[Description]
SUBVP_START_LINE must be aligned to 2 swaths, so add
16 lines of margin so the start line can be adjusted by
up to 16 lines for alignment purposes in FW.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NTom Chung <chiahsuan.chung@amd.com>
Signed-off-by: NAlvin Lee <alvin.lee2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why&How]
Set the debug options to enable SubVP feature
Reviewed-by: NAlvin Lee <alvin.lee2@amd.com>
Acked-by: NTom Chung <chiahsuan.chung@amd.com>
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For optimizations and debug purposes we added an option to exit idle
operations on cursor updates.
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Due to CRB, no need to rely on MPC splitting to maximize use of DET
anymore.
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why&How]
Preparation to enable run time initialization of register offsets to add
dc_context to the link_enc_create callback. This is needed to get the
dc_ctx handle where register offset initialization routine is called.
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In single display ODM combine mode, two MPO videos ( three
 planes ) are not working

[How]
When we detect three planes, don't set odm combine 2to1 policy
 for the MPO planes.  Otherwise, we run out of pipes available
Add support for two MPO videos in dc_add_plane_to_context().
 Don't allow both videos to be on the same side of the
 display.
Add extra check when fetching free pipe for two MPO videos.
Reviewed-by: NAlvin Lee <Alvin.Lee2@amd.com>
Acked-by: NAlex Hung <alex.hung@amd.com>
Signed-off-by: NSamson Tam <Samson.Tam@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The final part of the DCN32 code that uses FPU is the bounding box code,
and this commit move it to dcn32_fpu.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move get_optimal_ntuple to the FPU code and call it inside
insert_entry_into_table_sorted.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move dlg params calculation to the FPU folder and make it static.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move dcn32_calculate_wm_and_dlg from dcn32 resources to the FPU code.
Additionally, this commit adds an interface to it.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It looks like many of the code related to SubVP uses FPU operation, and
we have many static functions that are part of this feature. This commit
is a little bit large, but it only moves SubVP operation from one file
to another, and I had to do it in a single change due to dependencies
between functions.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This commit moves phanton FPU stream to dcn32_fpu file.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The insert_entry_into_table_sorted function uses FPU operation and calls
other static functions support. This commit moves the insert entry
function with all the required struct and static functions to the FPU
file.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The function dcn32_predict_pipe_split uses FPU operations. This commit
moves this function to the dcn32_fpu file, and we ensure that we only
invoke it under the kernel_fpu protection.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The function dcn32_helper_populate_phantom_dlg_params uses FPU
operations. For this reason, this commit moves this function to the
dcn32_fpu file, and we ensure that we only invoke it under the
kernel_fpu protection.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit e7ef5569e71bf3fec01ea513c27c6081c0dbbc64.

Idle optimization was disabled due to SMU and firmware bugs. Enable it
back for DCN32. DCN321 has them enabled already

Fixes: 6a640b95 ("drm/amd/display: disable idle optimizations")
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-and-tested-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Unbounded request logic in resource/DML has some issues where unbounded
request is being enabled incorrectly. SW today enables unbounded request
unconditionally in hardware, on the assumption that HW can always
support it in single pipe scenarios.

This worked until now because the same assumption is made in DML. A new
DML update is needed to fix a bug, where there are single pipe scenarios
where unbounded cannot be enabled, and this change in DML needs to be
ported in, and dcn32 resource logic fixed.

[how]
First, dcn32_resource should program unbounded req in HW according to
unbounded req enablement output from DML, as opposed to DML input.

Second, port in DML update which disables unbounded req in some
scenarios to fix an issue with poor stutter performance
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NJun Lei <jun.lei@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
There are cases where the pipes populated are not all at the top
of the pipes list under context. Loop through all pipes for DET
allocation instead of just the number of populated ones, even if
some unpopulated pipes are iterated through unnecessarily.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NAlvin Lee <Alvin.Lee2@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NTaimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
VM enabled in IP configuration causes UCLK not
reaching DPM0. The expectation for VM enable should
be that KMD will indicate to DAL when VM is enabled,
then DAL will set the bit accordingly

[How]
Set gpuvm_enable to zero in DCN3_20 and DCN3_21 resource.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NVladimir Stempen <vladimir.stempen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
For certain MPO configurations, DML will split a pipe after DET buffer has
already been allocated by driver, resulting in allocation of more DET
segments than the configurable return buffer has, causing underflow.

[How]
Determine during DET override calculation whether or not a pipe will be
split later on by DML, and distribute DET segments based on expected
number of pipes.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NTaimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Description]
In general cases we want to keep the dram clock change requirement (we
prefer configs that support MCLK switch). Only override to false for
SubVP.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why&How]
Output Data Mapping is a power saving feature that allows us to run at
reduced DPP and DISP clocks compared to what could be achieved with a
single pipe.

Set the default policy for single display use case to use 2 to 1 ODM combine.
The options are queried by DC and appropriate register programming sequence
is initiated to enable this feature.

Fixes: 235c6763 ("drm/amd/display: add DCN32/321 specific files for Display Core")
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

hdmi_frl_pcon_support has been the source of confusion. So, rename it to
dp_hdmi21_pcon_support.
Signed-off-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Generic PCON SST support already exists and works for newer ASICs. So,
enable it by default.
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Some parts are consuming dangerously close to maximum number of states
supported when updating the BB (i.e. 8).

[how]
Change maximum stages from 9 to 20.
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NJun Lei <jun.lei@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

After some experimental tests, we noticed that we need to set
gpuvm_max_page_table_levels to '4' to meet the hardware requirements.
Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For MPO we want to allocate less than maximum DET for MPO pipes because
we need enogh buffer to move DET back to other pipes when removing an
MPO plane. Also update regular DET allocation to use DET override (DCN32
has an internal policy which driver does not want to use)
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Most of the time, a single display uses the ODM combine. When using
multi-display, we use ODM combine only if it is necessary. These cases
are not flexible enough for us, and we can improve them to take
advantage of our hardware. We want to have more control over the ODM
policy.

[How]
This commit add a new debug flag named
enable_single_display_2to1_odm_policy to control the ODM policy and
another flag named enable_dp_dig_pixel_rate_div_policy to fine control
the ODM combine. This is possible by adding a new "pipe.dest" parameter
that can be set to ODM 2:1 combined if we use a single display. For
dynamic ODM combine, when using DP-DIG, DCN applies K2=2 settings for
ODM combine. Note that this feature affects the following registers:

- timing.pix_clk_100khz -> DP_VID_M, DP_VID_N
- requested_pix_clk_100hz -> DP_DTOn_PHASE
- OTGn_PIXEL_RATE_DIVK2
- DP_PIXEL_PER_CYCLE_PROCESSING_MODE
- DIG_FIFO_OUTPUT_PIXEL_MODE
- DP_VID_N_MUL
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NSamson Tam <Samson.Tam@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]:
Lut pipeline will be hooked up differently in some asics
need to add new interfaces and missing registers.

[HOW]:
Add missing registers and hook up programming from DPP for pre-blend
lut.
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NMartin Leung <Martin.Leung@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This commit enables the SubVP feature. To achieve that, we need to:

- Don't force p-state disallow on SubVP (can't block dummy p-state)
- Send calculated watermark to DMCUB for SubVP
- Adjust CAB mode message to PMFW
- Add a proper locking sequence for SubVP
- Various fixes to SubVP static analysis and determining SubVP config
- Currently SubVP not supported with pipe split so merge all pipes
  before setting up SubVp
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NAlan Liu <HaoPing.Liu@amd.com>
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY & HOW]
Implements DTB ref clock switching with reg key default to OFF.
Refactors dccg DTBCLK logic to not store redundant state information
dccg. Also removes duplicated functions that should be inherited from
other dcn versions.
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Description]
By default we can now set
ODM_MEM_VBLANK_PWR_MODE=1
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set appropriate caps for DCN3.2.x.
Signed-off-by: NDillon Varone <dillon.varone@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY?]
If higher states have memory speed set to 0 MT/s currently they do not get set
to the highest value which can cause validation failures.

[HOW?]
Set unpopulated higher states to max value.
Signed-off-by: NDillon Varone <dillon.varone@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Use correct clock source initialization routine for DCN32/321
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Disable idle optimizations until SMU can handle them to prevent DMUB
timeout and subsequent system freeze
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: NJerry Zuo <jerry.zuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes to enable higher rate timings for DCN3.2.x.
Signed-off-by: NDillon Varone <dillon.varone@amd.com>
Signed-off-by: NChaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: NNevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: NJerry Zuo <jerry.zuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Description]
Need to add inst 5 for clk_src_regs because
there are 5 PHY instances in DCN32 & DCN321.
Signed-off-by: NAlvin Lee <alvin.lee2@amd.com>
Acked-by: NJerry Zuo <jerry.zuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why&How]
This patch adds necessary changes needed in DC files outside DCN32/321
specific tree

v2: squash in updates (Alex)
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add core DC support for DCN 3.2.x.

v2: squash in fixup (Alex)
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>