kernel.orgSigned-off-by: NMark Brown <broonie@kernel.org>

gcc points out a memory area that is copied to a device
but not initialized:

sound/soc/codecs/cros_ec_codec.c: In function 'i2s_rx_event':
arch/x86/include/asm/string_32.h:83:20: error: '*((void *)&p+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
   83 |   *((int *)to + 1) = *((int *)from + 1);

Initialize all the unused fields to zero.

Fixes: 727f1c71 ("ASoC: cros_ec_codec: refactor I2S RX")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NTzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201203225458.1477830-1-arnd@kernel.orgSigned-off-by: NMark Brown <broonie@kernel.org>

Fix cppcheck warning:

sound/soc/sof/control.c:117:82: style:inconclusive: Function
'snd_sof_volume_info' argument 2 names different: declaration
'ucontrol' definition 'uinfo'. [funcArgNamesDifferent]

Fixes: fca18e62 ("ASoC: SOF: control: override volume info callback")
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201204170313.2704499-1-kai.vehmanen@linux.intel.comSigned-off-by: NMark Brown <broonie@kernel.org>

Merge tag 'auxbus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into asoc-5.11

Auxiliary Bus support tag for 5.11-rc1

This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For some reason, the original aux bus patch had some really long lines
in a few places, probably due to it being a very long-lived patch in
development by many different people.  Fix that up so that the two files
all have the same length lines and function formatting styles.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Fred Oh <fred.oh@linux.intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/X8oiSFTpYHw1xE/o@kroah.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There's an effort to move the remove() callback in the driver core to
not return an int, as nothing can be done if this function fails.  To
make that effort easier, make the aux bus remove function void to start
with so that no users have to be changed sometime in the future.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Fred Oh <fred.oh@linux.intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/X8ohB1ks1NK7kPop@kroah.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

No need to include slab.h in include/linux/auxiliary_bus.h, as it is not
needed there.  Move it to drivers/base/auxiliary.c instead.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Fred Oh <fred.oh@linux.intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/X8og8xi3WkoYXet9@kroah.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support for the Auxiliary Bus, auxiliary_device and auxiliary_driver.
It enables drivers to create an auxiliary_device and bind an
auxiliary_driver to it.

The bus supports probe/remove shutdown and suspend/resume callbacks.
Each auxiliary_device has a unique string based id; driver binds to
an auxiliary_device based on this id through the bus.
Co-developed-by: NKiran Patil <kiran.patil@intel.com>
Co-developed-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: NFred Oh <fred.oh@linux.intel.com>
Co-developed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NKiran Patil <kiran.patil@intel.com>
Signed-off-by: NRanjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: NFred Oh <fred.oh@linux.intel.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NDave Ertman <david.m.ertman@intel.com>
Reviewed-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: NShiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: NMartin Habets <mhabets@solarflare.com>
Link: https://lore.kernel.org/r/20201113161859.1775473-2-david.m.ertman@intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/160695681289.505290.8978295443574440604.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The si476x codec is used for FM radio function on i.MX6
auto board.
Signed-off-by: NShengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1606708668-28786-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: NMark Brown <broonie@kernel.org>

The si476x codec is used for FM radio function on i.MX6
auto board, it only supports recording function.
Signed-off-by: NShengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: NNicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1606708668-28786-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: NMark Brown <broonie@kernel.org>

The .data field is only used to pass the string name to
platform_device_register_data().

Pass the string name directly to make the code simpler.
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201203013439.10617-1-festevam@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

Merge series "ASoC: mediatek: mt8192: support new machine rt1015p_rt5682" from Tzung-Bi Shih <tzungbi@google.com>:

The series supports new machines with rt1015p and rt5682.  Reuses most of
the code in mt8192-mt6359-rt1015-rt5682.c.

The first 3 patches refactor the existing mt8192-mt6359-rt1015-rt5682.c.
For easier to support newly added components later.

The 4th patch fixes a typo in DT bindings document.

The 5th patch proposes a new compatible string "mt8192_mt6359_rt1015p_rt5682"
for machines with rt1015p and rt5682.

The 6th patch reuses the existing machine driver to support machines with
rt1015p and rt5682.

Tzung-Bi Shih (6):
  ASoC: mediatek: mt8192: rename common symbols
  ASoC: mediatek: mt8192: extract rt1015_rt5682 specific DAI link
  ASoC: mediatek: mt8192: move rt1015_rt5682 specific data
  ASoC: dt-bindings: mt8192-mt6359: fix typo in the example
  ASoC: dt-bindings: mt8192-mt6359: add new compatible for using rt1015p
  ASoC: mediatek: mt8192: support rt1015p_rt5682

 .../sound/mt8192-mt6359-rt1015-rt5682.yaml    |   6 +-
 sound/soc/mediatek/Kconfig                    |   1 +
 .../mt8192/mt8192-mt6359-rt1015-rt5682.c      | 171 +++++++++++++-----
 3 files changed, 129 insertions(+), 49 deletions(-)

--
2.29.2.454.gaff20da3a2-goog