Introduce acpi_dispatch_gpe() as a wrapper around acpi_ev_detect_gpe()
for checking if the given GPE (as represented by a GPE device handle
and a GPE number) is currently active and dispatching it (if that's
the case) outside of interrupt context.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Version 20180508.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Version 20180427.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Replace "\___" with actual descriptive text.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Provide a new lock type acpi_raw_spinlock which is implemented as
raw_spinlock_t on Linux. This type should be used in code which covers
small areas of code and disables interrupts only for short time even on
a realtime OS.
There is a fallback to spinlock_t if an OS does not provide an
implementation for acpi_raw_spinlock.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

CPPC V3 introduces two new entries to make it easier to convert between
abstract processor performance and frequency. The two new entries are
lowest frequency and nominal frequency. These are the frequencies
corresponding to lowest and nominal abstract performance.

Add support to read the new entries and populate them as part of the
CPPC performance capabilities which can be used by cpufreq drivers
Signed-off-by: NPrashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently the ACPI scan has special handling for serial bus slaves, in that
it makes it the responsibility of the slave device's parent to enumerate
the device.

To support other types of slave devices which require the same special
handling but where the bus is not strictly a serial bus, such as devices on
the HiSilicon LPC controller bus, rename acpi_is_serial_bus_slave() to
acpi_device_enumeration_by_parent(), so that the name can fit the wider
purpose.

Also rename the associated device flag acpi_device_flags.serial_bus_slave
to .enumeration_by_parent.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

All uploaded PM data from non-dom0 CPUs takes the info from vCPU 0 and
changing only the acpi_id. For processors which P-state coordination type
is HW_ALL (0xFD) it is OK to upload bogus P-state dependency information
(_PSD), because Xen will ignore any cpufreq domains created for past CPUs.

Albeit for platforms which expose coordination types as SW_ANY or SW_ALL,
this will have some unintended side effects. Effectively, it will look at
the P-state domain existence and *if it already exists* it will skip the
acpi-cpufreq initialization and thus inherit the policy from the first CPU
in the cpufreq domain. This will finally lead to the original cpu not
changing target freq to P0 other than the first in the domain. Which will
make turbo boost not getting enabled (e.g. for 'performance' governor) for
all cpus.

This patch fixes that, by also evaluating _PSD when we enumerate all ACPI
processors and thus always uploading the correct info to Xen. We export
acpi_processor_get_psd() for that this purpose, but change signature
to not assume an existent of acpi_processor given that ACPI isn't creating
an acpi_processor for non-dom0 CPUs.
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>

Version 20180313.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This prepares the code for eventual removal of the original
style of deferred execution of the MLC.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Was acpi_gbl_parse_table_as_term_list, changed to:
acpi_gbl_execute_tables_as_methods.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Changes the option to ignore package resolution errors into
a runtime option.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

As the documentatuon above its declaration indicates, acpi_get_object_info()
is intended for early probe usage and as such should not call any methods
which may rely on op_regions, before this commit it was also calling _STA,
which on some systems does rely on op_regions.

Calling _STA before things are ready leads to errors such as these
(under Linux, on some hardware):

[    0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c)
               [generic_serial_bus] (20170831/evregion-166)
[    0.123601] ACPI Error: Region generic_serial_bus (ID=9) has no handler
               (20170831/exfldio-299)
[    0.123618] ACPI Error: Method parse/execution failed
               \_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550)

End 2015 support for the _SUB method was removed for exactly the same
reason. Removing current_status from struct acpi_device_info only has a limited
impact. Within ACPICA it is only used by 2 debug messages, both
of which are modified to no longer print it with this commit.

Outside of ACPICA, there was one user in Linux, which has been patched to
no longer use current_status in Torvald's current master.

I've not checked if free_BSD or others are using the current_status field.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

After being enabled for the first time, the GPEs may have STS bits already
set. Setting EN bits is not sufficient to trigger the GPEs again, so this
patch polls GPEs after enabling them for the first time.
This is a cleaner version on top of the "GPE clear" fix generated according
to Mika's report and Rafael's original Linux based fix. Based on Linux
commit originated from Rafael J. Wysocki, fixed by Lv Zheng.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

EDAC driver needs to look up attributes of NVDIMMs provided in SMBIOS.

Provide a function that looks up an acpi_nfit_memory_map from a device
handle (node/socket/mc/channel/dimm) and returns the SMBIOS handle.
Also pass back the "flags" so we can see if the NVDIMM is OK.
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Erik Schmauss <erik.schmauss@intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Robert Moore <robert.moore@intel.com>
Cc: devel@acpica.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
Link: http://lkml.kernel.org/r/20180312182430.10335-4-tony.luck@intel.comSigned-off-by: NBorislav Petkov <bp@suse.de>

ACPICA commit 6e3468837f9f32f64c7d0a6e20bf0d2579411d43

Version 20180209.

Link: https://github.com/acpica/acpica/commit/6e346883Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit a6c3c725c44dd44ad9d3f2b2a64351fdbe6e0014

For the kernel-resident ACPICA, optionally be silent about the
NOT_FOUND case. Although this is potentially a serious problem,
it can generate a lot of noise/errors on platforms whose
firmware carries around a bunch of unused Package objects.
To disable these errors, define ACPI_IGNORE_PACKAGE_RESOLUTION_ERRORS
in the OS-specific header.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=198167
Link: https://github.com/acpica/acpica/commit/a6c3c725Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 8faf6fca445eb7219963d80543fb802302a7a8c7

This change completes the integration of the recent changes to
package object handling with the module-level code support.

For acpi_exec, the -ep flag is removed.

This change allows table load to behave as if it were a method
invocation. Before this, the definition block definition below would
have loaded all named objects at the root scope. After loading, it
would execute the if statements at the root scope.

DefinitionBlock (...)
{
  Name(OBJ1, 0)

  if (1)
  {
    Device (DEV1)
    {
      Name (_HID,0x0)
    }
  }
  Scope (DEV1)
  {
    Name (OBJ2)
  }
}

The above code would load OBJ1 to the namespace, defer the execution
of the if statement and attempt to add OBJ2 within the scope of DEV1.
Since DEV1 is not in scope, this would incur an AE_NOT_FOUND error.
After this error is emitted, the if block is invoked and DEV1 and its
_HID is added to the namespace.

This commit changes the behavior to execute the if block in place
rather than deferring it until all tables are loaded. The new
behavior is as follows: insert OBJ1 in the namespace, invoke the if
statement and add DEV1 and its _HID to the namespace, add OBJ2 to the
scope of DEV1.

Bug report links:
Link: https://bugs.acpica.org/show_bug.cgi?id=963
Link: https://bugzilla.kernel.org/show_bug.cgi?id=153541
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196165
Link: https://bugzilla.kernel.org/show_bug.cgi?id=192621
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197207
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198051
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198515

ACPICA repo:
Link: https://github.com/acpica/acpica/commit/8faf6fcaTested-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit a025731aec31745b775f7bdcd850c57d0a08298d

Split/restructure:
Table headers (actbl1*.h)
disassembler table info files (dmtbinfo*.c)
disassembler table dump files (dmtbdump*.c)

Adds 6 new files.

Link: https://github.com/acpica/acpica/commit/a025731aSigned-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This is a patch that implements a generic hooking API for the
generic ACPI battery driver.

With this new generic API, drivers can expose platform specific
behaviour via sysfs attributes in /sys/class/power_supply/BATn/
in a generic way.

A perfect example of the need for this API are Lenovo ThinkPads.

Lenovo ThinkPads have a ACPI extension that allows the setting of
start and stop charge thresholds in the EC and battery firmware
via ACPI. The thinkpad_acpi module can use this API to expose
sysfs attributes that it controls inside the ACPI battery driver
sysfs tree, under /sys/class/power_supply/BATN/.

The file drivers/acpi/battery.h has been moved to
include/acpi/battery.h and the includes inside ac.c, sbs.c, and
battery.c have been adjusted to reflect that.

When drivers hooks into the API, the API calls add_battery() for
each battery in the system that passes it a acpi_battery
struct. Then, the drivers can use device_create_file() to create
new sysfs attributes with that struct and identify the batteries
for per-battery attributes.
Signed-off-by: NOgnjen Galic <smclt30p@gmail.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Version 20180105.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

including tool signons.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: NJung-uk Kim <jkim@free_BSD.org>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This is more easy to read.
Signed-off-by: NJung-uk Kim <jkim@free_BSD.org>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

We should not assume NULL is defined as "(void *)0" because NULL is
an implementation-defined macro.  Especially, Clang 6 complains about
it, i.e., "arithmetic on a null pointer treated as a cast from integer
to pointer is a GNU extension".
Signed-off-by: NJung-uk Kim <jkim@free_BSD.org>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

X32 follows ILP32 model. Check for ILP32 as well when checking for
x86_64 to ensure the defines are correct for X32 ABI.
Signed-off-by: NAnuj Mittal <anuj.mittal@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Sometimes the user wants to have device name of the match rather than
just checking if device present or not. To make life easier for such
users introduce acpi_dev_get_first_match_name() helper based on code
for acpi_dev_present().

For example, GPIO driver for Intel Merrifield needs to know the device
name of pin control to be able to apply GPIO mapping table to the proper
device.

To be more consistent with the purpose rename

  struct acpi_dev_present_info  -> struct acpi_dev_match_info
  acpi_dev_present_cb()         -> acpi_dev_match_cb()

in the utils.c file.
Tested-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 8b38d88e4a7151a7fc9451ac2e51c945c60b913b

Version 20171215.

Link: https://github.com/acpica/acpica/commit/8b38d88eSigned-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 35a4a3ea723b3066f575e63e5f0116f7ce65e713

The public Microsoft document listing recognized OSI strings [1]
shows that these two strings were introduced.
version 1607 / Anniversary Update / "Redstone 1"
version 1703 / Creators Update / "Redstone 2"

[1] http://download.microsoft.com/download/7/e/7/7e7662cf-cbea-470b-a97e-ce7ce0d98dc2/winacpi_osi.docx

Link: https://github.com/acpica/acpica/commit/35a4a3eaSigned-off-by: NMario Limonciello <mario.limonciello@dell.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit a7f73af9003bf4e730db5a133300c01ba7992a01

The data table compiler throws under the following conditions:
 1.) there is a table with a last field that is optional
 2.) if the optional field is not present
 3.) the optional field is the last line of the data table

A change was made to dt_compile_table to return an AE_EOF under
these conditions.  This AE_EOF means that we are at the end of the
file.  The caller to dt_compile_table() is responsible for handling
this case. For DBG2 table, we will complete the compilation of this
subtable.  For other tables, this could be different.

Link: https://github.com/acpica/acpica/commit/a7f73af9Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit d0ef5a72ca7c01acbf590e4556d19edf69a5b5c4

Version 20171110.

Link: https://github.com/acpica/acpica/commit/d0ef5a72Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit fba3ae99b2bc514ca34f0d7b2609c2a043582784

The ACPI 6.2 spec has flags to describe cache
allocation, write back, and whether
it is an instruction, data or unified cache.

Link: https://github.com/acpica/acpica/commit/fba3ae99Signed-off-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 9b03c05305d856274c39f3adbddd8a98ef5d018e

ACPI table header.

Link: https://github.com/acpica/acpica/commit/9b03c053Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit a42a086b8d682ab8dfbc4666cf6b9c8a5ee23a77

Adds a new subtable.

Link: https://github.com/acpica/acpica/commit/a42a086bSigned-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 62c3ff46de977456155fdedbd9f294f2ff700520

Fix spelling mistake, "Reseved" -> "Reserved"

Link: https://github.com/acpica/acpica/commit/62c3ff46Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 5c371879e035122c5807752f42247fd091d107d6

SMMUv3 device ID mapping index is used for SMMUv3
MSI which is introduced in IORT spec revision c,
add its support for iasl.

Tested with iasl -t IORT then get the right SMMUv3
node in iort.asl.

Link: https://github.com/acpica/acpica/commit/5c371879Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 2399a7799d6e41ec5beca77ddff3acc77e1a4e0a

Version 20170929

Link: https://github.com/acpica/acpica/commit/2399a779Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit 028d331522f239fa615148273f6d10e9deadb1b3

Full support for PDTT and SDEV
Partial support for TPM2 due to odd layout of the optional
fields of the table.

Link: https://github.com/acpica/acpica/commit/028d3315Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPICA commit e017213698374e01225f641ba0917516d8e91427

More appropriately renamed to AE_AML_LOOP_TIMEOUT, now that
a real timer is used for the implementation.

Link: https://github.com/acpica/acpica/commit/e0172136Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NErik Schmauss <erik.schmauss@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>