Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 23 9月, 2014 3 次提交
  3. 20 9月, 2014 3 次提交
  5. 19 9月, 2014 9 次提交
  7. 18 9月, 2014 1 次提交
  9. 17 9月, 2014 1 次提交
  11. 15 9月, 2014 1 次提交
  13. 12 9月, 2014 2 次提交
  15. 11 9月, 2014 3 次提交
  17. 10 9月, 2014 1 次提交
  19. 09 9月, 2014 4 次提交
  21. 08 9月, 2014 5 次提交
    • V
      drm/i915: Wait for vblank before enabling the TV encoder · 7a98948f
      由 Ville Syrjälä 提交于 
      The vblank waits in intel_tv_detect_type() are timing out for some
reason. This is a regression caused removing seemingly useless vblank
waits from the modeset seqeuence in:

 commit 56ef52ca
 Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
 Date:   Thu May 8 19:23:15 2014 +0300

    drm/i915: Kill vblank waits after pipe enable on gmch platforms

So it turns out they weren't all entirely useless. Apparently the pipe
has to go through one full frame before we enable the TV port. Add a
vblank wait to intel_enable_tv() to make sure that happens.

Another approach was attempted by placing the vblank wait just after
enabling the port. The theory behind that attempt was that we need to
let the port stay enabled for one full frame before disabling it again
during load detection. But that didn't work, and we definitely must
have the vblank wait before enabling the port.

Cc: stable@vger.kernel.org
Cc: Alan Bartlett <ajb@elrepo.org>
Tested-by: NAlan Bartlett <ajb@elrepo.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79311Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
      7a98948f
    • C
      drm/i915: Evict CS TLBs between batches · c4d69da1
      由 Chris Wilson 提交于 
      Running igt, I was encountering the invalid TLB bug on my 845g, despite
that it was using the CS workaround. Examining the w/a buffer in the
error state, showed that the copy from the user batch into the
workaround itself was suffering from the invalid TLB bug (the first
cacheline was broken with the first two words reversed). Time to try a
fresh approach. This extends the workaround to write into each page of
our scratch buffer in order to overflow the TLB and evict the invalid
entries. This could be refined to only do so after we update the GTT,
but for simplicity, we do it before each batch.

I suspect this supersedes our current workaround, but for safety keep
doing both.

v2: The magic number shall be 2.

This doesn't conclusively prove that it is the mythical TLB bug we've
been trying to workaround for so long, that it requires touching a number
of pages to prevent the corruption indicates to me that it is TLB
related, but the corruption (the reversed cacheline) is more subtle than
a TLB bug, where we would expect it to read the wrong page entirely.

Oh well, it prevents a reliable hang for me and so probably for others
as well.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
      c4d69da1
    • D
      drm/i915: Fix irq enable tracking in driver load · 4868b45d
      由 Daniel Vetter 提交于 
      A bunch of warnings fire on some ->irq_postinstall hooks since those
can enable interrupts (e.g. rps interrupts). And then our ordering
self-checks fire and complain.

To fix that set the tracking boolen before enabling the irqs with
drm_irq_install. Quoting the discussion with Jesse why that's safe:

On Tue, Aug 26, 2014 at 11:18 PM, Jesse Barnes <jbarnes@virtuousgeek.org> wrote:
> Yes, it might work, but if you look through the history, we set this
> field carefully; first to true in the irq_init code, then to false only
> after the irq_install completes.  So I think your fragility arguments
> apply to this change too.

Well we've done it in 4 commits or so, but currently we have:

- Set irqs_disabled to true early in driver load to make sure checks
that. That's done in irq_init, which is totally not the function that
enables interrupts, only the function that initializes all the vtables
and similar things. We actually have a fairly sane naming scheme
nowadays (not fully consistent ofc): _init is sw setup,
_enable/_hw_init is the actual hw setup. That is done in
95f25bed

- Set irqs_disabled to false right after the irqs are actually
enabled. This is done in ed2e6df1

So my change should only move the flag change over the ->preinstall
and ->postinstall hooks. I've done a little audit and didn't spot
anything amiss. Furthermore the runtime pm setup already clears
irqs_disabled _before_ calling these two hooks.

This regression has been introduced in

commit ed2e6df1
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Fri Jun 20 09:39:36 2014 -0700

    drm/i915: clear pm._irqs_disabled field after installing IRQs

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk> # gm45, ilk
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
      4868b45d
    • D
      drm/i915: Fix EIO/wedged handling in gem fault handler · 2232f031
      由 Daniel Vetter 提交于 
      In

commit 1f83fee0
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Nov 15 17:17:22 2012 +0100

    drm/i915: clear up wedged transitions

I've accidentally inverted the EIO/wedged handling in the fault
handler: We want to return the EIO as a SIGBUS only if it's not
because of the gpu having died, to prevent userspace from unduly
dying.

In my defence the comment right above is completely misleading, so fix
both.

v2: Drop the WARN_ON, it's not actually a bug to e.g. receive an -EIO
when swap-in fails.

v3: Don't remove too much ... oops.
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
      2232f031
    • C
      drm/i915: Prevent recursive deadlock on releasing a busy userptr · ad46cb53
      由 Chris Wilson 提交于 
      During release of the GEM object we hold the struct_mutex. As the
object may be holding onto the last reference for the task->mm,
calling mmput() may trigger exit_mmap() which close the vma
which will call drm_gem_vm_close() and attempt to reacquire
the struct_mutex. In order to avoid that recursion, we have
to defer the mmput() until after we drop the struct_mutex,
i.e. we need to schedule a worker to do the clean up. A further issue
spotted by Tvrtko was caused when we took a GTT mmapping of a userptr
buffer object. In that case, we would never call mmput as the object
would be cyclically referenced by the GTT mmapping and not freed upon
process exit - keeping the entire process mm alive after the process
task was reaped. The fix employed is to replace the mm_users/mmput()
reference handling to mm_count/mmdrop() for the shared i915_mm_struct.

   INFO: task test_surfaces:1632 blocked for more than 120 seconds.
         Tainted: GF          O 3.14.5+ #1
   "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
   test_surfaces   D 0000000000000000     0  1632   1590 0x00000082
    ffff88014914baa8 0000000000000046 0000000000000000 ffff88014914a010
    0000000000012c40 0000000000012c40 ffff8800a0058210 ffff88014784b010
    ffff88014914a010 ffff880037b1c820 ffff8800a0058210 ffff880037b1c824
   Call Trace:
    [<ffffffff81582499>] schedule+0x29/0x70
    [<ffffffff815825fe>] schedule_preempt_disabled+0xe/0x10
    [<ffffffff81583b93>] __mutex_lock_slowpath+0x183/0x220
    [<ffffffff81583c53>] mutex_lock+0x23/0x40
    [<ffffffffa005c2a3>] drm_gem_vm_close+0x33/0x70 [drm]
    [<ffffffff8115a483>] remove_vma+0x33/0x70
    [<ffffffff8115a5dc>] exit_mmap+0x11c/0x170
    [<ffffffff8104d6eb>] mmput+0x6b/0x100
    [<ffffffffa00f44b9>] i915_gem_userptr_release+0x89/0xc0 [i915]
    [<ffffffffa00e6706>] i915_gem_free_object+0x126/0x250 [i915]
    [<ffffffffa005c06a>] drm_gem_object_free+0x2a/0x40 [drm]
    [<ffffffffa005cc32>] drm_gem_object_handle_unreference_unlocked+0xe2/0x120 [drm]
    [<ffffffffa005ccd4>] drm_gem_object_release_handle+0x64/0x90 [drm]
    [<ffffffff8127ffeb>] idr_for_each+0xab/0x100
    [<ffffffffa005cc70>] ?  drm_gem_object_handle_unreference_unlocked+0x120/0x120 [drm]
    [<ffffffff81583c46>] ? mutex_lock+0x16/0x40
    [<ffffffffa005c354>] drm_gem_release+0x24/0x40 [drm]
    [<ffffffffa005b82b>] drm_release+0x3fb/0x480 [drm]
    [<ffffffff8118d482>] __fput+0xb2/0x260
    [<ffffffff8118d6de>] ____fput+0xe/0x10
    [<ffffffff8106f27f>] task_work_run+0x8f/0xf0
    [<ffffffff81052228>] do_exit+0x1a8/0x480
    [<ffffffff81052551>] do_group_exit+0x51/0xc0
    [<ffffffff810525d7>] SyS_exit_group+0x17/0x20
    [<ffffffff8158e092>] system_call_fastpath+0x16/0x1b

v2: Incorporate feedback from Tvrtko and remove the unnessary mm
referencing when creating the i915_mm_struct and improve some of the
function names and comments.
Reported-by: NJacek Danecki <jacek.danecki@intel.com>
Test-case: igt/gem_userptr_blits/process-exit*
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: N"Gong, Zhipeng" <zhipeng.gong@intel.com>
Cc: Jacek Danecki <jacek.danecki@intel.com>
Cc: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com>
Reviewed-by: N"Ursulin, Tvrtko" <tvrtko.ursulin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org # hold off until 3.17 ships for additional testing
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
      ad46cb53
  23. 05 9月, 2014 1 次提交
  25. 02 9月, 2014 1 次提交
  27. 01 9月, 2014 3 次提交
  29. 28 8月, 2014 2 次提交
    • M
      drm/i915: Remove bogus __init annotation from DMI callbacks · bbe1c274
      由 Mathias Krause 提交于 
      The __init annotations for the DMI callback functions are wrong as this
code can be called even after the module has been initialized, e.g. like
this:

  # echo 1 > /sys/bus/pci/devices/0000:00:02.0/remove
  # modprobe i915
  # echo 1 > /sys/bus/pci/rescan

The first command will remove the PCI device from the kernel's device
list so the second command won't see it right away. But as it registers
a PCI driver it'll see it on the third command. If the system happens to
match one of the DMI table entries we'll try to call a function in long
released memory and generate an Oops, at best.

Fix this by removing the bogus annotation.

Modpost should have caught that one but it ignores section reference
mismatches from the .rodata section. :/

Fixes: 25e341cf ("drm/i915: quirk away broken OpRegion VBT")
Fixes: 8ca4013d ("CHROMIUM: i915: Add DMI override to skip CRT...")
Fixes: 425d244c ("drm/i915: ignore LVDS on intel graphics systems...")
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Duncan Laurie <dlaurie@chromium.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>	# Can modpost be fixed?
Cc: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
      bbe1c274
    • Y
      drm/ast: Add missing entry to dclk_table[] · b8d758d2
      由 Y.C. Chen 提交于 
      This avoid reading past the end of the list for certain modes
Signed-off-by: NY.C. Chen <yc_chen@aspeedtech.com>
Reviewed-by: NEgbert Eich <eich@freedesktop.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>
      b8d758d2