If the chip is no longer usable, LEDs should be turned off so system
can be found easily in the cluster.

Also some minor reorganizing so both chips print hardware error
message at same point and only if there were unrecovered errors
Signed-off-by: NDave Olson <dave.olson@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Re-init of the kernel structures after a chip reset was leaving the
portdata structure for port zero in an inconsistent state, and a
pointer to it either stale (in re-init code) or NULL (in devdata)
Fixing the order of operations on this struct, and the condition for
interrupt access, prevents the crashes.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Mostly cleanup.
Signed-off-by: NDave Olson <dave.olson@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Due to a chip bug, the PIOAvail register is not always updated to
memory.  This patch allows userspace to force an update.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

In initialization, if we bailed at chip specific initialization, we
forgot to clean up the irq we had requested.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This patch fixes a bug where multicast packets without a GRH were not
being dropped as per the IB spec.
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

If the module parameter "kpiobufs" is set too high, the calculation to
reset it to a sane value was incorrect.
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NDave Olson <dave.olson@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Fix RDMA read response length checking for RDMA_READ_RESPONSE_ONLY to
allow a zero length response.  RDMA read responses which don't match
the expected length or occur in response to some other operation
should generate a completion queue error (see table 56, ch. 9.9.2.3 in
the IB spec).
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Improve port-sharing performance by allowing any process to receive
packets from the shared hardware port under a spin lock for mutual
exclusion. Previously, one process was nominated as the master and
that process was responsible for receiving all packets from the shared
hardware port and either consuming them or forwarding them to their
destination. This led to starvation problems for other processes when
the master process was busy in computation phases.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The port sharing feature mixed kernel virtual addresses as well as
physical addresses for the offset used to describe the mmap address to
map the InfiniPath hardware into user space.  This had a conflict on
powerpc.  The new scheme converts it to a physical address so it
doesn't conflict with chip addresses and yet still fits in 40/44 bits
so it isn't truncated by 32-bit applications calling mmap64().
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

If a receive work request has been removed from the queue but has not
had a CQ entry generated for it and the QP is modified to the error
state, the completion entry generated is incorrect.  This patch fixes
the problem.
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Code was converted from a &= ~mask to clear_bit, but the bit was left
shifted instead of being used directly, so we were either trashing
memory several pages away, or sometimes taking a kernel page fault on
an invalid page.
Signed-off-by: NDave Olson <dave.olson@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Some types of packet errors are moderately common with longer IB
cables and large clusters, and are not reported with prints by other
IB HCA drivers.  This suppresses those messages unless the new
__IPATH_ERRPKTDBG bit is set in ipath_debug.  Reporting of temporarily
disabled frequent error interrupts was also made clearer

We also distinguish between chip errors, and bad packets sent or
received in the wording of the messages.
Signed-off-by: NDave Olson <dave.olson@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This patch fixes a number of bugs with updating the PSN for retries of
RC requests.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

When switching to the QP error state, the completion queue entries
(error or flush) were not being generated correctly.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

ipath_dbg doesn't need the same prefixes that printk does.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This patch adds support for multiple RDMA reads and atomics to be sent
before an ACK is required to be seen by the requester.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

If a post send is done in loopback and there is no receive queue
entry, the sending QP is put on a timeout list for a while so the
receiver has a chance to post a receive buffer. If the another post
send is done, the code incorrectly tried to put the QP on the timeout
list again an corrupted the timeout list. This eventually leads to a
spin lock deadlock NMI due to the timer function looping forever with
the lock held.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

A silly programming error causes a CQ entry to not be generated if a
SRQ limit event is generated.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

A recent change was made to allocate memory for a port after CPU
affinity is set. That change didn't account for subports and was
trying to allocate memory for the port twice.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The chip documentation on the expected TID vs eager TID parity error
bits was reversed from what was implemented in the RTL, for both
chips.  This corrects the definitions.
Signed-off-by: NDave Olson <dave.olson@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The loop which initializes the user memory region from an array of
pages was using the wrong limit for the array.  This worked OK when
dma_map_sg() returned the same number as the number of pages.  This
patch fixes the problem.
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This is a sticky state.  It is useful for diagnosing problems with
boards versus cable/switch problems.
Signed-off-by: NDave Olson <dave.olson@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

There's no point in printing the opcode field in the completion
handling debugging output, since the type of completion is already
printed at the beginning of the line.  In fact the opcode field is not
even defined for completions with a status other than success.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The current ib_umad code never accesses bits past IB_UMAD_MAX_PORTS in
dev_map[].  We shouldn't declare it to be twice as big.
Pointed-out-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NHal Rosenstock <halr@voltaire.com>

Since commit b1c1b6a3 ("IB/ipath: merge ipath_core and ib_ipath
drivers"), CONFIG_IPATH_CORE no longer exists, so there's no reason to
have a line for it in drivers/Makefile.

Pointed out by Robert P. J. Day <rpjday@mindspring.com>.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

* Last write during i2c_xfer is of the wrong byte (off-by-1).
* Read length is wrong for some of the reads (mistakenly used the PEC
  version)
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Looks like a local change I made to be able to test-compile the i2c-pasemi
driver leaked upstream.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Users have been complaining about the w83627ehf driver flooding their logs
with debug messages like:

w83627ehf 9191-0a10: Increasing fan 4 clock divider from 64 to 128

or:

w83627ehf 9191-0290: Increasing fan 4 clock divider from 4 to 8

The reason is that we failed to actually write the LSB of the encoded clock
divider value for that fan, causing the next read to report the same old value
again and again.

Additionally, the fan number was improperly reported, making the bug harder to
find.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It got its lock and unlock backwards.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=8334

(obviously, this code could be using plain old spin_lock_irq(), too)

Cc: <matthias.kaehlcke@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It turns out that the last patch to change set_cs to be kept in the
controller's structure instead of the platform data was an incomplete
change, and did not change the references to platfrom data in the setup
xfer code.  (This can prevent an oops.)

Reported-by: <Ling.Alex@iac.com.tw>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While digging through my MAP_FIXED changes, I found that rather obvious
bug in /dev/mem mmap implementation for nommu archs. get_unmapped_area()
is expected to return an address, not a pfn.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-By: NDavid Howells <dhowells@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In mthca_arbel_fmr_unmap(), the high bits of the key are masked off.
This gets rid of the effect of adjust_key(), which makes sure that
bits 3 and 23 of the key are equal when the Sinai throughput
optimization is enabled, and so it may happen that an FMR will end up
with bits 3 and 23 in the key being different.  This causes data
corruption, because when enabling the throughput optimization, the
driver promises the HCA firmware that bits 3 and 23 of all memory keys
will always be equal.

Fix by re-applying adjust_key() after masking the key.

Thanks to Or Gerlitz for reproducing the problem, and Ariel Shahar for
help in debug.
Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

We only map DMA when cmd->request_bufflen is non-zero for non-sg
buffers, we thus should make the same check when unmapping.

Based upon a report from Pasi Pirhonen.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

3w-xxxx emulates a REQUEST_SENSE response by simply returning nothing.
Unfortunately, it's assuming that the REQUEST_SENSE command is
implemented with use_sg == 0, which is no longer the case.  The oops
occurs because it's clearing the scatterlist in request_buffer instead
of the memory region.

This is fixed by using tw_transfer_internal() to transfer correctly to
the scatterlist.
Acked-by: Nadam radford <aradford@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

DVB USB remotes do not support changing keycode maps but set
input_dev->keycodesize and input_dev->keycodemax without setting
input_dev->keycode. This causes kernel oops when user tries to
look up (or change) current keymap.

While the proper fix would be to make remotes handle keymap changes
we'll just remove keycodemax and keycodesize initialization so
EVIOCGKEYCODE and EVIOCSKEYCODE will simply return -EINVAL.

http://bugzilla.kernel.org/show_bug.cgi?id=8312

Signed-off-by: olaf.kirch@oracle.com
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If 'num_pages' were ever 1 more than a multiple of 8 (32bit platforms)
or of 16 (64 bit platforms).  filemap_attr would be allocated one
'unsigned long' shorter than required.  We need a round-up in there.
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We must unregister from SCSI before we unmap device resources and unhook
the IRQ handler.  Otherwise, SCSI may send us more requests, and we won't
be able to handle them.

I see the following oops during every reboot of my HP DL360:

    ...
    Unmounting local filesystems...done.
    Rebooting... Completed flushing cache on controller 0
    BUG: unable to handle kernel paging request at virtual address f8808040
     printing eip:
    c02dc72b
    *pde = 02120067
    *pte = 00000000
    Oops: 0002 [#1]
    SMP
    Modules linked in:
    CPU:    1
    EIP:    0060:[<c02dc72b>]    Not tainted VLI
    EFLAGS: 00010046   (2.6.21-rc6 #1)
    EIP is at SA5_submit_command+0xb/0x20
    eax: f8808000   ebx: f7a00000   ecx: f79f0000   edx: 37a00000
    esi: f79f0000   edi: 00000000   ebp: 00000000   esp: dd717a44
    ds: 007b   es: 007b   fs: 00d8  gs: 0000  ss: 0068
    Process khelper (pid: 1427, ti=dd716000 task=c2260a70 task.ti=dd716000)
    Stack: c02df2c0 f7a00000 f7a00000 00d41008 c02df691 00000000 00000010 00000002
	   00000001 f79f0000 f7fff844 c1398420 00000000 00000000 00001000 230a3020
	   69666564 5420656e 50434f49 465f544b 4853554c 44414552 0a312009 66656423
    Call Trace:
     [<c02df2c0>] start_io+0x80/0x120
     [<c02df691>] do_cciss_request+0x331/0x350
     [<c014242a>] mempool_alloc+0x2a/0xe0
     [<c020ad71>] blk_alloc_request+0x61/0x80
     [<c020b02e>] get_request+0x15e/0x1e0
     [<c01595e0>] cache_alloc_refill+0xb0/0x1e0
     [<c021049d>] as_update_rq+0x2d/0x80
     [<c0210d28>] as_add_request+0x68/0x90
     [<c0207f99>] elv_insert+0x119/0x160
     [<c020bd0b>] __make_request+0xcb/0x320
     [<c0122ee0>] lock_timer_base+0x20/0x50
     [<c0123096>] del_timer+0x56/0x60
     [<c020a7b8>] blk_remove_plug+0x38/0x70
     [<c020a815>] __generic_unplug_device+0x25/0x30
     [<c020a835>] generic_unplug_device+0x15/0x30
    ...
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: NMike Miller <mike.miller@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>