Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Some processors have groups of pins that aren't an even number of 16.
This causes the array size calculation to under count the number of
needed entries due to integer truncation.  So on the BF51x, while we
should have 3 bitmaps (41 / 16), we end up with 2 and pin requests for
the 3rd bank end up scribbling over the top of the GPIO IRQ array.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

With the Blackfin on-chip SPI peripheral, there is some logic tied to
the CPHA bit whether the Slave Select Line is controlled by hardware
(CPHA=0) or controlled by software (CPHA=1).  However, the Linux SPI
bus driver assumes that the Slave Select being asserted during the
entire SPI transfer.  So explain these small details for people who
need certain SPI modes with standard CS behavior.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The filesystem and cache files duplicate existing & better documents, and
these contain outdated information.  So punt them.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Newer parts have optional Hysteresis/Schmitt Trigger options to help with
dirty signals.  So add some kconfig options for tuning this and enable it
by default for people.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Random tabs instead of spaces, mixes of the two, and unicode spaces
instead of ascii spaces.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Add SSYNC to our implementation of I/O write barrier to ensure ordering
of I/O space writes.  This will make sure that writes following the
barrier will arrive after all previous writes.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The dma_memcpy() function takes care of flushing different caches for us.
Normally this is what we want, but when resuming from mem, we don't yet
have caches enabled.  If these functions happen to be placed into L1 mem
(which is what we're trying to relocate), then things aren't going to
work.  So define a non-cache dma_memcpy() variant to utilize in situations
like this.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Even though the PH8 pin is only internal to the processor packaging, it
can be controlled like any other GPIO pin.  Now that we have a proper GPIO
define, we can fix the SPI0 CS4 define for the internal SPI flash.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

This is parallel to the existing P_DEFAULT_BOOT_SPI_CS, but in terms of
the GPIO value so it can be used with the normal gpio API.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Run ONES on the incoming value rather than random garbage.  This fixes
random crashes with some networking code.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The duplicated bit banging logic is getting out of hand, so unify the
local API to make management a lot easier.  This also makes the code
a lot easier to follow.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Anomaly 05000491 says that IFLUSH cannot have certain types of memory
stalls triggered before it has completed in order to function correctly.
One such condition is that it be in L1 instruction.  So add a config
option to move it there, default it to on, and throw up a warning when
it is turned off and this anomaly exists.

Since the anomaly should be worked around, we can drop the older method
of calling IFLUSH multiple times.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Design found that these anomalies had the same root issue, so they've
merged 475 into 220.  We need to do the same to update to the latest
anomaly sheets.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Keep all anomaly/arch checks in one place to keep logic simple.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Rather than do our own thing, use what common code provides.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The Blackfin processor has no FPU, so there are no FPU regs to dump.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

These are useful when working with C structs of MMRs as the appropriate
size is selected based on the given argument.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Now that the NFC driver has its own defines, scrub the ones from the
global namespace to avoid ugly collisions with common code.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (204 commits)
  agp: intel-agp: do not use PCI resources before pci_enable_device()
  agp: efficeon-agp: do not use PCI resources before pci_enable_device()
  drm: kill BKL from common code
  drm/kms: Simplify setup of the initial I2C encoder config.
  drm,io-mapping: Specify slot to use for atomic mappings
  drm/radeon/kms: only expose underscan on avivo chips
  drm/radeon: add new pci ids
  drm: Cleanup after failing to create master->unique and dev->name
  drm/radeon: tone down overchatty acpi debug messages.
  drm/radeon/kms: enable underscan option for digital connectors
  drm/radeon/kms: fix calculation of h/v scaling factors
  drm/radeon/kms/igp: sideport is AMD only
  drm/radeon/kms: handle the case of no active displays properly in the bandwidth code
  drm: move ttm global code to core drm
  drm/i915: Clear the Ironlake dithering flags when the pipe doesn't want it.
  drm/radeon/kms: make sure HPD is set to NONE on analog-only connectors
  drm/radeon/kms: make sure rio_mem is valid before unmapping it
  drm/agp/i915: trim stolen space to 32M
  drm/i915: Unset cursor if out-of-bounds upon mode change (v4)
  drm/i915: Unreference object not handle on creation
  ...

* 'kms-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb,docs: Update the kgdb docs to include kms
  drm_fb_helper: Preserve capability to use atomic kms
  i915: when kgdb is active display compression should be off
  drm/i915: use new fb debug hooks
  drm: add KGDB/KDB support
  fb: add hooks to handle KDB enter/exit
  kgdboc: Add call backs to allow kernel mode switching
  vt,console,kdb: automatically set kdb LINES variable
  vt,console,kdb: implement atomic console enter/leave functions

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  debug_core,kdb: fix crash when arch does not have single step
  kgdb,x86: use macro HBP_NUM to replace magic number 4
  kgdb,mips: remove unused kgdb_cpu_doing_single_step operations
  mm,kdb,kgdb: Add a debug reference for the kdb kmap usage
  KGDB: Remove set but unused newPC
  ftrace,kdb: Allow dumping a specific cpu's buffer with ftdump
  ftrace,kdb: Extend kdb to be able to dump the ftrace buffer
  kgdb,powerpc: Replace hardcoded offset by BREAK_INSTR_SIZE
  arm,kgdb: Add ability to trap into debugger on notify_die
  gdbstub: do not directly use dbg_reg_def[] in gdb_cmd_reg_set()
  gdbstub: Implement gdbserial 'p' and 'P' packets
  kgdb,arm: Individual register get/set for arm
  kgdb,mips: Individual register get/set for mips
  kgdb,x86: Individual register get/set for x86
  kgdb,kdb: individual register set and and get API
  gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol
  kgdb: remove custom hex_to_bin()implementation

* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (63 commits)
  of/platform: Register of_platform_drivers with an "of:" prefix
  of/address: Clean up function declarations
  of/spi: call of_register_spi_devices() from spi core code
  of: Provide default of_node_to_nid() implementation.
  of/device: Make of_device_make_bus_id() usable by other code.
  of/irq: Fix endian issues in parsing interrupt specifiers
  of: Fix phandle endian issues
  of/flattree: fix of_flat_dt_is_compatible() to match the full compatible string
  of: remove of_default_bus_ids
  of: make of_find_device_by_node generic
  microblaze: remove references to of_device and to_of_device
  sparc: remove references to of_device and to_of_device
  powerpc: remove references to of_device and to_of_device
  of/device: Replace of_device with platform_device in includes and core code
  of/device: Protect against binding of_platform_drivers to non-OF devices
  of: remove asm/of_device.h
  of: remove asm/of_platform.h
  of/platform: remove all of_bus_type and of_platform_bus_type references
  of: Merge of_platform_bus_type with platform_bus_type
  drivercore/of: Add OF style matching to platform bus
  ...

Fix up trivial conflicts in arch/microblaze/kernel/Makefile due to just
some obj-y removals by the devicetree branch, while the microblaze
updates added a new file.

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  apparmor: depends on NET

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  scripts/dtc: Fix a resource leak
  Documentation: fix ubuntu distro name
  MAINTAINERS: Update kbuild git URLs
  Add support for the C variable in the coccicheck script
  Add scripts/coccinelle/deref_null.cocci
  Add scripts/coccinelle/err_cast.cocci
  Add scripts/coccinelle/resource_size.cocci
  Add scripts/coccinelle/alloc/kzalloc-simple.cocci
  Add scripts/coccinelle/alloc/drop_kmalloc_cast.cocci
  Add Documentation/coccinelle.txt
  Add a target to use the Coccinelle checker
  scripts: decodecode: remove bashisms
  Makefile: clarify a comment
  checkkconfigsymbols.sh: Kconfig symbols sometimes have lowercase letters
  scripts: add nconf into gitignore file

* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: Change section of generated debian packages to kernel
  kbuild: Mark that the packages generated conform to Standards-Version 3.8.4
  kbuild: Add homepage field to debian/control file

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (26 commits)
  kconfig: add savedefconfig
  kconfig: code refactoring in confdata.c
  kconfig: refactor code in symbol.c
  kconfig: add alldefconfig
  kconfig: print more info when we see a recursive dependency
  kconfig: save location of config symbols
  kconfig: change nonint_oldconfig to listnewconfig
  kconfig: rename loose_nonint_oldconfig => oldnoconfig
  kconfig: use long options in conf
  kconfig: fix MODULES-related bug in case of no .config
  kconfig: make randconfig fair for booleans
  kconfig: Don't write invisible choice values
  kbuild: Warn on selecting symbols with unmet direct dependencies
  scripts:conf.c Fix warning: variable 'type' set but not used
  menuconfig: truncate list items
  menuconfig: fix to center checklist correctly in a corner case
  xconfig: add support to show hidden options which have prompts
  xconfig: remove unused function
  xconfig: clean up
  gconfig: fix null pointer warning
  ...

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  modpost: support objects with more than 64k sections
  trivial: fix a typo in a filename
  frv: clean up arch/frv/Makefile
  kbuild: allow assignment to {A,C}FLAGS_KERNEL on the command line
  kbuild: allow assignment to {A,C,LD}FLAGS_MODULE on the command line
  Kbuild: Add option to set -femit-struct-debug-baseonly
  Makefile: "make kernelrelease" should show the correct full kernel version
  Makefile.build: make KBUILD_SYMTYPES work again

* 'modules' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: cleanup comments, remove noinline
  module: group post-relocation functions into post_relocation()
  module: move module args strndup_user to just before use
  module: pass load_info into other functions
  module: fix sysfs cleanup for !CONFIG_SYSFS
  module: sysfs cleanup
  module: layout_and_allocate
  module: fix crash in get_ksymbol() when oopsing in module init
  module: kallsyms functions take struct load_info
  module: refactor out section header rewriting: FIX modversions
  module: refactor out section header rewriting
  module: add load_info
  module: reduce stack usage for each_symbol()
  module: refactor load_module part 5
  module: refactor load_module part 4
  module: refactor load_module part 3
  module: refactor load_module part 2
  module: refactor load_module
  module: module_unload_init() cleanup

* 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  virtio_blk: Remove VBID ioctl
  virtio_blk: Add 'serial' attribute to virtio-blk devices (v2)
  virtio_blk: support barriers without FLUSH feature

* 'upstream/xen' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (23 commits)
  xen/panic: use xen_reboot and fix smp_send_stop
  Xen: register panic notifier to take crashes of xen guests on panic
  xen: support large numbers of CPUs with vcpu info placement
  xen: drop xen_sched_clock in favour of using plain wallclock time
  pvops: do not notify callers from register_xenstore_notifier
  Introduce CONFIG_XEN_PVHVM compile option
  blkfront: do not create a PV cdrom device if xen_hvm_guest
  support multiple .discard.* sections to avoid section type conflicts
  xen/pvhvm: fix build problem when !CONFIG_XEN
  xenfs: enable for HVM domains too
  x86: Call HVMOP_pagetable_dying on exit_mmap.
  x86: Unplug emulated disks and nics.
  x86: Use xen_vcpuop_clockevent, xen_clocksource and xen wallclock.
  implement O_NONBLOCK for /proc/xen/xenbus
  xen: Fix find_unbound_irq in presence of ioapic irqs.
  xen: Add suspend/resume support for PV on HVM guests.
  xen: Xen PCI platform device driver.
  x86/xen: event channels delivery on HVM.
  x86: early PV on HVM features initialization.
  xen: Add support for HVM hypercalls.
  ...

I'm trying to generate a <set> of <book>s in docbook for wireless to
link together all the cfg80211 and mac80211 documentation.

However, docbook will generate "re01.html" anew for each book for the
first <refentry>, presumably due to a bug in the stylesheets.

An effective workaround is to use IDs for the filenames, which makes
them more descriptive as well, e.g.  API-enum-ieee80211-band.html.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixed some typos and wording.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update section 3.7 examples to reflect the current state of the
Makefiles used. Fix spelling and grammar errors along with flow of text.
Signed-off-by: Nmatt mooney <mfm@muteddisk.com>
Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update section 3.2 and 3.5 example, along with text in section 3.5
to reflect change.
Signed-off-by: Nmatt mooney <mfm@muteddisk.com>
Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update section 3.3 Loadable module goals - obj-m, from $(<module_name>-objs)
to $(<module_name>-y) for easier addition of conditional objects to the
module. The examples are also updated to reflect the current state of
each Makefile used.
Signed-off-by: Nmatt mooney <mfm@muteddisk.com>
Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>